What to do first?
If you find a puddle under your LG washing machine, you should act quickly. Even if a lot of water has spilled, you should not panic. Work order:
- The first thing you need to do is turn off the power to the device. This must be done immediately, but without stepping into a puddle. If you cannot reach the plug and socket, turn off the switch at the electrical panel.
- Turn off the water supply to the washing machine - turn on the tap.
- Use rags to remove spilled water from the floor.
- Drain the water from the machine through the emergency drain.
- Remove the laundry from the drum.
Only after urgent measures have been taken can we proceed to diagnosis and search for the cause of the leak.
Why is it almost impossible to overweight
In the vast majority of cases, the task of re-hanging the washing machine door is impossible. Equipment manufacturers simply do not provide this option. The point is not in the hinges, but in the hatch locking device and the key “hole”, which are located on the right. Therefore, in order for the machine to close normally, the hatch must swing open to the left, as was originally intended by the engineers.
In theory, moving hinges and doors from left to right is, of course, possible. True, you need to arm yourself with tools and move the hatch locking device to the opposite side. In addition, you will have to drill a new keyhole for the door hook. And these are additional holes in the body.
There is no point in re-hanging the door on machines where this option is not provided - this will only harm the washing machine.
If you need an automatic machine that opens to the right, you can take a closer look at these models. The variety of equipment is great, so finding the right washing machine will not be difficult.
Causes of leakage and solutions
When looking for the cause of a leak, LG will help determine the location of the leak and at what stage of the wash cycle the water began to pour out.
Water leaking from the left corner at the bottom of the housing
There is a drain filter at the bottom of the LG washing machine. An emergency drain hose is located next to it. There can be several reasons for a leak:
- poorly secured plug on the emergency drain hose;
- loose drain filter;
- the drain filter is clogged;
- pump clogged/broken;
- broken/clogged pipes.
After removing the panel at the bottom of the front side of the LG washing machine, access to the filter opens.
Before unscrewing it, you need to place rags to absorb any water that may still be in the washing machine. The filter is unscrewed, cleaned and washed in water .
After processing, it is installed in place. If it is damaged, the part should be replaced with a new one. When installing the filter in its intended place, you should ensure that the installation is carried out efficiently. If installed carelessly, a leak may occur from this location again.
You can watch the video on how to clean the drain filter in an LG car:
When dialing
If water begins to pour out even at the stage of entering the LG washing machine, you should check the condition of the pipes and inlet hose . In order to carry out an inspection, you will have to partially disassemble the washing machine.
The inspection should be carried out methodically, starting with the analysis of the filling hose, gradually moving to the nozzles. If damage to the pipes or hose is detected, they should be replaced with new ones, since repair is not advisable.
All pipes must be connected very securely, checking the quality of the pipes.
From below
Water spreading under an LG machine can be either a relatively simple breakdown or a serious one that will cost several thousand rubles.
The cause of the leak may be:
Worn or damaged pipes leading to the dispenser, tank, etc.- Damaged tank...
- Destroyed bearings.
- Clogged or damaged pump.
- Violation of the integrity of the hoses that supply and discharge water.
- Wear of gaskets.
- Broken seal of the heating element seat.
All these areas and working units can only be analyzed when disassembling the washing machine. For some types of breakdowns (for example, when replacing a tank), repairs are only possible in a workshop, since free space will be required to completely disassemble the machine, and special tools.
Replacement of hoses and pipes is usually carried out on site . The same applies to replacing gaskets that no longer perform their intended functions.
In addition to the reasons listed, water leakage can be a consequence of previous repairs (successful or unsuccessful), when an old solder joint or previously treated joints begin to leak water some time after the previous repair. In such situations, repeated repairs cannot be avoided.
Why water flows from below the washing machine, read in this article.
From the tray
A leak from the tray can be caused by:
- impaired passage of water from the dispenser into the pipe;
- damage to the plastic of the powder receptacle;
- high pressure in the water supply.
First, you should inspect the tray itself and make sure that there is no damage to the body and that nothing interferes with the passage of water.
If there are also no problems with water pressure, then you will need to check the outlet pipe for defects and the quality of the joints. To carry out inspection, it will be necessary to remove the back and top panels.
From the hatch
Leakage from the LG hatch door can occur on the outside and inside of the washing machine.
Circumstances that lead to the appearance of water on the floor may include the following:
- Violation of the integrity of the rubber seal.
- A foreign object has gotten between the rubber band and the door.
If the reason is sloppy stacking of laundry, then no repairs are required. In the future, you just need to be careful when placing things in the washing machine.
A cuff defect is determined quite simply . The rubber band should be examined carefully. If there are holes, the cuff must be replaced. The part should not be repaired. Read how to replace the cuff here.
Inexpensive machines with right-hand hinges
Hanging the door of a washing machine is quite problematic, so it is better to immediately pay attention to models whose hatch opens in the desired direction. The catch is that there are not many machines with right-handed hinges, and not all manufacturers offer such equipment for sale.
Thus, the Candy AQUA 1D1035-07 automatic machine received a lot of positive feedback. This narrow, front-loading washing machine amazes users with its high-quality build, compact size, rich software, and quiet operation. The cost of the model is about 20 thousand rubles.
Main characteristics of Candy AQUA 1D1035-07:
- maximum drum capacity – 3.5 kg of laundry;
- energy efficiency and washing quality class – “A”;
- maximum spin speed – 1000 rpm;
- 16 special cleaning programs;
- wash start delay timer – up to 9 hours;
- noise level – up to 76 dB.
The dimensions of the narrow washing machine Candy AQUA 1D1035-07 are 51 cm (width), 46 cm (depth) and 70 cm (height). These dimensions and the door opening to the right allow you to place the washing machine even in the most compact room. The body of the machine is protected from leaks, the possibility of automatic balancing of the drum and control over excessive foaming is provided.
The South Korean brand LG also produces automatic cars, the door of which can be hung on the right. For example, you should pay attention to the LG F-10B8SD0 model. The washing machine can be installed permanently or built into furniture.
The LG F-10B8SD0 washing machine with a direct drive system is equipped with a reliable modern inverter motor.
The advantages of inverter motors are obvious. These motors:
- known for longer maintenance-free service life;
- do not require periodic maintenance (collectors will have to change brushes every few years);
- work more quietly, etc.
Main characteristics of LG F-10B8SD0:
- permissible load – up to 4 kg;
- electricity consumption – 0.19 kW*h/kg;
- maximum spin speed – 1000 rpm;
- absolute protection against leaks;
- 13 special washing modes;
- noise level – up to 74 dB.
It is possible to record your own washing programs into the intelligence. Thus, it is possible to set custom mode settings so as not to constantly adjust the water temperature and spin speed. The machine can be controlled from a smartphone. The machine can also detect all faults in the system and notify the user about them. The cost of such a modern model is about 25,000 rubles.
If your budget allows, you can consider an automatic machine from the middle price segment. The Swiss brand Eurosoba is little known in Russia, but has long proven its reliability. So, we recommend paying attention to the narrow Eurosoba 600 washing machine, installed under the sink. The cost of the model is approximately 42-43 thousand rubles.
"Frontalka" is compact in size. The body measures 46 centimeters in width and depth, 68 cm in height, and the device weighs only 36 kg. A small narrow machine can wash up to 3.5 kg of laundry at a time. Other characteristics of the model:
- energy efficiency class – “A”;
- 12 washing modes;
- Tank material: stainless steel;
- auto-weighing function.
There is a foam suppression system and automatic drum balancing. There is also a child lock feature for the control panel. Eurosoba machine is distinguished by high build quality; the manufacturer is confident in its equipment, so it provides a four-year warranty on the device.
A significant drawback of Eurosoba 600 is its low-power spin. The machine is capable of accelerating the drum to a maximum of six hundred revolutions per minute. This is explained by the fact that the “home assistant” is built under the sink and simply cannot develop high speed, otherwise the intensity of the vibrations will be too strong. The washing machine also does not have a display.
Interesting:
- LG washing machine hatch won't close
- The door does not open after washing in a Bosch washing machine
- Where to put a washing machine in a small bathroom
- Dishwasher door won't stay open when open...
- The door of the Indesit washing machine does not close
- How to place a dishwasher in a Khrushchev building?
Reader comments
- Share your opinion - leave a comment
Call the master
If you can’t figure out the leak in your LG machine on your own, you can contact a household appliance repair company. It is not difficult to find such companies on the Internet by indicating the name of your city in the search query.
To avoid falling for scammers and incompetent professionals, it is better to contact companies that have been operating on the market for a long time and have positive reviews.
The cost of the technician’s work will depend on the severity of the breakdown and the complexity of the repair. Payment for spare parts required is made separately.
The average price for work in Moscow is:
- replacement of the drain hose – from 1,500 rubles;
- eliminating drain blockage – from 1,400 rubles;
- replacement of detergent dispenser – from 1,200 rubles;
- cleaning the drain filter – from 1,300 rubles;
- pipe replacement – from 2,000 rubles;
- pump replacement/repair – 2,100 rubles;
- tank replacement – from 4,600 rubles, etc.
To invite a specialist, you should call the phone number listed on the company’s website or leave your contact details for communication. When applying you should indicate:
- type of malfunction;
- car make/model.
After the repair has been carried out, the machine is started without adding laundry. If the work is successful, the master issues a guarantee for the repairs performed.
