The household appliances market offers a huge selection of washing machines. And often buyers choose this technique based on a certain list of modes. Not only the modes themselves are important, but also the ease of their selection, the clarity of the icons, and the ease of launching the program.
Usually we remember what the main modes mean, but when we have to select a new wash cycle that has not been used before, it is not clear what these functions mean and how to use them.
In this article we will look at the main washing modes of a Samsung machine, as well as descriptions and designations of icons on the display panel.
Delay start function, Washing clothes using the cycle switch
Page 25
- Image
- Text
laundry _25
02 WASHING LINEN
“Delay start” function
You can program your washing machine to automatically finish washing later by selecting a delay time of 3 to 19 hours (in 1 hour increments). The time shown on the display indicates the end time of the wash. 1.
Manually or automatically set the washing machine program to
according to the type of fabric of the laundry intended for washing.
2.
Press the “Delay Start” button several times until the time is set
delays.
3.
Press the Start/Pause button. The “Delay Start” indicator will light up and the clock
will begin counting down to the specified time.
4.
4. To cancel the Delay Start function, press the
On
, then press the On button again.
turn on the washing machine.
Washing clothes using the cycle switch
Thanks to Samsung's automatic wash control system “Fuzzy Control”, washing is very easy. When you select a washing program, the machine automatically sets the correct temperature, time and washing speed, which you can also change at your discretion. 1.
Open the water tap.
2.
Click the
On
.
3.
Open the door.
4.
Load the items one by one, placing them loosely in the machine drum and avoiding
overload.
5.
Close the door.
6.
Load detergent, fabric softener and
pre-wash detergent (if required).
The pre-wash mode is only available when the Cotton, Synthetics, Jeans, Sports, Kids and Daily programs are selected. Pre-washing is only necessary if the laundry is very dirty.
7.
Use
the cycle selector
to select the required cycle according to
with fabric type: “Cotton”, “Synthetics”, “Jeans”, “Sports”, “Wool”, “Hand wash”, “Children’s”, “Daily”, “Quick 29'”. The corresponding indicators on the control panel will light up.
8.
Now, using the corresponding buttons, you can select the washing temperature,
number of rinses, number of spins and delay time.
9.
Press the
Start/Pause
and the wash will begin. The wash indicator will light up and
The display will show the remaining cycle time.
Pause function You can add or remove laundry within 5 minutes after the wash starts. 1.
To unlock the door, press the
Start/Pause
.
The door cannot be opened if the water is too HOT or the water level is too HIGH.
2.
Once the door has been closed, press the
Start/Pause
to
continue washing.
When the wash cycle is completed: After completing the entire wash cycle, the washing machine turns off automatically. 1.
Open the door.
2.
Remove the laundry.
WF8592FF-02610L-04_EN.indd 25
2011-5-2 10:44:51
Washing machine cleaning and maintenance
Page 25
- Image
- Text
washing machine cleaning and maintenance _25
03 CLEANING AND MAINTENANCE
Cleaning and Maintenance
washing machine
Keeping your washing machine clean improves its performance, avoids minor repairs, and extends its life.
EMERGENCY DRAIN WATER FROM THE WASHING MACHINE
1.
Unplug the washing machine from the outlet
power supply
2.
Open the filter cover using a coin or
key
3.
Pull the emergency drain tube forward to
disconnect it from the guide hook.
4.
Remove the plug covering the tube opening
emergency drain.
5.
Let the water drain into the basin.
6.
Reinstall the plug on the emergency tube.
drain and then attach the emergency drain tube to the guide hook.
7.
Replace the filter cover.
CLEANING THE EXTERNAL SURFACE OF THE WASHING MACHINE
1.
Wipe the surfaces of the washing machine, including the control panel, with a soft
cloth using non-abrasive household cleaners.
2.
Wipe the surface dry with a soft cloth.
3.
Avoid getting water on the surface of the washing machine.
Filter cover
Emergency tube
plum
Emergency drain pipe plug
WF8592FE-02613C_EN.indd 25
2008-11-17 ¿AAb 11:22:56
Washing clothes, Instructions for washing clothes
Page 26
- Image
- Text
26_
laundry
Setting the washing mode manually
You can manually set washing modes without using the cycle selector. 1.
Open the water tap.
2.
Click the
On
.
on the washing machine. 3.
Open the door.
4.
Load the items one by one, placing them loosely in the machine drum and avoiding
overload.
5.
Close the door.
6.
Add detergent and, if necessary, fabric softener or
pre-wash detergent into the appropriate compartments.
7.
Press the
Temperature
to select the wash water temperature (cold,
30°C, 40°C, 60°C, 95°C).
8.
Press the
Rinse
to select the number of rinses required.
A maximum of five rinse cycles are available. The washing time will be increased accordingly.
9.
Press the
Spin
to select the spin speed.
By selecting the rinse delay function, wet laundry can be removed from the washing machine. ( : no spin, all indicators off: rinse delay).
10.
Press the
Delay Start
several times to switch between available
options for delayed washing (from 3 to 19 hours in one-hour increments). The displayed time indicates the end time of the wash.
11.
Press the
Start/Pause
to start the wash cycle.
WASHING INSTRUCTIONS
Follow these simple instructions for the cleanest laundry and best wash results.
Before washing, always check the fabric care instructions according to the symbols on the label.
Sort and wash laundry according to the following criteria: •
Care label: Sort laundry into cotton blends
fabrics, synthetics, silk, wool and viscose.
•
Color: Separate colored items from white items.
Wash new colored items separately. •
Size: loading items of different sizes in one cycle will provide more
effective washing.
•
Sensitivity: Wash delicate fabrics separately using the cycle
“Delicate” washes for new wool products, curtains and silk products. See laundry labels for symbols or fabric care information in the appendix.
Checking pockets Empty all pockets before each wash. Small, hard or sharp objects such as coins, knives, pins and paper clips can damage your washing machine. Do not wash clothes with large buckles, buttons or other metal objects. Metal elements on clothing can damage clothing and the tank. Before washing clothes with buttons and embroidery, turn them inside out. If the zippers of trousers and jackets are open during washing, they can damage the drum, rubber seal, door glass, and other clothing. Before washing, zippers must be closed and secured with a drawstring. Clothes with long ties may become entangled with other items of clothing, causing damage. Make sure the ties are secure before washing.
Laundry
WF8592FF-02610L-04_EN.indd 26
2011-5-2 10:44:51
Test mode
While operating a Samsung washing machine, you may encounter a situation where you have doubts about the operation of the device or suspect a breakdown.
For these purposes, there is a test mode provided by the developer. It starts the machine's self-diagnosis process.
The principle of operation and launch of the mode is built on similar principles in all models, but with nuances depending on the specific version of the device.
Launch
Before starting, you must make sure that all communications are connected. Starting is carried out in Eco Bubble machines by pressing a combination of buttons:
- "Spin";
- "Options".
When pressed simultaneously, the work starts, which is accompanied by a sound signal. The hatch door must be closed.
Stage No. 1. Checking Linear Parameters
Testing is carried out in several stages . First, the performance and response of the linear components are checked:
- heating element;
- fill valve;
- drain hose;
- module generating Eco Bubble bubbles.
By pressing the temperature selection button, the valves are checked:
- The first press causes water to be drawn through the first tray of the cuvette.
- On the second - through the second.
- According to the third, the flooding of water stops.
Pressing “Spin” makes it possible to check the functionality of the drain system:
- The first press - check the drain hose.
- Secondly, turning on the Eco Bubble pump means bubbles appear in the drum.
- The third one is shutdown.
Clicking “Options” allows you to test the heating element. If there is a failure, an error will appear on the display.
Stage No. 2. Motor and sensor testing
By rotating the mode selection knob, it is possible to test a certain type of operation of an automatic washing machine:
- moving the pointer to “Hand wash” allows you to determine the speed of the motor;
- setting it to “synthetic” makes it possible to see the rotation speed increasing;
- “Rinse and spin” shows the temperature of the water in the drum and the operation of the sensor;
- to “spin” - the water level sensor is tested, etc.
Passing the test mode allows the user to independently check the performance of the systems and identify possible problems.
Troubleshooting and information codes INF...
Page 30
- Image
- Text
30_
Troubleshooting and Information Codes
INFORMATION CODES
If there is a malfunction in the washing machine, an information code may appear on the display. If this occurs, review the information in this table and try the suggested solution before calling customer service.
CODE DESIGNATION REMEDY
dE
•
Close the door.
4E
•
Make sure the water tap is open.
•
Check the water pressure.
5E
•
Clean the debris filter.
•
Make sure the drain hose is connected correctly.
UE
•
The laundry is not loaded evenly. Redistribute laundry. IN
When washing only one item (for example, a terry robe or jeans), the final spin result may not be satisfactory and the error message “UE” will appear on the display.
cE/3E
•
Contact technical support.
If any other codes are displayed or if the suggested solution does not solve the problem, contact your Samsung Customer Service Center or your local Samsung dealer.
Search and elimination
malfunctions and
information codes
WF8592FE-02613C_EN.indd 30
2008-11-17 ¿AAb 11:22:58
Comments
Select → I found the instructions for my washing machine here! #manualza
- Click →
I'm not stupid, I strictly follow the instructions.
Manualza!manualza.ru
Still not with us?
Cleaning the debris filter, Cleaning the water supply hose strainer
Page 27
- Image
- Text
washing machine cleaning and maintenance _27
03 CLEANING AND MAINTENANCE
CLEANING THE DEBRIS FILTER
It is recommended to clean the debris filter 5-6 times a year or when the error message “ 5E”
" (See the section “Emergency draining of water from the washing machine” on the previous page).
1.
Open the filter cover using a coin or
key
2.
Unscrew the plug of the emergency drain tube,
turning it to the left and drain all the water.
3.
Unscrew the debris filter plug.
4.
Rinse away dirt and other debris from the filter
for garbage. Make sure the drain pump blades located behind the debris filter are not dirty.
5.
Reinstall the debris filter plug.
6.
Replace the filter cover.
CLEANING THE WATER SUPPLY HOSE MESH FILTER
The water supply hose strainer should be cleaned at least once a year or when the error message “ 4E”
”:
1.
Turn off the water supply to the washing machine.
2.
Unscrew the hose attached to the back wall of the washing machine. For
To prevent water from spilling out under the influence of air pressure in the hose, cover the hose with a rag.
3.
Using pliers, carefully remove the strainer located
at the end of the hose and rinse it with water until completely clean. Also clean the inner and outer surfaces of the threaded connection.
4.
Reinstall the filter.
5.
Connect the hose to the washing machine.
6.
Make sure the connections are secure and open the water tap.
Debris filter plug
WF8592FE-02613C_EN.indd 27
2008-11-17 ¿AAb 11:22:58
