How to fix error F03 on Hisense washing machine?

How to fix a washing machine that won't drain?

What to do if the washing machine does not drain water

Perform a master reset. Unplug the washing machine for about one minute. ...
Check the lid switch assembly. ...
Check if the drain hose is kinked. ...
Check the drain hose or pump for blockages. ...
Clean the coin trap. ...
Check water level control. ...
Washing machine repair schedule.

Interesting materials:

How to turn off silence on my iPhone? How to turn off vibration on the Home button on iPhone? How to turn off VoiceOver on iPhone when the screen is black? How to disable ending calls using the power button on iPhone? How to turn off the sound on the iPhone 12 keyboard? How to mute calls on iPhone 12? How to unpin a contact on iPhone? How to unpin a message on iPhone? How to open an IPA file on iPhone? How do I open a PDF file on my iPhone?

Other malfunctions of Hisense washing machines

The Hisense (Hisense) models have some built-in protective functions. Their presence helps to identify problems in time and take the necessary measures. Most breakdowns can be fixed with your own hands within a few minutes.

The washing machine refuses to turn on

None of the lights are on.

Check:

Is the plug plugged into the outlet?
Is there voltage in the outlet - you can use any electrical appliance

The machine does not turn on, but the “Start” light is blinking

Check:

Is the Start button pressed?
Is the hatch closed tightly enough?
Is the "Tap Closed" light on? If it is on, you need to close it and press the “Start” button.

The device turns off spontaneously while the program is running

Check:

The “Drain delay” function may be enabled - if so, disable it
If the “Start-Pause” light blinks, another program has been selected
The door may be open - you should close it
There may be a lot of foam inside the drum. If the machine itself switches to the “Eliminate foam” mode. Then she herself will continue to work

Additives and detergents remain in the drawer after washing

Check:

How correctly are the meshes in the compartment separating the air conditioner, as well as the compartment separator, and clean the parts if they are dirty?
Is there enough water being supplied? The filters between the tap and the supply hose may be clogged. Clean if necessary
The detergent separator may not be installed correctly in the main wash compartment. This should be fixed.

Machine vibration during spin cycle

Check:

Is the device installed horizontally? Adjust the legs
Shipping bolts may not have been removed. They should be removed.

The machine does not spin clothes well

All Hisense models have a system for automatically correcting imbalance if it is detected. The spin speed may be deliberately slowed down if there are heavy items in the drum. These could be sweaters, bathrobes, etc.

Check:

Is too much detergent put into the machine? An overdose can lead to excessive foaming, which interferes with the spin cycle. This is not a breakdown, but the excess product needs to be removed.
Is the spin speed set to “Zero” by accident? Adjust the spin speed.

Incorrect display readings about the time remaining until the end of the wash

These washing machines are endowed with the ability to adapt to different washing conditions.

It could be:

Excessive foaming.
Imbalance of the drum due to improper placement of things in it.
Inlet water too cold.

The machine constantly recalculates the washing time, depending on such factors. Therefore, it is normal if the time remaining until the end of the wash changes up or down, and this does not mean that it is time to send the washing machine in for repair.

Error F 03 - when you can easily fix it yourself

One-time failure of the control or display module. If code F03 is displayed for the first time, try unplugging your Ariston from the outlet for 5 - 10 minutes. Perhaps there was a one-time failure, and after rebooting the washing machine the error will disappear.
Weak contacts in the temperature sensor circuit. Check all connectors from the NTC sensor to the control module (electronic controller). Often, due to vibrations during operation of the washing machine, they move away, and therefore the machine goes into error.

Both points didn't help? This means, unfortunately, the problem is broken and repairs are needed.

How to avoid trouble

Forewarned is forearmed. To avoid premature failure, it is worth installing a stabilizer. It is sudden voltage surges that lead to a break in the electrical circuit between the module and the heating element in the Atlant SM.

Installing a cleaning filter will help prevent hard water and scale formation. Use quality detergents.

To avoid overheating of the heater, set the temperature not to the maximum settings, but slightly lower.

But how to fix the breakdown if the water is no longer heated and error F3 is displayed on the display? The solution to the problem is to replace the heating element in the Atlant washing machine.

Advice from professionals and preventive measures

These recommendations should always be followed:

Before starting any type of work, it is necessary to turn off the power to the washing machine and turn off the valve through which water is supplied.
After finishing the work cycle, you need to wipe all the rubber seals on the door with a soft, dry cloth. When wiping the outer surface of the machine and other plastic parts, you can use a damp rag. It is prohibited to use alcohol, abrasives and other chemical compounds that can cause damage to the machine.

The detergent container is washed periodically. To do this, you need to take it out and place it under running water, then put it back in its place.
The filters installed in the water supply system are cleaned annually. You just need to disconnect the water intake hose, take out the filter element, clean it of debris, put everything back in place and check the connections for leaks.
The pump filter is cleaned twice a year, all small objects accumulated there and thread residues are removed. Also, similar work is performed after woolen items have been washed. After removing the water, you need to open the lid with a sharp object, remove the hose completely, and remove the plug. Then the filter is taken out and washed, and everything returns to its place.

To avoid premature failure of the washing unit, it is recommended to install a stabilizing device. Sudden voltage drops can cause a break in the electrical circuit connecting the module and the heating element.

Another measure is to install a filter for cleaning. This measure is necessary to reduce water hardness and prevent the formation of scale.

It is necessary to use only high-quality powders and rinses.

To prevent overheating of the heating element, it is necessary to set the temperature regime slightly lower than the maximum value.

Review of models and customer reviews

The brand offers only front washing machines - narrow and full-size, with a load of 6 and 7 kg. There are about a dozen models in stock; let’s look at the most interesting and best-selling ones.

WFHV7012 - high energy class

Free-standing frontal SMA with electronic control and display. This is a narrow machine with a depth of 46 cm. Drying is not provided. The tank is made of plastic. Controlled by buttons and rotary knob. The hatch opens to the right. Diameter - 30 cm.

Capacity: 7 kg.
Water consumption: 44 l.
Spin speed: 1200 rpm.
Number of programs: 15 pcs. (including blacks, sportswear, mixed fabrics, super rinse, quick wash).
Energy efficiency class: A+++.
Washing/spin classes: A/B.
Safety: child protection, imbalance and foam level control.
Noise level (wash/spin): 57/72 dB.
Dimensions (WxDxH): 60x46x85 cm.

Beautiful in appearance, stylish design, suitable for modern interiors.
The device is compact due to its shallow depth.
Cleans well.
Consumes very little electricity.
It washes quietly and does not bounce during the spin cycle.
There is a quick wash for 15 minutes.

Complaint from a user - at the beginning of the spin cycle, the drum “beats” a lot. At the same time, the machine is set level and does not vibrate.
It does not wring out clothes well, as things are poorly redistributed in the drum. There are problems with switching to spin mode.
There is no protection against leaks.

The machine is not bad in all respects, and if there is no breakdown, users are generally satisfied with the washing machine. But, as we see, breakdowns do happen, and serious ones. Up to the exchange of a defective SMA for another.

WFEA 6010 S - low water consumption

Frontal SMA, free-standing. There is a digital display, the control type is electronic. No drying. The device weighs 56 kg. The diameter of the loading hatch is 30 cm. There is a 23-hour timer and a compartment for liquid powder. There is a memory function.

Capacity: 6 kg.
Water consumption: 40 l.
Spin speed: 1000 rpm.
Number of programs: 8 pcs. (including delicates, economy wash, super rinse, quick wash, prewash, stain removal program).
Energy efficiency class: A++.
Washing/spin classes: A/C.
Safety: partial protection against leaks, protection against children, control of imbalance and foam level.
Noise level (wash/spin): 57/70 dB.
Dimensions (WxDxH): 60x45x85 cm.

Stylish design, silver body.
Convenient and intuitive controls.
Lots of settings to use.
When spinning, it does not move on the floor and does not vibrate.
Presses clothes with high quality.
The display shows what phase the wash is in and how much time is left until the end of the cycle.
You can additionally add 1 to 3 rinses.
Operates at a pressure of 0.8–1 bar - there are no problems with reduced pressure.
The hatch opens and closes easily.

The hatch is not as big as it looks in the photo.
One of the users complains that the machine constantly displays error f01, stops and beeps shrilly. The owner of the washer reports that after he presses start, it continues washing, and so on several times per cycle. In this situation, the instructions for users would help him - error codes are indicated there: f01 is associated with a water supply failure, f03 with water drainage, f13 with door blocking, etc.

Compared to the previous model WFEA 6010, there is protection against leaks, lower noise levels, but there are almost half as many programs. The owners emphasize that the washing machine looks very nice, is spacious and inexpensive. Good price is one of the main advantages of this machine. SMAs with similar parameters from popular brands are much more expensive.

Checking parts

It is possible to determine that the heating element has failed when a program with a high water temperature is running. Some time after starting the algorithm, when the liquid has entered the tank and the washing process has begun, you need to touch the glass of the hatch with your hand. It should be warm. If it is cold, the water does not heat up. It is quite possible that the heating element burned out. It is also worth paying attention to this element if the SMA is receiving an electric shock. Usually, if there is a problem with the heater, the laundry does not wash well and acquires an unpleasant odor.

Failure of the heating element is not necessarily caused by lime deposits. This could be a manufacturing defect. But this is a much rarer occurrence. Poor assembly or a defective part usually appears in the first months of operation of the unit.

If the control module malfunctions, then program failures and uncharacteristic behavior of the unit are often observed. This element should be checked last, when all other potential culprits for the appearance of the f3 code have already been excluded.

If there is a problem with the temperature sensor, there may be not only insufficient heating of the water, but also excessive heating - up to the maximum washing temperatures, regardless of which program is running. But these are all indirect, external signs. In order to find out for sure which part failed, you need to arm yourself with a screwdriver, a multimeter and a wrench.

First of all, you need to check the heating element. In Atlant washing machines it is located behind the rear wall, at the bottom of the unit. Its main part is located in the tank, but it can be easily removed from there by unscrewing the fastening nut and pressing the bolt on which it is attached inside. Next, use a multimeter to determine the resistance of the part. It should not be less than 200 Ohms. Otherwise, the spare part must be replaced with a new one.

After removal from the tank, the fault can be determined even by eye. If the heating element is completely covered with scale, there are rust stains, defects, insulation cracks, and unevenness on it, this indicates its failure. You shouldn't use such a part; it's not that difficult or expensive to install a new heater.

The temperature sensor is also checked using a tester. The easiest way is to remove the thermistor located on the heating element. To do this, you do not have to penetrate into the tank cavity. The probes are connected to the sensor contacts, and the resistance is measured.

You should also check the wires connecting the heating element and the electronic module. If there are signs of oxidation of the contacts, they should be cleaned. This alone can help get rid of the F3 indication.

conclusions

The Hisense brand deserves attention and some trust. This is an old state-owned company that takes production seriously.
SMA "Hisens" belongs to the middle price segment. When compared with analogues of other, more well-known brands, the prices for Hisense cars are lower.
The brand’s assortment is small, and the models presented are very similar to each other, the differences in parameters are minor.
The company provides information support and service support if repairs are necessary. Anyone can call the single information center.

Among the people who bought Hisense washing machines, many are satisfied - for little money they managed to get an impressive SMA with excellent characteristics. Undoubtedly, the Chinese industry is capable of producing high-quality and modern equipment, and the Heisens brand represents it worthily.