The operating instructions for the Indesit W105TX washing machine were created by the manufacturer in a style unusual for such documents. All text is accompanied by funny pictures that fit well into the instructions along with informative images. Apparently the manufacturer decided to increase the attractiveness of this document for the user, so that people would at least flip through it before turning on the machine. In this sense, our goals and the goals of the manufacturer coincide, so we decided to make the instructions simpler and more attractive.
Features of the Indesit WISL 105 machine
The Indesit WISL 105 operating instructions for this small-sized washing machine recommend its use for small families of a maximum of three people. It has a small capacity - only 4.5 kg with a machine depth of 40 cm. Despite this, the machine is very productive.
The instructions state that the speed of the machine drum reaches 1000 rpm. Despite the budgetary nature of the machine, it has an excellent selection of washing programs - there are 19 of them. They are supplemented by modes for selecting water temperature and spin speed.
The machine has programs for washing sportswear and shoes, quick wash, and wash in economy mode.
The machine is protected against water leaks.
Why wash with balls?
On the forums, experienced housewives recommend washing down jackets together with tennis balls. The benefit of such “neighbors” is that the balls, bouncing in the drum, prevent the insulation from crumpling and things from becoming deformed. However, there are several pitfalls:
- suitable balls are difficult to find;
- low-quality dyes can fade and stain the down jacket;
- Too heavy “rounds” can damage the drum even at minimum speed.
It is recommended to wash down products with special balls that will protect the insulation from knocking down and deformation.
To play it safe, we recommend replacing tennis balls with special ones. The latter are distinguished by the fact that they do not have dye on the surface and consist of dense rubber. Also a “bonus” will be the protrusions and spikes on the walls that will “massage” the jacket and save it from knocking down the insulation. Household massage balls will also work.
Why turn it inside out?
Having decided on the temperature and rotation power of the drum, we load the down jacket into the washing machine. But you can’t just stuff the product in – you need to first prepare it for washing. The first step is to check all the pockets so that a lost coin or keys do not pierce the tank of the machine. Next, we unhook all the removable elements, edges, brooches, collars, cuffs and hoods. Especially if they have natural fur inserts.
Before washing, the down jacket must be turned out, buttoned up and checked for forgotten items.
Be sure to fasten all the zippers and turn the jacket inside out so that the front side is on the inside. The fact is that such manipulation will enhance the effect of washing and protect the jacket from damage. Firstly, water and detergent will penetrate faster through the inner lining, which is now on top. This is important, since the insulation requires thorough cleaning, and the delicate cycle does not last that long. Secondly, turning it inside out hides all the metal fittings, rivets and zippers. All these protruding solid objects in the accelerating drum hit the walls, scratching not only the tank itself, but also the fabric.
Features of the Indesit WIUN 103 machine
The operating instructions for the Indesit WIUN washing machine indicate less powerful dimensions than the WISL 105. It has a smaller loading capacity. Here it will be 3.5 kg of laundry. The total number of selectable programs is 16.
Of the general washing programs characteristic of all Indesit machines, all basic options are present. The instructions state that the speed of the machine drum reaches 1000 rpm. Additional options: foam control function, the machine has programs for washing sportswear and shoes, quick wash, washing in economy mode. The machine is protected against water leaks.
There is no child lock feature.
Common possible malfunctions of Indesit machines
If Indesit washing machines malfunction, you need to determine whether there is smoke or leakage from the machine, whether several lights on the panel are flashing at the same time, and whether there is a smell of burnt plastic. If these problems are present, then you need to disconnect the machine from the power supply and immediately call a technician.
If the washing machine does not turn on, check how tightly the plug is pressed into the socket and whether the circuit breaker is tripped.
Water does not fill into the car - check if the door lock indicator is on, if there is water in the system, press the Start/Pause button.
If there are knocks or unusual noise from the drum during washing, stop washing and check the drum.
When spinning, the machine vibrates too much - the laundry is not distributed correctly in the drum - there is too much of it.
Major breakdowns
Rinse or spin mode does not turn on
Before rinsing, the machine stops, starts draining water and displays an error. There are 2 LEDs blinking on the panel: above the button with the image of a clock and with the “lock” icon.
Error code F08 means the relay for turning on the heating element is stuck, a signal if there is emptying. Or the pressure switch is stuck in the “filling” position.
To resolve this error, you should check:
- pins of connector J3 on the board
- state of the reset switch by ringing it on the connectors
- wires connecting the transfer switch to J3 connectors
- the need to replace the pressure switch, control board or heating element
Most often, such an error code signals a damaged heating element, the main heating element. This part is easy to replace yourself and is accessible through the rear panel.
Water leakage
The presence of a leak indicates a hole in the rubber cuff sealing the hatch. If the cuff is not damaged, but water is leaking, you should clean the lower part of the door glass from the inside.
During operation, dirt accumulates in this place, worsening the contact between the glass and the rubber seal. To eliminate this problem, simply wipe the glass with a cotton swab dipped in nail polish remover.
Article on the topic: How to dye jeans blue in the washing machine
Washing machines of the Wisl series provide additional protection for the housing against leaks.
The washing machine does not turn on
If the washing machine does not respond when you press the power button, you need to check the serviceability of the socket.
Disconnect the cord plug from the outlet and plug in any other electrical device, for example, a table lamp. If the outlet is working properly, you need to visually inspect the power cord for damage.
A complete failure of the machine to operate may indicate a malfunction of the electronic control module and requires specialist intervention.
If the machine turns on but does not start the washing program, you need to check that the door is closed tightly.
Various blockages
Blockages in the drain system are considered one of the main problems with Indesit washing machines. If the drain hose and filter are clogged, the machine stops draining water. If the model is equipped with a display, error code F05 is displayed on it.
Cleaning the filters yourself is not difficult even for those who do not have the skills to handle equipment. To clear the blockage, you need to open the bottom door on the front panel, lay rags on the floor or place a flat tray and pull out the catch filter, rotating it counterclockwise.
Garbage and small objects (coins, buttons, pins) accumulate here. After cleaning the filter, the unit is ready for use. This procedure is recommended to be done once every few months as a preventative measure.
Failure of parts
The Italian brand Indesit complies with European technical standards. Washing machines of this brand have vulnerabilities that you should pay attention to when operating and repairing the devices.
The following parts are subject to frequent breakdowns:
- Surge filter - can withstand operation for up to 4 years, often defective
- Heating element (tubular heating element) - made of stainless steel without coating, which leads to rapid scale fouling
- Electric motor parts - capacitors, trim and tachogenerator sensor
- Depressurization of the door seal
Experts consider replacing bearings to be difficult to repair due to the tank being welded tightly. Often, owners of the Indesit Wisl automatic machine contact the service due to blockages in the drain system.
Breakdowns occur due to improper connection of equipment, careless handling of the machine, or as a result of natural wear and tear.
Bearings
A special feature of the Indesit washing machine is its lightweight, sealed tank. This is the weak point of the unit, due to which bearings often break. The design of the tank does not allow you to disassemble it yourself; it is better to contact a workshop where the tank will be completely replaced. This is an expensive operation, so sometimes it is cheaper to purchase a new device.
Article on the topic: How to open an aeg washing machine
A number of Indesit models produced in Italy, Turkey and some other countries provide the ability to replace bearings. Only a qualified technician can determine whether the device can be repaired.
Control module
The electronic control module in Wisl series machines is highly reliable. It is equipped with an automatic protection system that is triggered if the operating requirements of the machine are not met.
The control module of the Indesit washing machine is sensitive to air humidity, drops of water entering the system or voltage drops.
In order to “please” the electronics, you should strictly follow the instructions included with the device.
If a module error code is displayed on the panel, you need to check:
- condensation on current-carrying circuits
- reliability of contact fastening
- presence of oxidations
- no blockages in the drain hose and filter
- accumulation of dirt on components and parts.
After eliminating inconsistencies with the program requirements, the machine can be restarted - many models support starting the cycle from the middle.
Electric motor
A commutator type electric motor is installed here.
The most common problems:
- Brushing of brushes. Occurs if you use the device too often. When starting the program, it does not start working, which indicates a breakdown of the main motor brushes. The parts are paired and must be replaced at the same time for correct operation of the motor.
- Peeling of lamellas on the collector. The lamellas peel off most often in old devices when the brushes rub them into holes.
- Break or interturn short circuit in the rotor and stator windings. If there are any signs of winding burning, the motor must be completely replaced.
Electric motor failure is also determined by the lack of rinsing and spinning. If the washing machine heats the water and washes, but when moving to the final modes the engine starts to turn idle, this means that the engine is broken and must be replaced.
Shock absorber and dampers
The shock absorber is an elongated device, inside of which there is a piston with a return spring. They serve to reduce drum vibrations.
Dampers are devices similar to shock absorbers, they differ in the absence of a return spring. Dampers are installed in new models of washing machines.
If the tank knocks during washing and vibrates with a hum, it is worth checking the condition of the shock absorbers. The lack of lubrication in them is indicated by the characteristic creaking and tight rotation of the drum.
Some washing machine owners save on parts by replacing the rubber insert in the old shock absorber. This method does not guarantee correct operation of the device; it is better to purchase a new working shock absorber.
Article on the topic: How to disassemble a semi-automatic lg washing machine
water pump
The pump is part of the drainage system of the washing machine and performs the important function of pumping water out of the tank. This part experiences the greatest loads and can quickly fail. You can determine if the pump is faulty by hearing.
Signs of pump failure:
- When draining water, the pump makes a loud noise, but no water flows into the tank.
- Pump doesn't work
Before changing the pump, you should make sure the drainage system is clean. Inspect and, if necessary, clean the drain filter, hose and drain pump impeller. Find out if there are any foreign objects in the system.
If the above measures do not help, the pump must be replaced.
Water supply problem
If problems arise with the water supply, you need to check the presence of pressure in the tap, and then inspect the inlet hose and its filter.
The washing machine does not fill with water well
If the pump does not fill the tank with water, this may indicate a clogged filter in the fill valve. You should turn the unit away from the wall and unscrew the drain hose from the rear panel. Using pliers, pull out the fill valve filter and then rinse it well under running hot water. If necessary, clean with a brush.
The washing machine does not fill with water
If the washing machine does not fill with water, you need to check:
- connecting the inlet hose to the tap
- hose for kinks and kinks
- tap water pressure
- water supply tap open/closed
- pressing the "Start" button
If you suspect a blockage, you need to turn off the water supply to the washing machine, unscrew the inlet hose, direct it into the basin and resume the water supply. This will allow you to rinse it free of debris.
It is recommended to check the inlet hose at least once a year and replace it immediately if there is any suspicion of a leak. Do not install used hoses.
The supply of washing powder is interrupted
If the powder does not pass through the washing machine, and water flows out of the tray where it is poured, this indicates a blockage.
To solve the problem, carefully pour a small amount of boiling water into the tray. A similar problem occurs when using poor quality washing powder or too low pressure in the pipe that connects the tray and the tank of the machine.
As a result, a dense powder plug is formed, which prevents water from entering the tank. Periodically it is worth rinsing the cuvette itself under running water.
- WG1035txc. A distinctive feature of this modification is the presence of additional settings for each main program. For example, not just “synthetics”, but several options - with fabric softening, anti-shedding and for durable colored products. Additionally, automatic addition of softening agents is installed.
- IWDC 6105. There is a non-standard “light sports” option - for washing lightly soiled sportswear for fitness, yoga or swimming. There is a “quick dry wash” - it quickly washes and dries things. Half load. Ready time: 15 minutes.
- WISL 105. Only one additional option - “everyday wash at 30 °C”. Applicable to synthetics with minor stains. Allows you to save water and electricity. It is recommended to use liquid detergents.
- WISL 102. In addition to “daily care 30 degrees”, there is also “light ironing” - its activation depends on the tolerance of the selected program, load and temperature.
- WIT 60. Budget version without additional options. But there is a “water stop” function.
- WIUN 102. There is “daily washing of synthetics” at 30 degrees.
Article on the topic: Who from the American state of Indiana invented the washing machine
A distinctive feature of the Indesit model range is its conservative control panel. It is easy to understand, since almost every icon is duplicated with an inscription. Simple operation is the key to “mutual understanding” between the user and the technology.
Correct installation is important!
For the Indesit W105TX washing machine, the instructions especially emphasize the importance of correct installation of the “home assistant,” rightly pointing out that its service life and the frequency of breakdowns depend on this. It would seem why, because the machine is created as a completely self-sufficient household appliance. Let's figure it out.
- The manufacturer's instructions indicate that the machine should be placed level on a flat and strong surface. What happens if you place the washing machine on a swaying wooden floor without leveling the position of the body? The answer is very simple. The negative influence of centrifugal force, which is already significant during high-speed spinning, will increase many times over, destroying the insides of the equipment, causing it to fail at least 2 times faster.
If the body of the machine is not leveled, the “home assistant” may begin to “jump” or even fall over on its side.
- Let's assume that we connect the washing machine to the sewer incorrectly. What can happen. Firstly, the “siphon effect” is when water from the sewer, obeying the laws of physics, rushes back into the washing machine. Secondly, a simple leak if you did not secure the drain hose during installation. Thirdly, failure of the drain pump due to excessive load.
- Incorrect connection of the hose that supplies water to the washing machine can result in a breakdown of the inlet valve, a leak with subsequent flooding of the room, or the washing machine will simply generate a system error and refuse to work.
- If the machine is connected incorrectly to the power supply, not only the washing machine and the user himself may suffer. In the worst case, the machine can cause electric shock; in the best case, the power supply filter will fail. So be very careful when installing, or better yet, entrust this task to a professional.
