How to open a locked door of an Indesit washing machine?

Published: 07 Jun 2020

You are faced with a situation where the washing machine does not open after washing, although the program was running normally, there were no error messages or extraneous noise. Let's figure out if this is a breakdown or something else.

From the practice of masters! Sometimes the washing machine hatch does not open due to water in the tank. Until it is drained, the door will remain locked. Although the situations are similar, the problem is not related to blocking. For detailed information on stopping the SMA with water, see the article “Why the washing machine does not drain the water.”

How to open a Samsung door?

Let's look at the main ways to open a locked door on a Samsung machine. ... How to open the door after washing?

1. turn off the machine;
2. set the “Drain” or “Spin” mode;
3. wait until it finishes working, then try to open the door again.

Interesting materials:

How to unpack an image in UltraISO? How to print A 3? How to print a PDF brochure on both sides? How to print in color? How to plan furniture in a room? How are the terminals located at Sheremetyevo? How to arrange furniture in the living room kitchen? How to position the desktop? How to arrange built-in appliances in the kitchen? How to manage overpayments in your Personal Account?

Why the door does not open - possible malfunctions

Most often, the car keeps the door closed for three reasons.

Breakdown of UBL - from 1200 rubles*

The most common reason why a washing machine does not open the door after washing is a faulty UBL. The bimetallic strip in the locking device usually fails. It wears out over time due to constant heating and breaks down. The lock is not repaired; the device is replaced with a new one.

On older washing machines, the lock is blocked by an electromagnetic device. It is more capricious, afraid of power surges, water, and overheating. If you have a veteran machine, and the UBL fails, then this is even for the better. The technician will replace it with a more modern thermal lock.

Handle breakage - from RUB 1,200*

The handle has metal and plastic parts. The plastic breaks faster due to stress and careless handling, and the handle has to be replaced. A characteristic sign of a broken handle is when its mechanism moves freely, but the hatch does not open.

Control module failure - from RUB 1,800*

The lock may not open after washing due to a failure of the control unit. Due to overheating, water entering the control unit or power surges, the part of the board responsible for controlling the UBL stops working. The technician diagnoses the module and finds out the cause of the failure. Repair is possible if tracks or radio components are damaged. If the cause is related to a processor malfunction, the entire unit will have to be replaced.

From the practice of masters! If unlocking your washing machine does not work, call a technician. Do not try to open the door by force. You may break the handle and repairs will cost more. Such cases are not uncommon in our practice.

*Spare parts are not included in the price and must be paid separately.

Unlocking a Samsung washing machine

The control of washing machines of famous brands differs depending on the functions preset by the manufacturer. For example, if a Samsung automatic machine is blocked and the door does not open 5-10 minutes after the wash is finished, unplug the cord and wait about half an hour. During this period of time, the program will be reset and the machine will open itself.

If after the end of the washing process the water has not drained from the tank, try running the spin program. If everything remains the same, then there is a problem in the pumping system. Forcefully drain the water using the emergency drain hose, which is located next to the filter, and then the machine door should open. As a last resort, the manufacturer builds a cable into its units to force the hatch to open.

Adviсe

• If the LG, Indesit, Samsung or any other model of washing machine does not open, look for the instructions, which should indicate a detailed action plan in this case.
• If the washing machine does not open, the reason may be water that remains in the device after the end of the washing program.
• Disconnecting the device from power may help unlock the system.
• The main failures that result in the hatch of the device not opening are failure of the automatic door locking system, as well as breakage of the handle.
• If the door is blocked due to a power outage, it is very important to completely drain the water through a special filter before manually turning off the system.
• If you are not entirely sure that you can unlock the door yourself, it is better to contact a service center. These are general tips and tricks only. Depending on the model of the machine, there may be a completely different plan of action. For example, if your Ardo washing machine requires repairs, we advise you to immediately contact a professional. If the locking system or handle of the washing machine is damaged, repairs will cost much more.

Mechanical failure

If all the proposed methods were unsuccessful, then you are not dealing with a malfunction, but the cause was a mechanical failure. Perhaps the lock or handle is worn out and needs to be replaced. Sometimes small children hang on the open hatch of a washing machine, which causes the hinge to become bent. In this case, the machine will stop closing, or will close, but it will be impossible to open it; the mechanism will jam.

What to do in such a situation? In this case, you can try replacing the hinges or locking device yourself. To replace the lock you need:

• remove the top cover of the washing machine,
• feel for the door locking device with your hand and move the latch, the lock will open immediately,
• After opening the hatch, begin replacing the locking device.

The process of replacing hinges looks a little more complicated, but if you are confident in your abilities, you can watch an explanatory video on this topic, which can be easily found on the Internet. If you do not have the necessary skills, you will have to call a technician from the service center who will fix the problem.

Emergency opening

After the water leaves the tank, the automatic door lock is released. However, in the case of manual draining, it happens that the water has not completely drained and the water control sensor does not allow the lock to be opened.

It also happens that due to a failure in the software settings, the lock gets stuck and the door cannot be opened even if there is no longer any water in the drum. Sometimes the cause is a mechanical failure of the latch.

But before using these methods, the machine must be unplugged. If it was not possible to drain the water first, you need to make sure that a huge puddle does not form on the floor after the emergency measures taken.

Emergency opening rope

Many washing machines come with a cable that can be used to open a locked door. You can find it at the bottom of the device, next to the filter.

Usually this cable is made in a contrasting color, red or orange, so it is impossible not to notice it. To outwit the lock, you need to pull it smoothly, without jerking.

Opening with a cord

If there is no cable in the car, but you have a thin synthetic cord or strong fishing line at hand, you can try to open the car with their help. This method is a folk one, so the possibility of its use depends on the design of the lock.

It’s unlikely that you’ll be able to understand exactly how the lock works when the door is closed, but if you don’t have time to wait for the locksmith and other methods don’t help, you can try this one. You will need to put the cord around the edges of the hatch around the entire perimeter and pull its ends up, as a result of which the cord will compress the latch and allow you to open the door.

Opening with a spatula

If you don’t have a cord at hand, but have a thin flexible spatula, you can use it. The principle of operation is the same as when opening the door with a cord. The end of the spatula must be inserted into the gap between the hatch and the car body and, pressing it, try to open the door.

Opening the door manually

If, after finishing the wash, the machine door is still locked and does not want to open even after a certain period of time, you can try opening the door manually. To open the washing machine lock manually, you should carefully understand the device instructions.

A specific sequence of actions that will help open a jammed door.

We remind you that simply de-energizing the device often helps.

In many models of washing machines, on the front panel, where the drain filter is located, there is a special cable, pulling which will open the doors in an emergency. Most often, this cable is orange.

However, some washing machines simply do not have such a cable. Therefore, to open the doors in an emergency, you will have to remove the top panel. After this, you need to tilt the machine back so that the drum moves slightly away from the front wall of the device. Now try to remove the latch and move it slightly to the side to remove the lock.

The washing machine is quite fragile, so if you are completely unsure that your manipulations will not harm it, it is better to call a professional. After all, if the lock is damaged or the handle is broken, replacing parts will cost much more.

The car stopped, there was water inside

When the cycle ends, the door is locked, and there is water left in the drum, which means there is a failure in the drainage system. First of all, we wait a few minutes to eliminate the opening delay after automatic locking. If the door is also motionless, then we try to “provoke” the car:

1. Turn on the standard “Spin” or “Rinse” mode.
2. We are waiting for the end of the cycle.
3. If the situation repeats, inspect the drain hose and, if necessary, clear the blockage.
4. We start the spin cycle again.

Each Samsung model also provides emergency opening of the washing machine. This is possible using a special cable, which is painted in an intense red or orange color. Most often it is located near the filter, behind a rectangular panel in the lower right corner of the unit. It is enough to slowly pull it towards you to remove the lock on the door.

Important! Be prepared for water to pour out of the open door.

For those who were unable to find the emergency release cable, we suggest using another method:

• disconnect the washing machine from the electrical network;
• We provide free access to the unit;
• remove the top cover of the machine;
• tilt the machine until the tank “moves away” from the door;
• inspect the opened locking mechanism;
• we find the tongue that locks the door;
• we remove the constipation.

All the described manipulations can be performed independently, but it will be faster and easier if you do it with outside help. If the door is still locked, it is best to look up the factory instructions for additional emergency measures. A specific model of a Samsung washing machine may have its own secrets.

A simple solution

One of the most common breakdowns of washing machines is the problem with the door opening after the end of the washing program. At the same time, many users of the device try to make an effort to get to the laundry, which only aggravates the situation.

Why doesn’t the machine open and how can you solve this problem yourself?

The main causes of breakdown are problems with the operation of the device, which automatically blocks the hatch, as well as breakdown of the handle itself.

If the malfunction is related to the operation of the hatch locking system, then most often this device cannot be repaired and requires complete replacement.

In order to make this replacement, you need to remove the top cover of the machine and unscrew the screws that secure the device. To get to the screws and unscrew them, you need to open the locked hatch. To do this, tilt the washing machine slightly and stick your hand in to manually unlock the door.

We suggest you familiarize yourself with What does an intensive wash cycle mean?

The locking device must be removed and replaced. To do this, you need to remove the rim-clamp that secures the door and disconnect the right side of the door cuff. A hand must fit into the hole to unscrew the external screws. Before you take out the lock, remember, or better yet, write down the order in which the automatic lock device was connected.

To install a new automatic locking system, we perform the same steps, only in reverse order. After all the parts are installed and everything is screwed, you can proceed to the test. To do this, plug in the machine and run a washing program. While the device is operating, the door should be locked, and after the program is completed, it should open after a few minutes.

Another common reason why the washing machine does not open is that the handle is broken.

The easiest way to solve this problem is to completely replace the handle with a new one.

Replacing the handle is not difficult. Any machine door consists of plastic rims that surround concave glass. The halves of the rims are attached to each other and to the machine itself using self-tapping screws and special latches. To make it more convenient to work with the machine, you need to remove the device door from its hinges.

After this, you should unscrew the screws that connect the parts of the rim to each other. Next, very carefully separate the halves of the rim from each other. The handle of the washing machine, which needs to be replaced, is attached to this half of this rim. And a tongue is attached to the handle that secures the door.

It is important to remember how the mechanism works so that later there are no problems with installing a new handle and assembling the washing machine. Therefore, write down the sequence of steps and when installing a new handle, do it in reverse order. After the faulty handle has been replaced and the machine is completely assembled, you can connect it to the network and check its operation. It is very important that the door of the device not only unlocks after the washing is completed, but also locks during the washing process.

A washing machine door blocking can also be caused by a simpler reason that will not require expensive repairs. This could be due to clothes getting caught in the lock. If this happens, you should not break the lock trying to get to the washed laundry. Open the top cover of the washing machine after turning off the power.

Locate the automatic door lock and use a screwdriver to remove the hook. If you are not sure that there is no water left in the machine, it is better not to tilt it too much or turn it over. If water gets on the electrical module of the device, it may burn out. In this case, repairs will be very expensive or will become unprofitable in principle.

Option to open the hatch:

• If there is water left in the machine, you need to turn on the drain and spin cycle. Once there is no water left in the drum, the system will automatically unlock the hatch.
• After turning off the electricity, you should continue the set mode and wait for it to complete. After this, the hatch will unlock.
• If you are trying to open the hatch, but the handle is not tight, but moves from side to side, then this indicates a breakdown of the lock. You should use the emergency opening.
• You can unplug the device from the outlet for 30-40 minutes. Usually after this time the car opens the hatch itself.
• Emergency reboot. A fairly simple option when you don't have time. You need to unplug the machine for a few minutes and then turn it back on. You must react in time. According to the plan, the car opens the hatch and then closes it. You need to hear the first click about opening, turn off the power to the device and open the door.
• Emergency opening. It is used if there is a malfunction in the board or the automation system is jammed.

All modern household washing appliances are equipped with automatic systems that block the hatch from accidental opening during washing. The reason that the door does not open after washing may be the late operation of the automation.

During washing, there was a power surge or the lights were turned off. You heard the machine stop and came to pick up the washed clothes. The hatch on the washing machine does not open because the washing process is not completed, and the automation blocks the door.

You need to check the power switch in the house or wait until the power supply is restored, then set the mode to continue or spin. The machine will continue to work, and after finishing you can calmly open the hatch.

Water left

One of the reasons why the washing machine door does not open may be that there is water left in the tank, so the machine is blocking the door. Look into the hatch: if there is water, then some kind of breakdown has occurred. It is necessary to eliminate it, drain the water, and the automation will unlock the door.

The handle is broken

This happens extremely rarely, but we are considering all options. If the handle breaks down, it will hang in a free position, and the lid of the laundry loading hatch of the washing machine will not open. In this case, the handle must be replaced.

The handle is in good condition, but the door won't open? The lock is faulty, you need to call a specialist.

Why doesn't the hatch open even though all washing modes are finished? As we have already said, there are quite a few answers to this question - there are objective reasons resulting from the failure of mechanical components or automation.

Most often, the door of the washing machine does not open due to breakdowns. It will not be possible to completely protect yourself from such cases, because... main components are subject to natural wear and tear. Failure of one part will block the hatch.

We suggest you read Clear a mattress from vomit

However, you can reduce the risk of breakdown as much as possible. To do this, it is important to follow the manufacturer’s basic recommendations, incl. regarding loading laundry and choosing detergents. It is equally important to regularly wash the internal parts of the device, check the filter and contact customer service for preventative maintenance.

How to drain water manually

Sometimes situations arise when for some reason it is not possible to drain the water using the program buttons, and it is not practical to start the spin cycle - for example, if a mobile phone gets into the machine, operating the machine in spin mode with this device inside can damage both devices.

It also happens that programs do not function due to automation failure or power outage. For these cases, all models provide the possibility of emergency draining, which can be done manually.

Drain pipe

On the front of any washing machine in the lower right corner there is a removable panel that hides the drain tube. In normal condition, this tube is equipped with a plug.

In order to drain the water manually, you need to remove the plug and lower the tube into a previously prepared container where the water will go. Sometimes the tube is missing, but the plug will be there in any case.

Drain hose

Every washing machine includes a drain hose. You can most often find it on the back of the unit, but sometimes manufacturers place it at the bottom.

Call the master

The easiest way to unlock the door is to contact a service company for help. The technician who comes upon request will not only open the door, but also, if necessary, can repair the breakdown.

You can find a specialist on the Internet by entering “Indesit washing machine repair” in the search query and indicating your city. The specialist will not only open the washing machine, but will also conduct diagnostics to determine what caused the problem.

The cost of the work depends on the complexity of the failure, the need for repairs and the company’s pricing policy.

For the capital, prices on average are:

• replacement of the hatch door lock – from 1,400 rubles;
• replacement of the hatch handle – 1,300 rubles;
• only opening the hatch without performing repair work - from 1,000 rubles.

Reasons for blocking

Locking the hatch is part of the principle of normal operation of the washing machine. It is necessary during operation so that the door is not accidentally opened by children or forgetful adults. In this way, manufacturers take care of our safety. At the end of the wash, after one to two minutes, the lock is activated and the door can be opened. For what reasons does the washing machine get blocked if the wash is finished and it is impossible to open the hatch?

• Electronics malfunction. It can occur due to an interruption in the supply of electricity or water, as well as during power surges in the network.
• Broken locking mechanism. In this case, it will need to be replaced.
• Drain filter clogged. The water does not drain completely, so the sensor prevents the hatch from being unlocked.
• The Child Lock function is accidentally turned on.

As you can see, there are few reasons. And in most cases, the problem is solved in a simple way. We will tell you what to do below.

Pause mode

If the machine has not yet managed to collect a large amount of water, then you can easily stop the process. Just pause it. All models have this option.

In order to temporarily stop the operation of the device, you need to press the start button or “Pause”, if available. But you shouldn’t hold it for long, otherwise you can cancel the operation completely. After a short time, the door will unlock and you can use it.

Experts in the maintenance of automatic washing machines warn: frequent use of this method provokes breakdown of the unit. Over time, the programs will begin to fail, and the machine will have to be sent in for repairs.

Unlocking a Bosch washing machine

The Bosch brand is well respected due to the quality and reliability of these household appliances. This brand has its own secrets for unlocking in various situations . If your model has plus and minus keys on the panel, then by pressing minus you can unlock the machine without wasting time and effort.

If the key is constantly on and does not allow you to turn on any mode, you need to return to the program during which the failure occurred, then press the delayed start button and hold your finger on it for 5 seconds. After this, the blocking will be disabled.

This is interesting! Bosch washing machines (Bosch): reviews

Fault prevention

There are not so many tips, but you need to follow them constantly:

1. Treat household appliances with care; close and open the hatch for loading laundry gently and without unnecessary force, so that you do not have to spend money on repairing the locking mechanism.
2. Never overload the machine, the automation has a strict program: it will not even allow you to close the door in this case.
3. Pay attention immediately to the occurrence of malfunctions: one will lead to a whole series of failures, and repairs may require more costs than replacing a small part.

If you follow these simple recommendations, household appliances will serve according to the assigned resource, without causing trouble or unnecessary problems.

How to unlock a washing machine

How to open the washing machine during washing? This need arises if, for example, you forgot to put something in the drum that urgently needs to be washed, or you forgot to take your keys or coins out of your pocket and they are now rattling inside the drum of the machine.

Try stopping the unit and wait a few minutes. If the machine door does not open, unplug it from the socket. Most models in this case will drain on their own, after which the hatch will open. If this does not work, turn the machine back on and set the drain program - the water should start draining immediately after selecting this mode.

If the reason for the unlocking failure is a clogged filter , water may remain in the drum and a special sensor will not allow the door to be opened. The problem is solved by cleaning the filter. Usually it is located at the very bottom of the washing machine and is closed with a special plug.

Was the filter clean? Screw the plug back in and try setting the rinse and spin cycle. If this does not help, unplug the power cord and turn it back on after 15 minutes. Zero result again? You will have to remove the plastic cover on top and try to open the locking device from the inside.

How to open a washing machine if it is locked by accidentally turning on the child lock function? Just hold down the start button for 5 seconds and the machine will unlock.

Emergency door opening

You can solve the problem yourself by turning off the power supply. An unlocking cable will help you open the washing machine in an emergency when it is embedded in the structure. Some models have emergency hatch opening.

With rope

If the machine is equipped with an emergency release cable, the problem is easily solved. It is necessary to mechanically open the door by pulling the rope. The cable is located on the lower right side of the machine near the drain filter. Open the small hatch and pull the emergency release rope. It has an orange or bright yellow color.

Select models of the following brands are equipped with an emergency rope:

• Ariston;
• LG;
• Bosch;
• Samsung.

Disconnecting from the network

The doors of washing equipment with a vertical hatch open automatically when disconnected from the electricity. In this case, dismantling actions are not required. To unlock the car, you need to disconnect the power cable from the network and turn it on again.

Turning off the power does not help unlock the hatch. This is provided by the design for operational safety. When the door is opened, hot water will pour out and the person will get burned. The temperature in the tank reaches 90.

Emergency hatch release

Emergency door opening depends on the design of the machine. Washing equipment can be unlocked if you reset the program. The next step is to press the option to spin and drain or drain without spin. After completing the task, the latch will work and the hatch will be unlocked.

Another way to open a locked door:

• Remove the top cover of the machine.
• Tilt it back a little so that the drum moves. This will give access to the latch.
• Open the door manually.

The passport of many models contains instructions on how to open the washing machine if it is locked. Often emergency work does not cause difficulties.