Instructions for washing machine Haier HW70-BP12758/S

ACCESSORIES Haier washing machine HW60-BP12758 HW70-BP12758 HW70-BP12758 HW60-BP12758S HW70-BP12758S

1x User Manual

1x drain hose bracket

5x Plugs

1x bottom cover

1x inlet hose assembly

Legend

Yes

No

Option

Attention! Important information about safe handling!

General information and tips

Disposal

The presence of this symbol on the product, accessories or materials indicates that, at the end of their useful life, the appliance or its electronic accessories should not be disposed of with other household waste.

To avoid possible threats to the environment or human health as a result of uncontrolled waste disposal, it is necessary to separate such components from other types of waste and send them for recycling. In this way, you will contribute to the environmentally friendly reuse of materials. Residential consumers should contact the point of sale where the product was purchased or the appropriate local authority to find out how they can recycle their product environmentally. Corporate consumers can contact the supplier and clarify the conditions for purchasing the product. This product and its electronic accessories should not be disposed of with other industrial waste.

Before turning on the Haier washing machine HW60-BP12758S HW70-BP12758S for the first time

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have read this manual or been given instructions on how to use the appliance in a safe way and understand the hazards involved. . Children should not play with the device. Cleaning and user-facing maintenance should not be performed by children without supervision. Children under three years of age should not be near the device unsupervised.

Should...

✓ensure that all shipping bolts are removed ✓connect the machine to a separate, grounded outlet ✓ensure that the plug and power cord are not damaged ✓hold the plug (not the power cord) when disconnecting the power ✓ensure that the mains fuse is rated for 15 A ✓ Keep the machine away from heat sources and direct sunlight to prevent aging of plastic and rubber parts. ✓ make sure that the power cord does not fall under or into the device and avoid damaging the power cord. ✓ check the reliability of hose connections and fastenings and the absence of leaks. If there are any, turn off the water supply and tighten the connections. Do not use the washing machine until the hoses are fully secured.

Do not do it…

x touch or use the machine with bare feet or with wet hands or feet x use flammable detergent or dry cleaning agent x use flammable sprays near the machine x remove or insert the power plug when flammable gas is present x allow children or disabled people to play with the machine or packing materials x Install the machine outdoors in areas with high humidity or in areas prone to leakage, such as under or near a sink. If a leak occurs, turn off the power and allow the machine to dry naturally x Place the machine on a carpet or in close proximity to walls and furniture

When using your washing machine every day, you should...

✓ fasten zippers, secure loose threads and small elements to avoid things getting tangled. If necessary, use a special washing bag or net ✓ Always unplug the machine at the end of the washing program to save energy and ensure safety. Keep the underside of the hatch clean ✓ To avoid unpleasant odors, leave the door open when the machine is not in use ✓ If the power cord is damaged, have it replaced only by the manufacturer, its service agent or other qualified person

Do not do it …

x touch the door during washing - it may be hot. x Place heavy objects or sources of heat or moisture on the machine. x wash rubber or foam materials at high temperatures. x open the detergent container during the wash process x forcefully open the door - it is equipped with an automatic lock and opens a short time after the end of the wash cycle. x open the door if the water level is visible in the hatch x cover or wrap the machine with a plastic bag when not in use to allow it to dry

Saving Tips

Achieve the most economical consumption of electricity, water, detergents and time by using recommended load limits

Do not exceed the dosage of detergent specified in the manufacturer's instructions. Select the required washing temperature. Modern detergents give very good results even at temperatures below 60°C. Use temperatures above 60°C only for heavily soiled laundry (clothes).

Description of the washing machine Haier HW60-BP12758 HW70-BP12758 HW70-BP12758 HW60-BP12758S HW70-BP12758S

1. Detergent/fabric softener container 2. Top cover 3. Start/Pause button 4. Control panel 5. On/Off button 6. Door 7. Filter cover 8. Adjustable feet

1. Shipping bolts (T1-T4) 2. Rear cover 3. Rear cover screws (S1-S4) 4. Power cord 5. Fill valve 6. Drain hose

Preparing the machine Haier HW60-BP12758 HW70-BP12758 HW70-BP12758 HW60-BP12758S HW70-BP12758S

Remove all packaging materials to prevent the machine from becoming unstable, including the polystyrene foam base. After opening the package, there may be drops of water on the plastic bag or on the viewing window. This is a normal phenomenon and is the result of water tests at the factory.

Installation of Haier washing machine HW60-BP12758 HW70-BP12758 HW70-BP12758 HW60-BP12758S HW70-BP12758S

Installing the bottom cover (if equipped)

When you open the package you will find the bottom cover

1. Lay the machine on its side, unscrew the four legs 2. Install the cover. Then screw the legs back through the lid and four holes. Raise the washing machine.

REMOVAL OF TRANSPORT BOLTS

Shipping bolts are designed to secure the tank inside during transport.

1. Remove the four bolts on the rear panel and remove the rubber seals and plastic stabilizers located inside the machine. 2. Install the plugs included in the kit into the remaining holes.

Attention:

If necessary, to remove rubber seals and plastic stabilizers, remove the back cover by unscrewing the back cover screws. Then replace the cover. Keep the shipping bolts and plastic stabilizers in a safe place for future use.

adjustable legs

There are adjustable feet under the bottom of the washing machine. Before use, they must be adjusted so that the machine is level. This will minimize vibration and noise during use. This will also reduce wear and tear. We recommend using a spirit level to level the instrument. The floor should be as hard as possible and as level as possible.

1. Loosen the lock nut (1) using a wrench. 2. Adjust the height by turning the foot (2). 3. Tighten the lock nut (1) to the housing.

Inlet hose

✓Connect the inlet hose to the inlet valve ✓Connect the hose to the cold water tap ✓Check for leaks.

Use the hoses supplied with the device. Do not reuse old hoses!

Drain hose

✓Secure the drain hose with a special clamp to prevent water from leaking out. Do not use drain hose extensions; if a longer hose is required, contact a service technician.

✓The height of the drain hose should be 80-100 cm. Attach the drain hose to the clip on the back of the washing machine to prevent it from falling off.

The drain hose must not be immersed in water, but must be securely fastened and monitored for leaks. If the drain hose is lying on the ground or the height of the drain pipe is less than 80 cm, water will continuously drain from the washing machine while it is filling (self-draining).

CONNECTING TO A POWER SUPPLY

Before connecting to a power source, check that:

✓The socket is designed for the maximum power of the washing machine (For safety reasons, the fuses in the power circuit must be rated at least 15 A). ✓ The voltage must meet the requirements. ✓ The electrical outlet must be the same size as the washing machine plug. ✓ Connect the machine to a grounded outlet.

FUNCTIONS OF Haier WASHING MACHINE HW60-BP12758 HW70-BP12758 HW70-BP12758 HW60-BP12758S HW70-BP12758S

Control Panel

1. Detergent/fabric softener container 2. Delay start button 3. i-time button 4. Temperature button 5. Spin button 6. Rinse button 7. Steam button 8. START/PAUSE button 9. On/Off button » 10. Display

OPERATING FUNCTIONS of washing machine Haier HW60-BP12758S HW70-BP12758S

Custom machine settings

The first switching on of a new washing machine is carried out with an empty drum and with the choice of any long program from the available ones. Afterwards, you will have to select washing modes, focusing on the intensity of soiling of the laundry and the type of fabric from which the product is made.

The parameters of each washing program are described in detail in the instructions for the Haier automatic washing machine.

Also, the housewife may be confused by additional buttons on the control panel and unclear symbols. Explanation of all symbols is in the user manual. The book explains what the indicators on the dashboard do, what functions and options are hidden behind the drawn icons.

For example, when you just need to freshen up purchased T-shirts, you can select the quick wash function. If clothes made of mixed or synthetic fibers are placed in the drum, it is possible to run the “Synthetic” mode.

When you need to clean your baby’s clothes, you should activate the program of the same name and enable the “Double Rinse” option.

You should choose the washing mode very carefully. If you wash wool on the “Cotton” program, you will not be able to avoid the product losing its shape - the item will “shrink”.

For demanding and delicate fabrics, special, gentle cleaning parameters are provided; for durable and dense materials, completely different conditions are provided. When the washer finishes working, you need to wait a couple of minutes and only then take the clothes out of the drum. Just during this time the hatch will unlock.

Source: https://real-electro.ru/kak-nastroit-stiral-nuyu-mashinku-haier/

PROGRAM MODES OF THE WASHING MACHINE Haier HW60-BP12758S HW70-BP12758S

Conditioner compartment Liquid detergent compartment

For detergent

Not used

● — Yes O — Option / — No

“Cotton +” is the standard program for energy classification.

Washing methods

This washing machine is intended for domestic use only. If the machine is used for commercial purposes or other non-domestic household purposes, the warranty will be void. Do not use the machine for purposes other than those for which it was designed. Follow the instructions on each item's label and only wash clothes that are machine washable.

POWER SUPPLY

Connect the washing machine to a power source (220 V - 240 V~/50 Hz).

WATER CONNECTION

Open the tap. The water should be clean and transparent.

Before use, make sure there are no leaks by opening the tap.

PREPARING THE LINEN

— Sort clothes depending on the composition of the fabrics (cotton, synthetics, wool or silk), as well as the degree of contamination. - Separate white linen from colored linen. Wash colored items by hand first to determine if they will discolour. — Empty pockets (hairpins, coins, keys, etc.) and remove heavier decorative items (brooches).

Unhemmed garments, delicate fabrics and finely woven fabrics such as thin curtains should be placed in a special washing bag (it is best not to wash them in the washing machine). Fasten the zippers and hooks, make sure the buttons are sewn firmly; Place small items such as socks, belts, bras, etc. into a washing bag. Larger items such as sheets, bedspreads, etc. must be unrolled before loading. Shirts should be turned inside out.

Caution: Non-woven items, as well as small, loose and sharp objects can cause malfunction and damage to clothing and the machine. Remove small items (keys, coins, etc.) and hard jewelry (such as brooches) from your pockets.

A few words about the manufacturer

Haier was founded in 1984 in China. The manufacturer does not specialize in one thing, producing a variety of household appliances. The origins of the brand go back to the 20s of the last century. At that time the company was called Qingdao Refrigerator Factory.

The new brand arose as a result of the transfer of production to a new owner. The name Haier translates as “sea”, which symbolizes the company’s wide range of products.

The company introduced its products to the world market in 1999. The equipment became available for the CIS countries and the Russian Federation in 2007. Now the concern is one of the three largest manufacturers.

The brand's factories are open in Malaysia, China, the USA, Jordan, Indonesia and the Philippines. About five production facilities operate on the African continent.

In addition, the company has its own research and scientific centers located in Asia and Europe. The company also has its own production in the Russian Federation. In 2016, a large plant was opened in Naberezhnye Chelny.

Washing machines produced by the company are in demand all over the world. The product benefits from both reliability and functionality. It is not surprising that the technology has become widespread in 160 countries.

SELECTION OF DETERGENT FOR WASHING MACHINE Haier HW60-BP12758S HW70-BP12758S

The efficiency and productivity of washing are determined by the quality of the detergent used. A special product for automatic washing machines without foaming gives good washing results. Special detergents should be used for synthetics and woolen items. Do not use dry cleaning agents such as trichlorethylene or similar substances.

Do not add more detergent than necessary; otherwise, it may result in one of the following situations and damage to the washing machine, which will affect the service life of the machine.

1. Due to excessive foaming, the rinsing time will be longer than usual. 2. Foam may overflow from the detergent dispenser due to increased foam pressure. 3. Foam may not be washed away after the final spin.

Recommendations:

1. Wash the detergent tray once a week. 2. It is necessary to follow the detergent dosage recommendations on the powder or liquid detergent packaging.

ADDING WASHING MACHINE DETERGENT Haier HW60-BP12758 HW70-BP12758 HW70-BP12758 HW60-BP12758S HW70-BP12758S

Pull out the detergent container and load detergent into the appropriate compartments. Carefully close the detergent drawer. (Follow instructions on tray)

Do not overuse conditioner; otherwise it may damage the artificial fibers.

Why do you need to clean the washing machine drum?

The drum, when dealing with dirty laundry, becomes dirty over time. In washing machines without automatic cleaning, you have to do it yourself. To do this, pour bleach, vinegar, citric acid into the machine, add soda or other cleaning and disinfectants.

Thanks to treatment with cleaning agents, the drum gets rid of dirt, bacteria, mold, scale, unpleasant odors and soap deposits. If you don’t clean the “inside” of the machine in time, a putrid smell will emanate from it, and washed items will also smell like it.

If you neglect the cleanliness of the SMA, it will fail prematurely. If you bought a model with Eco, you don’t have to use special cleaning products or run the washing machine empty - the device will take care of its cleanliness.

CLEANING THE DETERGENT TRAY Haier HW60-BP12758S HW70-BP12758S

Clean the detergent dispenser tray regularly. Pull out the tray, rinse it clean with water and replace it.

Clean the filter once a month:

Clean the filter once a month:

1. Turn off the machine and disconnect it from the power supply (Fig. 1). 2. Open the filter cover on the front right corner of the machine (Fig. 2). 3. Place a flat container under it to drain the remaining water (Fig. 3). There can be a lot of it! 4. Pull the drain pipe out and hold its end over the container (Fig. 3). 5. Remove the plug from the drain pipe (Fig. 3). 6. After complete drainage, close the drain hose and insert it back into the machine (Fig. 4). 7. Unscrew and remove the pump filter by rotating it counterclockwise (Fig. 5). 8. Remove foreign objects and dirt (Fig. 6). 9. Clean the pump filter thoroughly, for example, under running water (Fig.7). 10. Reinstall the filter (Fig. 8). 11. Close the filter cover.

The filter must be installed in place, otherwise it may cause water leakage. Place a container under the drain pump filter to collect any excess water that may leak from the pump.

NOTE. For regular maintenance, we recommend running the Self-Cleaning program without loading once every three months to remove possible deposits. Add a small amount of detergent or use a special washing machine cleaner (follow the instructions for this product).

In case of a power outage

The current program and setting are saved. Once the power supply is restored, the operation resumes. If a power failure interrupts the wash program, the machine door is mechanically locked. It is not easy to see the water level in the machine through the door. Risk of burns and water leakage! Do not pull the door handle until the door is unlocked.

FILLING VALVE AND FILLING FILTER

To prevent foreign materials from clogging the valve and stopping water flow, the fill valve filter should be cleaned regularly.

MOVING THE MACHINE Haier HW60-BP12758 HW70-BP12758 HW70-BP12758 HW60-BP12758S HW70-BP12758S

If the machine needs to be transported to another location, the shipping bolts that were removed during installation should be installed to avoid damage. Follow the instructions below.

1. Remove the plugs. 2. Install plastic stabilizers, rubber bushings and shipping bolts. 3. Tighten the bolts with a screwdriver (wrench).

LONG DOWNTIME

If the washing machine is left unused for an extended period of time, unplug the power cord and turn off the water supply. Open the washing machine door to prevent moisture and odors from forming. Leave the car door open for the entire period of inactivity.

Conclusions and useful video on the topic

The video explains the rules for choosing a washing machine:

Haier household appliances are modern high-tech products. The machines are quite reliable, efficient and simply wash well. Although there are some drawbacks such as poor-quality rinsing and lack of display in certain models.

But these are infrequent cases, mainly inherent in the cheapest units. Therefore, these disadvantages do not affect the demand for Haier washing machines among buyers from all over the world.

Which washing machine did you choose? Please tell us why you preferred a particular model, and whether you are satisfied with the performance and functionality of the purchased equipment. Add reviews, comments and ask questions - the contact form is below.

TECHNICAL SPECIFICATIONS OF THE WASHING MACHINE Haier HW60-BP12758S HW70-BP12758S

Technical specifications (according to EU 1061/2010)

1) Based on 220 standard wash cycles for cotton programs at 60°C and 40°C at full and partial load and consumption of low energy modes. Actual energy consumption will depend on how the appliance is used.

2) Based on 220 standard wash cycles for cotton, 60 and 40 full and partial load programs. Actual water consumption will depend on how the appliance is used.

3) Class "G" is the least effective, and class "A" is the most effective.

4 ) Based on the standard 60°C cotton program at full load and the standard 40°C cotton program at part load.

5) “Standard cotton 60 program” and “Standard cotton 40 program” are standard washing programs for which information is available on labels and in certificates. These programs are suitable for normal washing of soiled cotton laundry and are the most efficient programs in terms of combined energy and water consumption.

6) In case there is a power management system

7) Based on the standard Cotton 60 program at full load

Basic technical information about the equipment.