Holofiber filling: can it be washed and how to do it correctly?

Thanks to its excellent heat-saving properties, softness and lightness, holofiber is used to fill outerwear - down jackets, jackets, coats.

Products made with this synthetic material are in great demand among buyers today.

But what happens to it after washing? Do things lose their original appearance after contact with water and detergents, and how to wash them correctly?

How to properly wash a holofiber jacket in a washing machine? We will answer these questions in this article.

Advantages and disadvantages

This material has several advantages over the usual down, feathers and padding polyester:

Thanks to its springy texture, it holds its shape well.
The air between the fibers has good thermal insulation properties, so clothing with holofiber is preferable in cold weather.
This synthetic material is suitable for allergy sufferers and asthmatics because it is hypoallergenic.
There are no mites in holofiber, because there is nothing for them to feed on in artificial material.
Glued fibers do not allow or absorb moisture.

But it has few disadvantages:

A relative disadvantage is that this insulation is quite hot and is not suitable for everyone.
Frequent washing with the wrong cycle means that the product may lose its shape and properties.

For these reasons, holofiber is very easy to care for. However, in order to extend the life of the product, you still need to know a few rules.

What is this?

The artificial material has the appearance of a hollow spiral fiber, each of which is a kind of spiral spring.

This material recovers well after grinding and retains its shape for a long period of time. The compressive structure of the fiber is soft, it is “breathable”, that is, there is air permeability.

It is made in the form of balls, sheets and webs in rolls. Holofiber is used in construction, space and aviation industries.

This material is also used for clothing, mattresses and blankets, as well as filling for pillows and toys.

Holofiber is an environmentally friendly and hypoallergenic material. Mites do not live in this material, so it can be considered hygienic.

This type of filler has become an excellent substitute for synthetic winterizer. It is much better, and things from it sell out faster.

All items made from innovative holofiber material can be washed as often as necessary.

General rules

If it is heavily soiled, the holofiber should be soaked and allowed to rest. This will not harm the filler in any way. The product can even be rubbed with a brush.
If you find a stain on your favorite jacket, you can safely fill it with stain remover and give it time to remove. The filler will not be harmed by this.
If, after washing, a product filled with holofiber is not thoroughly rinsed, unpleasant surprises may appear on the fabric in the form of detergent stains when it rains. This occurs due to the fibrous structure of the material.
Holofiber can be wrung out even in a washing machine at 1000 rpm. You can dry clothes with this filler without pre-squeezing, water is not absorbed into this material, and it dries extremely quickly.
Sometimes it becomes necessary to iron a thing with this artificial filler. This can be done at an iron temperature of no more than 100 degrees, but it is better to use a steamer or an iron with a steam generator function.
To ensure that the filler does not roll off during washing, you can use special polyvinyl chloride balls. They will not only prevent the holofiber from becoming crumpled, but will also increase the quality of washing, while reducing its duration.

How to choose a clothes dryer for your home

How to wash by hand?

When washing by hand, the most important thing is to rinse the holofiber detergent well. This is necessary to prevent the formation of soap stains on the fabric after it dries.

To ensure high-quality removal of dirt and detergents, it is recommended to wash the jacket in a large container, such as a bathtub.

The washing process is performed in the following order:

Fill the bath with warm water (approximately 30-35 ͦC).
Dissolve washing powder in water.
The more dirty the item is, the more powder you will need. Manufacturers of washing powders always indicate on the packaging how much detergent needs to be added to a certain amount of water.
Then you should immerse the jacket in a bath of soapy water until it is completely saturated with water.
After 20-30 minutes you can start washing the product. This can be done with a brush or regular sponge.
Next, you need to rinse the jacket at least 2-3 times in clean water, gently wring it out with your hands and shake it lightly.

When washing clothes made of membrane fabric, you should use a powder specifically designed for such fabrics. It is recommended to wash items made from raincoat fabric, bologna and polyester with delicate washing powder. In this case, it is advisable to use the drug in the form of a gel.

If there is a stubborn stain on the jacket that cannot be removed with other detergents, you can use a high-quality stain remover.

However, you should first read the information on the tag and make sure that this product can be cleaned with a stain remover. Otherwise, it is better to use a dry cleaning service to remove the stain .

What determines the washing method?

The upper fabric does not always allow you to worry-free wash a product with artificial filling. Therefore, it is best to take into account the material when washing and rely on the label with the manufacturer’s information.

The raincoat can be washed in a machine at a temperature not exceeding 45 degrees. But it’s better to turn off the spin function so as not to deform the fabric.

The membrane is considered a capricious material, so it is better to clean it in a delicate wash mode and using special detergents for the membrane. As a last resort, you should wash it with any shampoo, but never with powder, which can clog into the pores of the fabric and negate all its functions.

Polyester is less capricious, but also requires special treatment. It can be washed at a temperature not exceeding 40 degrees and cannot be ironed.

Bolon is not washed or dried in a washing machine because creases easily appear on this fabric. Clothes made from this material must first be soaked in detergent and then carefully rinsed in the shower so that the powder or gel does not leave streaks on the fabric. You can’t squeeze it out, you need to let the water drain. With such a gentle wash, neither the bologna on the outside nor the holofiber inside the jacket will be harmed in any way.

Drying things with holofiber

An important advantage of products made from holofiber is the ability to dry them in a dryer, minimizing the occurrence of unwanted mites.

Drying pillows

Washed pillows must be dried. Place them in the dryer, set to medium or lower heat. High temperatures can damage artificial fibers. To fluff up the filling, place 2 tennis balls in a clean white sock and place them in the dryer along with the pillows.

Important! After the drying cycle is complete, check the moisture content. If items are not completely dry, repeat the drying process.

Drying the membrane jacket

Membrane clothing is waterproof, so the “classic” twisting and spinning in a machine is not practical. After washing, you need to squeeze it lightly to remove excess water. Do not use hand twisting as this may damage the membrane. The membrane can be dried in a dryer at low temperature or in air (not in the sun).

What and how to wash bedding

Manufacturers of bedding unanimously insist that blankets and pillows filled with holofiber can be washed in a washing machine. However, experienced housewives claim that this is just a marketing ploy and when washing bed linen you will definitely have to work hard on your own. Typically, these items are wet cleaned no more than once a year. To avoid having to go to the store for a new blanket after cleaning, it is important to know a few rules.

Pillows and blankets filled with holofiber are first soaked for half an hour in lukewarm water.
It is better to give preference to liquid detergents because, unlike powder, they do not get stuck in the structure of the fabric and are easily washed out of it. If buying a special shampoo for washing seems wasteful, then even the most ordinary one - for the head - will do.
When washing, it is better not to rub the pillow, but to lightly press and straighten it.
It is very important to rinse the product thoroughly.
It makes sense to plan washing clothes with holofiber for the summer in order to dry the item well in the wind and sun. First, the pillows are dried in a basin to drain most of the water, and then placed in an open space until completely dry. During the drying process, you need to shake the pillow several times so that the filling dries faster and does not cake.
If, despite all the advice, you cannot wash bedding by hand, then you can rely on a machine. The main thing is not to forget to select the delicate wash mode.

6 mistakes when washing in a washing machine

Proper drying and ironing

The washed and wrung out item can be hung to dry on a trempel, or in the usual way, on a clothesline.

Using a radiator or electric radiator for drying is strictly prohibited , as this can lead to damage to clothing.

It is better to dry down jackets and jackets made of membrane fabric by laying them out on a special clothes dryer - this will prevent deformation of the product.

The room in which the item is dried must be well ventilated . Otherwise, it may acquire an unpleasant odor, which will require repeated washing to eliminate.

If clothes after washing look very wrinkled and require ironing, you should carefully iron them with an iron, turning on the steam mode. The choice of ironing temperature depends on the material from which the jacket is made.

Washing cannot be dry cleaned

Some housewives are so afraid of ruining their favorite item that they prefer not to save the family budget and take it to dry cleaning. In the case of holofiber, this is absolutely unjustified, because in order to thoroughly clean this material, you can even wash it by removing the filler from the product. Unlike fluff, it is completely non-volatile and will not cause trouble if it is scattered throughout the apartment.

In this form, this filler can be easily washed in a washing machine at any temperature. According to its characteristics, it can even withstand boiling, but there is no need for this - synthetics do not harbor any foreign residents in the form of ticks and other insects.

If the holofiber in your favorite jacket or comfortable pillow turns out to be of low quality and still becomes matted, it can be resuscitated. To do this, take a regular animal hair comb and carefully comb the fibers. It will be difficult to return to its former fluffiness, but you won’t have to immediately throw away your favorite item.

General recommendations before washing

Let's figure out how to wash holofiber so as not to damage its structure and not spoil the appearance of the product. Choose hand or machine wash as desired. Keep the temperature range between 45-90°. Remember that some manufacturers recommend choosing a temperature up to 60°, so it’s better to stay in the middle.

Is it possible to wash holofiber using stain removers and conditioners? Yes, but only if they do not contain chlorine. Soak tough stains for 1-2 hours. This will not harm the material. Use a regular brush and laundry soap to remove any remaining traces of dirt. Rinse the item thoroughly to avoid streaks and stains in wet weather. Iron at temperatures up to 100° or use a steamer.

How to extend the life of a product?

Frequent intensive washing affects the service life of the product. Too aggressive a washing machine mode can render the item unusable after a couple of years. Hand washing will allow you to enjoy the warmth of modern filling longer, but if it is incorrect, then after 5 years you will still have to go to the store for a new blanket.

In order for the product to serve the entire period of time promised by the manufacturers, which is at least one decade, it must be carefully looked after. Whenever possible, ventilate in the sun and let the wind blow through. The little tricks in this article will help you maintain the quality of hollafiber, enjoy its warmth and save on a new purchase.

Caring for holofiber pillows

The material does not absorb moisture and unpleasant odors, and there are no conditions for the appearance of bacteria. The artificial filling of the pillow allows air to pass through perfectly, so even with high humidity, fungus or mold does not appear in it.

Accordingly, holofiber does not require frequent washing. It is enough to clean the product from dirt once a year. And in the period between washings, the pillow can be ventilated in the fresh air.

Expert opinion

Irina. Housewife.

Ask a Question

If stains appear on the non-removable cover, you can do local washing with a soap solution.

Even with a delicate wash cycle, the filler may become crumpled. A more gentle care option is home manual or professional dry cleaning.

You can check the quality of holofiber yourself. To do this, place a heavy object in the center of the pillow and leave it for a while. If after this the product does not take its original volumetric shape, the filler is of poor quality or is already old. Washing such a pillow in an automatic machine can completely ruin its appearance.

Too frequent or aggressive washing will render the filler unusable. The pillow will no longer support the cervical spine and will ruin the quality of sleep.

Holofiber bedding does not tolerate ironing. High temperatures can cause the filler to melt and flatten. Careful washing and regular airing will preserve the quality of the product for several years.

Polyester and raincoat jackets

Let’s try to figure out what washing parameters are suitable for holofiber outerwear made from different fabrics. So, polyester jackets are completely unpretentious. They are not prone to loss of shape, color, shine, dry quickly and are quite resistant to dirt. However, the heating temperature of the water when washing such items should not exceed 40°C.

Polyester items should be washed using gel formulations for delicate fabrics. The use of any bleaches is strictly prohibited; stains and stains will remain on the material.

Raincoat jackets do not allow moisture to pass through and have excellent breathability. The products retain heat well and do not lose shape or color even after repeated washing. The water temperature when cleaning such outerwear should not exceed 45°C.

When washing raincoat fabric, do not use an intense spin cycle. This threatens the formation of creases in the material, which are quite difficult to straighten. It is also strictly prohibited to use bleaches and other aggressive household chemicals.

How to return holofiber to its original shape

Hollofiber is a resistant material, but its fibers lose their elasticity due to frequent washing. If the filler has become deformed, the following methods will help restore it to its previous volume:

The jacket needs to be washed in a washing machine with large tennis balls.

The pillow or blanket should be cut out, the filling taken out, fluffed with your hands or combed with a large brush, then put back and sewn up.

On a note! If it is not possible to return the holofiber to its lost shape, it can be easily replaced with a new one, which is sold in almost every handicraft store.

How to straighten the filling in a jacket after washing

It happens that when washing, holofiber gets knocked down and forms lumps in one or several places. This can happen due to improper care in the past, due to the effects of time, or due to careless storage in dirty conditions. Don't despair, the product can still be saved. There are several effective tips for this:

Wash again. If trouble does happen, wash the item again. But now add three or four tennis balls to the drum of the machine. In the process of unwinding, they will hit the product and break the crumpled areas of the filler.
Straighten. During drying, the holofiber can be periodically unraveled and crushed with your hands, evenly distributed under the lining.
Knock out. A slightly damp item should be hung on a hanger and fastened with all buttons and zippers. Using a regular carpet beater, lightly pat the clothes and shake them so that the filling fluffs up.
Vacuuming. An unconventional method that is used on a damp item. We lay out the jacket horizontally and, using the air flow from a vacuum cleaner, carefully straighten the contents.
Extreme recovery. When the above actions did not lead to a positive result, the time has come for drastic decisions. You need to carefully tear off the lining and sort out the loose areas with your hands.

Where to buy holofiber?

Holofiber filler is used not only for outerwear, but in handicrafts for stuffing toys; pillows, blankets, decorative elements for a crib, etc. are made from it. Therefore, many needlewomen are interested in the important question: where is it profitable to buy holofiber?

Here is a list of the main places:

any handicraft store, in big cities it’s Leonardo or Igolochka
Wildberries, Ozone and other online stores, as a rule the prices there are better than in specialized ones
Aliexpress! This is an unexpected place; we recently discovered it. Aliexpress has a lot of craft supplies. You can also buy holofiber filler there
Ikea, in the discount department, sells pillows tightly stuffed with holofiber for 30-40-50 rubles.

Holofiber is an excellent modern synthetic filler with a lot of advantages and a minimum set of disadvantages.