IKEA's assortment includes only 7 models of dishwashers (DM). They differ in price, technical characteristics, and also in quality. Some buyers shared their experience of using the equipment, and we will make our rating of the best models from the catalog, taking into account all the nuances.
IKEA dishwasher “Lagan” series, RUB 19,999. Full size 60 cm.
IKEA dishwashers were created with the participation of such well-known companies as Electrolux, Whirlpool.
The catalog contains:
- full-size PM: “Lagan”, “Rengyora”, “Skinande”, “Renodlad”, “Highienisk” series;
- narrow (45 cm wide) PM: Elpsam, Medelstor series.
“Skinande”, full size 60 cm.
Note. If you are also planning to buy a kitchen set from IKEA, then keep in mind that only IKEA appliances are suitable for a special cabinet for built-in furniture. A dishwasher from another brand does not have special slider mounts.
What brand is IKEA?
IKEA is a company with Swedish roots.
Its full name is IKEA International Group. Owns the largest retail chain that sells furniture and household goods. IKEA kitchens are versatile, mobile and practical furniture. This is a kind of construction set from which you can assemble a kitchen set according to your needs. A modular kitchen allows you to assemble sets of different layouts and functionality.
IKEA sells not only furniture, but also various household appliances, including dishwashers (DMM). The dishwasher manufacturer is Swedish. It is interesting that the warranty for such equipment is 5 years, while dishwashers manufactured under the Electrolux brand name are only guaranteed for 1 year.
Differences between Ikea dishwashers
The main feature of Ikea PMM is the limited range of equipment produced: there are only 7 models. The machines were created with the participation of specialists from well-known manufacturers of washing machines Electrolux and Whirlpool.
Features of Ikea dishwashers are as follows:
- PMMs were created for complete integration into production furniture. It is difficult to install machines from other brands into the headset: they do not have special slider mounts (with a sliding hinge).
- The devices comply with European standards and have a full range of functions. All of them are built into furniture sets, the dishwasher door is decorated to match the facade of the cabinets.
- The price range of the Ikea PMM is from 20 to 50 thousand rubles: the more expensive the device, the more capabilities it is equipped with.
Conclusions and useful video on the topic
This video will help you understand the advisability of buying a dishwasher:
A short video about the features of Ikea built-in dishwashers that you need to know for proper installation of the machines:
The Ikea model range includes 7 machines of different sizes, spaciousness, functionality and noise levels. In order not to overpay for bells and whistles, before purchasing you need to decide on the minimum required functions. Why pay 40 instead of 20 thousand rubles if your family of 2-3 people uses only two programs?
Do you have experience using an Ikea dishwasher? Please share with readers your impressions of the work of the kitchen assistant, tell us about the nuances of its connection, operation and maintenance. Leave feedback, comments and ask questions - the contact form is below.
How to integrate PMM of the same brand into an IKEA kitchen
The IKEA dishwasher can be placed in any way - under the countertop, in a closet or in any other convenient place. When installing the device, you should take into account that there should not be more than 1.5 m to the drainage point - so that the pump does not overload when pumping out dirty waste.
Embedding order:
The machine is inserted into the cabinet, leading communications through holes in the walls. By adjusting the legs, the device is leveled. Remains only:
- connect the hose to the water supply system;
- crash into a sewer system;
- connect the wiring to the electrical panel or directly to the outlet.
Now you can perform the first launch. Do this without utensils. But you need to add detergent to wash the inside of the device and get rid of technical odors.
Types of sinks according to different criteria
A large number of manufacturers of dishwashing equipment, numerous model ranges and series of each manufacturer have necessitated their systematization according to individual characteristics. There are several classifications of dishwashers. Here are the main types:
- Scope of application, purpose: household and industrial dishwashers. Ikea does not produce the second type.
- Dimensions. On this basis, full-size, narrow and small cars are distinguished. All models from Ikea belong to the first two types: the company does not produce small-sized PMMs.
- Installation location. There are three types of devices: free-standing, fully or partially built-in. Ikea produces washing equipment only for the furniture it produces. All dishwashers in the model range are devices that are completely built into the kitchen set.
There is also a division into levels of placement of machines - floor and tabletop options, which applies to small devices not produced by the company. Full-size PMMs can be combined - combined with gas or electric stoves, but there are no such designs in the IKEA assortment either.
Features of the PMM brand
There are a number of characteristics that immediately distinguish IKEA household appliances from analogue products on the market:
- Dishwashers were developed by specialists from such famous brands as Electrolux, Whirlpool, so you can be sure of exceptional quality.
- Special compartments for storing fragile glasses and other items.
- Availability of special rubberized holders for glasses, bowls and other fragile or non-standard tableware.
- Economical consumption of water and electricity. Their energy consumption class is A or A+.
The warranty period for all IKEA household appliances is 5 years from the manufacturer.
Advantages and disadvantages
Users of an IKEA dishwasher highlight the following advantages of this brand:
- Each dishwasher meets all the characteristics stated by the developers.
- Availability of practical options and functions. There is nothing superfluous.
- Quiet operation of the equipment, allowing it to be used even at night.
- All necessary documentation included for safe connection and use.
- Compact and convenient compartments for storing dishes, glasses, and cutlery.
- Built-in models have standard dimensions for easy placement and installation.
Despite a lot of advantages, there are also disadvantages of IKEA household appliances:
- Insufficient cleaning of heavily soiled pans and enamel pots. This requires pre-soaking.
- After some programs, marks and stains remain on colored dishes.
Pros and cons of PMM from Ikea
The models are actively sold in Ikea brand stores, so quite a lot of reviews have accumulated. Among them there are positive ones, which characterize dishwashers only from the best side, and negative ones, which affect their weaknesses.
Users like the following:
- the machines fully meet the parameters declared by the manufacturer;
- economical washing programs (“Eco”, “Fast”) pay off;
- almost all options are convenient and actively used;
- there is nothing superfluous in the machines - only useful functions;
- quiet operation does not create a “noise curtain”;
- detailed documentation with characteristics and installation instructions;
- convenient sections for placing various utensils.
Embedding the model is easy, following the manufacturer's diagrams. The dimensions of the models are standard, so there are no problems with installation and connection.
Disadvantages often include poor cleaning of glass and ceramic items. However, white stains can be easily removed if you choose the right detergent.
There are complaints about insufficient cleaning of heavily soiled pans and pots. Such items must first be soaked, since the dishwasher’s power is not enough to completely clean them of burnt-on food, a thick layer of fat or colored stains.
Many are captivated by the long warranty period - 5 years (except for the Lagan model). If during this period any parts fail, the company undertakes to replace them free of charge - you won’t have to look for spare parts yourself.
How to use
The ease of use of IKEA brand machines is another important advantage. In order to understand how to use the PMM, it is enough to read the operating instructions in Russian, which are attached to the unit.
Basic rules of use:
- It is necessary to make sure that the connection and installation are correct.
- Make sure the water hardness and softener settings are correct.
- Fill the salt container according to the instructions.
- Pour the rinse aid into the special dispenser compartment.
- Open the water supply valve.
- Turn on the machine. On/Off buttons.
- Select the most suitable washing program.
- Load things into the workspace of the machine.
- Add the selected detergent to the special compartment.
- Enable wash activation.
Advantages and disadvantages
Ikea dishwashers have an attractive interface and a long service life. They are easily built into furniture according to the diagrams that are included in the manufacturer’s operating instructions for the washing machine. Users see advantages in the following indicators:
- high energy efficiency class – A, A+, A++;
- the machine parameters declared by the manufacturer fully correspond to the actual figures;
- options that are needed and in demand among consumers have been applied: no useless functions have been installed;
- Convenient adjustable baskets for placing different utensils, clamps for fragile glass.
Washing machines also have their disadvantages. Poor washing of pans and pots is noted. But this defect can be corrected by pre-soaking heavily soiled dishes before loading them into the working chamber. In addition, service stations are not available in all cities.
Have you set the water hardness in PMM?
Yes, of course. No.
Description of programs
If you are considering purchasing this dishwasher, information about the main modes will not hurt.
- 70°. Suitable for heavily soiled dishes. This cycle can be used to wash dishes, cutlery and large items such as pots and pans. Duration: 160-180 minutes. Water consumption is 14-40 liters. Includes pre- and main washing, rinsing and drying.
- 65°. For washing normal dishes and cutlery with average soiling. Duration: 130-140 minutes, water consumption - 14-45 liters. The work steps are similar to the previous cycle.
- 60° or 65°. Suitable for washing dishes and cutlery with fresh stains. Provides 2 stages: washing at one of the specified temperature conditions and rinsing. The program runs for 38 minutes. Water is consumed in a volume of 8 liters.
- ECO 50°. For normally soiled dishes without difficult stains. Duration: 225 minutes, standard water consumption - 13 liters.
- Pre-rinse - for all dishes. Lasts 14 minutes, consumes 4 liters of water.
What the user can configure
Some options can be adjusted independently:
- Start or stop the sound signal at the end of the wash cycle.
- Enable or disable the Auto Open option.
- Adjusting the water softener level based on water hardness.
The dishwasher “remembers” all entered settings the first time, so there is no need to make adjustments before each wash.
Customer reviews and ratings
When choosing a dishwasher, the buyer may be limited by budget. But even at a certain cost, he wants to see quality that matches his price.
Let's see which models customers gave the highest ratings and what pros and cons they noted during use.
Read my review of IKEA hoods: domed, built-in, suspended and inclined.
"Medelstor"
This 45 cm wide PM deserves the highest ratings (4.7 out of 5). There are some downsides, but nevertheless, this is the optimal model in terms of price and quality.
Pros: great functionality, quiet, cleans well even on a short program, economical in energy and water consumption, spacious, convenient loading, presence of the “indicator beam” function.
Cons: Doesn't clean the inside of pots and pans well.
"Elpsam"
Another narrow dishwasher rightfully takes second place.
Pros: cleans well, inexpensive, great functionality.
Cons: no “indicator beam” function, does not wash pots, noisy, does not dry well.
"Lagan"
This is the most budget-friendly dishwasher in IKEA today.
Pros: full-size and at the same time the cheapest, economical water consumption, simple controls.
Cons: no partial load function (needs to accumulate dishes), does not always wash well, noisy, no “delayed start” function.
"Skinande"
The dishwasher, which received a rating of 3 out of 5, has received a lot of negative customer reviews, but there are also those who were satisfied with its quality.
Cons: the heating element's fuses quickly burn out due to incorrect connection to the word (this is the most common fact in reviews), you have to turn on an additional rinse to wash off the remaining detergent.
Regarding the burnout of heating elements, as the most common complaint in reviews of this product, there is one important remark that was shared by one of the buyers.
Some buyers were generally satisfied with the quality of washing and drying and noted such positive aspects in its use as quiet operation, the presence of a “beam on the floor” function, the presence of a “delayed start” function, great functionality, and energy efficiency.
Malfunctions and their elimination
The developers have identified a number of possible malfunctions and methods for eliminating them:
- There is a small water leak through the door, or the door does not close well - the machine may not be level, the adjusting knives need to be tightened.
- The dishes loaded into the baskets protrude beyond the limits, you can hear the shaking and rattling of dishes and cutlery - you need to restart the machine in accordance with the recommendations suggested in the instructions.
- Immediately after switching on, the electrical fuse trips; this creates too much load on the electrical network; it is necessary to check the maximum load in the network allowed by the meter. You may need to turn off one of the appliances in your home.
- Damage inside the dishwasher - do not repair the device yourself, you must contact a service center.
- The fault code flashes, a beep sounds, the wash does not start - the water supply valve may be closed, there is not enough pressure in the system. It is necessary to check the tap and hose for plugs and blockages.
It is normal for the cycle to stop and restart several times during operation. This means that the optimal washing result is ensured in automatic mode.
All major problems must be repaired in a specialized service center so as not to aggravate the situation and not permanently break the device.
A dishwasher frees women from routine washing, allows them to get rid of heavy dirt on dishes, and provides antibacterial cleaning.
Built-in dishwashers in the lower price category
The lower price category includes the LAGAN DW60 and ELPSAM models.
The cost of these dishwashers will be 400-450 USD. Both dishwashers are built-in, which makes it easy to fit into any kitchen interior. When purchasing, you just need to take into account that additional parts for embedding, such as a door, tabletop, handles and plinth, are sold separately. The LAGAN DW60 model is suitable for a large family. In terms of its dimensions, it is close to the standard for this class of household appliances - 59.6x57.0x81.8 cm and is designed to wash a table set for 12 people. This indicator is very conditional and depends on what kind of dishes are loaded into the machine.
Article on the topic: Which direction does the vacuum cleaner motor rotate?
Shelves for plates and a height-adjustable upper basket allow you to effectively use the entire available volume. The machine is assigned the highest level of washing and drying, class A. The model is equipped with 3 programs that will allow you to clean dishes from various types of dirt with a consumption of 16 liters of water and 1.08 kWh of energy per standard washing cycle. In approximate terms for annual consumption, this figure will be about 4480 liters and 311 kWh.
LAGAN DW60 is equipped with rinse aid and salt indicators, which will warn you when the corresponding tank needs to be refilled. The specially developed “Aquastop” system will prevent water leakage.
the ELPSAM
model and the LAGAN DW60 is its size. The dishwasher belongs to the narrow class (44.6x55.5x81.8 cm) and is suitable for a small family of 3 people. The approximate capacity of this model is slightly smaller (dining set for 9 people), but the presence of 5 washing programs more than compensates for this. Energy and water consumption per year is also less in comparison with ELPS and amounts to 249 kWh / 3640 liters, respectively.
The configuration of this model includes 2 folding shelves for cups and 2 folding stands for plates, which will allow you to arrange the dishes more compactly.
Otherwise, it has the same functions and qualities as LAGAN DW60 .
User reviews
We will provide detailed reviews from real users so that you can form the clearest idea about the technology.
Sofia, Moscow
This is my first dishwasher - I'll be honest. Previously, I was against automation; I thought that nothing could be washed better than by hand. I also thought that such a device “eats” a lot of electricity and water and breaks the dishes.
My friends convinced me - I came to visit a couple of times and saw sparkling dishes and listened to enthusiastic speeches about the “helper”. I wanted it for myself too. But, essentially. So here are the advantages:
- Different temperature conditions.
- Very roomy.
- Quiet operation.
- Doesn't break plates.
- Can be washed with salt or 3-in-1 tablets. I'm more impressed by compressed station wagons.
- The quality of washing varied - more often good than bad. In general, it all depends on the detergent.
Three years later, the first malfunctions began - I can’t say exactly what they were, something with the electronics. They didn’t refuse service; they began to repair it. It took almost a month. It was then that I realized how important this machine was to me and how I had gotten out of the habit of washing, cleaning and scrubbing all these kitchen utensils.
2 months passed - and another breakdown. And again, I can’t say what the glitch was, because the master didn’t tell me (a woman) much about the details. As a result, we decided to buy a machine of a different brand. As you can see, it’s not the most reliable technology, but since it’s my first, the memories are fond and positive. But objectively speaking, I don’t recommend buying it.
Eleanor, Perm
We bought this car a long time ago and were only dissatisfied with the noisy operation. It feels like they saved a lot on thermal insulation, because you can directly hear the water flowing down the walls.
Alla, Moscow region
It’s terrible - the dishes on top are half dirty when they come out! Cleans well only from below. I use very good, imported products - and still I’m so disappointed. I don’t know how to return the equipment now, because we don’t have Ikea, we need to go to the capital with the hope that they will accept it.
Let's summarize all of the above. The joint brainchild of two well-known giants of household appliances and a Swedish company turned out to be quite good in terms of description and characteristics, but there are not many satisfied users. We can only hope that the manufacturers have corrected the design flaws and the new models are much better than their predecessors. Good luck with your choice!
Sources
- https://cosmo-frost.ru/posudomoechnye-mashiny/kak-ustanovit-posudomoecnuu-masinu-v-kuhnu-ikea/
- https://washergid.com/posudomoechnye-mashiny-ikea-obzor-sushhestvujushhih-modelej
- https://RemontCMA.ru/posudomoechnye-mashiny/vidy-posudomoek/vstraivaemye-modeli-pmm-ikea/
- https://Tehno.expert/posudomoechnaya-mashina/ikea.html
- https://cosmo-frost.ru/posudomoechnye-mashiny/brendy/obzor-posudomoechnyx-mashin-ikea-ikea-ustrojstvo-otzyvy/
- https://cosmo-frost.ru/posudomoechnye-mashiny/brendy/vstraivaemaya-posudomoechnaya-mashina-elpsam-xarakteristiki-otzyvy/
Who produces PMM IKEA
The main principle of the famous Swedish company, founded in 1943, is democracy. Democratic design, reasonable prices, high quality products for any country in the world. To implement this condition, a complex system of logistics, production, and quality control was created. The label of a product purchased at IKEA may say not only “made in Sweden,” but also “in Russia,” “Bulgaria,” “Brazil,” “China,” “Poland,” and many other countries. But, despite such internationality, the final production result must always meet the requirements of the head office, which is located in Delft (the Netherlands).
The developers of the Electrolux and Whirlpool brands, known for their reliability and high technology, had a hand in the creation of IKEA household appliances. Therefore, you don’t have to worry about the quality of the dishwasher. You just need to choose the right model.
Rules for loading certain types of dishes
Drinkware. As we already know, it is placed on the top shelf. Turning upside down, cups and glasses are placed at a slight angle. The glasses are fixed on holders. So, water flows freely and does not linger in the container.
Plates of different sizes are placed on different trays. Inverted saucers, bowls, tureens and bowls, slightly tilted, are fixed at the top. Flat products are placed on the bottom shelf with the front part towards the center: the larger the diameter, the closer to the edge.
Pots, pans, and stewpans are loaded upside down into the lower tray. Try to arrange them so that the handles do not interfere with other utensils. It is more convenient to place removable elements separately.
Table knives, forks and spoons are placed horizontally on a special tray or vertically in a basket. In this case, the first ones should stand with the handle up, and the forks and spoons should be down. It is recommended to install the devices mixed, so they will not block each other.
Kitchenware. Ladles, spatulas, and masher are placed horizontally at the bottom or on the cutlery shelf. Cutting boards are installed vertically. Please note that wood and some plastics are not dishwasher safe.
IKEA dishwasher repair
A Dutch manufacturing and trading group of companies with Swedish roots, IKEA takes on the task of creating the ideal turnkey home space, offering everything down to built-in appliances. IKEA does not produce dishwashers , but sells machines from partner companies. These are well-known world brands: Whirpool, Electrolux and others. Assembly is carried out in Germany, Hungary and other EU countries.
IKEA dishwashers are mainly built-in, in accordance with the interior design. The company thoroughly tests its equipment and guarantees that it meets the highest standards of quality and safety in domestic use. IKEA provides a free 5-year warranty against material defects or manufacturing defects on all household appliances, except for products from the Nedisad, Lagan, etc. series.
Quick online diagnostics of dishwasher faults (Simply select a problem from the list and find out the approximate breakdown)
Most modern IKEA dishwashers have the function of displaying an error code when certain malfunctions and malfunctions occur. You need to know the manufacturer
dishwasher.
Manufacturer
can be identified by the five-digit number indicated on the label:
- Whirlpool - 18535, 23256
- Electrolux - 21552
It is also necessary to determine the article and service numbers
from the label.
If the sticker has a number starting with the number 9 (9-11 characters), then it is Electrolux.
If the number starts with 85 (12 characters), then it is Whirlpool.
They are located on the inside of the door or in the operating instructions.
Understanding what the error code means , you are able or breakdown yourself
For your convenience, we present a list of error codes for IKEA dishwashers ( Whirlpool, Electrolux ) with an explanation of each specific code . The table also includes a description of the error, the reasons for its occurrence and possible solutions.
When carrying out repairs yourself, remember your safety!
Disassemble without disconnecting the equipment from the mains!
It is best to use the services of an experienced technician who is familiar with any problems and can fix the problem. If your dishwasher breaks down, entrust the repair to a professional: he will be able to perform all the steps quickly, efficiently and safely.
Whirlpool dishwasher error codes
Not all codes are available in the normal operating mode of the device; many of them are shown only in a special service (test) mode.
| Error code | Description of the error | Causes and elimination |
| For models without a display, the error code is displayed by a set of lit and flashing LED indicators. The names of the indicators used to display the error message. Pre-wash - pre-wash. 45° - quick wash of lightly soiled dishes. 55° - normal washing of lightly soiled dishes with dried food. 65° - normal washing of heavily soiled dishes with dried food. 70° - intensive washing of heavily soiled dishes. 0—off, 1—on, 2—flashing. Errors E1-E4 terminate the current program, E5, E6 interrupt and after the problem is resolved, the program resumes. To reset the error message, you need to open/close the door or turn the machine off and on. | ||
| E1 10002 | Water leakage from the tank, overflow, leak. | A signal was received from the float of the Aqua-Stop leak control system, which indicates the appearance of water in the sump. 1. Carefully inspect all places where there may be a leak. 2. The drain pump is leaking. 3. The water leakage control sensor is faulty or there is a short circuit in its circuit; check all wiring and contacts from the sensor to the control board. 4. The error may appear after replacing the electronic control module; in this case, restarting the machine helps. |
| E2 01002 | There is a risk of overflow and leakage of water from the tank. | The water level limiting system in the car has worked; it is necessary to check all the components and parts that could cause this to happen. 1. The water level sensor does not work; check the wiring between the sensor and the control unit. 2. The water level sensor is faulty. 3. Fill valve is faulty. 4. Water does not drain or leaves the tank too slowly, See error description E6 |
| E3 11002 | The water does not heat up and takes too long to heat up. | Either water heating does not start at all due to problems with signals from one of the sensors or the heater, or the heating time has exceeded the permissible limit. 1. One of the sensors, the temperature sensor (thermistor) or the water level sensor (pressostat) is faulty 2. Too much water has been poured into the tank (for example, due to a faulty level sensor) 3. The temperature sensor (thermostat) is not working correctly 4. An open circuit heating element control. 5. Short circuit in the heating element circuit, leakage to the housing. 6. The heating element burned out. 7. Problems with the control controller. |
| E4 00102 | There is no signal from the temperature sensor. | There were problems heating the water due to a faulty temperature sensor. 1. Make sure that the wiring between the sensor or heating element and the control controller is in order. 2. The absence of a signal from the sensor may indicate its malfunction. 3. Problems in the control controller. |
| E5 10102 | Problems with water collection: the tank does not fill in the required period of time. | There are many possible reasons. 1. Water does not enter the machine. 2. The door is not closed tightly and the machine blocks the start of the washing program. 3. The inlet solenoid valve is broken. 4. The water level sensor (pressostat) is faulty. 5. There is a break in the wiring or the contacts in the circuits have come loose from the control controller to the inlet valve or pressure switch. 6. Management controller failure. |
| E6 01102 | Water does not drain well from the chamber. | There can be many reasons for drainage problems. 1. Defect or clog in the drain hose. 2. Blockage in the pan. 3. The drain filter is clogged. 4. Incorrect drain connection. 5. The drain pump is clogged; there is a lot of dirt on its blades. 6. Problems with the drain pump, leakage or breakdown 7. Open circuit in the power supply circuit of the pump or pressure switch. 8. The pressure switch is broken. 9. Failure in the control module. |
| For Whirlpool models with the "F" prefix. For models without a display or with a 1-character display, the error code is set by the number of blinks of the START LED in the following sequence: N blinks - pause of 1 second, where N is equal to the error code from 1 to 15 (hexadecimal 'E'), error F0 corresponds to 10 blinks, FA - 11 blinks (this is a slight difference from hexadecimal notation, where A is 10) The error code, even with a display, is always accompanied by a blinking START LED. | ||
| F0 10 | The sensor is faulty. | The error is issued only in service mode and only if there is a contamination sensor in the car. 1. The sensor is very dirty. 2. The circuit between the sensor and the electronic unit is broken. 3. The absence of a signal from the sensor may indicate its malfunction. 4. Failure in the control controller. |
| F1 1 | Problems with the temperature sensor. | The temperature sensor returns an incorrect value (below -3°C or above +85°C) or does not receive a signal at all. There were problems heating the water due to a faulty temperature sensor. 1. Make sure that the wiring between the sensor or heating element and the control controller is in order. 2. The absence of a signal from the sensor may indicate its malfunction. 3. Problems in the control controller. |
| F2 2 | Leak. | The Aqua-Stop system sensor has detected an unacceptable water level in the pan of the machine: the fill valve is blocked and the drain pump is turned on until the situation normalizes. 1. Carefully inspect all places where there may be a leak. 2. The drain pump is leaking. 3. The water leakage control sensor is faulty or there is a short circuit in its circuit; check all wiring and contacts from the sensor to the control board. 4. The error may appear after replacing the electronic control module; in this case, restarting the machine helps. |
| F3 3 | The water in the bunker heats up too slowly. | An error is displayed if within 25 minutes. the water temperature does not reach the value set in the washing program. Either water heating does not start at all due to problems with signals from one of the sensors or the heater, or the heating time has exceeded the permissible limit. 1. One of the sensors, the temperature sensor (thermistor) or the water level sensor (pressostat) is faulty 2. Too much water has been poured into the tank (for example, due to a faulty level sensor) 3. The temperature sensor (thermostat) is not working correctly 4. An open circuit heating element control. 5. Short circuit in the heating element circuit, leakage to the housing. 6. The heating element burned out. 7. Problems with the control controller. |
| F4 4 | Slow drainage of waste water. | The error appears if within 4 minutes. There is still water in the tank. There can be many reasons for drainage problems. 1. Defect or clog in the drain hose. 2. Blockage in the pan. 3. The drain filter is clogged. 4. Incorrect drain connection. 5. The drain pump is clogged; there is a lot of dirt on its blades. 6. Problems with the drain pump, leakage or breakdown 7. Open circuit in the power supply circuit of the pump or pressure switch. 8. The pressure switch is broken. 9. Failure in the control module. |
| F5 5 | The sprinkler does not work due to blockage. | The rotation speed of the sprayer is checked at each stage of the washing program. 1. Dishes in the chamber are blocking the rotation of the spray arm. 2. An open circuit in the sensor circuit that determines the rotation speed of the sprayer. 3. The sensor is faulty. 4. Problems with the control controller. |
| F6 6 | No water supply. | An error is displayed if there are no signals from the flow meter when the fill valve is open, or the water sensor indicates that the tank is empty. There are many possible reasons. 1. Water does not enter the machine. 2. The door is not closed tightly and the machine blocks the start of the washing program. 3. The inlet solenoid valve is broken. 4. The water level sensor (pressostat) is faulty. 5. There is a break in the wiring or the contacts in the circuits have come loose from the control controller to the inlet valve or pressure switch. 6. Management controller failure. |
| F7 7 | The water flow meter is receiving incorrect information. | The error is triggered when the water level sensor indicates that the tank is already full, but the fill valve is still open. 1. Disturbances in the flow meter circuit. 2. The sensor itself is faulty. 3. Problems with the control controller. |
| F8 8 | Incorrect water level. | The error is diagnosed when the water level is unstable, when the water level indicator (sensor) switches more than 20 times in 2 minutes. 1. The water level sensor is faulty. 2. Severe contamination of filters, filler or drain. 3. Excessive foaming. 4. The sprayer is unstable. |
| F9 9 | The collection of water does not stop. | The inlet valve is closed, the water indicator is on, but the water level sensor still continues to send signals (more than 10 pulses per 10 minutes) 1. Mechanical damage to the inlet valve. 2. Failure in the control board (triac short circuit) |
| FA 11 | The OWI (Optical Water Indicator) sensor is transmitting incorrect information. | The sensor does not switch during water collection or the signals from it do not correspond to the program. 1. The sensor lens is dirty. 2. An open circuit in the sensor or broken contacts. 3. The sensor is faulty. 4. Problems with the control controller. |
| FB 12 | Damper drive (motor) error. | 1. The drive motor is broken. 2. Break in the drive control circuit or contact failure. 3. The drive microswitch is faulty. 4. The drive seal is leaking. 5. Problems with the control controller. |
| FC 13 | The water hardness sensor transmits incorrect information. | The error is shown only in test mode; if there are problems with the sensors, check the control circuits and contacts, test the sensors themselves and make sure that the electronic components are in order. |
| FE 15 | Error in the built-in EEPROM memory in the control unit. | Reprogramming the control board may help. |
Electrolux dishwasher error codes
Not all errors can be shown during normal operation of the machine, only warning about problems that they can handle themselves. All other codes, including their details (there are some: many codes have subcodes that clarify the nature and location of the malfunction) can only be seen in a special test mode.
| Error Code/Blinking/Availability | Description of the error | Causes and elimination |
| For older models | ||
| S0 - ON/OFF button S1 ... S3 - Program selection button S4 ... S6 - Program selection button and/or additional functions LD 1 ... LD 3 - "Program" LED indicator LD 4, LD 5, LD 12 - "Program" LED indicator and/or “Add. functions" LD 6 ... LD 8 - LED indicator "Delayed start" LD 9 ... LD 11 - LED indicator "Cycle phase" LD 13, LD 14 - LED indicator "Salt" / "Rinse conditioner" | ||
| AL 5 LD 9 | 1) Exceeding the water filling time. The required level has not been reached. The pressure switch does not output the “Full” signal (contacts 1-3) after 4 minutes of the fill valve being open. 2) The pressure sensor (pressostat) gives the “Empty” signal (1-2) The required level has been reached. The pressure switch opens contacts 1-3 for more than 60 seconds. after the end of the bay. | 1) The water supply valve is closed 2) The hydraulic pressure of the network 3) The anti-leakage device (aquastop) has activated 4) Fill the disconnected solenoid/connection. 5) The connectors and wires of the fill valve are faulty, the valve is faulty. 6) Clogged or damaged pressure switch tube. 7) The central filter is clogged. Excessive foam. 9) Dishes are laid upside down. 10) Siphon effect in the drain hose. |
| AL 6 LD 10 | Drain time exceeded. | 1) The internal drain circuit is not passable (clogged / blocked) 2) The drain pump does not work (foreign objects in the pump) 3) The pressure switch is constantly in the “Full” position (1-3) 4) The pressure sensor tube is clogged or damaged. 5) Connectors or electrical connections are faulty 6) Control module (relay fault) |
| AL 4 LD 9 + LD 10 | The leakage protection has activated. | 1) Water leakage from the hoses/tank 2) Water leakage from various connections (recirculation pump, tube to the top sprinkler, etc.) 3) Mechanical sticking of the sensor, its microswitch or broken connections. |
| * AL 3 LD 11 | Heating time exceeded. The required temperature level has not been reached after 45 minutes. heating element on state. | 1) Heating element is damaged 2) Emergency thermostat has tripped (open) 3) Wiring is broken/damaged 4) Defective NTC sensor (poor thermal contact) 5) Self-draining (simultaneous filling and draining) 6) Defective recirculation pump (damaged working impeller) |
| * AL 1/2 LD 9 + LD 11 | 1) NTC temperature sensor is short-circuited. Resistance 2) NTC temperature sensor is broken. Resistance > 26700 Ohm. | 1) Sensor defective / short circuit 2) Short circuit in connectors/wires 3) High temperature (> 85°C) 1) Sensor defective / open circuit 2) Open circuit in connectors/wires 3) Low temperature ( |
| AL 7 LD 10 + LD 11 | The engine is blocked. | 1) Motor winding is short-circuited/broken 2) Motor is jammed (foreign objects in the pump) 3) Wiring is broken/damaged 4) Capacitor is short-circuited/broken 5) Tachogenerator is short-circuited/broken. |
| AL 8 LD 9 + LD 10 + LD 11 | Motor triac short circuit. | Short circuit of the motor triac on the control module. |
| In case of errors - AL 4, AL 5, AL 6, AL 7, AL 8, the machine stops - the corresponding LEDs flash. • To cancel the error, press S0 to turn off the machine. • When the machine is turned on again, the cycle resumes from the point where it was interrupted. * In case of errors - AL 1/2, AL 3 The cycle ends in the usual order. Errors are not shown to the user; the error is recorded in memory and can be read in test mode. | ||
| On models without displays, the error code is indicated by a blinking LED, on most models it is the End indicator, on the control panel the error number is equal to the number of blinks with a frequency of 2 Hz and pauses of 5 seconds. The blinking is accompanied by the same number of sound signals. Although more modern models display an error code on the display, some models still indicate an error by flashing the End indicator. Number under the error code: END LED signal (number of blinks). Next are the numbers: 11 - the error code is available in the normal operating mode of the dishwasher, 00 - visible only in test mode. | ||
| i10 1 11 | The machine does not take in water; the required water level has not been reached within the maximum time. | The drain pump immediately turns on and the washing stops. 1. The water supply tap is closed or the pressure is low. 2. Problems with the inlet hose. 3. The drain hose is not connected properly, causing the water to drain automatically. 4. The filling solenoid valve is faulty or its filter is clogged. 5. The water level sensor is broken. |
| i20 2 11 | Problems with draining waste water; after the maximum time has elapsed, the “empty tank” signal has not been received from the level sensor. | The washing stops here. 1. Inspect the drain hose. 2. Debris has accumulated in the drain filter. 3. The drain pump is broken. 4. The water level sensor (pressure switch) is faulty or there are disturbances in the sensor control circuit. |
| i30 3 11 | A signal was received from the float sensor of the Aqua-Stop system, which indicates a leak. | The washing process ends and the drain pump turns on. 1. Leakage in the drain pump. 2. Inspect all places in the machine where leaks are possible (input and output hoses, door, detergent tray, pipes, hopper). 3. The float sensor is faulty. |
| i40 4 11 | There is no water filling; when the washing program is turned on, the drain pump works, and then no water is added. | The water level sensor chamber is clogged, the sensor itself is faulty, or the control module is faulty. |
| i50 5 11 | No information is received from the circulation pump motor triac, possibly due to a short circuit. | When the engine does not receive commands from the control controller, it will begin to operate at maximum speed. It is necessary to check and repair the triac circuit, replace it if it is not working properly. |
| i60 6 11 | The water does not heat up or heats up very slowly or, conversely, overheats. | The washing still continues at the temperature that was achieved. 1. The temperature sensor or water level sensor is faulty. 2. Violation in the heating element control circuit. 3. Heater malfunction. 4. Controller board malfunction. |
| i70 7 00 | The resistance of the NTC sensor is outside the acceptable limits. | Washing continues without heating. The main possible cause is a short circuit, but there may be other causes. 1. Abnormalities in the NTC sensor circuit. 2. The NTC sensor itself is faulty. 3. Fault on the control board. |
| i80 8 00 | There is no or unstable data exchange between the microprocessor and the EEPROM memory. | You need to check the circuit between the processor and memory, and also make sure there is power on the board. |
| i90 9 00 | The checksum of the machine configuration data is incorrect. | The error is detected when the machine is turned on, as a result, the selection of the washing program is blocked. 1. Enter the correct configuration code. 2. Update the control board firmware. 3. The main control board is faulty. |
| iA0 10 00 | Something is blocking the rotation of the sprinkler arm. | Electronics control the rotation of the sprayer at each washing stage. 1. The dishes are placed incorrectly in the chamber. 2. An open circuit in the sensor circuit that controls the rotation speed. 3. The sensor is broken. 4. Failure in the control controller. |
| ib0 11 00 | The water turbidity sensor (if available in this model) is faulty. | The machine's electronics do not stop the washing process, but it does imply significant contamination. 1. Clean the machine chamber. 2. There is a fault in the sensor circuit. 3. The turbidity sensor is faulty. 4. Malfunction with the control controller. |
| iC0 12 00 | An error has been detected in the communication between the user interface (display) board and the control module. | If no data is received from the information display, the wash will temporarily stop while the connection is restored. 1. The wiring between the boards is broken or the contacts have come loose. 2. There is a fault on the display board. 3. Fault on the system board. |
| id0 13 00 | There is no signal from the tachogenerator of the circulation motor. | There is voltage to the circulation pump, but no confirmation message has been received from the tachogenerator; when there is no data on the engine speed, it is forced to start at too high a speed. 1. The wiring in the sensor circuit is broken or the contacts have come loose. 2. The tachogenerator is faulty. 3. Motor capacitor burnt out. 4. There is a malfunction in the engine, it requires comprehensive diagnostics, repair is possible. |
| iF0 14 00 | Within the maximum allotted time, water was not added to the required level at the washing stage that required topping up. | The washing continues “as is”, that is, with the amount of water that was collected; heating is turned off. The error is reset after drying. 1. During washing, the dishes in the chamber have shifted and are interfering with the collection of water. 2. The inlet filter is clogged. 3. Too much foam is generated during washing, usually due to the wrong detergent. 4. The pressure switch is faulty or its circuit is broken. |
How to call a specialist?
Requests for repairs are accepted daily, from 8 am to 10 pm by phone or using an online application.
8 (985) 181 – 02 – 88
8 (985) 181 – 02 – 88 (Whatsapp)
Leave a request for repairs
Important! When contacting, please provide the following information: Your contact information: name, phone number and address, make of the machine, if possible, send a tag with the serial number and product code of the machine and the day and time of arrival of the technician that suits you.
To carry out repairs and select spare parts for a dishwasher, you need to know its model and serial number.
The exact model of the machine is indicated on the tag on the dishwasher body or stickers, as well as in the operating instructions. If you have already purchased replacement parts yourself, please indicate only the make of the machine. For example, ELECTROLUX GHE 613CB3 (IKEA).
places where dishwashers may contain a sticker with all the necessary service information.
1. Under the door on the body. Most often, on dishwashers, the serial number is located on a sticker under the door. Either on the door itself or on the body. In most cases, the number consists of numbers, less often of numbers and letters .
2. On the back wall. The back wall of the dishwasher is a traditional place for all kinds of service information. If you couldn’t find a sticker with a number on the front, then it was probably preserved on the back wall.
3. In the passport or instruction manual. Finally, the serial number can sometimes be found on the documents that come with the purchase of the dishwasher. As a rule, the number is located in the passport or warranty card.
The arrows show the location of the tags
Dishwasher manufacturers encode on the tag (sticker) what they produced, when, where and from what parts. This information is encoded in two sequences of numbers (letters) product and serial numbers. Their combination is unique and applies only to one specific dishwasher.
Please take a photo of these tags
To maximize the life of your dishwasher, you need to carefully read the operating instructions. If you have lost it, here you can select your model and download it in pdf format.
Dishwasher Operating Instructions
Dishwashers from manufacturers that we repair
Basic dishwasher malfunctions
Like any other appliance, an Ikea dishwasher can suffer from some kind of malfunction over time. The main problems with this technique are:
- the filter is clogged with food debris (be sure to remove any food debris from plates and pots);
- The washing process does not start (reason: the door does not fit tightly, this is how the machine protects against water spills);
- water does not spray out (reason: nozzles are clogged, remedy: clean the nozzles with a toothpick).
To ensure that an appliance like an IKEA dishwasher serves you for many years, use a high-quality detergent and various additives to protect against scale, which inevitably forms in hard water.
Related article: Who invented the Kirby vacuum cleaner
Prices and specifications
What parameters should a high-quality dishwasher meet? First of all, of course, to have a long service life if the operating requirements are met. The last point is especially important, because Equipment breakdowns can sometimes be caused by improper handling.
All PMMs are accompanied by paper instructions. It can also be found in electronic form in the product card on the official website. Link to the catalog with all models on the official website - https://www.ikea.com/ru/ru/cat/posudomoechnye-mashiny-20825/?sort=priceAsc
Open the desired model, click on the “Instructions and Documents” section and you will see a link to the PDF document. There may be two links, download both: one shows the installation sequence in pictures, the second with a full description in Russian.
The main criteria for choosing technology are:
- price;
- economical operation (electricity consumption);
- capacity (number of sets);
- dimensions;
- guarantee period.
To make it more convenient to compare all the options presented in the catalog by price and characteristics, we have compiled a summary table.
| Model | Dimensions, width/depth/height in cm | Electricity consumption, kWh at normal load | Capacity, number of sets | Warranty, years | Price |
| LAGAN | 59.6/55.5/81.8 | 1.4 — 1.6 | 13 | 2 | 19 299 |
| ELPSAME | 44.6/55.5/81.8 | 1.0 — 1.2 | 9 | 5 | 22 999 |
| RENGYORA | 59.6/55.5/81.8 | 1.4 — 1.6 | 13 | 5 | 26 999 |
| MEDELSTOR | 44.6/55.5/81.8 | 0.8 — 0.9 | 9 | 5 | 28 999 |
| SKINANDE | 59.6/55.5/81.8 | 0.920 | 13 | 5 | 32 999 |
| RENOLAD | 59.6/55.0/81.8 | 0,832 | 13 | 5 | 44 999 |
| HIGIENISK | 59.6/55.0/81.8 | 0,857 | 15 | 5 | 49 999 |
The most economical in energy consumption are the narrow Medelstor and the full-size Renodlad.
Watch the video for installing and connecting the PM:
Malfunctions of PMM "Ikea"
Most malfunctions are associated with violation of the operating instructions or wear of parts. Many problems can be diagnosed independently.
| Manifestation of breakdown | Repair |
| Complete stop of the washing process. | Check the water supply, supply and drainage systems for blockages and leaks. |
| The water does not heat up. The machine operates at low temperatures. | Replace the temperature sensor. |
| The machine does not complete the process, there is not enough water. | Clean the water supply channels, check the pressure switch. |
| The PMM continues to work after the end of the mode time or stops ahead of schedule. | Conduct diagnostics of the drain system, pump, level sensor. |
| Water remains in the machine and the mode does not end. | Place the dishes correctly. |
Article on the topic: What is a construction vacuum cleaner
In summary, we can summarize the positive aspects of IKEA dishwashers:
- Economical consumption of resources;
- Quiet operation;
- Functionality, absence of “extra” programs;
- Clear instructions for installation and operation in Russian;
- Clamps for fragile dishes;
- Adjustment of space for placing dishes.
Weak sides:
- “Capriciousness” in relation to detergents;
- The need for pre-soaking;
- Lack of service centers in many cities.
The model line of the Swedish manufacturer includes varieties for every taste, and a variety of technical characteristics will allow you to choose a car for any family.
The lineup
The IKEA brand offers a wide range of products so that everyone can choose the most suitable model for themselves.
"Elpsam"
| Type | narrow |
| Dimensions (width x depth x height) | 44.6x55.5x81.8 cm |
| Installation | built-in |
| Capacity | 9 sets |
| Energy consumption per cycle | 0.87 kWh |
| Water consumption (liters) | 13 |
| Noise level (dB) | 50 |
| Number of modes | 5 |
| Display | No |
| Leak protection | full |
| Drying dishes | condensation |
| Price | 19,999 rubles |
Advantages:
- Economical;
- Protected from leaks;
- Good wash quality.
Flaws:
- Noisy drain pump;
- The dryer does not completely dry the dishes;
- Difficult to place large utensils.
Description of PMM "Elpsam"
The Elpsam built-in dishwasher was created by the company in collaboration with Whirlpool. The main convenience is that you can buy both household appliances and kitchen units in one store - you can immediately decide on the design of the room and its functionality.
TOP 7 best brand models
Ikea has seven dishwashers in its arsenal. They are united by the type of installation - all models are built into a furniture set. Other characteristics, from dimensions to basic functions and programs, may vary. Let's consider models starting with the most inexpensive Lagan for 20 thousand rubles. and ending with the favorite - Hygienisk for 46 thousand rubles.
Model #1 - Lagan
A budget car with a minimum set of necessary functions.
Technical data of the Lagan model:
- energy consumption: A+ according to European standards;
- noise max: 52 dB;
- capacity: 13 sets;
- internal LED backlight: no;
- water consumption: 15 l – “Eco”, standard cycle;
- number of washing programs: 3;
- auto opening: yes;
- time indicator on the floor: no;
- Aquastop function: no;
- delayed start: no;
- weight: 38.9 kg;
- dimensions: 818x596x555 mm;
- power cord length: 1.5 m;
- warranty – 2 years.
There is no indication that the floor is being washed, but a low signal sounds at the end of the program. Rinse and salt indicators help you keep track of how full the containers are.
For ease of loading dishes, both baskets are removable. They can be rearranged a little lower or higher to free up space for large utensils - pots, molds, baking sheets.
Model #2 - Elpsam
The model costs the same as Lagan. The main difference is the width. Elpsam refers to narrow built-in models, which are often installed in small-sized kitchens.
One of the advantages of the model is that it is equipped with additional folding shelves for cups and plates, one and the other in pairs. They can come in handy when you need to load a large number of small serving items.
Technical data Elpsam:
- energy consumption: A in euros. standards;
- noise max: 50 dB;
- capacity: 9 sets;
- internal LED backlight: no;
- water consumption: 13 l – “Eco”, standard cycle;
- number of washing programs: 5;
- auto opening: yes;
- time indicator on the floor: no;
- “Aquastop” function: yes;
- delayed start: no;
- weight: 32 kg;
- dimensions: 818x446x555 mm;
- power cord length: 1.5 m;
- warranty – 5 years.
Despite the reduced width, the model functions fully and has as many as 5 washing programs to choose from. In addition to the three basic ones, there is a rinsing program for perfect cleanliness and a useful 30-minute program for quick washing.
Model #3 – Medelstor
Another narrow model to save useful space in the kitchen. The cost of the Medelstor dishwasher indicates its increased functionality, therefore it is slightly higher than that of previous models.
If you need to decorate the door, you should order a front panel to match the rest of the set.
IKEA offers options for the integrated purchase of furniture and appliances, which is cheaper and much easier to install.
Technical data Medelstor:
- energy consumption: A+ in euros. standards;
- noise max: 47 dB;
- capacity: 9 sets;
- internal LED backlight: no;
- water consumption: 10.3 l – “Eco”, standard cycle;
- number of washing programs: 6;
- auto opening: yes;
- time indicator on the floor: yes;
- “Aquastop” function: yes;
- delayed start: present, 24 hours;
- weight: 32 kg;
- dimensions: 818x446x555 mm;
- power cord length: 1.5 m;
- warranty – 5 years.
For one washing cycle, if you use the “Eco” or “Standard” program, 0.79 kWh of electricity is required.
Features of the company's dishwashers
Whirlpool and Electrolux worked on Ikea dishwashing equipment , so the machines meet European standards, have a full range of functions, have a pleasant interface and more than last their service life.
Over time, the company introduced new developments and improved the energy consumption class - now it is A , A+ or A++ . All dishwashers are fully built into furniture modules; the door can be decorated with a panel to fit the furniture.
The manufacturer recommends that customers pay attention to the following technical nuances:
Otherwise, IKEA dishwashers are not much different from competitive models, since almost all manufacturers try to produce comfortable, functional, safe and stylish units.
A big plus is the availability of models of different prices. You can choose a dishwasher for 20 thousand rubles, but with incomplete functionality, or you can choose a more expensive one - with maximum capabilities and a set of additional options.
