Bosch classixx 5 – instructions for operating the washing machine in Russian

Today, a washing machine is an essential attribute of any family. It not only makes life easier, saving time, but also allows you to rationally use resources - electricity and water.

When replacing their household appliances, in the current economic situation, most consumers rely on budget models. At the same time, you don’t want your new purchase to be inferior in quality or basic set of necessary functions.

For home use and those who are definitely committed to good quality appliances, the Bosch line of washing machines >

Characteristics and features

The dimensions of the Bosch Classixx 5 washing machine are quite compact. A depth of 40 cm will allow you to comfortably install the device even in a small bathroom.

Freestanding models with front loading. For installation, the manufacturer provides for dismantling the top cover. For the convenience of consumers who use the device as a free-standing device, the manufacturer has provided an anti-slip surface on the top cover.

The maximum weight for loading laundry per wash is from 4.5 kg to 5 kg, depending on the model. It is worth noting that this value indicates the weight of dry laundry. Many consumers are confused by such numbers. Avoid overloading. In any case, the machine can perform the operation, but the components will wear out faster and will require replacement after the first year of operation.

A distinctive feature of this model range, according to many users, is the high-quality washing of delicate fabrics, which previously could only be washed by hand.

Washing machines of the Bosch Classixx 5 line independently control the distribution of laundry in the drum, thanks to an imbalance control system.

In one wash cycle with a full load, the device consumes approximately 45-52 liters of water.

Difficulties and ways to overcome them

The Bosch washing machine has a complex structure, so when disassembling it, a person without experience may encounter certain difficulties, namely:

1. Incorrect connection of wires and fastening of parts. This can be avoided by photographing the initial position of the elements.
2. Wedging of the housing walls. Most often this happens with the top cover of the machine. If it is difficult to remove, then it must be carefully pryed off with a flat, blunt object.
3. Bolt sticking. To loosen the ties, they need to be lubricated with silicone.
4. Water leaking from the emergency hose. It must be opened in advance, even before the analysis begins. There is always a certain amount of liquid remaining in the pipes, which can get not only on the floor, but also on the electronics. This should not be allowed.

Fault reporting

Equipment from a German manufacturer, now produced in Russian assembly, is capable of independently identifying a malfunction and informing the user about its presence.

The most common errors of the Bosch Classixx 5 washing machine are due to excessive foaming. In this case, two indicators light up simultaneously: rinse and spin. To prevent such situations, it is worth observing the dosage of chemicals used for washing. Often, excessive foaming occurs when performing intensive washing programs. To correct the situation, just turn on the extra rinse cycle by selecting the program on the control panel.

If an error code F19 appears on the display or two indicators light up simultaneously - “spin at 800 rpm” and “rinse”, this indicates a breakdown of the heating element. Bosch Classixx 5 also says about the failure of the heating element:

• constantly knocking out machine;
• cold water, even if the program temperature range is 40-60 degrees;
• The washing machine may not continue the program, but after filling the tank with water, drain it after a short amount of time.

We start by removing the top panel

In general, all washing machines are designed approximately the same, so the disassembly sequence we are describing now can be useful for owners of most modern machines. However, the main hero of our material is the Bosch brand, or more precisely, the washing machines it produces.

We recommend starting disassembly by removing the top cover, because, firstly, this is one of the simplest operations, and secondly, the top cover gives access to many important parts of the washing machine hidden inside, for example, the control panel.

So, first the top panel is removed. To do this, simply unscrew a few screws that hold it and slide it, and then completely remove the cover.

High-quality Bosch equipment allows you to save

Thanks to the technologies used by the German manufacturer, you can save significantly with washing machines from the Bosch Classixx 5 line:

1. Loading up to 5 kg allows you to wash a full set of double bed linen with towels at a time.
2. The device draws water in accordance with the loaded kg. There is no need for consumers to hoard clothes to wash in order to save resources.
3. Consumers have access to a super-fast wash, lasting 30 minutes. This mode is used if you just need to refresh things. This mode is not suitable for getting rid of heavy dirt. In addition, for high-quality washing and rinsing in a quick wash, the drum should be loaded halfway.

Bosch Classixx 5: washing modes

The devices have a full basic set of functions:

• Washing synthetic fabrics at three temperature levels (30, 40, 60 degrees).
• Washing cotton fabrics at three temperatures (30, 40, 60 degrees).
• Washing delicate, thin fabrics, wool.
• Washing dark fabrics, down jackets, mixed, intensive wash at 90 degrees (availability of modes depending on the model).
• Quick wash (15/30 min).
• Additional rinse, spin.

Installation and first launch: instructions for users

According to the Bosch Classixx 5 operating instructions:

1. The inlet hose of the washing machine is connected to a cold water supply.
2. The drain hose is discharged into the sewer.
3. The device is installed by level. If this item is ignored during operation, the washing machine may vibrate strongly and make noise.
4. Before the first start, it is necessary to remove the transport bolts that hold the drum during transportation.
5. The first start of the washing machine should be done without laundry. It is best to use a special powder designed to clean the washing machine from industrial lubricants. The composition is placed in the main wash compartment and the “Cotton 60” program is started.

Advantages of the model range

After analyzing user reviews, we can note the following advantages of washing machines from the Bosch Classixx 5 line:

• compliance with the technical requirements stated by the manufacturer;
• ease of use;
• convenient intuitive control;
• excellent washing quality;
• quiet;
• even with a large number of revolutions they do not budge;
• the ability to completely remove the powder loading tray for cleaning.

We will supply a new part

There is a recommended assembly algorithm when replacing the handle of Bosch machines

It is important to follow the directions carefully. The procedure is as follows:

• install the spring;
• place the clamp on the side of the spiral;
• holding the lock, insert the pin halfway. At this stage, the rod does not advance all the way, only into the first ear of the spring;
• “hook” the handle onto the latch, pull the pin completely.

After completing the assembly of the mechanism, the halves of the hatch should be connected. The glass is installed under the handle, and the outer part of the door is laid. The fixing bolts are screwed into place. You can then check how well the locking device works. Next, the sash is hung back on the hinges of the body of the Bosch washing machine.

Disadvantages of the model range

However, there are also disadvantages:

1. Water accumulates under the drum collar, which can cause mold to appear. This problem applies to absolutely any model of washing machine, regardless of the manufacturer. To avoid the formation of mold, it is recommended to remove any remaining liquid and moisture with a dry cloth.
2. In some modes the waiting time is quite long. This is due to the specifics of program cycles. Almost all Bosch Classixx 5 models have the ability to select a fast mode, which significantly saves time when washing things without heavy soiling.

a brief description of

The dimensions of the washing equipment are 60x85x40 centimeters. It is not an addition to countertops or other interior elements.

The maximum drum load is 5 kilograms. Washing efficiency class - A. This means that the washing result will be maximum, even if old persistent stains are present on the items. The type of machine provides a frontal method of loading laundry.

What to do after purchasing the device?

After delivering the washing equipment home, the first thing you need to do is check whether there are any defects on it. If the machine has any damage, the seller will accept it back without any problems within two weeks from the date of purchase. If you apply later, difficulties may arise. Even considering that the equipment is under warranty.

After checking, you need to install the washing machine in a certain place and unscrew the transport bolts. The place for the machine must be completely prepared in advance.

To do this you need:

• Level and strengthen the base;
• Dismantle unstable floor coverings (laminate, carpet);
• Ensure that the machine is connected to the electrical network, water supply and sewerage;

Bosch Classixx 5 does not require the purchase of various additional accessories. However, to reduce the noise level created when the machine vibrates, it is advisable to purchase anti-vibration stands for the legs.

It is important to note that Bosch Classixx 5 washing equipment must be installed level. Then it will be less likely to fail and create unnecessary problems.

Try to align the unit body perfectly. To do this, you need to place a building level on the machine, then twist its legs one by one until it is level.

For a more detailed study of the process of connecting the machine to communications, you should use the original instructions. Then you can do all the work yourself without much difficulty. However, if you do not have experience working with washing equipment, then it is better to entrust its connection to professionals.

Removing the main components

We move on to the next stage of disassembling the car from the Bosch company. Having removed all the walls and panels from the device, we exposed parts and components that must be carefully dismantled. It would be best to start with the top elements:

in front of us is a metal strip connecting the walls of the Bosch washing machine. After unscrewing the screws, it must be removed; Using a key set to 14, unscrew a pair of bolts holding the upper counterweight and remove it out; A little earlier we took out the powder tray and freed the dispensing body, which is held only by the pipes. It is necessary to move the dispenser slightly and remove the clamps located under it that secure the pipe. To do this job you will need pliers. In a similar way, the pipe leading to the water intake valve is dismantled, after which the dispenser is moved to the side so as not to create interference; in the upper body of the Bosch machine there is a pressure switch with tubes and wiring connected to it. There is also a power cable with a noise filter located here.

The listed parts are freed from electrical wiring and carefully dismantled.

After completing the above steps, you should unscrew the debris filter and drain the remaining water inside. In principle, such work can be done at the beginning of disassembly - there is no difference in the sequence. Cover the floor with rags in advance - there may be more water than you expected. All that remains is to loosen the screws securing the loading door hinges and remove it. To the right of the hatch we find another pair of screws, unscrew them and dismantle the device blocking the door.

Let's move on to the back of the Bosch washing machine. Now you need to remove the drive belt and disconnect the electrical wiring from the engine. To dismantle the motor, we use a 12mm wrench, which is convenient for unscrewing the mounting screws. By pushing the engine away from you and down, holding it with your other hand, you can easily remove this element.

Let's pay a little attention to the lower part of the washing machine from Bosch. If the model does not have a tray, you can immediately remove the pump and dismantle the pipes. If there is a pallet, certain actions must be performed:

1. the washing machine is placed on the left side;
2. the pallet fastenings are unscrewed;
3. the element is pulled off the plastic clips, but your actions must be careful not to damage the wiring of the sensor that monitors possible leaks;
4. the wiring is disconnected from the sensor, the pan is removed to the side;
5. remove the clamps from the drain pipe and dismantle it from the pump;
6. disconnect all wiring from the pump, unscrew the fasteners, and remove the assembly out;
7. unscrew the fasteners connecting the racks to the body of the washing machine.

There are only a few steps left - unscrew the counterweight located in front so that it does not interfere with removing the tank and drum, disconnect all the wires from the water heating element. By the way, we leave the heating element in place for now and remove the springs holding the drum and tank. This completes the next stage of disassembly.

Control panel

The instructions for the Bosch Classixx 5 washing machine tell us that it is necessary to study the design of the control panel. This will allow you to avoid serious mistakes during the operation of the equipment.

The control panel contains the following elements:

1. Handle for selecting the washing program. Since the washing machine contains only one handle, it is not possible to confuse this element with anything else.
2. Display. Necessary for displaying all kinds of information useful to the user.
3. Buttons. To start or stop the washing program, you must press the second button on the right. Other buttons are needed to control various functions.
4. Detergent tray. Contains three sections. Conditioner, detergent, etc. are added to it.

Repairing a Bosch automatic washing machine: getting to the equipment yourself

You can fix the malfunctions from our list below with your own hands, provided that you pay close attention to the process of assembling and disassembling the device and correctly perform replacement or other manipulation regarding the internal equipment.

The drain pump has failed: how to replace it

Before disassembling the device, be sure to drain the water from it, otherwise you will wet all the parts in the machine. To get to the drain pump of the machine, you need to disassemble the back and top wall of the housing of the household appliance. Then turn the car on its side, having first secured the drum with bolts. Then remove the pump by disconnecting the terminals. After the manipulation has been done, we take a new structure suitable for this model of machine and securely fix it in its original place.

Repairing a bearing yourself: stages of the procedure

The bearing in the washing machine is responsible for the correct operation of the drum; if it wears out, it must be replaced so as not to damage the drum itself. To do this, follow the algorithm:

1. We remove the body from the washing machine, remove excess water and debris from the tank.
2. The difficulty is that you need to disconnect all the panels, the powder dispenser, remove the door clamp and cuff, and pull out the lock.
3. Once these steps have been completed, we proceed to detach the tank. To do this, remove all the fixing bolts.
4. The drive belt should be pulled to the side to avoid accidentally damaging it.
5. Unscrew all the bolts that hold the plastic tank and remove it from the springs.
6. Having reached the metal part of the drum, remove the pulley and existing bolts from it.
7. A metal bearing is installed on the back of the drum.
8. Knock out the damaged part and install a new one, performing all the steps exactly the opposite.

Good to know!

In order not to confuse all the connections during assembly, it is best to photograph complex stages of work. Thus, you will be able to design a washing machine without errors.

How to remove and change the drive belt on a Bosch washing machine

Replacing the drive belt is carried out within a few minutes, so this work is considered elementary. All you need to do is remove all the screws on the rear convex cover. Opening it, you will see the motor drive and the drum along which the belt moves.

To remove it, you need to carefully pull it away from the parts, slightly turning the drum wheel. Put on the new belt in the same way. For clarity, watch this short video.

Heating element replacement procedure

If the water in the washing machine tank is cold and does not heat up during the operation of the device, this indicates that the laundry is unlikely to be washed. If you look inside the problem, then the damage to the heating element is to blame. To extract it, consider the following short instruction.

As you can see, disassembling a Bosch washing machine to replace the heater is a very lengthy and painstaking job, so you should pay close attention to all the points.

How to clear a clogged drain hose when repairing a Bosh washing machine at home

During the long operation of the automatic machine, you may have noticed that when you turn on the water does not enter the tank as quickly as it did initially. If this is not a problem with your water supply pressure, then the water supply hose filter is clogged.

In order to clean it, you need to unfasten the tube on the back of the machine body. Remove the mesh that is placed inside the hose and screwed on using a thread. Rinse it well under running water and dry. Then install it in place and enjoy excellent water pressure.

Electrical or electronic malfunction

Not being a specialist in the field of electronics or electrics of automatic washing machines, it is better to contact a service center that will carry out diagnostics and necessary repairs. You can learn more about the nuances of repairing this part of the device from the video below.

First start

The machine contains an on and off button. The program selection toggle switch performs this function. To turn off the machine, you need to set the handle to the off position (up).

When you turn the toggle switch, the unit is activated automatically, after which it is waiting. To start the machine, you need to select the correct program, then use the buttons to add the necessary functions and parameters, then press the start button.

When starting the equipment for the first time, you must perform the following steps:

1. Select the mode using the knob;
2. Open the tray and add washing powder;
3. There is no need to load laundry, since when you first start it is necessary to wash the internal elements of the machine;
4. Select the required functions using the buttons on the control panel.
5. Press the start button;
6. Wait until the selected program finishes.

It is also possible to install a child lock. It's very easy to do. You need to press the “start” button and hold it for four seconds.

Diagnostic mode

Washing machines do not display all the errors described below to the user on the display or through indicators. To obtain the most complete information, there is a diagnostic mode, which can be entered through a sequence of switching controls. Let's look at the example of the bosch maxx 5 model (similar to the bosch maxx 6 and bosch maxx 7).

1. Plug in the machine and close the door.
2. Move the program selector to the vertical position.
3. Wait 2-3 seconds.
4. Move the selector to position 8.
5. Wait for the Start/Stop button to flash.
6. Press and hold the “Spin speed” button.
7. Move the selector 1 position clockwise.
8. Release the button.

The washing machine display or a combination of indicators will display the latest machine malfunction.

To start a new test, you need to select the analysis program using the selector.

A few safety rules

It is important to remember that the Bosch Classixx 5 machine is an electrical appliance. Therefore, there is a risk of electric shock. Try not to touch live equipment parts.

When pulling the device's plug from the socket, pull it by grasping the base. Do not pull the cord! Make sure your hands are dry when pulling out the fork.

Bosch Classixx 5 is equipped with a large drum that a small pet can climb into.

Car care

Some people clean their machine using cleaning products that contain chlorine or acid. There is no need to do this. After washing, it is enough to wipe the machine dry with a clean cloth.

Traces of dirt may appear on the body of the device, which cannot be removed simply with a rag. In this case, you should use a soapy sponge. It is necessary to wipe the dirty area with a sponge, and then walk with a damp cloth. Next you need to use a dry cloth. Don't forget about the powder receptacle. When using the machine for a long time, undissolved washing powder accumulates in it.

To clean the remaining internal elements, special products are used. You can use machine cleaning products that can clear limescale deposits, remove traces of mold and get rid of bacteria. When using such products, you must carefully read the instructions on the package.

The Bosch Classixx 5 washing machine is a simple but reliable appliance with German roots. And although, recently, the quality of these machines has decreased somewhat (perhaps due to Russian assembly), they still pose serious competition to automatic machines of other brands. If you require instructions for using this model of machine, we will provide it. In this publication, we have presented a short version of this document and attached the original instructions to it, all of which you can use for free.

Common Mistakes

When removing the cover of a Bosch washing machine, mistakes are possible, especially if a person has no experience in carrying out such work, including:

The bolts securing the cover are not unscrewed. If you do not remove them, the part may break. When trying to remove the top panel, considerable force is applied. This should not be done, as it may damage the plastic. A knife or other sharp objects are used to lift the part. This is fraught with the appearance of scratches and chips. Loss of original screws. After twisting, they need to be placed in a separate box.

It is not always possible to select screws that are suitable in size and thread. Careless handling of parts. The edges of the lid can be sharp and can easily cause injury.

After the purchase

Having delivered the washing machine home, you need to immediately unpack it and check it for defects. You must remember that if anything happens, the seller will take your machine back without any questions within 14 days from the date of purchase. Further problems may arise, despite the fact that the machine is under warranty.

Without delaying the matter, we install the machine in the intended place and remove the shipping elements. The place where you are going to put the machine must be completely ready:

• the base is leveled and strengthened;
• unsuitable floor coverings (carpets, carpet, laminate, etc.) were removed;
• the necessary communications have been provided (socket, sewerage, water supply).

Bosch Classixx 5 is not demanding on additional accessories, but still, in order to reduce vibration noise, you can add special anti-vibration stands for the legs. With them the machine works noticeably quieter.