How can you clean your washing machine using Domestos?


In an effort to carry out preventive cleaning from fungus, mold and dirt, many housewives rush to add Domestos to the washing machine in order to achieve complete disinfection and protect their health. This product, along with soda and vinegar, has long been considered an inexpensive but very powerful cleaner for household, sanitary equipment and work surfaces. But we shouldn’t forget about the aggressive effect of the product, so first we’ll figure out whether it’s possible to introduce the machine to Domestos. The arguments for and against are given in the article.

What can be used instead of white?

Instead of “Whiteness,” you can use any bleach containing chlorine: liquid Ace or powder Bos.

Interesting materials:

What does it take to get married to a prisoner? What do you need to declare when leaving Russia? What do you need to add to change the color of hydrangea? What should you exclude to lose weight? What should you bring to a christening? What do you need before the wedding? What should you take if your heart rate is high? What do you need to remove from your diet to lose weight? What do you need for the gym? What do you need to know when choosing a kitchen hood?

Is it permissible to use such a tool?

Many housewives will say that only whitewash, Domestos, ACE and other similar products can cope with stains in the washing machine. But manufacturers do not agree with their opinion and, on the contrary, strongly do not recommend using the mentioned brands for preventive cleaning . The reason for the ban is the presence of chlorine in their composition - an aggressive cleaner that can harm the insides of the machine.

Manufacturers recommend using Domestos and other chlorine-based products in washing machines only if a virus or infection is suspected.

But there is a caveat - only prolonged contact with chlorine is harmful to the machine. Therefore, one-time cleaning with an interval of at least 6 months will not damage even the most vulnerable parts of the machine: rubber gaskets and hoses with pipes. The main thing is to strictly follow the instructions and do not forget about the rules of personal safety. Algorithm for cleaning a machine with Domestos.

  1. We wear rubber gloves to prevent the product from getting on the skin of your hands.
  2. Make sure there are no dirty things in the drum.
  3. Apply the liquid evenly to the drum and the hatch cuff.
  4. Close the door tightly and do not go near the machine for 20 minutes.
  5. After 20 minutes, pour another 50 ml of Domestos into the drum and start the machine on the “Rinse” program.
  6. At the end of the cycle, we repeat the start, choosing a mode with a water heating temperature of over 90 degrees and pouring about 200 grams of dry citric acid into the main compartment of the tray.
  7. We wipe the drum, cuff, door and powder receptacle dry and leave the machine open for ventilation for at least an hour.

You should wash with Domestos carefully. It is necessary to control the cleaning process, as the machine often begins to make a quiet noise. In this case, the machine stops, and the pump, garbage filter and drain hose are thoroughly washed. We must not forget that a strong cleaner will cause the rapid release of hard deposits and scale, which cause blockages and jamming. The main thing is to react in a timely manner, remove them and continue washing.

The effect of the procedure will appear immediately: fungal plaque and unpleasant odor will disappear. The scale will also be removed from the heating element, which will increase the service life of the washing machine for another couple of years. But if your financial situation allows, it is better to choose more expensive and gentle products instead of potent cleaners . Their use is absolutely safe, and the complex result will allow you to get rid of viruses, bacteria, dirt and all the widows of the fungus. The modern market offers many options: disinfecting soft gels Velvet, Vanish and Belle, eliminating mold and scale Doctor Beckman, Doctor TEN Antibacterial and Korean SANDOKKAEBI.

Causes of mold

The main reason for the appearance of an unpleasant odor, mold or mildew is savings, namely washing things at low temperatures. There are other factors:

  • failure to remove limescale in a timely manner;
  • use of washing powders without bleaches;
  • a large amount of rinse aid is added.

It is these factors that increase the risk of developing pathogenic microflora in the washing machine. A temperature of 60 degrees does not kill mold spores.

Bleach also contains substances that kill bacteria and viruses. Otherwise, a favorable environment develops. When using low-quality fabric softener, a slimy layer forms on the walls of the washing machine. This is where the fungus multiplies. It is worth remembering that excessive humidity and heat are a favorable environment for mold.

Disinfection with peroxide

The advantages of this method are obvious - while chlorine-containing detergents actively fight mold in a few minutes, peroxide gently cleans the insides of the car. At the same time, the compounds included in hydrogen peroxide prevent the rubber components of the household appliance from hardening.

Frequent use of chlorine-containing substances provokes the appearance of small cracks, which disables the machine very quickly.

You can remove black deposits and a strong musty smell as follows:

  • Pour half a glass of baking soda into the powder tray. About a dozen tablets of hydrogen peroxide (Hydroperite) are added to the same compartment.
  • The device is started in washing mode, selecting the maximum temperature mode.
  • The machine should work in high mode for the first half hour, and then you should switch the mode to “rinse” and wait for it to complete. If this is not possible due to the program, you can wait until the wash is completed.
  • Upon completion, all removable parts of the machine are removed and laid out on a towel to dry. The drum must be wiped with a dry cloth.

Domestos and citric acid

In especially advanced cases, heavy artillery in the form of aggressive household chemicals can help. An antifungal agent such as Domestos can even corrode rust, and therefore when used against rot it must be diluted in a ratio of 1 to 5.

First of all, you need to put on personal protective equipment - rubber gloves and a respirator. In the bathroom, close the windows and doors to prevent the smell from spreading further throughout the apartment. The liquid is applied to the surface of the drum and the rubber band, rubbing it into the parts with a sponge. The washing machine is left in this form for several hours so that the antifungal chemicals properly treat the infected part.

After 4-5 hours, you should turn on the washing machine and select the rinse mode (but not wash). Add three tablespoons of citric acid to the powder compartment and continue rinsing. After this, you need to select a wash, switching to the maximum temperature setting.

Citric acid helps clean the inside of the washing machine from mycelium, as well as free tubes and water lines from scale. After this, all that remains is to ventilate the machine and wipe the drum dry.

Housewives' opinion

It is interesting to study real reviews of people who have tried this method of cleaning a washing machine. We invite you to consider some of them.

Marina, 50 years old Having read on the Internet one of the ways to quickly and economically clean a washing machine with Domestos, I decided to try it. I didn’t take any risks and wiped the necessary areas with the solution. The unpleasant smell in the machine has disappeared. Now I carry out disinfection this way all the time.

Lyudmila, 45 years old I decided to try cleaning the washing machine using Domestos. I read the instructions on the Internet and began to act. I poured the product into the car and turned it on. After 10 minutes of operation, the electrical appliance became very noisy. It's good that I didn't go to the store. I cleaned the drain hose and continued cleaning. The product is super, but as it became known later, it should not be abused.

How to determine the scope of the problem

There are many different parts in a modern washing machine. With constant use, pollution forms both on visible parts and inside the unit. If fungus is suspected, inspect the entire device. First, mold affects plastic and rubber parts, and then it also affects metal parts.

To detect fungus, the machine is checked in the following order:

  • the rubber seals are inspected by bending the edges with your hands;
  • hoses leading to the container and tank are checked after removal;
  • containers with detergents and softeners are removed and inspected;
  • the drain hose filter is removed after closing the water supply tap, washed and disinfected;
  • the middle part of the drain hose is checked after disassembly;
  • the folds of the seal are visually inspected;
  • The outside of the tank and the internal equipment of the unit can only be inspected with the help of a specialist.

Self-repair algorithm

Once the cause is determined, simple troubleshooting can be done.

Machine imbalance

  1. Turn off the device from the button and from the network;
  2. Wait for the door to unlock;
  3. Open the drum or drain the water in an emergency way;
  4. Remove laundry and sort it;
  5. Close the drum;
  6. Start the machine in spin mode.

Shock absorbers and dampers

  1. Remove the panel from the front or back of the equipment;
  2. Press down the tank with your hand. If it is level, the springs are good;
  3. Inspect the parts if the tank is loose;
  4. Find the dampers from below under the tank;
  5. Replace parts by unscrewing the fasteners from below;
  6. Use a nut to secure the damper sleeve at the top to neutralize the latches;
  7. Remove the bushing using pliers;
  8. Install the correct part.

Important! Older models are equipped with shock absorbers to regulate vibration, while modern ones are equipped with dampers. The process for replacing spare parts is no different.

Incorrect installation

  1. Checking the evenness of the surface with a level;
  2. Leveling the floor or installation site;
  3. Leg adjustment;
  4. Placement of anti-vibration stands.

Important! Legs can be trimmed if necessary

Extending the service life of the machine

Manufacturers promise that the machine will last at least 5-7 years. But with skillful handling and compliance with all operating rules, the machine will work even longer. And systematic preventive cleaning must be given paramount importance. But other activities are no less important:

  • soften the water with each wash by adding special products;
  • carefully check all pockets to prevent small items, paper, and jewelry from getting into the tank and drum;
  • do not overload the drum with things, remembering the maximum permissible loading weight;

Don’t forget about the minimum drum load, which is set on average to 1-1.5 kg of dry laundry.

  • for regular washing, choose modes with water heating less than 90 degrees; with frequent use of high-temperature programs, the machine becomes vulnerable to breakdowns;
  • use special mesh bags for washing items with metal elements, faded woolen items and shoes;
  • control the washing process in order to promptly respond to leaks, uncharacteristic knocking or grinding sounds;
  • After each wash, wipe the drum and rubber seal dry;
  • leave the hatch door and tray open to ensure free passage of air inside the housing;
  • clean the garbage filter at least once a month;
  • run an “empty” wash if you do not plan to use the machine in the near future.

Careful handling of electricity is also of particular importance. Thus, it is strictly forbidden to turn off the machine by unplugging the cord from the electrical outlet, otherwise it is easy to damage the control board. Ideally, you should connect a voltage stabilizer to the machine to eliminate voltage drops that adversely affect the unit system.

The presence of dirt, mold and bacteria in an automatic washing machine has a bad effect not only on the quality of washing, but also on the health of its owners. Domestos will allow you to quickly and effectively overcome all accumulated troubles, but only with strict adherence to safety rules.

Interesting:

  • Cleaning the washing machine with folk remedies
  • How to clean a washing machine with vinegar and soda?
  • How to remove mold in a dishwasher?
  • Washing machine mildew cleaner
  • How to clean mold from a cuff in a washing machine?
  • What to do if mold appears in the washing machine?

Reader comments

  • Share your opinion - leave a comment

Video material

If all the methods failed to achieve any positive results and the mold still makes itself felt, then you will have to contact a service center for servicing household appliances. A professional specialist will disassemble the equipment, remove parts, subject them to a quality check, carry out cleaning with special means and, if necessary, replace damaged elements so that the entire equipment does not break down. Practicing preventative cleaning of equipment helps prevent serious damage. Therefore, do not ignore such measures, otherwise it will soon hit both your wallet and your free time.

Where does dirt form in the machine?

It is not always necessary to start a comprehensive cleansing with several cycles and complete cleansing. Sometimes it is enough to treat the most “sore” areas of the machine with a weak Domestos solution, which will be much faster and safer. We are talking about the most favorable areas for the emergence and reproduction of microbes and parasites: the dispensary, the garbage filter, the drum and the sealing cuff. We act like this.

  1. We start with the drainage system, repeating the procedure at least once a month. We find the filter behind the technical hatch in the lower right corner and unscrew it. Drain the water after placing a container or rag nearby. Next, we dilute Domestos with water and soak the nozzle for a few minutes, after which we rinse it under the tap and return it to its place. We do the same with the drain hose.
  2. We pay attention to the container for detergents, where bacteria and fungus like to settle. Press the locking latch, pull the dispenser towards you and take out the tray. We rinse thoroughly under water, and in case of strong stagnation, dilute the solution with dishwashing or laundry gel. For proper cleaning, you can use an old toothbrush. It is also better to regularly disinfect the tray using a small amount of Domestos.

Don’t forget about the hole for the powder receptacle, which should be washed and wiped dry.

  1. Open the hatch door and clean the drum and sealing collar with a sponge soaked in a solution of vinegar, Domestos, citric acid or soda. You should be more careful with vinegar - an unpleasant odor will remain in the machine, which can only be removed by a long rinse and pouring conditioner into the tray.

If you regularly perform the described manipulations, then the fungus and bacteria will not have time to spread throughout the washing machine. But in severe stages, as well as when viruses such as hepatitis, influenza or tubercle bacilli get inside the machine, complete disinfection is necessary . In this case, it is necessary to fill in Domestos or other aggressive chlorine-based products.

Rating
( 1 rating, average 4 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]