Error codes for Vestel washing machines

Indispensable assistance in restoring the functionality of large equipment is provided by the built-in self-diagnosis function, which allows you to correctly interpret the error code of the Vestel washing machine that appears on the built-in display into the required sequence of actions to eliminate the malfunction. The functionality provided by the electronics manufacturer ensures quick identification of a failed machine module, which speeds up the process of repairing washing machines - the technician who arrives on call will prepare in advance to eliminate the breakdown, taking with him the necessary tools and spare parts. Depending on the SM model, the error code on Vestel is displayed by indicating the code on the display integrated in the case, or by alternate blinking of the LEDs located on the front panel. Correct interpretation of such signals helps to correctly determine the cause of the malfunction and quickly repair the machine.

Vestel washing machine: error codes

The self-diagnosis system built into the washer control is triggered when the device malfunctions. It records the type of problem and then reports it to the user in the form of a code on the display. If there is no screen, then the fault is indicated by blinking lights on the panel.

If the SMA displays an error for the first time, a system failure must be ruled out. This happens when there is a sudden power outage. So reset the errors:

• Unplug the machine for 15–20 minutes.
• Connect again.
• Look at the display.

Has the code disappeared? This means you can continue to use the equipment. But if the symbols are repeated, below you will find out what they mean.

Users of the Vestel washing machine also note the following problems:

• The device does not turn on, the indicators on the panel do not light up. The problem is with the power cable, plug or socket. The power filter may have burnt out.
• The body of the SMA vibrates strongly during the spin cycle and is noisy. A foreign object is stuck between the tank and the drum. In rare cases, bearings wear out.
• Leaking through the detergent dispenser. Occurs when the dispenser is clogged with powder deposits or increased pressure in the line.

Blockages are the scourge of all washing machines. After the end of the cycle, clean the powder tray and leave the hatch door open. This will help avoid leaks, mold and mildew. Before starting repairs, unplug the equipment and turn off the water supply.

The powder and rinse aid remain in the container of the Vestel machine

An equally common problem with Vestel washing machines is washing clothes without powder. Result: dirty laundry and wet, unused powder in the cuvette. The Vestel powder receiver stops dispensing powder due to the valve for filling the tank with water.

The essence of the breakdown is as follows: you start washing, the controller commands the valve to fill with water. If everything is in order, the valve opens and water flows into the tank, then the valve closes and the wash starts.

If the valve is defective or breaks during operation of the machine, then it usually opens, but not to its full potential. After observing the machine, you may notice that the water enters the tank more slowly and with weak pressure, almost without capturing the container with detergent. As a result: the powder is in place, the washing quality is C-grade.

There is no point in repairing a defective valve - it is better to replace it with a new one. How this process happens:

1. Buy a new valve that fits your SMA model (Vestel Aura, Vestel Bora, etc.).
2. Disconnect the washing machine from all systems: electricity and water supply, sewer pipes. Remove the machine from the niche if it is built-in.
3. Unscrew the bolts that secure the CM top cover and remove it.
4. Under the cover, where the water intake hose is connected, you will find a small fill valve (usually made of plastic) waiting for you.
5. Remove the wires coming from the sensor.
6. Unscrew the fasteners that hold the valve in place and remove it.
7. Take the new unit and install it according to the same principle as when you removed it: tighten the bolts, connect the wiring, close the lid and run a test wash at idle speed - without laundry.

Let us add that Turkish-made SMs cannot stand on a par with higher-quality models, but their advantage is that many breakdowns can be repaired without a technician - with your own hands. All you need: comprehensive information about repairs, minimal tools and some free time.

Error codes for Vestel washing machines (Vestel)

+ indicator is on – indicator is off

The presented table with error codes for Vestel contains detailed instructions for troubleshooting in each specific case - the owner of the electronic assistant can often solve the problem without outside help. Most malfunctions are caused by improper operation of the washing machine; repair in this case takes a few minutes. The culprits are often foreign objects falling into the filter, for example, loose change or keys falling out of pockets, and problems with the water supply system - the lack of water pressure in the tap that meets the established requirements provokes the activation of the CM protection system.

Remember that in most situations, the “Operation Manual” supplied with household appliances helps to cope with troubles, where manufacturers describe in detail all the likely problems that consumers encounter. Strict adherence to the instructions in the manual helps to extend the life of the equipment, and calling a technician to repair a washing machine at home is an infrequent occurrence. However, if a serious malfunction has occurred that has led to the complete inoperability of the equipment, it would be best to contact professional repairmen who are ready to arrive at the specified address in a matter of hours and promptly return the family’s irreplaceable home assistant to service.

The Stir-Repair Service Center, which serves consumers in the Moscow region and Moscow, will help you cope with the troubles - repairing a Vestel washing machine with an error code will require a minimum of time and money. When filling out an application to call a specialist, be sure to indicate the model of the vehicle and the external manifestations of the problem. First of all, the error code corresponding to the data in the table published above. Understanding what the technician will have to deal with upon arrival at the address will help reduce the time it takes to clarify the situation, and if important elements of electronic equipment fail, it will eliminate the need to go back to get the necessary part. The Service Center employee will take with him in advance the components and spare parts that will be required for repair work, so you should report the code displayed on the indicator in advance.

Applications are accepted in three ways:

• by phone in Moscow;
• by email;
• through the online application form on the website.

Entrust your SM to professionals who are ready to repair your Vestel machine both at home and in service center workshops. In the latter case, we undertake the transportation of broken equipment!

What to do if a code appears on the display

When code E01 is shown , this means that the drum door was not closed tightly enough. This signal is duplicated by the blinking of the first and second light indicators. If this happens, simply close the door more tightly. After this, you will need to restart the wash.

It is possible that even with the lid tightly closed, the same error signal is generated. This indicates that the device that locks the hatch is faulty. In this case, it must be replaced. You can do this yourself.

If the water pressure is too weak, the washing machine cannot draw enough water. In such a situation , code E02 will appear on the display , and the first and third indicators will flash.

In this case, first of all, you need to make sure that the water supply tap is open. Another likely cause of the problem is a possible clogged fill valve. In this case, you need to check its mesh and, if there is debris, clean it. To do this you need to do the following:

Another possible reason is a faulty pressure switch. In this case, you need to open the top cover and find the water level sensor. Need to check:

If necessary, this sensor must be replaced.

Signal E03 indicates a pump malfunction. In this case, it could break or become clogged. The error message is duplicated by the blinking of the first and fourth indicators.

In this case, repairs should begin with cleaning the drain filter. You need to look for it at the bottom of the unit. You need to unscrew it counterclockwise. It must be washed under a strong stream of water. After it is cleaned of dirt, you will need to screw it back.

In some cases, cleaning will not help. This happens if the pump’s operation is not heard and the water still remains in the drum. In this case, it became necessary to replace the pump.

Replacement is done through the bottom of the washing machine. This does not pose any difficulties.

When the display shows code E04 , it means that there is too much water in the tank. The same signal is given by the indicators if the second and third of them blink.

The most common cause of this problem is a clogged filling valve. In this case it needs to be replaced. The valve can be immediately seen if you remove the back wall of the machine. It is located at the connection point of the hose through which water enters the machine. Before carrying out work, you must turn off the water supply.

If the reason lies in the heating element, then it can be easily replaced by opening the service hatch. To remove this element, simply unscrew the fastening bolt, after which you need to disconnect the electrical wires.

The electric motor rarely breaks down. At the same time, carbon brushes most often deteriorate in it. Although it is possible to replace them yourself, it is better to contact a specialist in such a situation with a problem. He will find the cause of the breakdown and perform the necessary repairs. For example, if it happens that the motor windings burn out, then in this case the motor must be replaced.

Error code E05 indicates that the temperature sensor or heating element is faulty. The signal is duplicated by blinking of the second and fourth indicators. If this error occurs, it is recommended to contact service for repair.

With error E06, the electric motor is faulty. In this case, the indicators give a signal by flashing the third and fourth of them. Such a breakdown cannot be repaired independently.

The electronic module is the control center of the washing machine.
Its failure is associated with a malfunction of electronic circuits. It is impossible to fix such a breakdown on your own. This should be done by a specialist. Such a breakdown is indicated by code E07 (three lights flash at once - the first, second and third).
Code E08 indicates that there has been a failure in the electrical network. At the same time, the second, third and fourth lights flash. Although this problem is not directly related to the washing machine, it can cause it to malfunction. In this case, it is better to disconnect from the network for a while and continue working if the network is stable.

The display will show code E09 if the mains voltage deviates from the normal level. Within certain limits, the washing machine can work normally, but this increases the risk of possible breakdown. The signal is duplicated by blinking of the first, second and fourth indicators.

If a violation has occurred in the communication system of the washing machine, it is recommended to perform a diagnostic reboot lasting approximately twenty minutes. If the same code is displayed as a result, this indicates the need to contact a service center for repair. The failure code in this case will be E10 . The indicators will duplicate this signal by blinking the first, third and fourth lights.

Errors E01 E10

If the washing machine stops working, this means that there is a specific reason that led to the breakdown.
In this case, the display will show the error code that has occurred. Depending on what actually happened, you can either fix the problem yourself, or you will have to contact a service workshop. It should be taken into account that some fairly old models of this brand do not have a display. In this case, indication of a breakdown also occurs and is expressed in the blinking of certain indicators.

Service area

Service is constantly expanding the geography of its activities. The company offers on-site repair services for washing machines, dryers, dishwashers, refrigerators, ovens and electric stoves in Moscow, the Moscow region, New Moscow, Odintsovo, Elektrostal, Troitsk, Domodedovo, Dmitrov.

• After our technicians, your household appliances will delight their owners with impeccable performance for a long time to come.
• Contact us and we will do our best to restore your unit as quickly as possible.
• The client is satisfied - “Stir-Repair” is calm.

CJSC CZAO CAO SVAO VAO Central Administrative District South-Eastern Administrative District South-Western Administrative District South-Western Administrative District

Basic faults

The fault is displayed on the display. Troubleshooting can be done independently or after calling a specialist. The complexity of the breakdown or malfunction is encrypted in the code number.

E01 - E09

The machine does not turn on. Wherein:

1. the operating program can be selected, additional options are operational.

The error or breakdown lies in the malfunction of the hatch lock. The solution to this problem is to close the car hatch tightly. If the lock fails, it must be replaced. If the lock is working properly, then the electronic module is faulty. To determine its serviceability, you need to check the electricity supply to the lock at the beginning of the wash. If the electronic module fails, it must be replaced with a new one.

E03 - E06

The machine does not complete the cycle. Wherein:

1. The laundry does not spin, the water does not drain.

The problem is the inability to remove dirty water from the drum. The machine cannot drain, rinse or spin the laundry. First of all, you need to check whether the hoses are pinched and whether there is a blockage in the drain filter. The next step is to check the performance of the drain pump. If it malfunctions, the pump is replaced with a similar one.

Vestel wm 834 t stops washing at any stage

CMA Vestel AWM 834 error E03 CMA Vestel AWM 834 SN: 00001724530341270096. After selecting the program when you click on Start.

SMA Vestel AWM 834 S, Looking for a module diagram. Have a nice time everyone. Can someone tell me the direction of searching for the circuit diagram of the sma module, or.

SMA Vestel AWM 834 S / UM0832CA3, turns on, but does not start (bl) Good health to all. Today on the road I discovered a breakdown on the UBL connector. It evaporated on the module.

SMA FINLUX (Vestel) 1040LCD, pause at the end of the wash Washing machine Vestel Brand FINLUX Model 1040LCD Brought with a complaint - it doesn’t drain. No diagnosis.

I checked the heating element according to the instructions, everything is clear, it doesn’t break anywhere, is this even possible? I checked both the heater body and the machine body. I will change it, but what if the symptoms remain? Should I change the heating element together with the thermister or just the heating element?

Upd. I reset the memory card - no effect. the reset occurs, but errors remain many times

I order tests, coursework, dissertations and any other student work here.

SMA Vestel wm3260, the engine jerks in the washing mode. I came across this miracle machine here for repairs. The client announced over the phone that the machine does not spin when washing, it spins.

VESTEL ARWM 1040 L end message at the beginning of the wash Hello, when you start the wash, water fills, after which the end message and water appear.

CMA VESTEL ARWM1040L, during washing, END appears on the display. The Vestel arwm100l washing machine can wash an hour-long program from start to finish, or maybe after 30;15;5.

SMA Bosch E-nr WLF20170CE/21, random stop during the washing process Good day! Tell me, SMA can work in the process of work, and most times in the mode.

What to do if a code appears on the display

When code E01 is shown , this means that the drum door was not closed tightly enough. This signal is duplicated by the blinking of the first and second light indicators. If this happens, simply close the door more tightly. After this, you will need to restart the wash.

It is possible that even with the lid tightly closed, the same error signal is generated. This indicates that the device that locks the hatch is faulty. In this case, it must be replaced. You can do this yourself.

If the water pressure is too weak, the washing machine cannot draw enough water. In such a situation , code E02 will appear on the display , and the first and third indicators will flash.

In this case, first of all, you need to make sure that the water supply tap is open. Another likely cause of the problem is a possible clogged fill valve. In this case, you need to check its mesh and, if there is debris, clean it. To do this you need to do the following:

Another possible reason is a faulty pressure switch. In this case, you need to open the top cover and find the water level sensor. Need to check:

If necessary, this sensor must be replaced.

Signal E03 indicates a pump malfunction. In this case, it could break or become clogged. The error message is duplicated by the blinking of the first and fourth indicators.

In this case, repairs should begin with cleaning the drain filter. You need to look for it at the bottom of the unit. You need to unscrew it counterclockwise. It must be washed under a strong stream of water. After it is cleaned of dirt, you will need to screw it back.

Replacement is done through the bottom of the washing machine. This does not pose any difficulties.

When the display shows code E04 , it means that there is too much water in the tank. The same signal is given by the indicators if the second and third of them blink.

The most common cause of this problem is a clogged filling valve. In this case it needs to be replaced. The valve can be immediately seen if you remove the back wall of the machine. It is located at the connection point of the hose through which water enters the machine. Before carrying out work, you must turn off the water supply.

If the reason lies in the heating element, then it can be easily replaced by opening the service hatch. To remove this element, simply unscrew the fastening bolt, after which you need to disconnect the electrical wires.

The electric motor rarely breaks down. At the same time, carbon brushes most often deteriorate in it. Although it is possible to replace them yourself, it is better to contact a specialist in such a situation with a problem. He will find the cause of the breakdown and perform the necessary repairs. For example, if it happens that the motor windings burn out, then in this case the motor must be replaced.

Error code E05 indicates that the temperature sensor or heating element is faulty. The signal is duplicated by blinking of the second and fourth indicators. If this error occurs, it is recommended to contact service for repair.

With error E06, the electric motor is faulty. In this case, the indicators give a signal by flashing the third and fourth of them. Such a breakdown cannot be repaired independently.

Code E08 indicates that there has been a failure in the electrical network. At the same time, the second, third and fourth lights flash. Although this problem is not directly related to the washing machine, it can cause it to malfunction. In this case, it is better to disconnect from the network for a while and continue working if the network is stable.

The display will show code E09 if the mains voltage deviates from the normal level. Within certain limits, the washing machine can work normally, but this increases the risk of possible breakdown. The signal is duplicated by blinking of the first, second and fourth indicators.

If a violation has occurred in the communication system of the washing machine, it is recommended to perform a diagnostic reboot lasting approximately twenty minutes. If the same code is displayed as a result, this indicates the need to contact a service center for repair. The failure code in this case will be E10 . The indicators will duplicate this signal by blinking the first, third and fourth lights.

Checking UBL

If the machine gives an error, but everything is in order with the mechanics of the locking device, it is better to check the UBL. For this you will need a multimeter. The tester switches to resistance measurement mode. It’s easy to access UBL on Vestel machines:

Place one multimeter probe against the neutral contact, the second against the phase. If a three-digit number is displayed on the screen, then everything is fine. Afterwards, attach the first probe of the tester to the neutral contact, the second to the common one. The device is faulty if the multimeter shows 1 or 0.

It happens that the tester did not detect a breakdown, but blocking does not occur. It is necessary to inspect the lock directly; the reason probably lies in a worn-out bimetallic element. The part cannot be repaired; you must purchase a new UBL to replace it.

Source

Inspect and repair the door latch

If you couldn’t fix the washing machine, you need to look for another reason. The door latch often becomes inoperative. The lever that fits into the hole develops nicks. Fixing the defect is easy. If the latch is removable, you need to remove it. When removing the element is impossible, you have to work with the door as a whole.

The notches on the lever are sharpened with a file. Afterwards the surface is treated with graphite lubricant. Excess composition should be removed from the lever to prevent damage to the laundry during the washing process. After manipulation, the latch (or the entire door) is placed in its original place. In some cases, the springs or the lock hook are damaged. To fix the damage, parts will need to be replaced.

The meaning of the cipher and initial actions

What should I do to get the machine back into operation? First you need to understand what kind of malfunction you will have to deal with. Error code E01 informs that the drum door of the Vestel washing machine is not tightly closed. Reasons that can lead to system leakage:

If the washer gives an error, proceed as follows. When starting the washing mode (even before the fault code appears), press down the drum door with your knee.

If the hatch is blocked, then everything is in order with the UBL, and the reason should be sought in the door mechanics.

Often the error code occurs precisely because the door hinges are misaligned. If no defects were identified during the visual inspection, you need to take an open-end wrench of a suitable size and tighten the screws securing the hinges. If the screws are tight and not loose, try unscrewing them and removing the door from the cabinet. Afterwards, install it back as smoothly as possible. Usually, after dismantling and subsequent installation of the hatch, it is possible to correct the situation.