Beko washing machine - operating instructions

About the basic washing programs of Veko options

• 40'40° - a twofold reduction in washing time - 40 minutes, not 80, which is facilitated by additional revolutions of the Beko machine drum and a constant temperature of 40 degrees;
• Delicate washing mode – for items made of knitwear and viscose, implying smooth drum movements. The program protects the material from abrasion and the color from fading;
• for children's clothing, several washing and rinsing cycles are combined; the regime is also optimal for the things of those who suffer from allergic reactions;
• a special program for dark fabrics involves low temperature and low spin speed with a large volume of water to protect things from possible shedding; For maximum effect, it is recommended to use detergent products in liquid form;
• For cashmere and silk, the Beko machine has a hand wash cycle that uses less water. This blocks increased moisture absorption of fabric fibers and protects them from deformation and stretching;
• The mode for woolen products allows for the most gentle care for them, protecting them from pilling and matting;
• mode for goods with down and feather fillings - for options with a drum capacity of 9 kilograms or more. Along with washing things, feather mites and their metabolic products are eliminated;
• The Beko washing machine's self-cleaning program treats the hoses, drum and detergent trays at a temperature of 70 degrees, removing mold;
• The shirt washing mode helps in washing problem areas of products without damaging the material; drum speeds maintain balance at a temperature of no more than 40 degrees;
• fitness program - for processing sportswear made of cotton and synthetics at a temperature of 40 degrees;
• eco 20°C – for items made of cotton fabrics with slight dirt. Saves up to 80% of energy when compared to a standard cotton cycle, and liquid or gel laundry products are the optimal solution.

Self-diagnostic system database

Self-diagnosis helps to operate the VEKO washing machine competently and safely. The system regularly scans the device for possible problems and reports a malfunction via a digital display. The owner can only decipher the error code and fix the problem. The database is represented by a number of combinations.

• H1 – The temperature sensor is damaged. Repair involves testing the thermistor with a multimeter and measuring resistance.
• H2 – Fixing problems with the electric heater. Most likely, scale or voltage surges interfere with the operation of the heating element.
• H3 – Problems with the thermistor or failure in the control system. Accompanied by exceeding the set temperature and blinking of the first two lights.
• H4 – Problems with water pressure. The fill valve triac is probably faulty or the wiring is damaged.
• H5 – Draining is difficult. If there is a blockage, we clean the pump; if there are defects, we replace the pump.
• H6 – Short circuit of one of the triacs. There are several possible breakdowns: switch burnout due to current leakage, damage to the wiring of the unit, problems with the board or electric motor.
• H7 – Error in water intake. The reasons may be a faulty pressure switch, a broken UBL, a closed water tap, or a burnt-out control module.
• H11 – Stopped engine operation. A non-functioning tachogenerator, worn bearings, brushes, loose wiring or a burnt-out triac lead to a stop.

The signal sent by the system will allow you to narrow down the search for the trouble that has occurred. The main thing is to correctly decipher the code displayed on the display and fix the problem as soon as possible.

Beko washing machines: everything to save time

One of the most valuable resources in our life is time. Therefore, Beko washing machines have modes for quick and high-quality washing.

1. Mini - for cotton with a minimum of dirt at 30 degrees and 39 minutes for a full tank; The temperature regime is performed manually from 0 to 90 degrees, which may affect the duration of the process.
2. Mini 14´ - at temperatures from 0 to 30 degrees, the Beko washing machine will clean 2 kilograms of clothes in 14 minutes.
3. A refreshing wash cycle of 17 minutes is ideal for lightly soiled items to add freshness and eliminate odors;
4. Mix 40°C for every day - for options from various materials without sorting at 40 degrees.

The ratio of speed and quality is what active and business people value Veko products for!

Let's describe the main modes

The first question that concerns all housewives concerns the available modes. Knowing what preset programs are in the machine’s arsenal, it is easier to plan the wash and not spoil the laundry with high temperatures or excessive spinning. Getting to know the main buttons on the dashboard will help you avoid mistakes.

1. "40`40°". This mode offers to reduce the washing time by half and get clean laundry not in 80, but in 40 minutes. Speed ​​is achieved through increased speed and maintaining a temperature of 40 degrees throughout the entire cycle.

Important! The temperature range and spin force may vary on different VEKO models, so it won’t hurt to read the attached instructions first.

1. "Delicate wash". It is distinguished by smooth rotations, minimal spin, abundant water supply and low temperature, which allows you to protect easily spoiled knitwear and viscose from color fading and abrasion.
2. "Baby clothes". The name speaks for itself: this program is designed for washing clothes for children. Its use is also recommended for allergy sufferers. The secret is in several rinsing cycles.
3. "Dark fabrics" To maintain a rich black color, it is suggested to select a mode with a large volume of water and a low spin intensity. Another recommendation is to use liquid detergent for dark items.
4. "Handwash". For particularly delicate fabrics, such as silk and cashmere, it is better to choose the manual mode with a reduced amount of water. Thanks to the half-filled tank, there is no increased absorption, deformation or stretching.
5. "Wool". For woolen clothes, select the appropriate button, which allows you to carefully clean the fabric without forming pills.
6. "Pooh." Washing machines with a capacity of 9 kg or more offer special care for items filled with down and feathers. High-quality cleaning is achieved with the removal of feather mites and the remains of their vital activity.
7. "Shirts." The shirt shown on the panel is a program that washes problem areas without damaging the fabric or causing severe creasing. An ideal balance is maintained: minimal spin and low temperature within 30-40°.
8. "Fitness". Provides complete cleaning of sportswear made from cotton and synthetics. Wash for an hour at 40°.
9. "Eco 20°C". Designed for cotton fabrics with minimal soiling. Removes stains faster and saves up to 80% energy consumption compared to the standard Cotton mode. The powder in the form of a gel will enhance the cleansing effect.

Most models from VEKO also have a self-cleaning program. It lasts about two hours, during which a comprehensive treatment of the drum, hoses, garbage filter and dispensary takes place. The cycle takes place without laundry or detergents, and a high degree of purification is determined by heating the water to 70°.

Source

Veko washing machines: new times - new functions

In addition to generally accepted standards, new technologies have prompted Beko to develop new functions:

• mode to eliminate lint and pet hair by adding wash and rinse cycles;
• the necessary locking of the washing machine panels using special keys to avoid unexpected pressing, most often by children;
• aquafusion, which saves powder consumption by storing the latter in the drum of the Beko washing machine until the very end of the process;
• aquawave – electronic imbalance control for uniform placement of laundry in the tank;
• protection against power outages - automatic restart in case of power outages and resumption of washing at the interrupted place;
• a sensor to save from possible overflow, which reacts to exceeding the permissible water level in the tank of the Beko washing machine;
• half load mode – for a small amount of clothes. It is also important not to overdo it with the dosage of the detergent product;
• Silent tech™ technology – to reduce noise and spin during the washing process, reduce energy consumption and give a longer life cycle to the washing machine.

Thus, Veko washing machines are products that keep up with the times!

Descriptions and designations of Beko washing modes

By reading the operating instructions, you can find out in detail what a particular program means. But this is not always possible if the equipment was not purchased new or the instructions are lost. Therefore, in the table below we will look at the main modes and functions of the Beko machine.

Program table: main

Convenience and improving reliability are the secret to the success of Veko washing machines

The use of the Veko technique is very comfortable, thanks to several significant improvements:

• LCD display displaying water temperature, spin speed, cycle stage, remaining time until the end of the process, and other indicators;
• Volume hatch for loading, including large items - blankets and jackets;
• Expanded drum volume even with the miniature size of the Beko washing machine: with a depth of 35 cm - 5 kg. clothes, 40-45 cm - 6 and 7 kg., and with the standard - 8-9 kg.;
• A special tray for liquid laundry products, for use even with a delayed start;
• High-tech heating elements with revolutionary nickel protection, which reduces scaling and protects against corrosion processes.

Veko washing machines are thought out with precision down to the smallest detail!

Veko washing machines: deciphering error codes

Not every Veko washing machine has an error display; For some, one or another indicator lights up:

1. H1 – faulty washing machine temperature sensor due to oxidation or damage to its contacts. To troubleshoot problems, test the thermistor wiring and measure the resistance. If information is displayed that differs greatly from the standard, the sensor must be replaced.
2. H2 - display when a tubular electric heater malfunctions - the use of low-quality water with a considerable number of impurities that form scale on the heating element or drops in electrical voltage in the network.
3. H3 – the heating element of the Beko washing machine remains in working condition and the set temperature is exceeded with the first and second indicator lights constantly burning. Problems with the temperature sensor or a control unit error cannot be ruled out.
4. H4 – malfunction of the fill valve triac with the first and third indicators visible. Wiring condition monitoring is required; diagnosis of the latter is recommended.
5. H5 – problems with the drain pump, as evidenced by the second and third lights being on. The pump is cleaned if clogged, or replaced if there are significant defects.
6. H6 – closure of the triac with notification by the first three indicators. Apparently there was a short circuit in a section of the triac, then it is replaced. The integrity of the wiring of the unit elements, the control module and the electric motor of the Beko washing machine are also monitored; if necessary, the components are repaired or replaced.
7. H7 – problems with the controller related to the liquid level with the first three indicators lighting up. Possible reasons are electrical locking of the hatch doors, a malfunction of the pressure switch or module, or simply a closed valve.
8. H11 – problems with the motor circuit of the Beko machine. In this case, it is important to evaluate the condition of the tachogenerator, bearings, brushes or wiring. If all the mentioned actions do not lead to results, then testing the triac is necessary.

The error codes described above will help you independently identify breakdowns and eliminate their causes.

Machine equipment

Using the Beko technique has become even more convenient due to several improvements. Among the first innovations is an LSD display that allows you to monitor temperature, spin speed, remaining time and many other indicators. The expanded volume of the hatch, combined with the overall compactness of the machine, also makes washing more comfortable. For example, with a depth of 35 cm, a load of 5 kg of laundry is expected, and with a depth of 45 cm – up to 7 kg. The powder receptacle has also been improved, with a special compartment for pouring liquid detergents.

It is impossible not to mention Hi-Tech heating elements with a revolutionary nickel coating. Compared to old-style heaters, it has many advantages. These include increased service life, smooth surface, accelerated heating, resistance to scale and corrosion.

Choose the right mode

Each Beko model comes with detailed instructions in which you will read how to set the desired mode and how to set up your own program - with the settings you need. The user can select a ready-made sequence of actions with automatically specified conditions - temperature, washing time, etc., or can make adjustments. Taking any mode as a base, you can add the options the user needs.

Beko machines have a selector switch that selects the washing option. The temperature is set by turning another switch. The total cycle time will be the sum of the duration of all processes that are included in it.

Before installing options, be sure to look at the labels that come with almost every item - from T-shirts and panties to down jackets. There are icons on the labels that can be deciphered using special tables - if the graphics are not clear.

The correct choice of programs will keep your things intact and ensure they are washed with high quality. By choosing the optimal settings, you also save all types of resources used when washing in SMA.

The Beko company is one of the most developed and popular Turkish “brainchildren”. The main characteristics of Beko products are considered to be intuitive management, functional design and uncomplicated operation. However, the question of how to use a Beko washing machine requires clarification.

What other useful features does the Beko SMA have?

Manufacturers are constantly improving washing machines, giving them new functions. Thanks to new developments, Beko machines have acquired the following capabilities:

Basic modes

Pictures take up less space, they are more impressive and are more suitable for the modern design of automatic washing machines (WMA). But their understanding is often difficult: not everyone will guess the first time what this or that picture means—instructions are used to decipher it. And most importantly, hand-drawn symbols are not standardized - each manufacturer is free to create them at his own discretion.

The Beko washing machine may not look so impressive because of the inscriptions, but they make operation as comfortable as possible. But the inscription is not a carrier of all the information - the names of the modes do not indicate either temperature or speed. Before you turn on programs, you should read their descriptions to know what they are suitable for.