Electric storage water heaters ZANUSSI or ELECTROLUX - which is better to choose

Electric storage water heaters ZANUSSI reviews and prices

See all prices

Electric water heater Zanussi Splendore ZWH/S vertical, 50 l

Name:

Alexey
Review:
I bought this water heater about half a year ago, at the dacha, to replace an old one that had broken down.
It copes with its intended purpose excellently. I didn't notice any shortcomings. Pros:
Works fine
Cons:
Didn't notice

Name:

Dmitry
Review:
There was no hot water in the house for four months, I bought this water heater, it worked perfectly, there were no problems with it, now it is mothballed until the next hot water outage. I read reviews that many burned out and leaked, which means I was just lucky with this model. that's all.
Pros:
Flat, easy to operate

Name:

Leonid
Review:
Personally, 50 liters is enough for us, we didn’t want to take more because of the size of the electric water heater itself, it would take up too much space.
Of course, you can’t run a bath for everyone, but it’s enough to wash in the shower. This one heats up quickly and operates silently. Mounts horizontally only. The quality was fine. Advantages:
small, heats up quickly, does not make noise
Disadvantages:
50 liters will not be enough for a large family

Name:

Valentina
Review:
We don’t have hot water at our dacha, only cold water, that’s why we bought this electric water heater there.
Although we don’t live there permanently, we travel regularly and it’s clear that hot water in the house is simply a necessity. The tank volume here is 50 liters, but it is quite enough for our needs. It heats water quickly and, thanks to a mechanical thermostat, maintains a hot water temperature. It is very comfortable. In general, after 5 months of use we have no complaints. Satisfied. Pros:
Consumes little energy.
High quality, strong plastic. Heats water quickly. Disadvantages:
We are satisfied with everything.

Name:

Julia
Review:
After reading the previous reviews, I was a little surprised.
When we bought it, we didn’t read it, probably fortunately, because I would have doubted it. We have been using this electric water heater for about 2 months and during this time there have been no failures or complaints about it. It heats up almost silently and does not look bulky due to its elongated shape. 50 liters is enough for 2 people. The controls are mechanical and extremely simple. So, personally, I’m very pleased, especially considering its price, even less than ten. Advantages:
nice shape, visually seems smaller than it actually is
Disadvantages:
haven’t noticed anything like that yet

Name:

Alexey
Review:
Leaked after 10 days of use.
Pros:
Flat.
Disadvantages:
The tank leaked.

Name:

Alexey
Review:
It worked perfectly for 10 days, then it started dripping from underneath the lid, and a couple of days later it started leaking from under the top lid along the body!!! I live in Zheleznogorsk - now there will be a reason to go to Kursk several times. Thanks to Leroy!
Pros:
Flat, inexpensive.
Disadvantages:
The puddle under the heater is not pleasant.

Name:

Ivan
Review:
On the first day of purchase it broke down, I took it under warranty, waited for 10 days, was left without hot water, picked it up from repair, worked for 3 hours, broke down, you can’t imagine how I swore, future buyers don’t take it!
I’ll probably sue these Kulibins Disadvantages:
One continuous flaw

Name:

Sergey
Review:
The water heater itself is good, they write that it immediately burned out.
You just need to fill the tank completely and then plug it into the outlet. Pros:
Good design.
Disadvantages:
Non-return valve (the insides fell apart)

Name:

Diana
Review:
a complete drawback
Advantages:
none!
Disadvantages:
connected this afternoon. washed the dishes and covered myself!!! complete closure!!!! I don’t recommend it to anyone! Leroy, wait for us tomorrow morning!!!!,

Electric water heater Zanussi Splendore ZWH/S vertical, 30 l

Name:

Sergey
Review:
The water heater itself is designed for a maximum pressure of 6 Bar, and the safety valve included in the kit is 8 Bar... (Russian assembly!!!). And that one was defective, it ran immediately even when the water heater was filled.. now you have to look for a safety valve for 5 -6 Bar..
Advantages:
appearance
Disadvantages:
the safety valve is incorrectly calculated...the safety valve is not working properly.

Name:

Andrey
Review:
This water heater worked for 3 months, after this time it began to leak.
When contacting the service center, the problem was not resolved by KVEL SC within 1 month. Delivered in dirty condition. Pros:
Heats up quickly, lasts a day.
Disadvantages:
Quality at “0”

Name:

Anton
Review:
I bought a hat heater for a delivery restaurant, installed it a month after purchase, worked for exactly one day, with little water circulation, refused to heat up the next day, they didn’t change it in Leroy - they said it needed an examination, took it to the service center, returned it after three days, installed it.. two days after installation it died again(((I'll take it and throw it straight into Leroy

Name:

Dima
Review:
I’ll try to call Leroy tomorrow and see what he says.
Advantages:
heats up quickly, but after 2 months it began to drip from the bottom cover
Disadvantages:
after 2 months the tank was leaking

Name:

Evgeniy K.
Review:
An excellent heater, ideal for a bathhouse, holds heat perfectly (with the power turned off, it kept the water hot for more than a day.) Compact, can be placed both vertically and horizontally.
Advantages:
compact, reliable, keeps warm for a long time
Disadvantages:
none

Name:

Irina
Review:
We bought an electric heater in June, did not use it until the beginning of August, and then decided to use it because the hot water was turned off.
When filling the tank, all the water flowed through the top holes, apparently defective. We'll take it back!!!!! Advantages:
None
Disadvantages:
The first time I used it, it started to drip.

Name:

Anton
Review:
Purchased the product on April 27, 2019. When turned on, the machine was knocked out.
As it turned out, the thermostat was faulty (the reason was determined by the service center) Replacement under 20-day warranty Advantages:
Good design
Disadvantages:
The first impression is spoiled. Let's look at further operation.

Name:

Anton
Review:
I bought it without reading the reviews, but they write that such water heaters leak and explode!
I think the reason is that the tank is designed for 6 bar, and the check valve (included) is designed for 8 bar! I won’t experiment, I’ll return it to the store. Advantages:
compact
Disadvantages:
tank is designed for 6 bar

Name:

Regina
Review:
We got a defective explosive device, the heater caused a flood when it was disconnected from the power supply.
Installation rules have been followed. Advantages:
Compact
Disadvantages:
Unreliable

Name:

Alexey
Review:
I don’t recommend it, I bought it on 04/27/2019, after heating the tank twice, it completely stopped working, I contacted Leroy Merlin (N. Novgorod) regarding the replacement of defective products, they promised to call me back, I’ve been waiting for an hour,

Electric storage water heater Zanussi ZWH/S 15 Novelty U vertical, 15 l, stainless steel

Name:

Sergey
Review:
WORKED FOR 2 MONTHS THE HEATING HEATER BURNED OUT! I DO NOT RECOMMEND FOR BUYING! The service center refuses to repair it under warranty!

Name:

Dmitry
Review:
it’s enough to take a shower, and the heating is set to almost minimum so that the water is not hot. It heats up quickly, so I don’t see the point in buying bulky 30-50 liter heaters.

Name:

Nikita
Review:
I bought it in order to survive a two-week preventive maintenance at the boiler room.
In fact, there was no hot water from the boiler room for all three weeks. During this time, the heating element failed twice, the first time I contacted the warranty company, for which I received a referral for repairs a week later (why do I need it in a week, when I now need to heat the water). I called the master, agreed to pick up the heating element, and installed it myself. 8 days of work and the RCD trips again, the problem is the same. The repair was again refused, citing bad water and “stray currents,” although the grounding in the house was completed. I wanted to buy something to replace it, but I was limited in size at the installation location. I got out of the situation by purchasing and installing an Italian-made heating element with a 1300 and 700 Watt heater and an anode (an anode is not installed in the standard version), connected one section so as not to overload the wiring. While it is working, the water is turned on, but as an emergency option, the boiler is on alert. Advantages:
Size, ease of installation
Disadvantages:
heating element weak point, unclear warranty, price

Name:

Evgeniy
Review:
I bought it when the hot water was turned off once again.
here the review is rather not about Zanussi but about the impression as a whole. The boiler fits under the bathroom sink. although the seller said that it’s only for washing dishes, it’s enough for a swim. in any case, it’s better than running around with a basin. Pros:
small, hot
Disadvantages:
expensive

Oven NEFF, AEG and MIELE

No registered user is viewing this page.

8 super useful IKEA products for small kitchens

20+ Quick Kitchen Care Tips

At the bar counter.

• Construction and repair
• Foundation
• Roof
• Walls
• Window
• Doors and partitions
• Ceiling
• Balconies and loggias
• Internal structures
• Floor
• Water supply and sewerage
• Heating
• Ventilation and air conditioning
• Gas and energy supply
• Lighting
• Plumbing equipment
• Security and home automation
• Baths, saunas, swimming pools
• Construction Materials
• Decoration Materials
• Tools
• Technique
• Laws and finance
• TechnoNIKOL

• Design and decor
• Apartment
• Bedroom
• Kitchen
• Dining room
• Living room
• Bathroom, toilet
• Hallway
• Children's
• Attic
• Small rooms
• Workplace
• Wardrobe
• Library
• Decoration
• Furniture
• Accessories
• Vacation home
• Landscape

• Redevelopment
• Catalog of houses

• Magazine

• News

• Events

• about the project
• Advertising on the website
• Advertising in a magazine
• Terms of use

• Contacts

• about the project
• Advertising on the website
• Advertising in a magazine
• Terms of use

• Advertising on the website

• Advertising in a magazine

• Terms of use

• Contacts

Are you a professional architect or designer?

IVD. Repair and finishing

Are you a professional architect or designer?

The IVD.ru website is a leading Internet project dedicated to the issues of reconstruction and interior design of residential premises. The main content of the site is the archive of the magazine “Ideas for Your Home” - exclusive author’s articles, high-quality illustrations, practical tips and lessons. A team of professionals is working on the project in close collaboration with famous designers, architects and leading publishing experts.

Electric storage water heaters ELECTROLUX reviews and prices

See all prices

Electric storage water heater Electrolux EWH 40 Regency vertical, 40 l, stainless steel

Name:

Alexander
Review:
It’s a pity that I didn’t read the reviews - I fell for the brand. I haven’t connected the water heater yet - but I’ve already encountered an unpleasant problem - such a “set-up” from the supplier: I drilled holes according to the template (one side of the package), without checking with the holes on the device itself - and it was not in my head to suspect something was wrong IN THE TEMPLATE from the manufacturer! The boiler did not fit into the holes according to the template; the difference along the long side (height) was one and a half cm! .. Well, the kit included only two hooks out of four.

Name:

Sergey
Review:
In the store, the seller said that the water heater can be installed horizontally. The instructions don't say anything about this. what to do?

Name:

Marcel
Review:
I resisted buying a water heater for 10 years. And so, I gave up and purchased this miracle of technology on June 17, 2019. I encountered the same problems that people describe in their reviews. 1 problem is an incomprehensible thread on the water supply, namely, if you try to connect it with a flexible connection purchased right there in the store, it does not fit onto the thread. Although a ball valve or tee can easily be screwed onto the same liner. I suffered for about forty minutes, then gave up and installed the connection through a ball valve. Problem 2 - if you do not have a socket for connection and you decide to use an extension cord, be prepared that the wires will get quite hot - this is dangerous. Therefore, you need to make a separate line for connection. 3. problem. Maybe it’s me who is so “happy,” but this miracle worked in our house for exactly 10 days. On June 27, 2019, at night, the circuit breaker in the distribution board tripped, turning off the sockets. In the morning, turning on the tap and receiving lukewarm water, I noticed that the indicator did not light up while the device was operating. Well, I thought, apparently the water is hot, because this device does not have any indication of the temperature or operation of the device.. But the water is warm! Not hot. There was no time to figure it out; they basically went to work. Leaving the decision for the evening. In the evening it became clear that the water heater was dead or dead or grunted, tired, whoever liked what. I called the store and they sent me to service. Well, great, I resisted for 10 years, I decided, and this “shaitan equipment” with a 7-year warranty sticker worked for 10 days!!!!! And now we need to dismantle it and take it for repairs. and by law it can last for 45 days, in general “BEAUTY” And hello again, teapots, boilers and basins.

Name:

Anna
Review:
On the first day after installation, the thermal protection button started to work and is still working.
The machine is displayed separately. Wire cross section 2.5. The installation was carried out by a master. Ouzo doesn't kick out. Disadvantages:
It is not possible to use the boiler calmly.

Name:

Ruslan
Review:
I bought the same one but for 50 liters.
It's not in the catalogue. And you need to leave a review. This water heater is made in Russia under Electrolux license. Where and by whom exactly is not written. Draw conclusions. Pros:
It has a USB port.
I suppose if you buy a wifi adapter through some program you can supposedly save electricity and integrate it into a smart home. But there is no information about which and where to buy. Disadvantages:
Hot water pipe with crooked thread. I barely screwed on the eyeliner. It was somehow difficult to take it off and take it to the store. I had to practice. And this pipe is crooked. The production quality is not up to par. The temperature regulator holds on flimsily, as if it would fall off.

No thermometer.

Name:

Anna
Review:
the electrical wire immediately began to get very hot. The water connections are facing crookedly.
Advantages:
keeps heat
Disadvantages:
apparently the cable cross-section is underestimated and is not designed for 3 kW

Name:

Evgeniy
Review:
I bought the same one, only for 30 liters, for some reason it is not in the catalogue. In the end, I didn’t check it in the store, at home I found a decent dent on the case, although the packaging was sealed, it’s good that it was in an inconspicuous place. The outlet tubes look like makeshift ones, one sticks out to the side, the other, without modification with a file, refused to connect to the liner. Heated up quickly, be sure to keep in mind that it has 3 kW and requires serious wiring,

Sink water heater 15 l, Electrolux EWH Rival, stainless steel

Name:

Natalya
Review:
Broke after using it for 2 weeks, returned it under warranty, repaired it and it immediately broke again
Advantages:
None
Disadvantages:
Operating time 2 weeks

Name:

Sergey
Review:
I thought that this was an ordinary water heater that would work for 5-10 years.
But he worked for less than two years. Advantages:
The advantages are very dubious.
He worked and warmed up. Then he broke down. Disadvantages:
Worked for one and a half to two years. Then, being under warranty: – became covered in rust; - drip; - began to receive electric shock.

In Leroy, the goods were accepted and sent to an authorized service center, which kept it for all the 45 days required by law, promising to eventually issue a certificate of non-repairability, on the basis of which the seller would return the money. The bad thing here is not that it leaked (happens to everyone), but that such a simple device is repaired and checked not within a reasonable 10-15 days, but for a long month and a half.

I don’t plan to buy Electrolux ever again, solely because of the slow warranty service.

Name:

Valentina
Review:
TOOK the first one, started leaking after 6 months.
They submitted it for examination, and 40 workers waited. For a minute, we sat for 40 days without hot water. The examination showed a manufacturing defect. We replaced it with a new one and after 2 months the tank started leaking again. With all this, my dacha is flooded with water and the entire laminate is already swelling. Disgusting quality! Considering that the company is well known, NEVER BUY! Advantages:
SMALL and cute
Disadvantages:
TOOK the first one, leaked after 6 months. They submitted it for examination, and 40 workers waited. For a minute, we sat for 40 days without hot water. The examination showed a manufacturing defect. We replaced it with a new one and after 2 months the tank started leaking again. With all this, my dacha is flooded with water and the entire laminate is already swelling. Disgusting quality! Considering that the company is well known, NEVER BUY!

Name:

Limarenko Sergey
Review:
We bought a trendy brand and a convenient size. We didn’t expect such a trick from this manufacturer, we dismantled it and handed it over to the service department.
Pros:
nice appearance, convenient size.
Disadvantages:
the tank leaked after two weeks of operation, due to a planned shutdown of hot water in the summer.

Name:

Igor
Review:
Drip during the second use
Advantages:
appearance, small size
Disadvantages:
weak tank

Name:

Eduard
Review:
It leaked after two weeks, out of stupid habit I threw away the receipt with the box, I had to additionally install a faucet in front of the water heater
Advantages:
Outwardly of good quality
Disadvantages:
It leaked after two weeks

Name:

Marina
Review:
My parents have been working for me for three years now, no complaints.
Pros:
High quality stainless steel, easy to use.
Disadvantages:
None.

Name:

Ivan
Review:
Installed at the dacha. Worked for a year without any comments.
Once I was left at sub-zero temperatures for a week in a filled state - I survived it normally, apparently the thermal insulation helped - I didn’t have time to freeze completely. Since I have a model with a top connection, it is impossible to drain it completely without removing it; in any case, some water remains at the bottom, so I left it for the winter. It started working without problems in the spring. Pros:
Appearance.
Disadvantages:
Haven't found any yet.

Name:

Alexander
Review:
extremely unreliable water heater.
I purchased it, it was installed by a specialist, plastic pipes were made to fit its dimensions, tiles were laid out, pressure gauges were installed to control the water pressure in the system, a dump valve was installed into the system, etc. Conclusion! The second time I turned it on, it started leaking. Tightening the nuts and sealant did not give any results because the housing was leaking. A month later I was ready to buy a second one just like it... Don’t redo the entire water supply system. So what do you think? The body began to leak immediately.. This is not an Electrolux. There are no words for this. Advantages:
small, pleasant to look at, almost a perpetual motion machine is beautifully written about it, but..
Disadvantages:
it only works once!!,

General characteristics of Electrolux equipment

The Electrolux brand belongs to a company from Sweden. The hallmark of the brand has always been the high-quality assembly of equipment, especially those produced in the early 2000s. Production facilities were located in Europe. Washing machines manufactured at that time serve almost flawlessly to this day and rarely require expensive repairs.

Currently, assembly lines operate in China and Russia. The quality of their work is inferior to European ones. The washing machines they produce have a number of problem areas:

• low quality plastic;
• unreliable engines;
• failing bearings;
• weak shock absorbers.

Experts give high marks to the equipment of the manufacturer Electrolux, which is produced in Europe, and rarely complain about low-quality components. Experts often advise purchasing a used European-assembled Electrolux washing machine instead of buying a new one made in Russia or China . The only disadvantage of such a purchase is usually the lack of a warranty card.

Important! Between Electrolux brand equipment made in Russia or China, it is better to choose the latter.

The Electrolux line of washing machines is represented by a wide variety of models. Among them there are horizontal and frontal, with wide and narrow bodies, as well as built-in appliances. As a rule, machines are equipped with a large number of operating modes, have high performance and energy efficiency. In addition, consumers note the low noise level as a significant advantage of Electrolux brand devices.

Test mode for Electrolux, Zanusi and AEG washing machines

Details Author: evgenij Category: Do-it-yourself washing machine repair

• Seal
• Email

How to enter diagnostic mode on a Zanussi, Electrolux or AEG washing machine

Sorry, but the article should be too long, since I will try to talk about all possible modifications of Zanussi, Electrolux or AEG washing machines. I'll start with the simplest ones, that is, under the control of EWM 1000 (+). Washing machines with a similar control panel have two main versions, in (photo 1) the horizontal arrangement of the buttons is shown, in (photo 2) you will see the vertical arrangement of the buttons. To enter such SM into diagnostic mode, you need to perform the following actions

• put the selector in position 0 (OFF)
• then connect the SMA to the power supply
• press the buttons as shown in the photo
• while holding the buttons, turn the knob to the right, to the first position
• after all this, you should see either the lights flashing or a beep

Test mode for AEG, Elktrolux and Zanussi washing machines controlled by EWM 1000 (+)

There are 7 fault checking modes for this line. In order, we will now list them. It is important that when switching from one mode to another, you take a 5-minute pause, otherwise the diagnosis may not be correct. Be sure to remove all laundry from the bin

1. Having entered the test mode, we immediately enter the first diagnostic mode, that is, the program selector should be in position 1. In this mode, the buttons are checked; if you press the button, it will either blink or hear a sound signal (in models with vertical button arrangement)
2. Turn the selector to position 2. Here you check the valve for filling the water into the main wash dispenser. The lock should also work, that is, the hatch should be blocked. The water level is controlled by a pressure switch, so water should not accumulate more than required
3. We turn the knob further and set it to position 3. Here we check the water inlet valve for the pre-wash and, just like in point 2, the lock should work, and the level is controlled by the water intake sensor
4. Mode 4 simultaneously turns on both valves. You need to turn the selector to position 4. Everything else is the same as in paragraphs “2 and 3”
5. Mode 5 is not used in the line we are considering. It can only be seen in those washing machines that have three valves
6. We put the selector in position 6 and go to the sixth mode. Here the heating element and water temperature sensor are checked. If the water level is less than the level, the SM will add water to the required level
7. In the seventh mode we check the engine. We move the rotary knob to position 7. In this mode, the SMA draws water to the desired level, then the motor turns on, first in one direction, then in the other. After this, the engine revs up to 250 rpm
8. In mode 8, the pump (drain pump) and spin are checked, that is, the engine speed will be maximum. The selector should be in position 8

Now about error codes. The last error can be seen as follows: you need to put the selector in position 10, after which the start and pause buttons will start blinking, we need to count these blinks. You can find out how to determine and decipher the error code for an AEG, Elktrolux and Zanusi washing machine without a display a little lower in this article. To exit the test mode, you need to turn the machine on and off twice. Now how to clear the error, in order to erase the error, you need to put the selector in position 10 and simultaneously press the buttons, as in Figure 1 or 2. If you see all the indicators blinking, then the error has been erased

Diagnostic mode for AEG, Eltrolux and Zanussi washing machines controlled by EWM 2000

There are SMAs with and without selector. We will analyze in detail the diagnostic mode for washing machines with a selector, since these are more difficult matters. Below you can watch a video about the test mode in SM without a selector. Let's return to washing machines that have a selector. To begin with, I suggest you look at a selection of photos that show a combination of buttons, thanks to which you can put the washing machine into test mode and diagnose the malfunction

Fig 1. Control panel with program selector. Press and hold buttons 2, then turn on the machine using button 1. The program selector should be in position 0 (OFF), hold the buttons until the indicators flash

Front panel photo