Starting a washing machine after purchase - what needs to be done

How to set a delay on a Samsung washing machine?

Turn on the machine by pressing the On/Off button. Select the washing mode, adjust the spin intensity and temperature. Press the “Delay” button until you set the desired time until the end of the wash.

Interesting materials:

How to stay in Schengen for more than 90 days? How to write an application for 1 day of vacation? How to write an application for a day at your own expense? How to write an application for leave for the remaining days? How to write an application for a day off? How to write an application for a 5-day vacation? How is your pension calculated today? How to set a wedding day? What is the name of March 21st? What is the name of the day before Easter?

Preliminary preparation

How you start the washing machine for the first time determines its service life. It is enough to do something wrong for the device to fail and you will have to repair a car that has not yet been used. In any case, having purchased a washing machine, before turning on the washing machine for the first time, you must carefully study the instructions.

Before washing clothes in a new machine for the first time, you should check how correctly it is connected:

• The rubber pipe must be connected to the outlet of the water supply, and the drain hose (usually corrugated) is connected to the siphon or to the sewer;
• If the outlet to the sewer has not yet been made, then the drain hose can be secured to the edge of the sink or bathtub so that the water drains there temporarily. When draining the water, the pressure from the machine is quite strong, so the hose should be securely fastened so that it does not fly off and the water does not spill onto the floor;
• The drum fastening bolts installed during transportation must be removed. If you leave them and do not unscrew them, then during operation the washing machine will rattle and vibrate strongly, until a malfunction occurs. The holes from the mounting bolts must be closed with special plugs included in the kit;

• The packaging and tape that secure the detergent container, hatch and other parts of the machine should be completely removed from the machine;
• The drum must be carefully inspected for any foreign objects that have accidentally fallen into it;
• The washing machine must be placed on a hard and level surface so that there is no vibration during operation.

To make the device consume less electrical energy:

• The drum should not be overloaded beyond the norm established by the manufacturer;
• Do not machine wash items that are not designed to be machine washed;
• Do not allow metal objects to get into the drum, which could damage the drum and laundry.

Manufacturer

Washing machine manufacturer Samsung is an experienced player in the global household appliances market. Its history began back in 1938, and the Samsung brand itself was registered in 1948.

Where are Samsung washing machines made?

The Samsung brand belongs to a Korean company of the same name. The word is translated as “three stars,” which symbolizes the connection with the three sons of the company’s founder.

Do not think that Samsung washing machines are produced only in Korea. To date, production facilities have been established in China, the USA, Russia, Poland and other countries.

The products are aimed at a wide consumer, so the manufacturer cares about its quality and maintaining the image of a global brand. This article will tell you where Samsung washing machines are assembled.

Technologies

Exclusive technologies of Samsung washing machines:

1. AddWash.
   It allows you to add items to the appliance after starting the wash cycle. For this purpose, an additional door is provided in the hatch. Thanks to its presence, you can reload forgotten items, or add them to the drum only for rinsing or spinning.
2. Eco Bubble is an option that involves turning on a foam generator. It promotes deeper penetration of the detergent into the fabric fibers and better removal of dirt.
3. Samsung Smart Home. Thanks to this technology, the washing machine is synchronized with a smartphone or laptop. This allows you to control the device remotely.
4. Volt Control. This technology is aimed at protecting the washing machine from voltage surges.
5. Diamond Drum. It has a special relief, which leads to less tissue damage during spinning.
6. VRT+ - vibration prevention technology.
7. Aqua Stop – an option to shut off the water supply if it leaks.
8. Can Balance is a drum balancing technology.
9. Child lock. Activating this option allows you to lock the panel.

The range of technologies may differ depending on the washing machine model. The more expensive the device, the more options it has.

Advantages and disadvantages

The main advantages of Samsung automatic machines include:

1. High quality electronics, the presence of powerful technological components.
2. Intuitive interface.
3. An abundance of programs and additional modes even on budget models.
4. A wide range of products allows you to choose a device based on your personal needs and financial capabilities.
5. Stylish futuristic design.
6. Service maintenance. Availability of branded workshops in most localities.

The main disadvantage of Samsung washing machines is their high noise level. This drawback is especially noticeable during spin startup.

Although the manufacturer claims that its equipment is “super quiet”. However, it should be noted that the hum produced by the drum is uniform and is not capable of affecting the quality of life of the owner of the device.

The weaknesses of the equipment include frequent bin leaks and damage to the drainage system.

Device

The main elements of Samsung washing machines:

• electric motor;
• tank;
• water pump;
• pipes;
• tray for receiving detergents;
• shock absorbers;
• heating element;
• drain filter;
• electric pump;
• drum pulley;
• snail;
• temperature control sensor;
• counterweights;
• hatch blocking device, cuff;
• control module;
• water level sensor;
• drain block;
• hose;
• control Panel.

The body itself is represented by side, top, front and back covers, as well as a bottom. Depending on the type of loading, the hatch can be located horizontally or vertically. In Russia, models of the first subspecies are predominantly found.

You can learn how a Samsung washing machine works from this article.

Dimensions and weight

The width, depth and height of Samsung washing machines are different. There are three size options:

1. Standard. Their width is 60 cm, height – 85 cm, depth 60 cm. They are designed for a load of 7-10 kg.
2. Narrow models. Their dimensions are: height 85-90 cm, depth 32-45 cm, width - 60 cm. The average load of such a device is 5-6 kg.
3. Compact machines, the dimensions of which are: width 45-50 cm, depth - 45 cm, height - 70 cm. Such devices are designed for a load of 3-4 kg.

Vertical models have the following parameters: height - from 85 to 95 cm, depth - 60 cm, width 40-45 cm. The weight of most machines is 70 kg, although some models can weigh up to 85-90 kg.

Read more about the sizes of Samsung washing machines here.

Design Features

from Samsung - a honeycomb drum, the holes of which are smaller compared to models from other manufacturers. They are placed in peculiar faceted recesses, and in some models the rows of recesses are arranged in a wave-like manner.

This design prevents fabric fibers from being pulled out during the washing process and allows the laundry to easily slide along the walls of the drum and not tangle. The washed item has no snags, pilling or other damage.

A standard Samsung washing machine with Eco Bubble is equipped with a reliable ceramic heater that does not form scale (the manufacturer claims trouble-free operation of this element for 10 years) and a surge protection system (safe operation within 165-275 V) .

In case of a sharp surge (up to 400 V), the system ensures that the washing cycle is suspended and resumed after the network voltage has stabilized.

Most consumers claim that the weight of the machine is too large, especially considering its compact dimensions, about 63 kg. This is despite the fact that the mass of most models of modern washing machines is 56-60 kg. The difference is small, but nevertheless it exists.

However, this is not at all a reason to say a decisive “no” to the purchase. As for the management, most people are completely delighted. Switching modes is done simply by turning the wheel.

The machine has a classic front-loading system. Most users prefer this type of laundry load. An undoubted advantage is that the car has electronic control.

Important! The instructions for Samsung Eco Bubble 6 kg make it easy to understand the controls. The machine is equipped with a timer and an electronic display, which makes it possible to monitor washing parameters.

Loading volume A drum designed for 6 kg of laundry is considered optimal by many buyers. However, in the Samsung Eco Bubble line there are models designed for 8 kg.

Important! It should be taken into account that many washing devices with the same load volume, compared to the Samsung Eco Bubble 6 kg, are not nearly as compact.

How to disable Indesit?

The methods of resetting the settings discussed above are universal. But there are special cases characteristic of certain models. Some are not equipped with a “start/pause” button; for others, the developers have come up with a special algorithm of actions. Let's figure out how to act as owners of SMA "Indesit".

To turn on the washing, turn the control toggle switch and, having set the appropriate mode, press the button with a diamond. Procedure:

• Click on the diamond. Don't let go for 5-6 seconds.
• If the machine is working properly, the current settings will be reset.
• On outdated versions, you should perform one more action - set the toggle switch to neutral.

Life time

The service life of Samsung washing machines is about 8-10 years, but these data are averaged.
How long the device will work is influenced by the activity of its operation, the quality of the detergents used, the degree of water hardness, assembly features, and the absence of manufacturing defects.

The features of using the device are important. If a person regularly violates the rules of the instructions and overloads the machine, then it will fail faster.

In accordance with GOST 8051-83 standards, the average service life of washing machines must be at least 15 years or 700 hours of operation. However, in fact, there are very few such devices on the market.

Precautionary measures

• Image
• Text

10_ precautions

EXPLOSIVE GAS. If your hot water system has not been used for

two weeks or more, open all hot water taps in your home and let

let the water drain for a few minutes before using the washing machine

by car. This will allow all the hydrogen produced to escape. At this time you should not

Smoking and lighting open fires, as hydrogen is flammable. If there is a leak

gas, ventilate the room immediately without touching the power plug. Do not climb on or place things on the machine (such as laundry, lighted candles,

outstanding cigarettes, dishes, chemicals, metal objects, etc.).

— This may result in electric shock, fire, machine failure, or personal injury. Do not spray volatile substances, such as insecticides, on the surface

cars.

- In addition to being harmful to people, they can also cause stroke

electric shock, fire or machine breakdown.

Do not place devices that create electromagnetic emissions near the washing machine.

fields.

— This may result in injury due to machine malfunction. Since the water drained during washing and drying is at a high temperature, it is not

allow contact with this water.

— This may cause burns or injury. Do not wash, wring or dry waterproof seat covers.

mats or clothes (*) if your machine does not have a special washing program

these things.

— Do not wash thick, hard mats.

— Doing so may cause injury or damage the washing machine, walls, floor, or

clothing due to excessive vibration.

* Wool bedding, rain covers, fishing vests,

ski pants, sleeping bags, baby diapers, sports jerseys

suits, as well as awnings for covering bicycles, motorcycles, cars, etc.

Do not operate the machine unless the detergent box is in place.

place.

— This may result in electric shock or injury due to water leakage. Do not touch the inside of the tank during or immediately after drying as

she's hot.

- This may cause burns. Do not put your hand in the detergent box after you open it.

— This may cause injury as your hand may be caught

data input device for detergents. Do not put in washing machine

no objects (such as shoes, leftover food, animals) other than those that

washable.

— Due to strong vibration, this may cause damage to the washing machine or

injury and death of pets.

Do not press the buttons with sharp objects such as hairpins, knives, nails, etc.

— This may result in electric shock or injury. Do not wash laundry contaminated with oils, creams or lotions that are commonly

sold in specialty stores that sell skin care products, or in

massage clinics.

— This may cause spontaneous combustion or fire due to high

temperature that is created during the oxidation of oil.

Do not use hot water from water cooling/heating devices.

— This may cause problems with the washing machine. Do not use natural hand soap in the washing machine.

— If it hardens and accumulates in the washing machine, it may cause

problems with it, discoloration, the appearance of rust or unpleasant odors.

Do not wash large items, such as bedding, in a laundry net.

— Place socks and bras in a laundry net and wash them with other laundry.

— Failure to do so may result in injury due to strong vibrations.

precautionary measures

WF8590NM-02796G-10_EN.indd 10

2013-12-12 11:55:59

Comments

Select → I found the instructions for my washing machine here! #manualza

Click →

The brain of each of us is like a miracle mechanism. Only most have instructions for it in Chinese.

Manualza!manualza.ru

Testing Linear Components

The service test of a Samsung machine is conventionally divided into two stages, and the first of them is checking the linear components of the machine. It allows you to clearly verify the sufficient performance of linear components, such as:

The button responsible for selecting the water temperature turns on the valve testing mode. By pressing it, you can watch the tank begin to fill with water through the first section of the detergent dispenser. When you press the “Temperature” key again, water will begin to flow through the second section of the tray. This will check both sections of the fill valve. A third press will turn off the liquid filling into the drum.

One press of the “Spin” button will allow you to test the serviceability of the drain hose. The second is to turn on the Eco Bubble pump. A third press will turn off the pump. If you are sure that there are no problems with draining water from the drum, proceed directly to checking the Eco Bubble pump; to do this, quickly press the spin button twice in a row. Now look through the hatch door. Bubbles should begin to appear in the water with which the drum is filled, this indicates that the bubble wash function is functioning properly.

Causes, diagnosis and repair

You should be wary of the situation when an error appears on the display not for the first time. Its occurrence may be:

• unsystematic - from time to time, but without pattern;
• on different programs at each cycle;
• when choosing a specific mode, in each wash.

All work that is planned to be carried out with the condition of partial disassembly must be carried out when the washing machine is disconnected from the water supply and electricity.

Failures not related to device failure

If the PF error code repeats, you should check how correctly the equipment is connected to electricity.

It is advisable that the socket be wired separately to a specially designated 12A circuit breaker, and the wire should be 2.5 mm. Such stringent requirements are explained by the fact that the automatic washing machine consumes high power during operation.

The use of extension cords is not recommended. The cord, plug and socket must be in good working order. The plug is securely inserted into the outlet. If damage is detected, it is necessary to eliminate the defects.

If all the conditions for correct installation of LG are met, it is recommended to turn off the power to the washing machine for 15-30 minutes, and then turn it on again. If the failure on the control board was accidental, operation should be restored.

It is also necessary to check the voltage in the network. If it is lower than the manufacturer recommends, malfunctions may occur.

Problems with the noise filter

The interference filter is a device that is located under the top cover of the LG washing machine. Its task is to dampen electromagnetic waves from the washing machine so as not to interfere with the operation of other devices - TV, computer, etc.

Since the filter is a link in the electrical circuit, if it breaks down or the contacts come loose, the entire washing machine may malfunction. It is even possible to diagnose the filter on your own. To do this, you need to remove the top cover and disconnect the part from the wires.

If the filter has external defects or does not “read” the multimeter, it needs to be replaced or repaired. In the case where a failure is caused by loose, loose contacts, they are fixed.

Damage to the electrical wiring in the washing machine body

If the LG display shows an error code PF on any program, and the machine freezes at any time after starting work, this may indicate a problem in the wiring. Damage can occur as a result of chafing of wires, damage due to vibration during operation, or damage by rodents.

After identifying the damaged area, it is necessary to restore the functionality of the wiring. If the condition of the wires is deplorable, then the entire cable is replaced. For small defects, twist and insulate the area.

The heating element burned out

Often the heating element is to blame for the failure. If during the washing process the machine is knocked out, and after turning it on again, the PF code is issued, this may indicate problems with the heating element.

To diagnose the condition of the heating element, it is necessary to gain access to the part. This is possible by partially disassembling the washing machine and removing the back wall. The heating element is located at the bottom of the tank.

To carry out diagnostics, it is disconnected from the contacts and the screw is unscrewed. After this, the heating element is carefully removed and checked with a multimeter. A faulty heating element cannot be repaired - it is replaced with a new one.

Before installing a new part, it is advisable to use a flashlight to clean the lower part of the tank, where the old heating element was located, from debris.

The control module is broken

An electronic controller is an element that controls the washing machine. If this module fails, the PF error may appear at any stage of the cycle - during washing, spinning or rinsing.

In most situations, the LG control module can be repaired. The technician carries out diagnostics, identifies the damaged area, and solders tracks and contacts and replaces elements. In extremely rare cases, the module becomes in such a state that it requires complete replacement.

To carry out repairs, the board must be disconnected from all contacts and removed. If such work is carried out by a non-professional, then photographs should be taken at all stages in order to subsequently correctly connect the removed part.

Repairing the board requires special tools and electrical knowledge. If you do not have such experience, it is advisable to entrust the work to a professional.

An example of diagnostics and repair is in the video:

How to turn on sound

Most of the Samsung AMS have the option of sound notification about the end of the work process. In some cases, a loud melody can disturb the peace of the family. You can deactivate the option by clicking the “Mute sound” button, if it is provided in this model.

If there is no such key, solve the problem as follows:

• Find the “Spin” and “Option” buttons on the panel.
• Press them at the same time.
• Hold until the display shows an icon with a crossed out speaker.
• Then release the buttons.

If necessary, the sound warning system is activated again by similar actions. Information about the functionality of the washing machine and the ability to turn off and turn on various options is contained in the user manual.

If you cannot remove the melody using the buttons, contact customer service. A qualified technician will remove the dashboard and seal the speaker, this will reduce the volume of sounds from the device.

Models

WW6600R

WW6600R is one of the cheapest models with a maximum load of 7 kg. Thanks to the Bixby feature, the consumer has the ability to control the device remotely. There is a built-in quick wash mode that will complete the entire process in 49 minutes. Thanks to the vortex structure of the Swirl+ drum, the number of revolutions increases. A special AquaProtect sensor is built in, which will prevent water leakage. The Eco Drum function helps eliminate various unpleasant odors that can be caused by dirt or bacteria. In case of severe contamination, the user will see a corresponding message on the electronic display.

Another equally important technology is the steam cleaning system. It ends up at the bottom of the drum where the clothes are. Thanks to this, impurities are cleaned and substances that can cause allergies are removed.

To ensure that detergent is rinsed out more efficiently after washing, the Super Rinse+ mode is provided.

Thanks to this, impurities are cleaned and substances that can cause allergies are removed. To ensure that the detergent is rinsed out more efficiently after washing, the Super Rinse+ mode is provided.

To be calm about the safety of this machine, the manufacturer has built in surge protection and the ability to quickly diagnose. Level A washing quality class, the presence of an inverter quiet motor, which during operation produces 53 dB during washing and 74 dB during spinning. Operating modes include delicate wash, super rinse+, steam, economical Eco, washing synthetics, wool, cotton and many other types of fabric. The volume of water consumed per cycle is 42 liters, depth – 45 cm, weight – 58 kg. The electronic display has built-in LED backlighting. Electricity consumption – 0.91 kW/h, energy efficiency class – A.

WD5500K

WD5500K is a mid-price segment model with a maximum load of 8 kg. Its distinctive feature is its unusual metallic color and narrow shape, which allows this model to be placed in small openings where other cars cannot fit. Another feature is the presence of Air Wash technology. Its purpose is to disinfect clothes and linens using hot air streams, thereby giving them a smell of freshness and disinfecting them from bacteria. The fight against germs and allergens is carried out by a function called Hygiene Steam, which works by delivering steam to the clothes from the bottom compartment of the drum.

The basis of all work is a powerful inverter motor, which saves energy and at the same time operates quite quietly. The difference from the previous model is the presence of such a function as VRT Plus. It significantly reduces noise and vibration levels even when operating at the highest drum speeds. In addition, a special vibration sensor is built in, which balances the entire structure. This washing machine uses a combination of quick wash and dry modes. The whole process takes 59 minutes, after which you will receive clean clothes that are completely ready for ironing. If you just want to dry your clothes, then the load should not exceed 5 kg.

If we talk about characteristics, then the noise level is 56 dB for washing, 62 dB for drying and 75 dB for spinning.

WW6800M

WW6800M is one of the most expensive and efficient washing machines from Samsung. This model has improved characteristics when compared with previous copies. The main feature is the presence of QuickDrive technology, which is aimed at reducing washing time and reducing energy consumption. There is also a built-in AddWash function, which allows you to place clothes in the drum in cases where you forgot to do this in advance. It is worth saying that you can take advantage of this opportunity even after the wash has started. This model has a set of functions for diagnostics and control over the quality of work.

Thanks to the QuickDrive and Super Speed ​​functions, washing time can reach up to 39 minutes. It should be noted that this model has a whole system for cleaning clothes and washing machine components. There are also functions to reduce noise and vibration during operation. The load is 9 kg, energy efficiency and washing quality class is A.

Checking readiness

The readiness of the washing machine for operation is determined by preliminary preparation. Following the recommendations in the instructions for the device, the unit must be plugged in and checked for voltage on the washing machine. This is indicated by the indication on the display. These can be indicators of the “On/Off” button, “Network” and so on.

After turning on the machine, you should load the drum with laundry, not exceeding the norm, and select the required washing mode. To do this, it is recommended to look at the instructions to determine what type of items should be washed, in what mode, and then do so.

Speaking about the readiness of the washing machine for operation, it would not be superfluous to check the hardness of the water in the water supply, which is planned to be used when operating the automatic machine. Depending on the chemical state of the water, the required amount is poured into a special compartment for washing powder. If necessary, housewives usually add special water softeners or bleaches.

What is the Eco Bubble function?

All housewives know that washing clothes with rich foam is much easier than with a solution of washing powder. This feature was adopted by engineers. The new machine has a special compartment (foam generator), in which water, washing powder and air are thoroughly mixed. The foam formed in it enters the tank with the laundry and gently washes it. It penetrates into fibers 40 times faster than any powder solution. This new feature is called “Eco Bubble”. In addition to improving the quality of washing, it also allows you to save a lot on electricity. The fact is that when using foam, the temperature of the water in the tank can be significantly reduced. Why won't this affect the quality of the wash?

Any Samsung model washes clothes efficiently. The Eco Bubble washing machine also has the advantage that when using it, the procedure for rinsing clothes is greatly simplified. After all, it is much easier to remove foam from it than powder.

Prepare things carefully

The factory instructions say nothing about preparing things for loading. But experienced housewives know that the quality of washing and the performance of the machine depend on sorting the laundry. So, it is recommended not to forget about the following “material” rules.

• Linen is sorted into three groups: light-white, dark-black and colored.
• We pay attention to the material. Cotton, synthetics, wool, silk are washed separately from each other and in different programs.
• Don’t ignore the labels on things – the manufacturer indicates on them the maximum temperature and spin cycle for washing.
• Pockets must be checked for forgotten items, coins, keys, and paper. Remember that “lost” items will fall out of things when the drum rotates, damage the tank, or get stuck inside the machine.
• Shake off the dust from the laundry, remove hair or fur.
• We fasten zippers, snaps and buttons.
• We turn down jackets, jackets and bed linen inside out.
• For tough stains, pre-soak and treat with stain remover.
• Inserts made of natural fur, if available, can be unfastened or covered with plastic film.
• Clothes with an abundance of decorative elements (studs, rhinestones, beads, crochet) are placed in a special mesh bag.
• Additional detergents (fragrances, rinse aids, concentrates) are selected for the laundry.

Before washing, you need to check your pockets - forgotten keys or coins will lead to a clogged drain, a jam, or damage to the drum.

Special attention is paid to shoes loaded into the drum. No more than two pairs are washed at a time, and they must be placed in a protective bag, with jeans or an old towel placed next to them. The laces are pulled out, the excess decor is removed.

Caring for the machine

In order for the machine to wash efficiently, you need to monitor it. It is better to do this throughout the entire operation, but an express check immediately before starting the cycle will not hurt. First of all, look:

• Is the machine level?
• is the drum fully loaded (with a full tank, the internal mechanisms of the washing machine wear out more slowly);
• whether the maximum loading weight has been exceeded (overloading is no less dangerous than underloading);
• Do things need high temperature (constant operation of the heating element increases energy consumption and greatly “stresses” the machine, so it is better to wash at 30-40 degrees);

• Is it possible to reduce the spin speed (it is not recommended to constantly accelerate the machine to “maximum speed”, it is better to limit yourself to 400-600 rpm);
• how to turn the programmer (manufacturers advise turning the selector strictly clockwise).

It is forbidden to run more than two high-temperature cycles in a row - the Samsung machine must rest for at least 20-40 minutes.

It is advisable to pay attention to the machine after finishing washing. Wipe the cuff and drum walls dry, wash the dispenser and leave the hatch door open. Be sure to unplug the machine and not use extension cords. Ideally, you should regularly carry out comprehensive cleanings: run an “empty” cycle twice a month, rinse the garbage filter and treat the insides of the unit with an anti-scale and fungus agent.

Interesting:

• Rating of Samsung washing machines
• First launch of the Beko washing machine
• Reviews of Samsung washing machines
• How to turn on the Atlant washing machine?
• Samsung washing machines
• Reviews of Samsung dishwashers

Reader comments

• Share your opinion - leave a comment

Detergents for the first wash

A recently purchased washing machine has most likely been tested before being sold and therefore its drum is contaminated with oil and dirt residues. They must be removed before use. Therefore, the first cycle should always be carried out without any laundry loaded into the drum.

That is, “idle”. This will clean the internal components and parts of the machine and prepare it for further use. You should not immediately pour too much washing powder into the detergent compartment, and you should choose the longest cycle.

Helfer Start HLR0054 is a popular chemical that is well suited for the first wash. It effectively cleans devices from unpleasant odors, fuel oil, grease and other industrial contaminants. It is loaded into the powder compartment and after a complete “idle” cycle. As a result, the washing machine will be cleaned of various deposits and ready for use.

There are special ORO tablets on sale for the first wash in an automatic machine. The first tablet, CLEAN, quickly dissolves dirt on the internal surfaces of the machine, and the second, CALC, is put into the machine after 25-30 washes or after 3 months of use. This is a preventive measure against the formation of corrosion and limescale on the heating element, which is recommended to be done regularly.