Household appliances for washing clothes and bed linen greatly facilitate the task of housewives, but are not always available due to the high cost or overly complex device. Budget Vyatka Katyusha washing machines made in Russia are presented in three models - 522Р, 722Р and 1022Р. Their digital designation is derived from the maximum number of revolutions and 22 available functions.
Automatic washing machine “Vyatka-Katyusha”
Characteristics of the washing machine Vyatka Katyusha
Household appliances for washing clothes and bed linen greatly facilitate the task of housewives, but are not always available due to the high cost or overly complex device.
Budget Vyatka Katyusha washing machines made in Russia are presented in three models - 522Р, 722Р and 1022Р. Their digital designation is derived from the maximum number of revolutions and 22 available functions. Automatic washing machine “Vyatka-Katyusha”
Installation Features
Any of the above Vyatka Katyusha models comes with detailed operating instructions. It is written in an accessible form and is accompanied by a number of visual diagrams. In order for the equipment to function correctly, it must be freed from its industrial packaging and fixing bolts.
Vyatka automatic
The Vyatka Katyusha automatic washing machine is picky about its location. It must meet the following characteristics:
- Along the perimeter, be sure to maintain a distance of 1.5 cm from the device to the walls.
- It is important to adjust the legs from below so that the gap between the washing machine and the floor is at least 1 cm.
- It is important to level the device, ensuring a minimum tilt angle. Ideally, the Vyatka Katyusha machine should stand strictly horizontally, which will help avoid frequent repairs of worn parts.
- Nearby it is necessary to have communications from where the device draws water, a sewer outlet for draining waste liquid and a grounded socket. If the residential premises have old wiring, for such household appliances it is recommended to change it or make another branch from modern materials.
The manufacturer recommends placing the washing machine on a bare floor or an anti-vibration mat. The use of pile carpets is strictly prohibited.
Available Vyatka Katyusha automatic options depend on the model. All devices have the same number of functions - 22. However, their spin speeds are different. Those who are satisfied with almost damp laundry can purchase model 522P.
If you want to take semi-dry clothes out of the washing machine, you should opt for 1022P.
Housewives often do not use the maximum number of revolutions in order not to spoil things and ensure smooth operation of the equipment, so the most successful option is with average indicators - 722P.
Vyatka-Alenka model 772P
The models have several other significant differences:
- Washing machines Vyatka Katyusha 522Р and 722Р have an enameled tank, while in 1022Р it is made of stainless steel.
- Leakage protection is provided only on the latest version with the maximum number of revolutions for this series.
Otherwise, the instructions for the Vyatka washing machine indicate the following characteristics, which are the same for all three models:
- The maximum drum load does not exceed 3 kg.
- The door is located vertically at the front.
- Overall dimensions 60x42x85 cm.
- The body color is white, as shown in the photo.
- Economy wash mode available.
- It is possible to select the required water temperature.
Despite some design imperfections, the equipment performs well in use, being a worthy representative of the budget category of household goods.
Vyatka-Maria
Common faults
The warranty period stated by the manufacturer in the instructions is 10 years. In this case, the buyer has the right to free service in case of malfunction for the first 12 months from the date of purchase.
The most common reasons why Vyatka Katyusha 522R, 722R, 1022R washing machines require repair are:
- there is a distinct burning smell;
- the device receives an electric shock or begins to spark at the point of connection with the outlet;
- the equipment does not turn on, the indicators do not light up;
- the automatic machine is too loud, an uncharacteristic knock is heard;
- The wash has started, but the appliance does not draw water;
- after the end of the session it is impossible to open the hatch;
- the laundry remains damp, despite the spin mode running;
- there are cases of water leaking onto the floor;
- the hatch cuff was torn;
- The machine draws water, but does not heat it.
Vyatka-Katyusha
In case of such malfunctions, you should seek help from a specialist. If the equipment is less than one year old, the manufacturer must carry out diagnostics and repairs. To do this, you need to contact the store where the purchase was made, providing a warranty card and a receipt. After 12 months, all work will be paid for by the owner of the washing machine.
How to extend the life of the device
If you follow the instructions and carefully consider the troubleshooting diagrams for minor problems that are given in it, the equipment will last quite a long time.
Please note that using detergents that do not have the “machine wash” symbol will shorten the service life.
The most common reasons for calling for repairs, as statistics show, are not manufacturing defects, but blockages or improper operation.
Vyatka Katyusha 522R
Washing machines of the Vyatka Katyusha series have proven themselves well among Russian-made equipment. They are easy to install and use. Having average characteristics, these devices satisfy the needs of average buyers.
Source: https://www.1stiralnaya.ru/vybor/stiralnaya-mashina-vyatka-katyusha
Consumer Reviews
Bought for a summer house. She justified herself. It washes not only outer clothing for working in the garden, but also everything else that needs to be washed. At the same time, despite the simplicity of the design, it washes well. There is almost no load on the weak dacha electrical network. It requires almost no attention to itself. We are glad.
Mini Vyatka SM 2Maxim
Vyatka Katyusha 522 PEvgeniy
The car was purchased in 2001 (in February, I think). During all this time there was only one problem, which can hardly be called a breakdown - last year the dirty water drain became clogged. I had to take it apart and clean it by hand. All this took about an hour and a half (including the time spent studying the drainage device itself). After that the car worked like new again! Now it’s the end of May 2022 and everything is still great! If they were still selling it in stores, I would definitely recommend it.
Vyatka Maria 1022 PAndrey
How to replace the drum bearing in a washing machine Vyatka Katyusha 1022r
The problem is, where do you buy a branded oil seal? If you can find an analogue of the bearing, then a seal from the service with a bearing will cost half the repair at the price*** The boss in his Zanus now has a bearing produced by VPZ.
The same one that goes into the front hubs of front-wheel drive VAZ cars. They did not change the oil seal - they lubricated it with silicone (the master said there is a 50/50 guarantee that it will not leak - as long as it does not leak). The pleasure cost 200 re, not counting the work.
For a branded bearing they asked for 1500-1800 rubles, and they also had to wait a week for delivery from Moscow. zabyl(Kazan, Russia)Oct 18 200512:15:29 2Ara: Do you have a bearing on the drum or on the engine? I have it on the engine (Vyatka-18), just yesterday. What are we going to do? They say - take it.
I can't lift anything heavy at all. :(( sanvitso(Rostov)18 Oct.
See Vyatka Katyusha 1022 drum seal size
Attention: In some cases, it is permissible to put detergent directly into the drum.
- Program selection knob. It is located on the control panel on the far right side.
There are 4 buttons located immediately behind the handles.
The first button on the handles allows you to turn off the spin, the second activates the half-load mode, the third allows you to pause the wash, and the fourth turns the machine on and off.
- In addition to the indicated elements, there are two light bulbs on the control panel of the Vyatka Katyusha washing machine.
One indicator notifies the user that the machine is turned on, and the second indicates that heating is occurring.
Prices are for labor only, excluding the cost of parts required for replacement. *When carrying out repairs, diagnostics are free. If you refuse repairs - 400 rubles.
Contacts of the Service Center Contact the contact center of the SOS-Service workshop to leave a request for repairs Characteristics of SM Vyatka Katyusha 1022 P GENERAL DATA Installation type free-standing Loading method front Control method electronic (intelligent) Is there drying no Max.
load of laundry 3 kg Color white Dimensions (WxDxH) 60x42x85 cm SAFETY FUNCTIONS Leakage protection yes SPIN Rotation speed (spin) up to 1000 rpm Speed selection yes PROGRAMS Number of programs 22 Special modes washing delicate fabrics, economical washing ADDITIONAL FUNCTIONS Tank material stainless steel. steel Add.
Instructions for washing machine Vyatka Katyusha 722r
Check out both of these forums, there are many washing machine specialists there. https://monitor.net.ru/forum/viewforum.php?f=7-https://forum.qol.ru/ sanvitso (Rostov) 17 Oct. 200511:00:11 in the spring they exchanged it for a Zanussi at a service center for 2200. They dismantled the car into molecules to remove the tank and took it away.
So I didn’t see the process of pressing and pressing, I hoped that at home I would see what and how, so that next time I would do it myself. The craftsmen said that they don’t do this kind of work at home - in the workshop there is a stand and special pullers, and it’s impossible to do such work alone (inconvenient), although it is possible with the risk of splitting the drum (without skill and tools). The problem is, where do you buy a branded oil seal? If you can find an analogue of the bearing, then a seal from a service center with a bearing will cost half the price of a repair (the service center is reluctant to sell spare parts - repairs are their bread after all). EgorP (Russia) 17 Oct.
How much does the repair cost?
The final cost of repair depends on the type of damage. It will become known after diagnosis by a specialist. Now you can roughly estimate the upcoming costs using the price list below. For your convenience, prices are presented in two ways - in the form of names of work and depending on the symptoms of the breakdown.
Symptoms of a problem
Repair time
Price **
* In case of refusal of repair, you must pay 400 rubles. for a technician’s visit and diagnostics
** The price includes ONLY WORK on repair or replacement of parts, spare parts are paid separately
Vyatka 722R Instructions
Review of the Washing machine! This machine replaced the untimely departed Indesit, which worked for exactly a year and broke down exactly the next day, when its warranty expired. We got it purely symbolically for 5. Its top was cut off, i.e. Appearance for 1. This machine weighs 7. Barely 2 people carried it.
Compared to modern machines, its washing class is positioned as . The spin is not adjustable, it is set automatically by the program. On synthetics 4.00, on cotton 7. The laundry is damp, it takes another half a day to dry. The machine has 9 programs.
Instructions for washing machine Vyatka Katyusha 722 rub. So, the Vyatka Katyusha washing machine was delivered to your home from the store in its original packaging. Washing machine, Instructions Vyatka-Automatic 16, PDF, 1438. Washing machine (model 2003) Instructions Vyatka Katyusha 522 (2003), PDF, 1807.
Article 500963
The longest program is 1. The maximum load for cotton is 3.5 kg, synthetics is 2.5 kg.
We took the car as a temporary option. She has been living with us for a year now, and in November she turned 1. The machine is easy to disassemble, the tank is enameled iron, and can be taken apart in no time. The bearing can be changed, it costs 6 rubles. That’s how I wash it.
Because of this, extraneous sounds appeared in the form of machine gun fire, grinding, etc.
But the car holds on! On modern cars, if the bearing and oil seal break under such a load, you will have to take it to a service center and replace the tank completely, which costs from 4 tons.
Instructions for washing machine Vyatka Katyusha 722 rub. So, the Vyatka Katyusha washing machine was delivered to your home from the store in its original packaging. You can download the instruction manual for the Vyatka Maria 722R washing machine in Russian for free from the link below or view the instructions in your browser.
Respect to such masters! Another plus is that the water fill comes from both cold and hot water. Which saves a lot of energy. This machine is also an excellent Lego constructor for beginners! Betfair Video Courses And Strategies. Even I figured out what and how it was.
During operation, there were blockages in the tank and a short circuit in the circuit to the heating element (i.e. Everything can be fixed simply, without calling a technician.
So buy this toy for men)) Cost: 5.
General information
The first batches were sold around five hundred rubles, later the price was reduced to four hundred. Also, not all houses were suitable for operating this washing machine, because the wiring in houses built before 1978 was not suitable for such a large electrical current consumption.
In the 90s, due to the difficult economic situation, Vyatka production was almost closed. Foreign investors breathed life into it. And today the plant produces about three hundred thousand cars annually. These machines are also now exported to countries in Europe.
Washing machine Vyatka Katyusha 1022r
SMA Vyatka-Katyusha 1022r no reverse under load
We measured U where we could so far M1-M2 Stator XX - 80 V Load up to 200V both clockwise and counterclockwise M3-M4 Armature XX - 15V Load 15 V clockwise, counterclockwise 30 and 30 V M5-M6 TG resistance 180 Ohm when scrolling the multimeter clicks We checked the module separately on the table by applying F and N, 15 V is present I am reporting on the above advice on the work performed, 1 Loading the machine, waited until it reaches reverse, turned it off with the button, took out the commander, removed the block, rang the contacts (is), put it on place jumpers inserted, does NOT turn reverse.
The washing machine does not turn on (Vyatka Katyusha, Maria 522Р(РХ), 722Р(РХ), 1022Р(РХ), Maria 822Р(РХ))
It should be remembered that now you cannot open the hatch while the product is operating. Exactly this hatch lock is installed in Vyatka 16, 18 washing machines.
The button in the case is held in place with the help of latching antennae. In most cases, in order to remove the leads or remove the button from the case, you have to destroy it.
Therefore, in the absence of the original, you will have to determine which of the poles does not work using the “dialing” method without removing the button. It’s easier to do this by cutting the inputs and outputs.
Operating instructions for the washing machine “Vyatka-automatic-16”
1.3.
The machine operates from a hot and cold water supply network, hereinafter referred to as “mixed water supply”, or only from a cold water supply network with full or partial heating of the washing solution.
1.5. The main advantage of the machine is the complete automation of washing modes, including preliminary and main washes, rinsing, special treatment and spinning.
To reduce the consumption of electricity, water and detergents in the machine, an “economical tank” in Fig.
Washing machine repair Vyatka Maria 1022 P
The reduction in the service life of the device is also affected by impurities in water and voltage surges in electrical networks.
The likelihood of a defect occurring due to a manufacturing defect is minimized.
Excessive vibration and “jumping” of the washing machine when spinning clothes. The problem may be related to bearing wear: moisture gets on it, the bearing begins to rust, rot and gradually collapse.
The master comes to you, taking the necessary spare parts. and your beauty is working again! — IN 90% OF CASES ONLY ONE VISIT IS REQUIRED TO FIX YOUR PROBLEM!
- NO DIRT IN YOUR APARTMENT! — IN CASE OF A REPEATED BREAKDOWN, THE MASTER WILL COME TO YOU AGAIN AND DO REPAIRS FOR FREE!
As practice shows, this happens in no more than 5% of cases out of 100. - REPAIR AT HOME ON THE DAY OF APPLICATION! Those. you don't need to wait and waste your time.
Tools for plumbing and electrical work, for repairing refrigeration equipment, air conditioners, washing machines and dishwashers, etc. Alexander, 36 years old.
Graduated from the Moscow Automobile College at AMO ZIL in 1999, qualified as a technician with a degree in automotive engineering.
I have been repairing washing machines since 2009, the work brings pleasure, which is very rare in our time.
Repair of washing machines Vyatka in Moscow
And six years ago, Vesta was bought by the Italian Candy corporation.
Production was modernized, and the company began producing machines of several brands. The new generation Vyatkas are made from imported components in standard and narrow configurations.
They are characterized by economical power consumption and a variety of programs. Three years ago, the company produced almost a thousand cars every day! And today, models such as 522P(PX), 722P(PX), 822P(822PX), 1022P(PX) have earned respect and become popular among our compatriots.
Source: https://ur-sfera.ru/stiralka-vjatka-katjusha-1022r-41085/
Washing machine Vyatka Katyusha 1022r
Operating instructions for the washing machine “Vyatka-automatic-16”
1.1.
Automatic household washing machine type SMA-4FB model “Vyatka-automatic-16”, hereinafter referred to as “machine”, designed for washing, rinsing and spinning laundry from all types of fabrics using low-foaming synthetic detergents. 1.2. The machine performs bluing, starching, bleaching, aromatization and antistatic treatment of linen, hereinafter referred to as “special treatments”, by introducing the appropriate agents into the dispenser.
SMA Vyatka-Katyusha 1022r no reverse under load
Hello masters, please tell me what could be the problem. The story is as follows. During washing, the machine stopped turning counterclockwise, during the spin cycle there was strong sparking on the commutator, they removed the motor-turn on the anchor.
We replaced the engine, checked the machine without laundry, everything works (fills, turns here and there, drains, squeezes out). When loading, it does not turn counterclockwise, the engine hums.
We went through the command controller, found burnt contacts D1 D2 D3, cleaned (all contacts), checked the command controller on the table, it closes and opens.
Repair of washing machines Vyatka in Moscow
Since the last century, the Vyatka washing machine has been produced at the Kirov Machine-Building Plant. The first units appeared back in 1959! And after 7 years, the plant became a specialized enterprise for the production of washing machines.
In 1974, a license was purchased to manufacture machines using Italian technology, and Soviet analogues of the Ariston and Indesit brands began to enter the market.
In the 90s, the plant turned into Vesta OJSC and continued producing washing machines and semi-automatic machines. And six years ago, Vesta was bought by the Italian Candy corporation.
My name is Hanar, I graduated from the Kazan Higher Military School in 2002.
by profession an engineer for the operation and repair of multi-purpose tracked and wheeled vehicles, served until 2006.
worked since 2006 at LG as a foreman, then as a service foreman (engineer), repairing and installing washing machines and dishwashers, refrigerators, ice generators, refrigeration equipment, gas and electric water heaters (boilers, water heaters), boilers, as well as soldering copper tubes
The washing machine does not turn on (Vyatka Katyusha, Maria 522Р(РХ), 722Р(РХ), 1022Р(РХ), Maria 822Р(РХ))
We unfasten the hatch cuff from the body of the washing machine, remove the body lock and connect terminals 3L and 1C, contacts C and L on the lock itself.
We turn on the machine, if there is no change, the cause of the malfunction is the button.
Otherwise, if the original is not available, you can reliably connect the above-mentioned pins to each other, insulate them, and install the lock in place. Thus, you have excluded the electric lock from the circuit; you still have the mechanical latch.
Washing machine repair Vyatka Maria 1022 P
Equipment that entered the specialized market under this brand is traditionally accepted by customers as an example of quality.
Washing machines Vyatka Maria 1022 P serve for many years, rarely require repairs because they do not often create problems. However, all this can be achieved in practice only if you maintain the equipment in a timely manner and handle it with care.
Machine breakdowns due to improper use, the use of unsuitable powders, or untimely replacement of wear-out parts and consumables are common occurrences.
Is your washing machine broken? And problems arose: - Finding spare parts and a washing machine repair specialist - Delivering the equipment to a service center - Unforeseen monetary expenses may arise + loss of time and mood - And then you still need to pick up the washing machine from repair and bring it home!
-You can buy a new washing machine, but again you are faced with the loss of time, money and the search for a technician who will connect the new beauty! It’s much easier to seek help from specialists who will quickly solve your problems! To do this, you just need to call and summon a specialist who will come to you within 1-3 hours.
Call the master
A technician will come out for diagnostics and repairs upon prior request. You can make a call by phone or through the feedback form on the website. Provide the service manager with the following information:
- Make and model of the washing machine (see the instructions on the body).
- What happened, when, after what, the main symptoms of the breakdown (needed to select tools and components before leaving).
- Optimal time for repairs.
- Contact details.
The technician will tell you why the malfunction occurred and what to do only after visiting and inspecting the washing machine. Most breakdowns are fixed within 1-2 hours; removal of equipment to our service is not required. Immediately after the repair is completed, the washing machine will be ready for use. In rare cases, repairs may require more time and a return visit from the technician. We are ready to order any components and perform complex software repairs, but this often increases the work time.
How to replace the drum bearing in a washing machine Vyatka Katyusha 1022r | Legal consultation
Home → Catalog → Washing machines → Vyatka → Katyusha 1022 P The SOS-Service service center provides a full range of washing machine repair services. The master will come to you in any district of Moscow and the cities of the nearest Moscow region.
Prompt response is our priority. That is why the maximum period of “first aid” for your washing machine has been reduced to 24 hours. And if you send your application before 11 am, a specialist will come to you on the same day.
What breaks in the Vyatka Katyusha 1022 P washing machine?
- The unit does not start (does not start the wash cycle). It is necessary to check the hatch locking device (UBL): it is probably out of order and requires replacement. In this case, the machine will also not close.
- The machine does not drain water. One of the possible reasons is a malfunction of the pressure switch (water sensor). It needs to be replaced.
- The machine does not fill with water.
See Vyatka Katyusha 1022 drum seal size
So, the Vyatka Katyusha washing machine was delivered to your home from the store in its original packaging.
And of course, I want to open it and test it as soon as possible, but there is no need to rush in this matter.
Well, if you are too lazy to read the factory instructions, look at its abbreviated version, which we provided in this article.
Important: First, carefully open the package and remove the washing machine.
There is no need to tear the box, please be careful. Next, you need to remove the transport elements.
In the picture below you see a schematic image and a brief description of the procedure for removing these elements.
Replacing the washing machine drum bearing
Repair of SM Katyusha 1022
The washing machine first works, and then the rotation stops (at the beginning of the “rinse” mode - in one place). The control device works, water is poured in and out, but there is no rotation.
And then there is no rotation in any modes. I assume that the brushes are worn out (one of them, the other one, the one that can be seen, looks normal, and the contact is good, and the contact pin sits rigidly.
And the second brush on the side of the tank cannot be reached unless the engine is removed. Its contact pin is very loose) Maybe due to poor contact of the brush (when the speed increases, a rustling sound appears) the engine overheats and the thermal protection simply turns off.
In this regard, the question is: what is the engine model or the dimensions of the brushes themselves on the Katyusha 1022. The electric model is not indicated on the diagram.
Instructions for washing machine Vyatka Katyusha 722r
Now we need to drag the Vyatka Katyusha 722r machine to where it will be permanently located. By the way, the place for such placement should be prepared in advance:
- the floor is strengthened and leveled (at least relatively);
- any carpeting has been removed and an anti-vibration mat can be laid instead;
- there must be service communications (water supply, sewerage, electrical outlet) in the immediate vicinity of the machine body;
- there should be a gap of at least 1.5 centimeters around the body of the machine, the gap between the bottom of the washing machine and the floor should be about 1 cm.
Once you can properly prepare the area for the washing machine, you can drag it there and begin leveling it. The washing machine body must be installed strictly level, the difference is allowed no more than 2 degrees.
Attention: To level the body, you need to tighten the legs of the machine.
403 - access denied
TV LCD and Plasma Video equipment Audio equipment Telephony and communications Household appliances Instruments, measurements Power supplies Element base Technologies Repair organization We discuss ideas, developments, opinions Developer environment Development of digital devices Analog equipment Power electronics Optoelectronics Printed circuit boards Assembly and installation Ready-made solutions and designs Search for circuits, firmware, Data Sheets, etc. .Element base of household radio electronicsSoftware MicrocontrollersCommercial advertisements Purchase Sale Looking for a master Looking for a job Offering a jobFlame Technoflame Nature, meetings Closed FlameCart (Recycled)Guest Book Current section » Household appliances » Washing machines and dishwashers (Repair and maintenance of washing machines and dishwashers) Similar information:
- CMA VYATKA AUTOMATIC (Katyusha) Prog. Mechanism
- SMA Vyatka 1022 engine module.
Washing machine repair Vyatka
In both cases, no torque is transmitted to the drum and the washing mode simply physically cannot be started.
A stretched or torn belt must be replaced.
- The car door does not open.
Most likely, the problem is that the door handle is broken. An additional sign of this malfunction is its “laxness.” The faulty handle must be replaced.
Cost of repair NAME OF REPAIR COST Visit and diagnostics Free Replacement of the pump in a washing machine up to 1,500 rubles.
Replacement of the temperature control module from 600 to 1,100 rubles.
Removing blockages in a washing machine from 900 to 2,000 rubles.
Removing stuck objects from the washing machine tank RUB 1,500. Replacing the heating element in a washing machine from 900 to 1,500 rubles.
Repair or replacement of a faulty control module from RUB 2,000.
Overhaul (implying complete disassembly of the washing machine) from 4,500 to 6,000 rubles.
To do this, you must first loosen the locknuts on the legs, and then unscrew the legs to the desired height. It is necessary to ensure sufficient clearance between the floor and the body, and most importantly, level the machine, otherwise it will produce more noise during operation.
Next, you can begin connecting the machine. The instructions indicate that to connect a Vyatka Katyusha washing machine, a separate electrical outlet with grounding is required. It is powered from a 1.5 square meter copper wire. mm or aluminum per 2.5 sq.
mm, and this socket must be protected automatically.
We will plug the power cord into the outlet last, first we will connect the machine to the water supply and sewerage system.
How to do this is described in the article Installing and connecting a washing machine yourself.
