icons on a Zanussi top loading washing machine

Washing modes and times in Zanussi washing machines

Since modern washing machines have a lot of programs and functions, the user needs to be able to use them.
To do this, the manufacturer indicates the washing modes for the Zanussi machine on the control panel, marking each of them with an icon. The explanation of such icons can be found in the operating instructions. But if you don’t have the opportunity to look into it, then our article will come in handy.

Basic washing steps

Before starting the washing machine, it is necessary to check the condition of the tap providing water supply. Then connect to the power supply and place the necessary items into the drum.

The next step will be to determine the required mode. As mentioned earlier, for this you need to take into account the nature of the material from which the thing is made. At the initial stages of working with the device, it is recommended to have instructions with all the prescribed characteristics of Zanussi programs. Over time, the choice of modes will occur almost intuitively. After that, pour powder, conditioner and stain remover into the detergent container.

The last step will be to select a mode or set all the main indicators manually using the rotary selector. If necessary, you should select additional options. After that, press the “start” button as indicated in the instructions.

Zanussi program table: description and symbols

On Zanussi washing machines, the designations are practically no different from other models. There are icons around the rotary switch, the descriptions of which can be found in the table below. Basic and additional modes allow you to effectively care for your laundry.

You can select the Zanussi mode for a specific type of fabric or according to the degree of soiling of the items.

*The table shows approximate time frames. The cycle duration may vary within these limits or go beyond them - it depends on the specific model. Take a look at the instructions for your machine - in most of them, the table of programs also includes time consumption.

How to select and turn on a mode on a Zanussi washing machine

The user must know how to properly configure and install one or another mode. To select, you need to turn the program selector and stop it at the desired mode. Activate additional functions by pressing buttons. The cycle time depends on the installed program.

Source

Basic modes

Any washing machine has basic buttons such as “Spin”, “Drain” or “Delicate Wash”, which are considered the most popular and in demand among housewives. But it’s not always possible to find the right design the first time - the designations on a Zanussi typewriter have some differences. Therefore, you should not act at random and by intuition, because it is better to get to know your new home assistant better in advance. A description of the icons on the panel will help you decide on the appropriate washing program.

1. Schematic representation of cotton plant in the form of a dotted circle and a check mark. It is logical that we have “Cotton”, designed for washing cotton linen of various colors with a high temperature range of 60-95 degrees. Lasts approximately 2-3 hours and allows you to wash even heavily soiled items.

Important! Approximate data are provided, since the duration, temperature and spin intensity vary depending on the Zanussi washing machine model.

1. Broken round triangle. It is called “Synthetics” and means washing at 30-40 degrees with a reduced spin cycle. Considered optimal for underwear, towels, shirts and tablecloths by preventing wrinkles. Time – 85-95 minutes.
2. Three circles and two curved lines, together resembling a tree. Indicates an auxiliary energy saving function that, when activated, saves electricity. For example, turning on the option at 90 degrees will provoke a decrease to 67, and at 60 degrees – to 40. Suitable for everything except express washes.
3. Flower. It designates a delicate wash, used for delicate fabrics, lace and other items marked “Hand Wash” on the label. Average duration is 70 minutes.
4. Jeans. The image speaks for itself: the button is designed for denim items. An optimally selected temperature of 40 degrees, minimal spin and a cycle of 130-140 minutes help avoid fading and shedding.
5. A skein of thread. Designed for woolen items. It features low temperatures up to 40 degrees and no spin, which eliminates shrinkage and the appearance of pills. Lasts on average from 50 to 60 minutes.
6. Drawn bib. Directly indicates a child's purpose. Involves gentle cleaning of the fabric at 30-40 degrees with copious rinsing for half an hour.
7. Cross. Behind the “medical” icon lies a hygienic wash that can rid clothes of dust mites and allergens. The machine operates at a high 90 degrees and involves three rinses over a two-hour cycle.
8. Wrinkled fabric. This image indicates special programs for washing blankets at 30 or 40 degrees. The filler of washable items does not matter, therefore it is considered universal for bulky items. On average, the cycle duration does not exceed 75 minutes.
9. Boot. The meaning of the button is suggested by the design itself - it is selected for cleaning various shoes in the machine. A full cycle lasts more than 2 hours, during which the product is washed at 40 degrees, rinsed three times and dried at a spin speed of 1000 or more rpm.
10. A month and two stars on a black circle background. This is an “Overnight wash” lasting at least 2 hours. The main differences are the silent operation of the machine and minimal energy consumption. The temperature varies, there is no spin, and the water remains in the drum until the user initiates a separate spin cycle.
11. Image of a tank with the letter "I". This means a pre-wash intended for the initial washing of heavily soiled items. The water is heated to a temperature of 30, and the drum rotation time depends on the type of fabric and takes from 40 to 115 minutes.
12. T-shirt with a black spot. Another auxiliary function called “Stain removal”. In addition to pressing the button, you need to pour the stain remover into a special section of the dispensary. It is optimal when the water in the tank is at 40°.
13. Drawing of a filled tank with a “+” on top. This is what an additional rinse looks like, which can be turned on after the main wash to completely clean the fabric of detergent residue. It will take about an hour to wash out.
14. Spiral. The familiar “Spin” is used for more intensive rotation of the drum or after an overnight wash. The duration is determined by the drum load and the set power, but usually does not exceed 20 minutes.
15. Half-filled tank with an arrow pointing down. Implies forced draining. A full tank is drained in 7-10 minutes. Required after overnight washing and soaking.

Knowing the explanation of all the pictures printed on the control panel, you can use the home assistant more efficiently and conveniently. Also, a competent approach will save things from damage, fading and shrinkage. Better quality washing and the ability to plan the duration of the wash would be helpful.

Operation | Operating instructions for Zanussi FE 802 | Page 8 / 33

Date: March 28, 2022 Washing machines are mechanical units designed for washing various fabric products. One example is Zanussi washing machines, which are divided into activator and drum based on the types of working bodies. The first version of washing machines is more complex and cumbersome, but Zanussi machines with drums treat things more carefully during operation, and use water and washing powder more economically. According to automation, Zanussi washing machines are automatic and semi-automatic. Zanussi SMAs are distinguished by a wide range of software, capable of assessing water quality, temperature, speed mode and spin time. Semi-automatic models are equipped with only a temporary timer. To facilitate control, the manufacturer has provided icons on the Zanussi washing machine to help set the necessary operating operations.

What modes are there in Zanussi?

The control panel of any machine contains either symbols or program names in a language understandable to the user. If a brand produces a product for a Russian consumer, then the inscriptions are made in Russian.

Users are often too lazy to understand the “hieroglyphs” and nuances of the modes offered by the manufacturer. Having memorized the sequence of pressing the buttons, they select one or two versions of the wash over and over again. But why then spend money on expensive and “smart” equipment if you do not take advantage of all the advantages of its design?

What to look for when choosing a Zanussi washing machine

When choosing your next home laundry assistant, pay attention to the characteristic features of different series of Zanussi washing machines. The wide range of Zanussi washing machines is both impressive and puzzling

Here, an unprepared buyer can get confused. But, thanks to a large selection of models, you can choose equipment to suit your own needs, based on the required washing functions, the number of family members and the intended location of the washing machine. In order not to get confused in this diversity, machines of each series with their own technical parameters and functionality have their own markings:

The wide range of Zanussi washing machines is both impressive and puzzling. Here, an unprepared buyer can get confused. But, thanks to a large selection of models, you can choose equipment to suit your own needs, based on the required washing functions, the number of family members and the intended location of the washing machine. In order not to get confused in this diversity, machines of each series with their own technical parameters and functionality have their own markings:

FCS – compact models with minimum height (67cm). Maximum loading volume – 3 kg.

ZWS – narrow format frontal machines. The depth of the unit is in the range of 33-44 cm, and the maximum loading range is 4-7 kg

ZWF – full-size frontal washing machines. The dimensions of the machines (HxWxD) are 85x60x60 cm, and the size of the loading drum can accommodate from 4 to 10 kg of laundry.

ZWQ and ZWY are top-loading machines that are mainly assembled in Poland. Models of the vertical series ZWQ and ZWY integrate an electronic control system Fuzzy Logic and automatic positioning of the drum, which always stops after the operating cycle with the flaps up.

IZ – washing machines equipped with an inclined drum. Because of this, the devices have a non-standard geometric shape. The capacity of the series machines is 5 kg.

To make it even easier for you to understand similar indices in the names of Zanussi car models, we offer an example of deciphering the markings of one of them:

How to decipher the icons?

Control panels can be designed in different ways. It’s good if the modes are signed, as, for example, in the ZWS 5107 model. But in most machines of this brand, control is carried out using graphic icons. So, the Zanussi Aquacycle 800 modification does not have any inscriptions - just symbols. The meaning of some signs is intuitive, others have to be deciphered. The instructions and our article will help with this. We have given in the table the meanings of the symbols most often used by the manufacturer.

Control panels of washing machines of different brands

Depending on the price range, manufacturer and main market for the units , the panels of individual machines are designed differently. Next, we’ll look at how the design of machines from leading manufacturers differs and which option is most convenient.

Icons on the Indesit washing machine

With Indezit, problems can arise in two cases: if you purchase a budget model, or if the machine was released several years ago. In addition, you can get confused due to the increase in the number of functions and the change in appearance of several icons.

For example, the “cotton” mode used to be designated as a cotton box, but now it is a white T-shirt. It's also easy to confuse the Soak and Pre-Wash icons. In the first case, the pelvis on the icon is depicted with a wave, and in the second - without.

Delicate items can be washed by selecting the flower button. The manufacturer also has the option of washing curtains with the corresponding sign . There is also such a useful option as drum imbalance control (image in the form of a circle with a double-sided curved arrow at the bottom).

Read more ► There is an unpleasant smell in the washing machine: what to do, how and with what to remove it?

Icons on a Bosch washing machine

Devices from this manufacturer are distinguished by an informative display.

The machine has the following functions:

• sportswear - T-shirt with number;
• children's mode – icon in the form of sliders;
• winter jacket - indicates the washing mode for outerwear.

Economy mode in a bosch machine is achieved by lowering the temperature and reducing the speed . At the same time, the operating time of the machine increases, which means the quality of washing clothes will not suffer.

Zanussi washing machine icons

In general, the symbols here are the same as on other devices. Three circles and two tree lines indicate eco-wash. Child mode is depicted as a bib. The cross indicates program , suitable for getting rid of mites and various allergens. A filled basin with a “+” symbol on top is intended for additional rinsing of clothes .

The image of crumpled fabric is the mode that should be turned on when washing blankets. In this mode, you can also wash outerwear on a Zanussi machine, since the filling of the product does not matter.

the user’s shoes – just select the button with the image of a shoe. In this mode, rinsing occurs three times. Shoes are dried at a speed of 1000 rpm.

Basic designations

In an effort to differentiate the icons on the washing machine, most manufacturers go overboard to the point where it becomes difficult to know which function should be activated. For this reason, we will look at the designation of Zanussi washing machine icons together.

For any manufacturer, the main symbols are divided into four groups:

In most cases, the symbolism is similar, and this makes it possible to understand what certain icons mean without referring to the operating instructions for the washing machine.

Checking the connection of the Zanussi washing machine to the sewer

Before using your Zanussi washing machine, check that it has been correctly connected to the sewer system. The basic rules for connecting a device are usually indicated in the instructions. However, you should make sure of the following points:

1. The drain hose is raised by 70 - 80 centimeters. This prevents self-draining, excessive water consumption by the device and problems with switching to the rinse mode.
2. The hose is no more than 4 meters long and is not bent too much.
3. The drain pipe of the machine is securely attached to the drain of the sink or bathtub.

The instructions say that compliance with these positions is necessary for the safe, long and efficient operation of the Zanussi mechanism. If the basic rules for connecting the machine to sewerage, water supply or electricity are not followed, it will experience frequent malfunctions and breakdowns.

Decoding the markings of Zanussi washing machines

The name of the equipment is systematized - the designation contains the main parameters. Understanding the labeling will help you navigate the variety of assortments.

Explanation of the name using the example of a front-facing machine ZWSE7100VS. The alphanumeric series characterizes the basic parameters of the washing machine: loading method, capacity, spin speed, series and appearance

All markings can be divided into three blocks. Let's look at the gradation using the example of ZWSE7100VS .

Block 1. In this case, the letter marking ZWS , which means:

Narrow compact modifications are marked FC - Front Compact, built-in modifications are designated ZWI , where I - Integrated.

Block 2. Displays the functionality of the unit. In our example, it corresponds to the link E710 . Marker decoding:

Block 3. The last signs indicate the design of the washing machine - the color of the body and door.

Pros and cons of Zanussi washing machines

The Zanussi brand is a well-known brand of household appliances. The company was founded in 1916 in Italy as a manufacturer of wood-burning stoves. Since the middle of the 20th century, the company has significantly expanded its product range and put the production of washing machines on the conveyor belt.

During the financial crisis of the 80s, the brand became part of the large Swedish manufacturing concern Electrolux. The merger of capitals strengthened the positions of the two brands.

The production of washing units reached a new level in 1984 - the concern integrated its own development of automatic regulation of water consumption and energy consumption depending on the weight of the laundry.

Zanussi is a transnational corporation with a vast geographical location of equipment production plants. In addition to Italy, the production of washing machines has been established in Russia, Ukraine, Poland and France, Romania, Germany, Great Britain and Turkey

The strengths of Zanussi cars include:

All equipment meets European standards. Regardless of the country of origin, washing machines are reliable and durable.

Rating of units of different brands. The evaluation criterion is the number of calls to service centers during the first three years of operation. Zanussi takes 3rd place, the list of reliable equipment is headed by Bosch washing machines

Washing machines are aimed at a wide range of users, and therefore their price is quite affordable.

The track record of shortcomings is more modest . The list was compiled based on an assessment of technical equipment and consumer reviews. Significant disadvantages:

The operation of washing machines cannot be called silent. The sound pressure level at the peak of spin reaches 72-80 dB. The negative aspects include the persistent smell of rubber - the “aroma” persists for the first 2-3 weeks of use.

Production of Zanussi washing machines

Despite the fact that the company is originally from Italy, today its production facilities are located all over the world. The equipment is manufactured in Poland, Sweden, France, Russia, Ukraine, using European components. At the same time, control is exercised over the assembly of units, which ensures equally excellent quality of products and allows us to set reasonable prices for them.

Interesting! Initially, since 1916, the company was called Officina Fumisteria Antonio Zanussi and was engaged in the production of cookers. Only almost 40 years later, in 1954, it was renamed Zanussi and began producing washing machines.

In the 80s, the economic crisis affected the company's activities, and therefore it had to merge with the large Electrolux concern. This helped both brands become leaders in the production of household appliances and begin serial production of automatic machines. The brand has existed in Russia since 1994.

Washing machine Zanussi

General recommendations for using a Zanussi machine

In addition to the rules specified in the instructions, there are informal recommendations for using the device. In general, among the main rules of conduct with Zanussi washing machines are the following:

• To prevent the mechanism from wearing out and to minimize the risk of breakage, try not to load the drum completely. At the same time, make sure that there is no overweight, which can also cause damage to the device.
• Do not set the temperature to high temperatures unnecessarily. This will reduce energy consumption. The optimal heating rate is 30 degrees.
• The most optimal Zanussi spin level is 600,800 rpm. Higher speeds have a negative impact on the bearings and seal.
• Take care of your glass. Wipe it dry after each wash, and then scale will not accumulate on it.
• Disconnect the device from the network after finishing work. This way you will protect the power supply from overheating and significantly extend its service life.
• Also, do not forget to “ventilate” the device. After turning off the device from the power supply, always open the powder container slightly for 15 - 20 minutes.
• Don't forget to clean your Zanussi machine. Once every few months, run a dry wash by pouring a special anti-scale agent into the dispenser. The operating temperature, according to the instructions, should be maximum.

• To prevent the mechanism from wearing out and to minimize the risk of breakage, try not to load the drum completely. At the same time, make sure that there is no overweight, which can also cause damage to the device.
• Do not set the temperature to high temperatures unnecessarily. This will reduce energy consumption. The optimal heating rate is 30 degrees.
• The most optimal Zanussi spin level is 600 – 800 rpm. Higher speeds have a negative impact on the bearings and seal.
• Take care of your glass. Wipe it dry after each wash, and then scale will not accumulate on it.
• Disconnect the device from the network after finishing work. This way you will protect the power supply from overheating and significantly extend its service life.
• Also, do not forget to “ventilate” the device. After turning off the device from the power supply, always open the powder container slightly for 15 - 20 minutes.
• Don't forget to clean your Zanussi machine. Once every few months, run a dry wash by pouring a special anti-scale agent into the dispenser. The operating temperature, according to the instructions, should be maximum.

We invite you to read 10 tips on how to extend the life of freshly cut flowers.

Badges on a Zanussi washing machine

Washing machines are mechanical units designed for washing various fabric products. One example is Zanussi washing machines, which are divided into activator and drum based on the types of working bodies. The first version of washing machines is more complex and cumbersome, but Zanussi machines with drums treat things more carefully during operation, and use water and washing powder more economically. According to automation, Zanussi washing machines are automatic and semi-automatic. Zanussi SMAs are distinguished by a wide range of software, capable of assessing water quality, temperature, speed mode and spin time. Semi-automatic models are equipped with only a temporary timer. To facilitate control, the manufacturer has provided icons on the Zanussi washing machine to help set the necessary operating operations.

General tips for working with Zanussi washing machines

Zanussi washing machines are durable and reliable. Their main advantages are the ability to work in accelerated or silent mode, the presence of programs that provide delicate cleaning of children's things, energy saving and disinfection. The company also provided consumers with the ability to quickly determine the cause of problems using codes displayed on the display.

The causes of breakdowns and emergency situations are often non-compliance with the rules and recommendations specified in the instructions, incorrect installation or frequent power failures.

Basic designations

In an effort to differentiate the icons on the washing machine, most manufacturers go overboard to the point where it becomes difficult to know which function should be activated. For this reason, we will look at the designation of Zanussi washing machine icons together.

For any manufacturer, the main symbols are divided into four groups:

Setting up the machine before washing

Deciding on the mode is half the battle, since it still needs to be configured correctly. We are talking about both changing the programmed parameters and connecting additional options. The general sequence is:

• connect the machine to the power supply;
• find a programmer;
• scroll the selector until the pointer aligns with a specific character;
• adjust the number of revolutions and temperature;
• activate child lock, energy saving mode or other auxiliary function;
• check the correctness of the specified parameters;
• click on “Start”.

On some models, it is possible to adjust the specified cycle during operation of the machine. Just click on “Pause”, make changes and continue washing again. In this case, the time is adjusted automatically, depending on the program and connected options.

Interesting:

• Marking of Electrolux washing machines
• How does a Zanussi washing machine work?
• Designations on the Indesit washing machine
• Symbols on the Bosch washing machine
• Washing machines Zanussi
• Malfunctions of Zanussi washing machines

Reader comments

• Share your opinion - leave a comment

Explanation of other icons

To switch modes, there is a rotary toggle switch, around which there are certain icons, the meanings of which are given in the table:

A drawn “snowflake” icon means that the wash is done in cold water. The lock icon indicates that the washing machine is childproof. The tree pattern indicates the eco-wash mode.

The time intervals for operating a Zanussi machine are approximate. The duration of the work process can vary within the specified parameters - it all depends on the modification of the Zanussi machine . As a rule, the manufacturer of the Zanussi car provides special tables containing information about time consumption in the instructions.