Bearings are important elements of a washing machine. They contribute to the controlled and silent rotation of the drum. Usually their breakdown is unnoticeable at the initial stage, so the user learns about problems with the bearing assembly much later, when an unnatural loud sound is heard during operation of the machine (especially during the spin stage). Ignoring the malfunction can lead to disastrous consequences: damage to the tank and complete failure of the unit. We'll figure out how to replace a bearing on an Indesit washing machine in our article.
Bearings are important parts of a washing machine.
What bearings are included in the Indesit SMA? Symptoms of a problem
It must be said that the main reasons for wear of moving components are improper operation and natural wear. So that you can avoid unpleasant breakdowns in the future, we list these reasons:
- Drum overload with laundry. If your washing machine is designed for a load of 5 kilos, this does not mean that you need to fill it to capacity. Correctly load 2/3 of the total volume of the drum. Otherwise, the parts are subject to increased load, which leads to rapid failure.
- Incorrect housing installation. When the MCA is not level, it shakes violently during the spin cycle and the vibration increases. All this negatively affects the moving parts of the machine. Make sure that the washer is stable on the surface.
- Seal wear. Manufacturers claim that the oil seal service life is on average 5 to 6 years. When the O-ring loses its seal and leaks, water washes away the lubricant, causing the internal components on the shaft to begin to wear out.
Before replacing a part, select a new replacement. So, for the Indesit models IWSB 5085, IWSC 5085, bearings with different serial numbers can be used. To figure out which SM is suitable for your SM, look at the table.
You can find out how much a repair kit costs on the Internet or on the manufacturer’s website. It is best to select original spare parts. They will definitely fit your model. The kit includes 1-2 bearings and an oil seal. All elements are replaced at once, otherwise there is no point in carrying out repairs.
The wear of the driving units on the shaft is difficult to confuse with something else. Its companions are creaking and grinding sounds when the drum rotates. There may be signs of wear on the back wall of the tank. Let's start disassembling.
Replacing the bearing in the drum of an Indesit washing machine with your own hands
Before changing a part, prepare for disassembly. What tools are needed:
- Phillips and slotted screwdrivers.
- Open-end wrenches.
- Socket heads and wrenches.
- Wooden block.
- Bit.
- Pliers.
WD-40 fluid will also come in handy. It will help deal with stuck fasteners.
Replacing the bearing of an Indesit washing machine requires complete disassembly of the equipment. For this you need free space. If it is not possible to take the machine to the garage, then move the body to the center of the room.
- Remove the plug from the outlet, unplugging the machine.
- Close the water supply valve.
- Disconnect the inlet hose from the housing. Immediately place it in a sink or container to drain the water.
Place the SMA in the center of the room. Take out the powder dispenser because moisture will accumulate inside it. Also remove the drain filter.
It is located under the loading hatch. Wait for the liquid to drain and proceed to disassembling Indesit IWSC 5105, WISL 102.
Video
In the video below, you can once again familiarize yourself with the procedure for replacing the bearing on Indesit washing machines.
Mom,” wife and just a happy woman. She draws inspiration from travel and cannot imagine life without books and good films. She strives to become an ideal housewife and is always ready to share her experience.
Found a mistake? Select it and click the buttons:
In the 19th century, washing ladies' toilets took a lot of time. The dresses were first ripped open, and then each part was washed and dried separately so that the fabric did not become deformed. After washing, the clothes were sewn again.
For washing small items on the road or in a hotel, it is convenient to use a regular plastic bag. Socks or tights are kneaded inside a tied bag along with water and a small amount of detergent. This method allows you to pre-soak things and wash them without damaging the fabric or wasting a lot of powder and water.
There is a washing machine “for bachelors”. Linen washed in such a unit does not need to be ironed at all! The thing is that the device does not have a drum: some things can be placed inside the container directly on hangers (for example, jackets and shirts), and smaller things (for example, underwear and socks) can be placed on special shelves.
Washing machines equipped with the “No Iron” or “Easy Iron” functions can wash clothes with little to no wrinkling. This effect is achieved through a special approach to spinning - it is performed at low speeds, with long pauses, and a small amount of water is retained in the tank.
The first officially patented washing machine was made of wood and was a box with a frame, half filled with wooden balls. Laundry for washing and detergent were loaded inside and the frame was moved using a lever, which, in turn, made the balls move and grind the laundry.
The expression “soap opera” (“soap”) did not arise by chance. The very first series and shows that had a female audience were broadcast on television at a time when housewives did cleaning, ironing and laundry. In addition, to attract female viewers to the screens, commercials for detergents: soaps and powders were often played on air.
Astronauts, while in Earth orbit, solve the problem of dirty things using an original method. Clothes are dropped from the spacecraft and burn up in the upper atmosphere.
History knows the fact that a kitten fell into the drum of a washing machine and, after going through a full wash cycle on the “Wool” program, got out of the unit unharmed. The only trouble for the pet was an allergy to washing powder.
Washing machines have something to do with the origin of the expression “money laundering.” In the 1930s, American gangsters used a network of laundries as a cover for their illegal activities. By passing off the proceeds of crime as proceeds from cleaning clothes, they turned “dirty” money into “clean” money.
Bearings are important elements of a washing machine. They contribute to the controlled and silent rotation of the drum. Usually their breakdown is unnoticeable at the initial stage, so the user learns about problems with the bearing assembly much later, when an unnatural loud sound is heard during operation of the machine (especially during the spin stage). Ignoring the malfunction can lead to disastrous consequences: damage to the tank and complete failure of the unit. We'll figure out how to replace a bearing on an Indesit washing machine in our article.
How does a bearing work?
In the standard assembly, two bearings are installed inside the washing machine, which connect the drum and pulley.
These parts have different sizes, the large bearing is located near the drum and carries a fairly high load.
The small one is located at the opposite end of the shaft.
With the help of bearings, the washing machine drum rotates evenly when performing the program and additional functions.
Causes of wear
If you have a breakdown, that is, not even 5 years have passed from the date of purchase, then most likely this happened due to :
- constant overload of laundry, hence imbalance during operation and premature wear of components;
- a damaged oil seal, which protects the bearing from water penetration thanks to lubrication. If the seal is leaking, water will seep in and wash away the lubricant, causing the bearing to corrode and break.
External signs of bearing failure:
Also, you can twist the drum, if you see any play between the drum and the tank, then you should be wary.
The nuances of performing work on machines from different manufacturers
To repair some models from individual manufacturers, you need to know about the nuances determined by the design of these units. Washing machines of such brands as Indesit and LG, Samsung and Atlant have such features.
"Indesit" (Italy)
When repairing cars of this brand, it is initially necessary to clarify the design of the tank, because it may be different. New models are produced with a non-separable tank, and older ones with a collapsible one.
This determines the volume and sequence of operations performed. In addition, on some models the pulley mounting screws may have left-hand threads (W 84 TX), which must be taken into account.
If the brass bushing installed on the axis of the drum cross is damaged, it must also be replaced when performing such work. Also, models of this brand provide for double fastening of the drum axis, which is a certain nuance that should be remembered. The presence of a self-positioning sensor, which must be turned off when dismantling the drum, is another feature that you should know when doing the work yourself.
"LG" (South Korea)
For washing machines from this manufacturer, the tank is removed from the front of the device body. Modern models of this brand have improved technical characteristics that allow you to wash a significant amount of laundry in one load. Therefore, such devices are equipped with a tank that is quite heavy, which makes it somewhat difficult to carry out the work described.
In addition, when disassembling the drum, you should pay attention to the mounting unit for the electric motor, which is somewhat different from the type of mounting used by other manufacturers.
Samsung (South Korea)
The design of washing machines of this brand also involves dismantling the tank through the outer wall
When working with Samsung washing machines, you should be especially careful when knocking out the bearing, because If the bushing is damaged, the entire drum will have to be replaced. In addition, a distinctive feature of this brand is the use of two bearings of different sizes on one shaft
In this case, the larger one is knocked out from the outside towards the tank, and the smaller one from the inside.
In addition, a distinctive feature of this brand is the use of two bearings of different sizes on one shaft. In this case, the larger one is knocked out from the outside towards the tank, and the smaller one from the inside.
"Atlant" (Belarus)
For machines of this brand, the drum is removed from the rear side, which is provided for by their design. The tank on Atlant brand machines is of a collapsible type, so there is no need to saw it when replacing bearings.
When assembling the tank, it is necessary to use a sealant, this will provide more reliable protection against leakage.
Replacing bearings for an Indesit washing machine
When choosing bearings for a washing machine in a store, take the worn parts with you first so as not to miss. If you buy online, make sure that the selected bearing actually fits your Indesit. Prices can also be found on the Internet or by phone.
Tools for disassembling the Indesit washing machine
Replacing the bearing of an Indesit washing machine with your own hands is not so difficult. The main thing is to get the bearings themselves, which will require disassembling the entire machine. Please be patient and have the following tools:
- Phillips and flat screwdrivers;
- socket and open-end wrenches;
- hammer;
- bit;
- hacksaw;
- pliers;
- WD-40 lubricant;
- glue and finally replacement parts.
Disassembling the washing machine
Free the pump filter from water (below the hatch, under the front panel) - unscrew it and pour out the water. Next, move the device being repaired away from the wall for further work.
Common replacement mistakes
Please carefully study the following recommendations so that replacement does not become an expensive repair:
the pulley is broken, you can’t pull it, just rock it slightly to the sides and pull lightly;- breakage of the bolt heads; if the bolt does not fit, spray WD-40;
- break in the temperature sensor wire, be careful with the tank lid;
- the moving unit is damaged;
- The gasket of the moving unit has not been replaced;
- All sensors and wires are not connected during assembly.
So, you are convinced that replacement is quite a labor-intensive task, but doable if you have at least a little experience working with equipment.
Source
