Where are the shipping bolts located on a top-loading washing machine?
For washing machines with top-loading laundry, the transport bolts are installed on the rear wall or under the cover in the upper part of the body. For SMA with a horizontal drum - only on the back side of the device. The number of bolts is usually 4, but can be 2, 3 or 5.
Interesting materials:
What foods help increase muscle mass? What foods promote melatonin production? What products are included in protein? What foods affect vision? Which manufacturers of acrylic bathtubs are better? Which fitted sheets are best? What expenses can be written off under the simplified tax system? What plants kill weeds? What categories do welders have? What sockets should be behind the TV?
Reasons for the spontaneous movement of large household appliances
The main reason for a washing machine to move is vibration. The fact is that during the rotation of the drum with laundry, a centrifugal force arises, which is transmitted to the body of the device. Most of it is damped by a counterweight and a shock absorber system with springs. If the engine is turned on at maximum speed, and the laundry is distributed unevenly inside the drum, the vibrations cannot be completely suppressed.
Most often, narrow models “walk”. Manufacturers, trying to reduce the size and weight of the device, install excessively light counterweights inside. Their inertia is not enough to stabilize the drum during spinning. At the same time, in other modes the body is completely motionless.
If you notice that a recently purchased device moves on its own, the cause of the movement may be improper installation. Often it is enough to simply level the case, and the problem will go away by itself.
Of course, damage to one or more units of the washing machine cannot be ruled out. The reasons for vibration can be different, for example:
- the shock absorber has failed;
- one or more springs have burst;
- the counterweight fastening has become loose;
- The drum bearing is broken.
If any of the above malfunctions occur, you must immediately take all possible measures to securely fix the washing machine. Strong vibration is fraught with consequences. It not only contributes to the “walking” of the washing machine, but can also lead to the failure of a number of its expensive parts.
Mechanical problems
Mechanical problems may include worn locks or other external damage. This occurs due to excessive load on the door. Small children can ride on it or wet clothes are often hung on it after washing. Breakage can also occur if the hatch is slammed too hard.
We have hatch locking devices for different models of washing machines. Our technician will replace the broken mechanism in a matter of minutes at your home! You can leave a request by phone: 8(499)113-60-22. We travel for free throughout Moscow and the Moscow region.
Skewed loops and tongue
If there is no clothes in the washing machine, but something is still preventing the door from locking, then you need to check the locking tab and hinges. They are the main functional parts of the washing machine hatch.
To eliminate this malfunction, you need to adjust the door level. You also need to check the tightness of the fasteners. If the adjustment does not help, the parts that have become unusable should be replaced.
To replace the hinges you need:
- Remove the door from the washing machine body.
- Unscrew the screws that connect the two parts of the door.
- Separate the parts using a little force. It is better to try pressing in different parts of the door, otherwise you may break the body.
- Remove the loop and replace it with a new one.
- Assemble the door body.
- Set it in place.
Handle breakage
Sometimes the washing machine door does not open. The laundry had already been washed, but the handle on the lid broke and the door was locked. In this case, you can use the emergency hatch opening function (press the power button three times). But how to completely get rid of this problem?
To change the door handle to a new one, you must:
- Remove the door from its hinges.
- Unscrew the screws and separate the plastic halves of the cover.
- Remove the glass.
- Pull out the rod to which the handle is attached. To do this, push a long thin wire or nail into the bolt and pry up the rod.
- Pull out the handle.
- Install a new handle.
- Reassemble the door by performing the steps in reverse order.
Article on the topic: How to remove the filter from an Ariston washing machine
Guide deformation
If the guide breaks, it will not be possible to close the hatch at all and the machine will not start the wash. Most often, guides are made of plastic, and this material quickly wears out during operation.
You can fix the problem yourself. But you need to understand that the guide cannot be repaired. It is necessary to purchase a new part and install it to replace the one that has become unusable.
To change the plastic guide, you need:
- Get rid of the old cuff.
- Separate the housing parts.
- Unscrew the screw.
- Pull the latches towards you.
- Disconnect the plastic clamps.
- Clean all parts from dirt and dust.
- Install a new part.
Garbage in UBL
If debris gets into the hatch locking device, the machine door stops locking. Since the heating resistor also works simultaneously with the blocking device, the resistance increases with increasing temperature. Therefore, over time, the plates shift and become deformed. The washing machine door is secured by a lever connecting the guide to the latches. When the washing process stops, the temperature of the resistor becomes lower and the contacts return to their original position. If a foreign object gets into the UBL, then disruptions begin in this harmonious process.
To clear the blocking device from debris, you need to disassemble the washing machine. Then the device must be pulled out and checked for foreign objects. If necessary, clean the blocker and reinstall it. We will tell you more about how to remove the UBL from the washing machine below.
Counterweights and springs
The washing machine has two concrete, so-called “counterweights”. One is located behind the tank, the other can be in front of it. They are made of high strength concrete and grade (I read somewhere that it is 800 - 900). They have special fasteners, bolts that hold this entire structure, as well as special springs.
What malfunctions could there be:
In both the first and second cases, the machine will jump and rumble, even if it is installed correctly.
Faulty bearings
One of the reasons why the car jumps is a bearing failure.
Replacing bearings is not an easy process, so it is advisable to call a specialist who will professionally perform this work. The metal from which the bearings are made deteriorates over time:
- When the bearings are destroyed, the machine first begins to work noisily, and then the drum completely jams. If the bearing has just begun to fail, it is not easy to “make a diagnosis.” As a rule, professionals determine the wear of parts by detecting the slightest extraneous sounds.
- And if the bearing is seriously damaged, you can move the drum. If it is too mobile, then this is a signal to call a specialist.
How to make a car stand still
There are several ways to reduce vibration and securely anchor your washing machine to the floor. First of all, you can simply make the device heavier. Some owners do this; they place a bowl of water, a bag of powder, or a stack of books on the top lid.
The extra weight does add stability to the device, but it's not an option. Not only will such a design not decorate the apartment, but there is also a high probability of pushing through the thin material of the top panel. It is easier and safer to use special stands and other products designed to reduce vibration.
Bearing wear
The bearing becomes unusable due to water ingress. Over time, it rusts and becomes deformed. At first, you can hear a metallic grinding sound and notice an increase in vibration when spinning clothes due to the free movement of the drum. The drum may then become completely jammed.
It is important to correct the situation as early as possible. Otherwise, the problem may result in serious damage that will require expensive repairs.
You can diagnose wear by moving the drum. If it moves easily in different directions, then you should contact a service center. Only a specialist with the knowledge and skills can replace the bearing correctly.
Anti-slip mat
An anti-slip floor mat is another option that will prevent the machine from “running” and “jumping” on the floor surface. An anti-vibration product can kill two birds with one stone: prevent the equipment from slipping and reduce the vibration of the machine during the washing process.
The anti-slip carpet has two layers:
- the upper one, which is characterized by an anti-slip effect, has increased resistance to various types of mechanical damage;
- the lower one, responsible for ventilation and absorption of body vibrations.
The carpet material, which has a bubble structure, contributes to good shock absorption. Rubber, which is one of the main components of the product, allows the fabric not to deform, withstand heavy loads, and be resistant to temperature changes (can be used at temperatures from -40 to +120 °C).
It is very important to choose the right anti-slip mat. Let's make a brief overview of the highest quality anti-vibration sheets:
- A two-layer carpet from the Proflex brand is of high quality and environmentally friendly. The product is odorless and has excellent antistatic characteristics;
- Mattix-Vibromats can withstand large temperature changes and differ from analogues in increased wear resistance. The carpet is able to withstand increased loads and is completely safe for the health of family members;
- the budget Lux canvas is characterized by excellent anti-slip properties, however, some users note the weak anti-vibration effect of the product;
- The Shahintex universal fabric is ideal for both small and large washing equipment. The product is easy to clean, perfectly absorbs noise, and prevents the machine from slipping.
Interesting:
- What pressure is needed for an automatic washing machine?
- How to choose a surge protector for a washing machine
- LG washing machine makes noise when spinning
- Washing machine socket installation height
- Ariston washing machine makes noise when spinning
- The Atlant washing machine jumps
2 reader comments
- 12/22/2020 at 1:51 pm
Anonymous:
When the machine vibrated during the spin cycle, it jumped a lot and broke the thread of the leg. Now even on the rug it moves to the side. How to fix this problem?
Answer
- 05/21/2021 at 01:00
Paul:
Cut a new thread and buy a leg with a larger bolt
Answer
GoodFoot coasters
The first way is to install special anti-vibration stands under the bottom of the washing machine. If you place such devices under the legs, you can forget about sliding and jumping of the unit. The stands, designed to prevent vibration of the machine, look stylish and will not spoil the appearance of the interior.
These footrests are made from very durable polymer. The material of the products does not heat up, does not deform, and is not afraid of moisture. Manufacturers claim that the relief on the surface of the stand prevents the automatic machine from moving arbitrarily on the floor, and the provided stiffening ribs absorb vibration shocks well, while simultaneously effectively distributing the load.
Installing anti-vibration stands is quite easy; this does not even require disconnecting the washing machine from communications.
To place special stands, you need to lift the machine on the right side and carefully place polymer products under the legs of the equipment. The same actions are carried out with the left side of the unit.
Step-by-step installation instructions
Installation of an automatic washing machine should begin with preparing the place where it will be installed. Models with horizontal loading require more space, while models with vertical loading require less.
The first mistake when creating an installation site is installing the device in a niche, which practically squeezes the machine on the sides. Such a solution can almost immediately lead to vibration problems, since the device still creates vibrations and this requires space - about 3-4 cm on each side, otherwise you can observe the problem of the device hitting the walls of the furniture.
Many craftsmen say that the minimum gap between furniture and appliances should be 1 cm, but this is not enough for most models.
Installation diagram: 1 - machine, 2 - connection to the electrical network, 3 - water supply pipe, 4 - sewer adapter
When choosing a place, you should pay attention to:
- convenient location of communications;
- presence of unevenness on the walls;
- the presence of objects on top at a height of less than 2-3 cm from the machine.
The basic installation diagram consists of the following steps:
- removal of all transport devices;
- connection to the sewerage system and water supply system - the main difficulty here is the selection of adapters for pipes; they should be selected according to the diameter of the machine pipe and pipes;
- connecting the adapter to the water supply system - it is better to install it at the junction of the tap with the water supply;
- installation of a sewer adapter;
- connection to sewerage and water supply systems;
- Level adjustment of the legs using a building level with pinpoint precision.
The biggest difficulty during installation is the type of floor covering, on which the “activity” of the machine depends. When installing on a tiled (tiled) or wooden floor, there should be no problems with installation, since such surfaces are smooth and hard, which is what is needed.
Important! Laminate and linoleum are softer coatings, so it is recommended to lay an additional hard layer on them in the form of chipboard.
Unlocking the LG washing machine
What to do if the washing machine does not open? In most cases, you can remove the blockage from appliances of this brand using standard measures that are also suitable for other washing machines.
The original version only has a child lock. To install it, you need to simultaneously press two buttons: super rinse and prewash. The command is canceled by a similar action, after which washing can be continued by pressing the start/pause button.
