Housewives quite often have an annoying situation - the washing machine does not turn on. As a rule, the problem appears unexpectedly. Before the next wash, you add powder, put the laundry in the tank and try to start the equipment, but the machine does not react in any way to repeated attempts to turn it on.
The washing machine does not turn on for various reasons: these can range from minor malfunctions to serious problems
Before you run to the nearest service center or write off your assistant, you can try to find the reasons that caused the equipment to fail.
In the event of a breakdown, contact the HelpMasterService workshop. Repair of any complexity of all brands of washing machines.
Symptoms of malfunction
A complaint that the washing machine does not turn on may imply various symptoms that accompany the main problem:
- when you press the power button, the machine does not give any signals;
- when turned on, one indicator lights up, nothing else functions;
- After attempting to start, all indicators flash.
Depending on the specific case, methods for solving the problem are determined. Some causes of the malfunction can be eliminated on your own, while others require specialist intervention. We will consider further how to resume operation of the machine based on signs of breakdown.
LG washing machine, power does not turn on: device cord
Mechanical damage can damage the power cord of the washing machine; as a result, it will not turn on after this. Make sure that the cord is always free from other furniture; if, for example, you place a kitchen cabinet on it, such a nuisance may occur. Overvoltage in the network can affect the integrity of the plug contacts, then electricity simply will not flow to the machine, however, new models of LG equipment are protected from such incidents.
It is impossible to disassemble and repair such a “plug”; you will have to replace the cord completely.
The machine does not respond at all when turned on
If you connected the washing machine to the network and pressed the power button, but the equipment did not respond in any way, there may be a loss of electricity in the outlet . Check if there is light in the house and if other electrical appliances are working. If everything is fine with electricity, you need to consider other common reasons why the machine may not turn on:
- The circuit breaker has been knocked out . Perhaps moisture got into the outlet or a short circuit occurred for other reasons. Check whether the circuit breaker that supplies power to the washing machine is turned on. If disabled, try turning it back on. Does the machine still kick out? Then you need to identify the cause of the short circuit.
- The residual current device (RCD) tripped and turned off the electricity. Perhaps there was a current leak on the body of the machine, the RCD failed or reacted by turning off due to poor-quality wiring.
- The socket is broken . To avoid this breakdown, you should check the functionality of the power socket using an indicator screwdriver or a multimeter. The easiest way is to plug another electrical appliance into this outlet. If it works properly, then the cause of the breakdown lies in something else.
If the circuit breaker, RCD and socket are working properly, you need to consider other possible causes of the problem.
If the machine does not start at all and the indicators do not light up, the power cord or extension cord may be faulty . In the first case, it is worth checking the wire that directly connects the machine to the outlet for mechanical loads. Carefully inspect the outside of the wire - it may be bent or damaged. The best way to check the serviceability of the cord from the inside is to test it with a multimeter.
A multimeter is a multifunctional device for measuring resistance, voltage and current. You can buy it at electrical stores
The machine may not turn on due to a faulty extension cord . Try connecting the washing machine directly through the outlet, thereby eliminating a possible malfunction of the element.
A faulty power button can also cause the washing machine to not respond to commands. In some units, the current supply through the power cord goes directly to the power button; that is why its breakdown can negatively affect the startup of the equipment.
To check the functionality of the button, it is best to use a multimeter. The device should be switched to buzzer mode and the button should be ringed first when it is turned on, then when it is turned off. The machine must be de-energized. If the multimeter makes a sound when the button is on, it means the button is properly supplying power from the network. In the off position, it should not ring through the multimeter.
Another possible cause of the malfunction is a breakdown of the network interference filter (IPF) . The device is needed to protect the washing machine and nearby equipment from power outages. When it breaks, current cannot flow through the circuit, so it is impossible to turn on the washing machine.
In most washing machines, the surge filter is mounted on the body, under the top cover.
To avoid damage, you should find the location of the filter in the machine. In Samsung, LG, Indesit, Ariston, Ardo, Bosch, Zanussi, Electrolux, Beko machines it is usually attached to the body, under the top cover. To check the serviceability of the part, you can ring the filter using a multimeter. If the device detects only the incoming voltage, but no current flows at the output, then the FPS needs to be replaced.
When testing the surge protector for voltage, be extremely careful. If you are not sure of your actions, it is better to check the element in another way, after turning off the power to the machine.
When all of the above reasons have been excluded, the control module should be checked for damage . If you do not have sufficient knowledge in the field of electronics, it will be difficult to independently identify the malfunction of this part. In such a situation, it is necessary to entrust the diagnosis to a specialized specialist who can detect the problem and, depending on the cause, replace or repair the module.
No electricity
The LG washing machine may not turn on due to such a banal reason as a lack of electricity in the network. This situation is the most likely.
There may be no electricity for the following reasons:
- The electricity in the house was turned off.
- A short circuit or overload occurred in the network, as a result of which the machine was knocked out.
- The RCD tripped. This can happen, for example, due to an electrical leak.
- The socket is broken. Here it is recommended to first check the serviceability of the outlet. To do this, you need to plug in another electrical appliance. If the device works, then the problem is not in the socket.
When you turn on the machine, one indicator lights up
If the machine reacts to startup with the light of one indicator, we can say that it turns on, but does not work. After turning it on, it is impossible to fill the drum with water, select and set the washing mode - the equipment does not respond to any commands. In this case, the problem may lie in a wide variety of reasons.
First, check if the hatch door is tightly closed . It should automatically lock after starting the wash program. If the door closes with a characteristic click, but after the wash starts it does not lock, then the problem lies in the washing machine hatch door locking device.
You can check the serviceability of the hatch door locking device yourself
You can check the blocking yourself by ringing it with a multimeter. If the device detects the supply of voltage to the device after starting the program, then it is working properly. Otherwise, the hatch locking device needs to be replaced.
Other reasons that the equipment refuses to work may be hidden in a malfunction of the control module , or a breakdown in communication between the control panel and the module. Such problems must be resolved by specialists.
LG washing machine does not turn on: faults and solutions
- Possible reasons
- What should I check?
- How to repair?
- A special case
Sometimes household appliances give us surprises. So, an LG washing machine, which was working properly yesterday, simply refuses to turn on today. However, you should not immediately write off the device for scrap. First, you need to determine the possible reasons why the device does not turn on, and also consider options for correcting this problem. This is exactly what we will do in this article.
When turned on, all indicators react
You connected the washing machine to the network, it started, but suddenly all the lights turned on or began to blink chaotically. Signs such as these may indicate a wiring problem .
Only a qualified technician who is well versed in this issue should repair or change the wiring.
In such a case, you will have to either completely replace the wiring in the house, or repair the part that is causing the problem. The breakdown may be due to loose contacts , which can be easily repaired on your own. Also, blinking indicators sometimes indicate damage to the software module .
If, when you turn on the washing machine, all the indicators light up at the same time, this indicates problems with the contacts or wiring.
If the washing machine doesn't turn on the first time, there's no reason to panic. Perhaps the problem is not serious and you can solve it in a few minutes. If none of the proposed methods yielded results or you were unable to understand the intricacies of the repair, it is best to entrust the work to the service department.
The network cable is faulty
To check the serviceability of the power cord of your LG washing machine, you should use a tester. This can be done using an indicator screwdriver.
If the wire of the LG washing machine is faulty, then it will have to be completely replaced with a new one. You can, of course, try to connect the cord at the breaking point using a soldering iron or special tape. But this is dangerous and will only delay the solution to the problem.
Control panel chip
The control module of the Elgie washing machine consists of a complex microcircuit that receives user signals and transmits them to all operating systems, while controlling all processes. Naturally, it is the control module that is responsible for turning the device on. Failure of one of the components of the microcircuit and its spare parts will lead to serious repairs, which you most likely will not be able to handle on your own. Often this module cannot be repaired at all and will have to be replaced; in any case, problems with it require calling an LG service center technician.
How is the problem solved, and is it possible to prevent it?
Why doesn't the vacuum cleaner work? Let's look at some trivial reasons that any user can deal with. Automation failure can occur for the following reasons:
- Filling the dust container. This will be indicated by the presence of a dusty smell.
- Ingress of large debris. Large sizes of dirt stuck in the air duct interfere with the flow of air sucked by the vacuum cleaner.
- Debris stuck in the hose. Evidence of this is a change in sound when the device is turned on.
- Pre-engine filter is dirty. During this process, an unpleasant burnt smell appears.
Let's consider the possibilities of repairing a faulty Samsung vacuum cleaner, and what to do when the vacuum cleaner does not turn on. You can fix the above problems yourself, but it’s still better to avoid them in the first place. To do this, you will need to disconnect the equipment from the power source, then disassemble the device and clean the debris accumulated inside.
To access the dust container, remove the top cover. Some dust containers can be cleaned, or you can replace them with new ones. It is also advisable to wash the dust collector and dry it. In order not to spill dirt and dust, you should close the existing valve for a tight seal. When installing the dust collector back into place, make sure that the neck fits snugly against the bag holder. If this does not happen, then dirt and dust will seep into the structure, which will lead to overheating of the motor and accumulation of dirt on the components.
Filters require additional care. Be sure to read the instructions and find out how many filters are installed in your particular vacuum cleaner model. All filters installed in the structure should be checked. Some types of filters can be washed with running water to clean them. But before installing it in the structure, you should definitely dry it. Starting a vacuum cleaner with a wet filter will cause damage. Periodic replacement is carried out according to the manufacturer's recommendation. When the filter has served its useful life, it is replaced with a new one. The filter life is indicated in the operating book.
All replacement consumables, filters, brushes and other accessories can be purchased at a specialized store.
To remove blockages in the nozzle, unscrew the corrugated accessory from the body, inspect its integrity, remove the accumulated dirt and screw it back. Dirt stuck in the bellows prevents air flow.
But still, if the vacuum cleaner does not turn on, what should you do? If the repair of the breakdown is serious, it is better to contact specialized technicians who can solve this problem.
But it is worth remembering that the main possible breakdowns occur due to engine overheating. You should adhere to the following rules:
- To prevent overheating, use the vacuum cleaner for no more than 30 minutes when cleaning. At maximum mode, use the device for no more than 10-15 minutes. Longer operation may lead to overheating; to do this, allow the device to rest and cool down.
- Make sure the dust bin is full to remove accumulated dirt and dust. An excess of dirt and dust will not allow air flow to pass through, which will lead to overheating of the electric motor. Also, an excess of dust in the dust collector will lead to clogging of the structure inside the device.
- Clean the pre-motor protection filter in a timely manner. Excessive contamination can lead to the formation of an unpleasant burnt odor.
- Avoid sucking large objects that may block the blower. Before using a vacuum cleaner to clean the floor covering, you should collect large debris and accidentally fallen items by hand.
- You need to monitor the level of noise produced. If the sound changes, this may indicate a clogged brush or bellows accessory.
Monitor the performance of your home assistant, and provide timely care for the vacuum cleaner and its replacement consumables. Then it will be easier to avoid breakdowns of equipment to maintain cleanliness in the house.
