depending on the model...
Page 4
- Image
- Text
SM512
4
MACHINE INSTALLATION (depending on model)
V
For transportation, the swinging unit of the machine is fixed with 4 spacers on screws. Before using the machine, unscrew the locking screws and remove them together
With
blocking
spacers. Save the screws and spacers for future moves.
Cover the holes on the back panel with the supplied
V
complete
plugs. Note: If the spacers are still inside the machine, remove the rear panel, remove them, and reinstall the panel.
For transportation, the swinging unit of the machine is fixed with 4 spacers on screws. Before using the machine, unscrew the locking screws with a wrench.
Insert a screwdriver into the holes and remove the 4 plastic locking spacers as shown in the picture. Note: If the spacers are still inside the machine, remove the rear panel, remove them, and reinstall the panel.
DRYING WASHING Washing and drying ATTENTION…
Page 10
- Image
- Text
SM512
10
DRYING LAUNDRY
Washing and drying ATTENTION!!! For washing powders and liquid detergents of some
When purchasing brands, special plastic containers are included that are placed directly into the drum of the washing machine. These containers are only used for washing programs and should not be placed in the drum when using the drying cycle.
1.
Press the half load button.
2.
Do not use the “stop with water in the tank” and “turn off the centrifuge” buttons.
3.
Set the drying time using the drying time selector knob.
4.
Select the washing program and temperature.
5.
Set the washing program and temperature.
6.
Turn on the machine by pulling the programmer handle towards you, or, if the machine has an ON/OFF button, press it (the corresponding indicator light will light up).
7.
At the end of the washing program, the machine will stop at one of the STOP marks on the programmer.
8.
When drying is complete, the drying time selection knob will stop at zero.
9.
Turn off the machine by pressing the programmer knob, or, if there is an ON/OFF button, press it (the corresponding indicator light will go out).
10. Take out the laundry. 11. With dry hands, remove the plug from the outlet. 12. Close the water tap.
Drying only ATTENTION!!! Do not dry items that have previously been
treated with solvents or gasoline-based substances as these substances may cause an explosion. The drying mode does not work when setting the wool washing program. If you use laundry detergent or liquid detergent containers during washing, remove them from the drum before drying. Then be careful not to dry out the laundry. It is better to leave it slightly damp, since when it dries, the linen becomes very wrinkled and then difficult to iron. The following items should not be dried in the machine: sleeping bags, feather beds, pillows and large blankets, as by expanding during the drying process they prevent air from entering the machine. The drying mode can only be set when the programmer knob is in the STOP position.
1.
Load the machine with laundry and close the hatch door correctly. ATTENTION!!! For best results, do not exceed the following load rates: 2.5 kg for durable fabrics (2 kg for extra large or extra small items); 1.5 kg for mixed or synthetic fabrics. If the above loading standards are observed, the laundry will rotate freely in the drum, will not wrinkle, and the result will be excellent.
Comments
Select → I found the instructions for my washing machine here! #manualza
- Click →
Here at my grandfather’s barn, I found an old military brochure, produced in 1976: “Instructions for packing a parachute, second edition, supplemented and corrected.”
Manualza!manualza.ru
Still not with us?
The machine is intended for household use only...
Page 3
- Image
- Text
SM512
3
✽
The machine is intended for domestic use only.
✽
Any modification or attempt to modify the appliance may be hazardous to the user and may cause damage to the washing machine itself.
✽
Given the significant weight of the machine, special safety precautions must be observed when moving it.
✽
Children are prohibited from using the machine without adult supervision.
✽
Any changes to plumbing or electrical
networks
must
carried out by specialists.
✽
After installing the machine, make sure that it is not standing on the electrical power cord.
✽
Before turning on the machine, remove all packing material and blocks used to transport it (safety
screws).
IN
Otherwise, you can seriously damage both the car and the apartment.
✽
If the appliance is installed on a rug-covered floor, you should check that between the washing machine
And
floor
free
air circulated.
✽
The washing machine must be connected to a grounded electrical network in accordance with safety regulations.
✽
At the end of each wash, you must unplug the machine from the mains and turn off the water supply valve.
✽
Do not insert or remove the electrical plug with wet hands.
✽
Do not overload the washing machine.
✽
Machine wash only machine washable fabrics. If in doubt, refer to the recommendations
manufacturer,
given in the form of symbols on the clothing label (see “Clothing care symbols” page 6).
✽
Before putting items in the washing machine, make sure all pockets are empty. Hard and pointed objects such as coins, pins, nails, screws or stones can seriously damage the machine.
✽
Do not wash items soiled with products containing gasoline in the washing machine.
If stains are removed with solvents, you should wait until they have completely evaporated from the surface of the fabric before putting items in the machine.
✽
At the end of the wash cycle or after switching off the machine, it can only be opened after one minute.
✽
At the end of washing runners, bedspreads and other fabrics made from long fibers, you need to check
filter
And
at
need to clean it.
✽
Before a long planned absence from home or when it is expected that the washing machine will not be used for a long time, it is necessary to remove the plug from the socket and close it.
tap
submissions
water.
It is also recommended to leave the car door slightly open to allow ventilation inside the car.
✽
Do not expose the washing machine to the elements.
✽
Under no circumstances should you try to repair device malfunctions yourself, as repairs performed by non-specialists can cause serious damage to the machine and will deprive you of the right to warranty repairs.
✽
Repairs to the device must only be carried out by service personnel. Only original spare parts must be used for repairs.
NOTES AND TIPS FOR THE USER
OPERATING THE WASHING MACHINE Attention: before using...
Page 9
- Image
- Text
SM512
9
OPERATING THE WASHING MACHINE
Attention: before starting the first wash, you should perform a short wash cycle without loading laundry. This makes it possible to check the operation of the washing machine and clean the drum. Precautions before starting washing:
Check that the connection to the water supply network is correct: the water supply tap must be open and the drain hose must be in the appropriate position (see the “Installation” section and Figures 4-7). Check that the programmer knob is in the stop position. With dry hands, insert the plug into the outlet. Sort your laundry by fabric type (check the symbols on the labels). Before loading clothes into the drum, make sure that: the pockets of the clothes are empty, torn parts are sewn up, zippers are closed, belts, buckles and hooks are fastened, and stains are previously removed.
Performing a wash cycle: (sequence of operations that must be performed before setting the selected cycle and turning on the machine) 1.
Open the hatch door.
2.
Load the laundry into the drum and close the hatch door. Attention: Do not overload the washing machine. It is not recommended to wash items that absorb large amounts of water, such as carpets.
3.
Pour low-foaming washing powder for automatic washing machines into the appropriate compartments and add conditioner (see section “Using detergents”).
4.
Close the detergent drawer. Attention: To avoid water leakage, do not remove the detergent drawer while the machine is running.
5.
Select the desired program and temperature using the appropriate knobs. ATTENTION!!! Do not rotate the programmer knob counterclockwise. If you accidentally turn the knob past the mark for the selected washing program, it cannot be turned back. Turn the programmer knob further clockwise to the desired position.
6.
To set the required functions, press the corresponding buttons.
7.
To turn on the machine, pull the programmer handle towards you or press the on/off button (if provided in this modification), after which the control light should light up.
At the end of the washing program, the machine stops at one of the STOP/STOP programmer marks: 1.
Turn off the machine by pressing the programmer knob or on/off button (if provided).
2.
Remove the laundry from the machine.
3.
With dry hands, remove the plug from the outlet.
4.
Close the water supply tap.
GENERAL CHARACTERISTICS OF THE WASH DRYER Washing machine with...
Page 2
- Image
- Text
SM512
2
GENERAL CHARACTERISTICS
WASH DRYER
A washer dryer is an electrical household appliance in which, in a user-selected mode, you can wash and dry any type of fabric, with the exception of down jackets and quilts.
The outer side of the structure is made of metal panels, subjected to special anti-corrosion treatment and coated with paint (9 layers) to give the machine a pleasant aesthetic appearance.
The motor and all moving parts of the device are designed in such a way as to guarantee a minimum noise level during its operation.
The wide drum is made of stainless steel, firmly fixed to the structure and has no sharp parts. This ensures good washing quality and durability of items.
The program panel clearly shows all types of washing and drying. The wide-opening door makes it easy to load and unload things from the car.
The excellent stability of the washing machine is the result of long-term research carried out to find the balance of masses in motion.
Drying things is done quickly and easily through the use of special heat regeneration and recycling systems, which provide significant energy savings.
The device complies with safety standards EN 60335 for the operation of electrical household appliances and standards for protection against radiotelephone interference EEC 87/308 dated 02.06.87.
The device is intended for domestic use and operates at an electrical voltage of 220 V.
The product has a Rostest certificate
In case of contacting
authorized service center inform the factory
the number of the washer dryer indicated on the information plate of the device and
in the warranty book
