Tips and ways to remove resin from pine and other coniferous trees from clothes at home

You can often see resin on the trunks of coniferous trees, which can easily get dirty while walking.
Sticky and viscous, it can seriously stain clothes. Resin is a complex contaminant that cannot be dealt with quickly. It will be even more difficult to remove dried stains.

How and with what to remove pine resin from clothes at home, how to remove stains? You will find answers to questions in the article.

Features of spots

Wood resin is a product of organic origin. The sap secreted by trees has a thick consistency and complex composition .

Wood tar is viscous and oily, and has a brown color. Resin is formed during the hardening process of pine sap.

Fresh and hardened resin from coniferous trees actively reacts to heating and freezing. This circumstance can be taken advantage of, especially in cases where it was not possible to remove the resinous drop before it set.

Freezing makes the resin brittle . In this state, it crumbles easily and can be removed from the material quite easily.

Removal methods using heating are more complex in technology and are not suitable for processing synthetic fabrics and other materials that do not tolerate heat.

The item needs to be prepared for heat treatment:

1. If the stained clothing has a lining, it is paired so that the fabric with the stain is in one layer.
2. Before you handle the iron, you need to apply napkins with good absorbency on both sides of the stained area.
3. As the resin warms up and is absorbed, they will need to be replaced with new ones.

In addition to pine, other trees also release resin - larch, spruce, thuja, etc.

Carbonated drink

Coca-Cola, Sprite, Pepsi or any lemonade with gas can not only clean the toilet and sink of stains, but also remove the sap of the coniferous spruce.

How to remove resin from clothes:

1. Pour the carbonated drink into a small bowl large enough to fit only the dirty area. There is no need to soak the entire product.
2. After 20 minutes, carefully remove the main stain with a knife and rub the stain.
3. Then wash the item as usual. Don't forget about the temperature and wash cycle based on the type of material.

The traces of pine sap with carbonated drinks are not always removed the first time. The procedure can be repeated.

How to clean fresh?

Most of the resin that gets on clothes has a viscous, thick consistency. In this form, you can try to remove it with a napkin. After removing the top layer, a mark will remain on the fabric, which will have to be removed separately.

When working with liquid resin, it is necessary to ensure that it does not spread over an even larger area of ​​the material. To do this, you can moisten the cloth around the stain with plain water.

remove the resinous composition that hardens in a voluminous drop and dries out mechanically using a knife , spoon or other object. Such actions must be carried out very carefully to avoid tissue damage.

To remove and dissolve the remnants of such a substance, you will need to use drugs that are active against organic resins. They are even easier to remove than synthetic compounds, such as epoxy.

Refined gasoline

Such contaminants are wiped off with gasoline. Such a product must be cleaned; if you use the one used for refueling cars, nothing will come of it, and a new stain will also form.

How to remove resin from pine:

1. Take a cotton swab so as not to touch the clean area of ​​the material and not damage its structure, and apply purified gasoline to the problem area.
2. Wait a while. Monitor the process; when the substance adhering to the material begins to melt, remove it with a napkin.

Then you need to wash the product from gasoline. Even cleaned it leaves an unpleasant odor.

How to withdraw using improvised means?

Traditional recipes are proven methods for removing traces of tree resin, which make it possible to deal with stains at home, without purchasing special products.

Alcohol

Rubbing alcohol purchased from a pharmacy can be used to remove pine tar from clothing items.

This method is suitable for clothes made of dense materials - linen, cotton, denim.

The stained area is treated with a sponge soaked in alcohol. Rub the area of ​​contamination and leave the sponge on top for a quarter of an hour. The remaining pine resin is wiped off with a napkin, and the clothes are washed.

Kerosene, gasoline

Kerosene, like gasoline, can be used to remove pine sap stains. The stain must first be treated with kerosene, then with ammonia.

It is necessary to scrub until a good effect is achieved. If you leave a stain on the fabric, after a while it will be very difficult to remove the residue.

Only purified gasoline is used as a stain remover, which can be purchased in the hardware department of the supermarket.

Turpentine, ammonia and starch

An effective product for removing pine resin from clothes is prepared based on three components:

• 5 drops of turpentine;
• 5 drops of ammonia;
• 1 tsp starch.

All ingredients are mixed in a separate container and generously applied to the resin stain. The composition is left, allowing it to dry. After this, treatment is carried out with a brush. This allows you to remove the starch composition along with the contamination.

White Spirit

In order to scrub jackets and tracksuits made of synthetic fabric, you can use undiluted white spirit.

To do this, a swab or sponge is generously moistened in a solvent and applied, rubbing, to the area with the stain . In this form, it is better to leave the product on the product for half an hour, preventing the tampon from drying out.

After 30 minutes, rub off the stain. The item is washed in the usual way.

How to remove with vegetable oil?

Vegetable oil is an option that can be used to remove tar from a leather surface without any problems. In other cases, the effect of using oil leads to the fact that instead of a resin stain, you have to deal with a grease stain.

In this case, you can complete the cleaning using dishwashing detergent or stain remover .

But for a leather jacket this solution is simple and convenient. The sponge is soaked in oil and the area is treated with rubbing movements. This method allows you to deal with a fresh stain in a matter of minutes, but with old stains it will take time.

You can soak a sponge or napkin with vegetable oil and press it onto the stained area. In this state, you need to leave the jacket for an hour, then rub it, and wipe off the greasy stain with a wet napkin.

White Spirit

If you cannot remove resin from clothes with medical alcohol, use more aggressive substances. For example, white spirit will cope well with this task.

How to remove resin:

1. First you need to get rid of large pieces. Scrape them off your clothes with a blade.
2. Then coat the stains with white spirit solvent. Treat the problem area with the product from the front and back sides. It is necessary to thoroughly saturate the contamination with solvent.
3. White spirit dissolves it. When it is completely dry, all that remains is to wash off the remaining product and wash the item.

White spirit can be replaced with turpentine. The algorithm of actions is the same.

How to remove with special compounds?

It is advisable to remove the resin from clothing before it sets. After mechanical treatment, they move on to chemical treatment, using household chemicals.

Beckmann stain remover

The manufacturer of the Beckmann series of stain removers has a product in its list of products that will help with complex stains. It is able to remove stains from waxes and resins.

The use of the Expert series stain remover is very simple - apply the product to the area and leave it to work . After the reaction has passed, the resin mark is easily cleaned and removed with napkins and a brush.

The price of a small bottle is around 200 rubles. Reviews can be found here, here and here.

"Cinderella" Anti-stain

Using a stain remover allows you to remove various types of stains. The product can be used on fresh stains and is less effective on old stains. Apply the product for 15-30 minutes.

Price - from 40 rubles. Read reviews here and here.

Vanish OXI Action

Almost any stain remover can be used as a solvent. It is more convenient to use - liquid form, for example, Vanish .

The product is applied to the stained area and left for a couple of minutes. If the gel drips, you can soak the sponge well with it and apply it to the stain. After the resin has become viscous, it is cleaned off with a washcloth and hands are washed.

Price – from 170 rubles per bottle. Reviews can be read here and here.

Antipyatin

Antipyatin is a concentrated bleach for white clothes, it contains active oxygen, which can even help remove pine resin. The powder is diluted with water to a paste and applied to the stain.

Within a few minutes, the composition should take effect and the resin will begin to lag. The stain must be rubbed and the item must be washed.

The cost of a pack is around 70 rubles. You will find reviews here and here.

Stain removers

Can bleaches and stain removers be used?

The use of such means of industrial production is permitted. The only thing you should adhere to is to choose them correctly, and not to use them on delicate or fading materials.

How to wipe off the resin?

Effective stain removers such as Vanish and Dr. Beckmann EXPERT, Whiteness and other bleaches.

How to remove pine resin from clothes:

1. Treat the stain well with stain remover.
2. Leave it on for a while, but don't wait for it to dry.
3. Carefully remove large pieces of amorphous material.
4. Wash the item as usual.

Now, you know how to remove such stains and how to properly use stain removers in this situation.

Prohibitions on cleaning

If you notice an area stained with resin on your clothing, you should try to avoid a number of common mistakes:

1. You should not try to wipe off the resin with your hands - this will only smear the sticky mass on the fabric even more and stain your hands.
2. Simply putting a resin-stained item in the washing machine is not an option. Regular washing will not help remove the stain completely, without additional treatment, and this approach can lead to staining of other things.
3. Do not leave solvent or other cleaning agent on the fabric for longer than recommended. This can lead to damage to things and fading of colors.

What can be done in the first minutes after contamination?

Very often, resin stains can appear during walks in nature. It is especially unpleasant if you have nothing to change into, and rinsing in ice water without powder and other means will not bring any results. One of the most hygienic and practical first steps is to treat with alcohol or vodka. To do this, you will need a brush or cotton swab (if available). A stationery or regular knife will also help to remove the top layer of resin. Denim items can be moistened with gasoline; this is unlikely to ruin the dense, coarse fabric.

If the clothes can be changed, you can moisten the stain with vegetable oils. Table salt sprinkled on top will help remove softened dirt particles.

By taking such measures, you can continue your vacation, and upon your return, it will be easier to wash your clothes. In addition, using the methods listed above, you can also cleanse the skin of your hands.

Type of fabric: what does it affect?

When starting to remove stains, it is necessary to take into account the composition of the fabric. When solving the problem of removing adhesive substances, it is important not to damage the item of clothing itself.

How to get rid of resin based on fabric type

Just throwing the item in the washing machine is not an option. This will not help wash it completely. In order not to spoil it, study the inside label and check the composition of the material.

Resin can be easily removed from natural or artificial leather with vegetable oil. Dampen a small piece of cotton wool and carefully peel it off. Then wipe with a cloth soaked in a mild soap solution.

To remove resin from fur, use butter, sunflower or olive oil. Soak a cotton pad and apply for 40 minutes. Wash off any leftovers.

Recommendations

When starting to clean things from resin stains, you need to consider these useful tips:

1. Work with solvents should be carried out with rubber gloves.
2. It is important to consider the type of material and how dry the stain is.
3. It is not advisable to use strong chemical solvents to remove stains from clothes, as this increases the risk of discoloration of the fabric and damage to the material.

Find useful tips and tricks on how to remove resin from clothes here.

Find useful tips and tricks on how to remove resin from clothes here.

Boiling water

You can remove pine resin from clothes using regular boiling water. The method is effective in case of contamination on cotton items and items that do not lend themselves to shrinkage. Can be used to clean resin from jeans.

Place the clothes in the freezer for several hours. It needs to harden; if you immediately put it in boiling water, the tar will melt and spread even more over the fabric.

Then take things out of the refrigerator and start getting rid of the stain. Place only the stained area in boiling water, or pour boiling water over the sink.

Do not keep in water for too long, 5 seconds is enough for everything to soften and easily come off the fabric.

Wash the remains with hydrogen peroxide and wash in an automatic washing machine.

Coca Cola

Coca-Cola contains phosphoric acid, which will help clean the product in the shortest possible time.

Method 1

Moisten the damaged area generously and wait 2-3 hours. You can soak the item completely. When the resin gets wet, rub the stain with a brush and rinse.

Method 2

This method is more gentle. Wash off the dirt with a cotton swab soaked in Coca-Cola and leave for 20-30 minutes. Rinse and wash.

Instead of cola, you can take Fanta, Sprite. To remove traces of resin from light-colored fabrics, you need to use colorless sparkling water.

Attention! This method is not suitable for cleaning white items. They may lose their whiteness.

Alcohol

Alcohol and liquids containing it are good helpers in removing tar. We offer two methods to choose from:

1. Pour a small amount of alcohol directly onto the damaged area and leave for 20-30 minutes. Rub with laundry soap and wash according to the requirements of the material. If the contamination is old, first apply oil to the damaged area.
2. Pour an alcohol-based solvent onto the problem area and wait 20 minutes. Moisten a cotton pad with the same solution and wipe off the stain.

Attention! Do not use as a cleaner on brightly colored items or delicate fabrics: discoloration will occur.

Solvents

Using aggressive solvents is effective, but quite risky: clothes can be completely ruined. The methods are as follows:

1. Acetone. Wet the napkin and wipe with light movements, moving from the edges to the center. Acetone may not work immediately to dissolve the stain. If the mark does not come off the material, repeat the procedure after a few hours.
2. Wood resin can be wiped off with a benzine solution. It is necessary to mix it with baby soap in equal proportions so as not to spoil the clothes. Motor gasoline is not suitable for this purpose; special, purified gasoline is required. Cover the resin crust with the resulting mixture and leave for an hour. Wash thoroughly.
3. Another effective way to clean soiled clothes is turpentine. Moisten a cotton swab and wipe the contaminated area, wait half an hour. Turpentine will weaken the hardness of the resin. Moisten another swab with alcohol. Repeat the process until the stain disappears.

Attention! All substances have a pronounced odor. Processing should be carried out in a well-ventilated area.

After using any of these methods, wash the item with conditioner.

Mechanical method

The first step to purify resin is mechanical processing. It is necessary to carefully remove the frozen crust with a sharp object. You can take a knife, wooden spatulas, a razor blade, a spoon. Do not stretch the fabric; only clean the top layer of the product.

Attention! Silk and thin knitwear are easily damaged, so the mechanical method is undesirable.

Preparation

To successfully remove resin from clothing, several preparatory steps must be taken:

1. Remove dust and dirt from the surface of the product to be cleaned;
2. turn a thing inside out;
3. carefully rip open and separate the lining, if any;
4. treat only the contaminated area of ​​the fabric;
5. to prevent the stain from spreading, moisten the area around it and sprinkle with starch;
6. place a piece of plywood, wood or plastic under the surface to be treated;
7. wear protective gloves.

Aggressive substances should be tested on an inconspicuous area of ​​clothing. If the fiber structure remains unchanged, continue the procedure.

Oil + dishwashing liquid

Fresh resin that has not had time to dry is the easiest to clean. The detergent has degreasing properties, so it is used to remove oil stains. You can wash clothes using the following method:

1. Treat the damaged area with oil. Wait 30 minutes.
2. Pour in dish soap.
3. Leave to soak for 30 minutes.
4. Wash everything off and rinse the product.

Advice! To remove resin from skin, wool or fur, just wait 5 minutes. Then remove the remains with a napkin.