Instructions and manual for Samsung S1021 in Russian


Washing machine user instructions...

Washing machine user instructions

  • Image
  • Text
  • Content

User instructions

washing machine

81021

8821

8621

Safety precautions………………………………………………………2

Installation of the washing machine……………………………………………………….3

Unpacking the washing machine…………………………………………….. 3

General view of the washing machine……………………………………………………………3

Choosing a place to install the machine……………………….3

Adjusting the height of the legs……………………………………………………….. 3

Removing the transport bolts………………………………………………………4

Connecting the water supply hose…………………………………..4

Placement of the drain hose……………………………………………………4

Loading and washing laundry…………………………………………….. 5

General view of the control panel……………………………………………………………. 5

First wash of clothes………………………………………………………………………………… 6

Setting the washing mode manually……………………………………………. 6

Loading fabric softener into the washing machine……………………6

Washing tips………………………………………………………………………………… 7

Caring for your washing machine……………………………………………………………. 8

Restoring functionality of frozen

washing machine…………………………………………………………………………………..8

Cleaning the external surfaces of the washing machine…………………..8

Cleaning the debris filter………………………………………………………8

Cleaning the mesh filter of the water supply hose……………………8

Troubleshooting……………………………………………………….9

Problems and their elimination………………………………………………………..9

Explanation of error messages………………………………………..9

Washing program table……………………………………………10

Applications………………………………………………………………………………11

Description of symbols on clothing labels………………………………….11

Electrical Warnings

safety………………………………………………………………………………………..11

Environment protection……………………………………………………. eleven

Statement of Compliance……………………………………………………11

Technical specifications…………………………………………………… 12

COPE N0: RS68-00872D-04

  • Washing machine user instructions Before using the washing machine
  • Safety Instructions • SAVE THESE INSTRUCTIONS
  • Unpacking the washing machine
  • General view of the washing machine
  • Choosing a location to install the machine
  • Leg height adjustment
  • Removing Shipping Bolts
  • Placement of the drain hose
      Hook on the edge of the sink
  • Insert into sink drain outlet
  • Insert into the drain pipe of the sewer riser
  • General view of the control panel
  • Setting the washing mode manually
      When the wash cycle has finished:
  • Loading fabric softener into the washing machine
  • Washing Tips
  • Restoring the functionality of a frozen washing machine
  • Cleaning the external surfaces of the washing machine
  • Cleaning the debris filter
  • Cleaning the water hose strainer
      To clean the filter:
  • Problems and their solutions
      Before contacting the service center:
  • Electrical Safety Warnings
  • Environment protection
  • Statement of Compliance
  • Specifications
  • Troubleshooting questions for SMA Samsung S1021

    _____________________________________________________________________________

    _____________________________________________________________________________

    • All SMA Samsung models

    Samsung Fuzzy S1021 washing machine in operation (load 3.5 kg). It washes fine, but when it comes to spinning and draining, that's where it ends. The lights on the panel light up and there is silence, no further actions or sounds occur. This does not always happen, for example, today I washed one wash normally, but again did not spin the next one. I disassembled the drainage system, everything was clean (I thought maybe it was clogged). Sometimes it sits for a while and then starts working again. Change the pump. The day before, the Samsung Fuzzy S1021 washing machine worked fine, although something crunched there. Today I turn it on - it doesn’t turn on - the panel doesn’t light up. I take off the cover, remove the control panel - I hoped that there were some fuses there. There are no fuses. I pulled out and inserted the plugs onto the control panel - 0 reactions. I felt the plug that leads to the voltage with an indicator - electricity comes on. I put it back together, turned it on, and the panel started working. I saw that the lid of the washing machine was placed incorrectly, disconnected from the power supply, and rearranged it. It won't turn on again. Just in case, I cleaned the water filter (pressure is applied) and at the bottom of the filter - there was a piece of plastic wound around the impeller (maybe it was noisy the day before). It won't turn on again and the LEDs won't light up. Yes, you need to check not with an indicator, but with a tester: the indicator shows the presence of a phase, but how can you check zero? We take the tester and start checking from the plug to the module. The belt broke (I found it under the washing machine on the floor). It is necessary to raise a new question accordingly. What belt (brand, where to get it in St. Petersburg) is suitable for such a washing machine and, if possible, indicate a manual on how to replace the belt (or here in a nutshell, if this is not difficult). A belt of any brand marked 1270 J3 will do; you can put it on over the top by removing the top cover. Malfunction of the Samsung S1021 automatic washing machine with a load of 3.5 kg. Stop, drum (do not spin). When starting the SMA, the electronics seem to be all working (full cycle) from loading water to draining, only the drum stands and does not spin (the belt is intact), I suspect that the engine has burned out. Tell me, maybe something else needs to be checked? Maybe I missed something? Pay attention to the integrity of the wires on the motor terminal block. I dismantled the forecastle. Please help me with the following information: Bearing No.; Oil seal no. Bearings 6203-2RZ.LGHT3 17Х40Х12, 6204-2RZ.LGHT3 20Х47Х14. Oil seal 25x50.55x10. Washing stops periodically at 40C. The problem is the following: for some time now this effect has begun to appear - at a temperature of 40 degrees, the wash “freezes” almost immediately after starting - while the two rows of LEDs on the left begin to blink simultaneously. And that's all - only turning off the power helps. But with 60 degrees the problem practically does not manifest itself - what does that mean? In theory, at 60 degrees more current is consumed if the problem is poor contacts. It doesn’t even heat up anymore and the water is constantly leaving - that is, it is being collected and drained at the same time. In fact, only spinning works. Look for errors - when two rows of mode LEDs blink - emergency mode. Diagnostics using temperature LEDs. There is limited decoding in the instructions. First, remove the hose from the drain and hang it on the edge of the sink or bathtub. The car is seven years old. When pouring water, water flows from under the dispenser lid; the washing machine is positioned correctly. I tried to seal it with sealants, but it didn't work out well. Can this be fixed and what is the general reason? This is a frequent breakdown on Samsung, if cleaning the filler holes with a brush does not help, it can be treated by replacing the cuvette assembly. Washing machine Samsung S1021. There was a problem with engine rotation in all modes. When you turn on the engine, it accelerates for three seconds. The module then produces a low humming noise and the motor relay turns off. And the SMA freezes in silence. Doesn't give any error message. Please tell me what resistance the electric motor tachogenerator should have (according to my measurements, 9 ohms). This is suspicious. Maybe someone has encountered a similar problem? Check the reverse relay on the block. The washing process takes place, water is collected and immediately thrown out. I called the technician and said: “change the control module,” maybe something else? You need to check the level sensor, and other peripheral devices, and only then you can work on the module. Samsung S1021 washing machine malfunction. Doesn't turn on, no power. She washed and washed and stopped. I noticed in the evening that there was water and a ruble inside (I forgot to check my pockets), I climbed into the filter, plugged it in cleanly, once several buttons flashed, probably like at the start, very quickly and not for long, and went out, no longer turns on at all. used 4 years. You need to check: plug and socket; network filter; transformer in the module. When you turn on the machine, it immediately drains soapy water onto the floor. No water enters the drum, the laundry is dry. We checked everything, the pipes have not come off, the filters are normal. What could it be? Look poorly - the hopper-dispenser-tank pipe, the tank-drain pump, the drain hose, and the tightness of the tank itself - look. Sometimes the heating element falls out of the mounting hole in the front part of the forecastle. The following happens: the machine takes a long time to fill the water, no water appears in the drum, you can hear the water draining by gravity into the sewer. Then the washer turns the drum a couple of revolutions, again tries to draw water, and so on five times, then an error lights up (which one I didn’t write down exactly). What can be wrong? Perhaps this appeared due to the fact that before that I started it without water (the cold water in the house was turned off). Hang the drain hose on the edge of the bathtub or sink and everything will work. Strong vibration during spin cycle. The drum was overloaded so much that it jammed during washing. During the next washes, during the spin cycle there is a strong knocking sound (the unit moves out of place). It washes normally without spinning. Have the fasteners come off? bearings? Where to look? The knocking continues even when draining the water, when I wash, I select “no spin” and put foam rubber behind the drum - it gets better. Then the belt broke and when opening it, I discovered that the drum crosspiece, onto which the belt is placed, moves unevenly, i.e. when twisting, it either approaches the drum or moves away. Is this the cause of the vibration during the spin cycle? How to fix it? This is not a spider, but a drum pulley. What you are describing is similar to the failure of the bearings, if so they need to be changed (along with the oil seal, of course).

    _____________________________________________________________________________

    _____________________________________________________________________________

    _____________________________________________________________________________

    _____________________________________________________________________________

    Troubleshooting and breakdowns in the Samsung SMA Need advice on how to repair the Samsung WF 7452S9 R washing machine. The following happened: the automatic plug breaks when starting the rinse or wash program modes. Read more

    How to troubleshoot problems with Beko WMN washing machines. Washing machine WMN 6510 N. When spinning, the tank begins to shake violently and the rubber cuff of the tank begins to slam. At the very beginning of operation in October 2002, the same thing happened. Called the master Read more

    Problems with Bosch WLG washing machines - Repair recommendations When the WLG20265OE washing machine operates in any mode (spin, rinse, wash) when setting any speed (100-1000), the machine reaches maximum speed Read more

    Questions about operation, malfunctions and service of the AEG SMA I have an AEG AMS 7500i (narrow) machine. When washing, a squeaking (grinding) sound occurs, similar to the squeak of rubber. What could this be and could it cause it to break? What you need Read more

    Tips for troubleshooting SMA Ardo SMA SE 1010. It rattled in the pump area, the laundry came out wet. A coin was found in the filter. I removed and disassembled the pump. It turned out that the rotor is something like Read more

    Questions about the operation and breakdowns of the Siemens ACS In operation WM10N040OE. When water is drawn into the drum, when turned on, water immediately begins to flow from below. I checked the hoses - they are intact, but they are leaking from all sides. Please tell me what the problem is and how Read more

    Problems, adjustments and settings of Whirlpool AWG washing machines Model AWG 223. Was washed for 2 years without problems. Now I have stopped spinning in the rinse-spin mode, just spin. Haven't tested it in other modes. The drain pump is heard, the drum is spinning, but Read more

    Recommendations for troubleshooting in SMA Atlant The Atlant 50C81 washing machine is in operation. Instead of rinsing, I accidentally turned on the express wash and, already during the cycle, tried to switch to rinsing without stopping the unit Read more

    Rating
    ( 2 ratings, average 5 out of 5 )
    Did you like the article? Share with friends:
    For any suggestions regarding the site: [email protected]
    Для любых предложений по сайту: [email protected]