Washing machine Margarita 2000 how to drain the water

Ariston margherita 2000 - washing machine operating instructions in Russian: download

Look for the instructions for the Ariston margherita 2000 washing machine, we have saved all Russian instructions in the language you need and you can read them directly on this page or download and print the required page.

In the comments, you can ask your question to the master, or share the solution to your problem with other readers of our portal.

Detailed instructions for an Ariston brand washing machine will help you resolve issues with the technical characteristics of this machine, how much laundry can be loaded into this washing machine, how much and where to pour washing powder, as well as installation and connection, as well as how to use the washing machine control module

Features of operation of Ariston Margarita 2000

Models in this series have a wide range of functions and are distinguished by fairly high quality washing, rinsing and spinning performance, and consume a minimum of electricity and water. They belong to washing class A, because even when the water is heated to 40 degrees, they consume only 0.15 kilowatts of electricity per kilogram of dirty laundry.

This washing machine is equipped with a rather interesting program called “Golden Cashmere”, which allows you to wash only delicate fabrics and avoid the formation of pilling. But the daily wash function assumes a cycle duration of only 30 minutes, and you can load items of any color into the drum.

A quick wash in just 90 minutes allows you to wash moderately soiled items. If desired, you can delay the start of operation of the “ariston margherita 2000” als109x device for the required time. Malfunctions rarely occur in its operation, but they all require attention and, in most cases, the intervention of specialists.

Instructions for using the washing machine Ariston margherita 2000

We have also made a link for you where you can download this manual for a front-facing washing machine to your computer for free.

If you follow the recommendations from this article on using a washing machine, you will certainly increase its service life, and also enjoy washing and using this home assistant!

Video review and repair of the Ariston margherita 2000 washing machine module

Source

Powder cuvette design

The powder cuvette in the Ariston Margherita machine opens outward. It has a semicircular shape and contains four compartments. The compartment on the left is for fabric softeners and fabric softeners. Detergent is placed in the compartment on the right.

The central compartment is needed for pre-washing. Dry and liquid laundry detergent are placed in it. The fourth compartment is for bleach. It is inserted into the pre-wash compartment.

Ariston washing machine does not drain water - what to do

Often housewives and consumers are faced with the fact that the Ariston washing machine does not drain water. This creates certain difficulties during further operation. It’s not just the inability to open the door, get things out and start the drain, but the lack of further spinning and completing the wash cycle. As a result, water stagnates inside, which leads to oxidation of the drum and the appearance of mold. Calling a technician is always expensive, so this article will look at independent troubleshooting methods.

Rules for assembly and disassembly of Ariston Margarita 2000

If you want to fix the problem yourself, you need to understand how to properly disassemble and assemble the Ariston Margarita 2000 washing machine. Malfunctions of this model are largely eliminated by partially or completely disassembling it.

Important! Remember that most problems with such equipment can be prevented by competent maintenance, which, by the way, will not take much of your time. Just follow the rules outlined in the articles below:
Washing machine maintenance.
Removing scale from a washing machine.
Installing a surge protector.

The top cover can be removed quite easily; you just need to unclip the control panel and unscrew a few screws from the back wall. To remove the cover, you need to unscrew the two mounting bolts and simply slide the cover to the side. A screwdriver will help you carefully remove the spring ring that secures the rubber seal directly to the body and the rubber seal on the door. The screws are removed using a Phillips screwdriver. As soon as the new part is replaced, the sealing rubber returns to its place.

In more detail this process looks like this:

The top cover is removed.
The cover and handle are removed.
The screw is removed from the handle and the mechanism is removed.
The detergent distribution drawer opens and is removed by pressing.
Unscrew the two screws of the control panel and the loading hatch.
Potentiometers are removed.
Push-button switches are removed.
The on/off and hatch lock indicators are removed.
The control panel screws are removed.
The counterweight is removed using a socket wrench.
The tank is removed, all the screws holding the counterweight are turned out.
The back cover and drive belt are removed.
The bolt is unscrewed from the pulley, which prevents it from turning.
The pulley is removed using two screwdrivers.
Then we tilt the car forward and support it with something, but we need to make sure that the electrical components of the lock and control panel do not fall out.
We disconnect the electric motor by pulling out the terminal block and disconnecting the ground wire.
The electric motor is lowered and removed through the now missing rear panel.

So, we have looked at the basic rules and sequence of disassembling this model of washing machine. If you follow them, the process of replacing a broken part will not cause any difficulties.

Why doesn't the equipment drain the water?

Causes of problems in Ariston:

Program crash. Perhaps there was a network overvoltage or a power outage, which allowed the Ariston machine to “think” about performing the task at hand, specifically about draining, or to stop working completely. Knocking on the top cover or the presence of heavy objects similarly cause a malfunction, which also stops the drain.
The drain hose is blocked by foreign objects.
Clogged sewer system.
Foreign objects have entered the filter.
Pump or pump failure.
Extension of the hose or placement at an unacceptable level.
Wiring open or shorted.

Some of the problem can be solved yourself, while the machine will remain in working order. The owner of Ariston is lucky if his machine is equipped with the Smart diagnostic function. Using special keys, Wi-Fi and a smartphone, the machine is diagnosed, and after a few seconds a notification is received about the breakdown, the possible cause and how to fix it. This option is factory-installed, but is installed in more modern Ariston models.

Diagnosis and troubleshooting

Program crash

Restart the program. Press start wash cycle and wait. If there is no reaction, turn off the machine and start draining.
Remove heavy objects from the lid and try to restart the drain.
If the problem is not solved, then the problem is not in the program.

Hose

Check the bend radius. Minimum 50, maximum 80 cm. If it is bent or not bent, then the water simply will not reach the drain. The machine will receive a signal to the built-in sensors, and the command will remain unfulfilled. You can fix the problem using a special clamp that comes with the washing machine.
Possible squeezing. This happens if you step on or knock over something heavy. The situation will not only stop the cycle, but also break the rubber. Remove any foreign objects.
Check the connection. The fastenings could come off, and the smart machine decided not to drown the neighbors below.

Sewerage

Open the tap or flush the toilet tank; if the water does not drain, you need to clean the system.
When disconnecting the drain source from the corrugation, the washing machine must be turned off.
Clear the blockage.

Filter

Turn off the power to the washing machine.
Place a towel underneath.
Open the filter protection. It is located at the bottom on the right side (if the car is facing the owner).
Turn the cap to the right and unscrew it.
Wait until the water stops flowing.
Remove the filter and inspect for excess contents: buttons, coins, washing powder.
Rinse the part. The water should not be hot.
Rotate the impeller (located behind the filter); if it moves freely and does not jam, then the pump is in order.

water pump

After draining the water and removing the filter, start the spin cycle.
If the impeller remains motionless, there may be a problem with the pump or pump.
When the pump makes an unusual noise, water has most likely leaked into it. In such cases it must be replaced.
To diagnose, you need to remove the lid of the washing machine.
You can fix the problem yourself if, after a visual inspection, minor damage is visible.
Did the examination yield no results? Then contact a specialist who carries out highly qualified repairs of Ariston machines.

Wiring

Remove the top cover and inspect the wires.
Perhaps the previous spin helped to disconnect the block of wires from the board. Return the block to its original position and restart Ariston.
Check for moisture or broken contacts

Installation

Before you start using the washing machine, you need to take care of its installation. After the unit has been unpacked, it must be carefully inspected for possible damage. Don't be so sure that everything is fine with the machine. If you find something, call the store immediately, and don’t even think about turning on the machine.

If everything is in order, then you need to remove the shipping bolts that held the moving parts. They must be preserved; they may be needed, for example, when moving. The holes for the bolts can be closed with special plugs.

The next stage is leveling the surface on which the machine will stand. Usually the position of the machine itself is leveled by rotating the front legs, but this may not be enough. Read more about how to level the machine in the article on our website.

Having prepared the installation site, proceed to connecting the hoses. Using your hands, screw the inlet hose onto the ¾ diameter water pipe or its outlet. Then screw the bent end of the hose to the tube coming out of the back of the machine, coming from the fill valve.

Important! Be careful not to lose the rubber seal that is located just after the fitting washer.

Connect the drain hose to the sewer or outlet in the sink siphon, but only so that its end is not in the water. The upper drain point should be fixed at a height of 60-100 cm using a clamp on the back wall of the machine. When connecting, it may be necessary to increase the length of the hose; this can be done, but the total length should not exceed 150 cm.

Now all that remains is to connect the machine to electricity, but before doing this:

check that the wiring matches the maximum load of the machine;
whether the voltage in the network corresponds to the permissible standard;
whether the plug from the machine cord fits your socket, otherwise change the socket, but do not use an adapter;
Is there any grounding in the electrical network?

Powder cuvette

In the Ariston Margarita 2000 washing machine, the powder cuvette has a semicircular shape and opens outward. The cuvette is divided into 4 compartments. The leftmost compartment is designed for various fabric softeners and fabric softeners. The elongated compartment on the right is the main one; liquid or bulk detergent is placed in it.

The compartment located in the center is intended for pre-washing. You can put either liquid or dry laundry detergent in it. As for the fourth compartment, it is inserted into the pre-wash compartment in case you need to add bleach. At the same time, be careful and do not pour too much product, there is a special mark for this.

For your information! Prewash and bleaching are mutually exclusive and cannot be used at the same time.

Ariston washing machine does not drain water, what should I do?

Why doesn't the equipment drain the water?

Causes of problems in Ariston:

Program crash. Perhaps there was a network overvoltage or a power outage, which allowed the Ariston machine to “think” about performing the task at hand, specifically about draining, or to stop working completely. Knocking on the top cover or the presence of heavy objects similarly cause a malfunction, which also stops the drain.
The drain hose is blocked by foreign objects.
Clogged sewer system.
Foreign objects have entered the filter.
Pump or pump failure.
Extension of the hose or placement at an unacceptable level.
Wiring open or shorted.

What to do if Smart diagnostics is not provided by the manufacturer? Then all that remains is to conduct an independent inspection of the equipment, finding out why the drain is not working. Some Ariston models equipped with an electronic display may display an error code, which will simplify the search, but this function does not work on mechanics.

Diagnosis and troubleshooting

Program crash

Restart the program. Press start wash cycle and wait. If there is no reaction, turn off the machine and start draining.
Remove heavy objects from the lid and try to restart the drain.
If the problem is not solved, then the problem is not in the program.

Hose

Check the bend radius. Minimum 50, maximum 80 cm. If it is bent or not bent, then the water simply will not reach the drain. The machine will receive a signal to the built-in sensors, and the command will remain unfulfilled. You can fix the problem using a special clamp that comes with the washing machine.
Possible squeezing. This happens if you step on or knock over something heavy. The situation will not only stop the cycle, but also break the rubber. Remove any foreign objects.
Check the connection. The fastenings could come off, and the smart machine decided not to drown the neighbors below.

Sewerage

Open the tap or flush the toilet tank; if the water does not drain, you need to clean the system.
When disconnecting the drain source from the corrugation, the washing machine must be turned off.
Clear the blockage.

Filter

Turn off the power to the washing machine.
Place a towel underneath.
Open the filter protection. It is located at the bottom on the right side (if the car is facing the owner).
Turn the cap to the right and unscrew it.
Wait until the water stops flowing.
Remove the filter and inspect for excess contents: buttons, coins, washing powder.
Rinse the part. The water should not be hot.
Rotate the impeller (located behind the filter); if it moves freely and does not jam, then the pump is in order.

>>> Ariston margherita al 1256 ctx instructions – PDF

Washing machine kaiser w4t10 instructions for use >>> Washing machine kaiser w4t10 instructions for use Washing machine kaiser w4t10 instructions for use E11 Device malfunction

More details

Error codes for Electrolux washing machines Electrolux (Electrolux) Error codes Malfunctions of Electrolux washing machines (Electrolux) Decoding the code for Electrolux washing machines (Electrolux) This column

More details

Zanussi aquacycle 1000 instructions read >>> Zanussi aquacycle 1000 instructions read Zanussi aquacycle 1000 instructions read D 2.5 kg 50 57 0.90 85-95 Delicate fabrics For all delicate materials,

More details

Note. Error codes F01-F11 are valid for SM series “2000” (ARISTON and INDESIT), F01-F12 for SM INDESIT series “Evolution”, F01-F15 for SM ARISTON and INDESIT with drying, and F01-F05, F07-F12, F17 for SM

More details

Indesit 421w how to use >>> Indesit 421w how to use Indesit 421w how to use On the page you can download instructions for the Indesit washing machine for free. Large powder tray.

More details

Instructions for the luxor washing machine >>> Instructions for the luxor washing machine Instructions for the luxor washing machine Before loading the laundry into the drum of the washing machine, check it for the presence of

More details

Operating instructions for the washing machine Hansa 900 comfort >>> Operating instructions for the washing machine Hansa 900 comfort Operating instructions for the washing machine Hansa 900 comfort Then the direction

More details

Indesit 2296xw program table >>> Indesit 2296xw program table Indesit 2296xw program table I wash almost everything except wool and outright synthetics on program 4, 40 degrees, 500 rpm.

More details

Instructions for the washing machine zanussi t 834 v in Russian >>> Instructions for the washing machine zanussi t 834 v in Russian Instructions for the washing machine zanussi t 834 v in Russian We wish you a pleasant use of your

More details

Washing Machine Eyelid Wme 53500 Instructions for Use >>> Washing Machine Eyelid Wme 53500 Instructions for Use Washing Machine Eyelid Wme 53500 Instructions for Use Just probably such quality

More details

Washing Machine Eyelid Wme 53500 Instructions for Use >>> Washing Machine Eyelid Wme 53500 Instructions for Use Washing Machine Eyelid Wme 53500 Instructions for Use Just probably such quality

More details

Washing Machine Eyelid Wme 53500 Instructions for Use >>> Washing Machine Eyelid Wme 53500 Instructions for Use Washing Machine Eyelid Wme 53500 Instructions for Use Just probably such quality

More details

For the washing machine siemens advantiq x12 45 manual >>> For the washing machine siemens advantiq x12 45 manual For the washing machine siemens advantiq x12 45 manual Mezhdunarodnaya, 13 Moscow, Vostryakovsky

More details

Bosch wfm 3710 washing machine instructions >>> Bosch wfm 3710 washing machine instructions Bosch wfm 3710 washing machine instructions All manuals are posted on our server. In the comments you can

More details

Error codes, tests Compliance with the Euro standard, high-quality components, strict testing, automated assembly - in Belarus. It is these characteristics that are inherent in Atlant. To determine the malfunction

More details

Instructions in Russian miele novotronic w914 >>> Instructions in Russian miele novotronic w914 Instructions in Russian miele novotronic w914 Maybe someone has a description and diagram for the 914? Washing machines,

More details

REPAIR OF BOSCH WASHING MACHINES (SERVICE MANUAL) Service test and error codes of Bosch washing machines series 5-6-7 Introduction This manual is intended to assist repair technicians in identification

More details

Washing machine miele w1 instructions >>> Washing machine miele w1 instructions Washing machine miele w1 instructions Company specialists claim that such drums were developed on the basis of bees

More details

Instructions for whirlpool awe 60110 >>> Instructions for whirlpool awe 60110 Instructions for whirlpool awe 60110 Follow the manufacturer's instructions for dosing. No instructions for the hare Characteristics of Whirlpool AWE

More details

Bauknecht Washing Machine Operating Instructions >>> Bauknecht Washing Machine Operating Instructions Bauknecht Washing Machine Operating Instructions The shape of the candles is streamlined, so that

More details

Request result: Hotpoint washing machine Ariston Aqualtis instructions... (Ariston Hotpoint). Ariston Hotpoint CAWD 129 manual.pdf. washing machine Apr 15, 2014 Review Hotpoint Ariston AQSL 05

More details

Bosch wfb 2070 instructions for free >>> Bosch wfb 2070 instructions for free Bosch wfb 2070 instructions for free Since this is a rather large household item, and it takes up a lot of space. State Farm,

More details

Repairing washing machines questions and answers Ardo T 80 x do it yourself >>> Repair washing machines questions and answers Ardo T 80 X do it yourself Repairing washing machines questions and answers Ardo T 80 X do it yourself

More details

Operating instructions for the washing machine Siltal Sl 040x >>> Operating instructions for the washing machine Siltal Sl 040x Operating instructions for the washing machine Siltal Sl 040x Why did this happen?

More details

Whirlpool awt 5108 4 table of programs >>> Whirlpool awt 5108 4 table of programs Whirlpool awt 5108 4 table of programs Member Messages: 274 drey wrote: usually they stop answering after such a question! Participant

More details

Forum Repair articles Call a technician Troubleshooting BEKO washing machines An error has appeared (errors can be observed at the beginning of the “service test” or during operation) We begin the determination algorithm

More details

Operating instructions for the washing machine wave m >>> Operating instructions for the washing machine wave m Operating instructions for the washing machine wave m Washing machine Volna 2M. If this is

More details

Washing machine hansa optima 800 instructions for usepdf-1 >>> Washing machine hansa optima 800 instructions for usepdf-1 Washing machine hansa optima 800 instructions for usepdf-1 At the same time

More details

Washing machine hansa optima 800 instructions for usepdf-1 >>> Washing machine hansa optima 800 instructions for usepdf-1 Washing machine hansa optima 800 instructions for usepdf-1 At the same time

More details

Washing machine siltal sl348x instructions >>> Washing machine siltal sl348x instructions Washing machine siltal sl348x instructions Maybe someone had this and at least tell me the basics how

More details

Washing machine siltal sl348x instructions >>> Washing machine siltal sl348x instructions Washing machine siltal sl348x instructions Maybe someone had this and at least tell me the basics how

More details

WASHING MACHINE WM-4515 USER MANUAL PRECAUTIONS Connect the appliance only to a grounded outlet. Do not touch the squeegee until it has completely stopped. Be especially careful

More details

Washing machine siemens x10 16 instructions >>> Washing machine siemens x10 16 instructions Washing machine siemens x10 16 instructions Instructions for use in Russian, offered by the manufacturer,

More details

for home Only a qualified specialist is allowed to install the device on one family. All work operations must be carried out consistently in full and controlled. Application area

The washing machine does not drain or spin

The spin mode starts if the water drainage works correctly. If, after solving the drainage problems, the spin still does not start, then there are likely more complex problems.

Causes and solutions

Board malfunction. Usually, error F18 is displayed on the display, which means this breakdown. Unfortunately, you won’t be able to fix the problem yourself, as you will need to reflash the system.
The drain has failed . Fix the problem and restart the program.
Press failure . Remove the top and inspect the load. Replace if necessary.
Failure of the tachogenerator (Hall sensor) . Check the fastening; if the part is loose, it needs to be tightened. Rotate the drum manually and substitute the voltage measurement (no more than 0.2). Is the data positive? Then the probability of a defect is contamination. Clean the sensor and reinstall it according to the instructions. In case of mechanical damage, the part needs to be replaced.
The bearing broke . It is easy to detect a breakdown: when the drum rotates, a loud knock or hum is heard. In this case, the bearing must be replaced.
Engine failure. The Ariston machine only has a commutator motor; most likely, the brushes are worn out or the belt is broken. Wear of parts is visible visually. You can make the replacement yourself.
Control module . Water got in, excessive vibration, the car suffered a strong blow, this leads to a decrease in the functionality of the Ariston “heart”. In such cases, the module is visually inspected for moisture and disconnected contacts. If necessary, it can be removed and cleaned. If, after manipulations, the program does not start, or the indicators begin to blink, it is recommended to contact a washing machine repair shop.

After all of the above, it became clear what to do if the Hotpoint Ariston washing machine does not drain water or spin, and how to fix any damage yourself.

Important. If you are not sure that eliminating defects on your own will not lead to significant damage, it is better to contact a specialist.

The positive aspects of DIY repairs include saving money. But it takes a lot of time to diagnose, disassemble and fix problems.

Calling a technician and repairing it can be expensive, however, it will save time and provide professional and quick assistance to the washing machine. In addition, a qualified specialist will quickly determine whether the equipment can be repaired or whether it will be easier to purchase a new assistant.

Source

Step-by-step testing of Ariston machine malfunctions

It is recommended to repair the Ariston Margarita 2000 washing machine yourself only if you have a special service test. It allows you to easily detect any defect in the operation of the device and make repairs faster and easier. Next, we will learn how to run this test and check the operation of the machine.

Working with a service test

In order for the service test to start working, you will need the above-mentioned SAT diagnostic key. This tool has the following code - 95669. It allows you to launch an automatic testing program for the Margarita 2000 model. Then we connect the device to the connector and wait until the corresponding indicator lights up. First, the key will exchange information with the electronic controller for some time.

The testing program is launched as follows:

We check the connection of the machine to the water supply and sewerage system.
We inspect the tank for the presence of residual water in it; if there is any, then it must be removed immediately.
Close the hatch door tightly.
Set the selector knob to its original position.
Press the “AUTO TEST” button on the key and hold it.
As soon as the automatic testing starts, you will immediately hear a beep.

Important! During testing, the selector knob will automatically rotate, and at the same time, codes of the corresponding nature will be displayed on the panel. If the test detects an error, the indicator will stop constantly glowing and the light will start flashing, that is, indicating a fault code.

The number of flashes indicates the error code. Please note that when testing, the water inside the device will heat up to 30 degrees, so you need to set a water heating limit, turn off the spin functions and set any drying time.

Step-by-step execution of service testing

The process of diagnosing the Ariston Margarita 2000 washing machine can be roughly divided into several stages. Malfunctions and possible breakdowns are eliminated in the following sequence:

The fill valve for washing is selected and started in the main mode for 10 seconds.
Then the pre-wash starts for the same time in the same mode.
The hot water supply valve opens for 10 seconds.
The fill valves for the main and preliminary washes are turned on synchronously. Water will flow into the tank until the sensor signals that it is full.
The drum rotates first clockwise and then in the opposite direction.
The heating element turns on and the water warms up to 30 degrees.
The handle moves in the normal direction of rotation, and then stops in the 9th position.
The drain pump starts working. Moreover, it will function until the sensor reports that the tank is empty.
If the device is equipped with a drying mode, its fan will start working at this stage, and then the heating element will turn on and the air inside the tank will begin to warm up.
The selector knob moves to the reset position.
The program ends.

Important! If the malfunction of the Ariston Margarita 2000 washing machine was eliminated before the start of the test, then the service analysis simply will not start. To restart the machine in this case, you will need to turn it on for 10 seconds, disconnect the service key and start it again.