The question of how long it takes an automatic machine to wash may seem a little strange. However, we dare to say that there is nothing strange about it. A person may be interested in washing time in at least three cases.
Firstly, when a used washing machine is purchased and there are no instructions supplied, secondly, the washing machine does not have a display that would display the washing duration and, thirdly, a person chooses a new modern washing machine and wants to know its capabilities in terms of washing time in different modes. That’s why we decided to talk in detail about how long or how quickly an automatic machine can wash.
What affects the duration of the cycle?
It is not difficult to notice that the washing duration differs in different modes. What factors influence it:
- Temperature. Time is wasted heating water. Washing in cool water saves 10–15 minutes.
- Pre-wash or extra wash. If you add it to the main process, you need to throw another quarter of an hour on top.
- Soak. You can enable this function, but you will have to sacrifice another third of an hour, no less.
- Additional rinse. It is necessary for thoroughly rinsing things. You have to add another half hour to the main cycle time.
- Intelligent approach. Modern SMAs themselves determine the program of action. At the same time, they are guided by the weight of the loaded laundry and the degree of its contamination. The fuller the drum and the more stains, the longer the treatment will be.
- Individual features of the device. The newer the model, the faster the tasks are solved. In older versions, even the express version took 40 minutes.
How to speed up the process
Although automatic machines do not require supervision or additional actions on the part of the owner, everyone dreams of speeding up the process. Here are some effective ways to speed up washing:
- Use delayed start. You can turn on the machine at any time and leave for business or work. The laundry will be ready when you arrive.
- Don't wash one item at a time - pile up laundry for one load instead of 2-3. This will reduce the time required for servicing several washes, and reduce the cost of electricity and water.
- Do not set the upper spin modes or temperatures. This requires additional heating time and prolonged rotation of the drum during squeezing.
- Most powders wash well even in cold water; boiling the laundry is not required.
- Use liquid laundry detergents - things will be clean without additional rinsing.
If you have to do laundry often, there are children in the family, and the washing machine is a pioneer in household engineering, it’s time to consider buying a more modern model. How this will help:
- All modes of the new slot machines have shorter time ranges. A quick wash will take 15-20 minutes, but in an hour you can do a good wash.
- Machines have several different quick wash modes.
- The drum has been improved, the attitude towards things is more careful.
- In modern models, you can lay different fabrics together.
- There are doors for reloading forgotten laundry.
- The machines are equipped with drying chambers.
- It is possible to process items with steam.
Some models can be controlled from smartphones by installing a special application.
Pre-wash - how long does it take?
This program helps improve the quality of washing. The function is comparable to soaking. A distinctive feature is that the powder is poured into two compartments. One tray will be used for the pre-wash, the second for the main wash. Sequence of the preliminary stage:
- Launch of SMA. The powder is washed out of one container. The maximum amount of water is collected in the tank.
- The water is heated to 30 degrees. This temperature is maintained constantly - these are optimal conditions for removing contaminants from fabric fibers. Hot water, on the contrary, helps to fix stains from juices, fruits, and blood.
- The duration depends on what kind of automatic washing machine is used - brand and model. Maximum time - 2 hours.
- Upon completion of soaking, the water is drained. Clean water is collected into the tank for the main process.
Secondary functions
In addition to the main and additional washing modes, in Ariston washing machines you can only select auxiliary functions, for example, only drain or rinse.
- Additional rinse. When this option is activated, the washing machine will perform one more rinse during operation. This is necessary to completely remove the detergent from the fabrics. This possibility is relevant for small children, people with sensitive skin or allergies, and also simply in cases where the detergent was added in more quantity than necessary.
- Individual mode. Allows you to store your own program in the washing machine’s memory, selecting all the necessary parameters for it.
- Spin only. As a rule, the user can independently select the speed when activating this option. This function may be relevant if, after completing a program, the laundry turns out to be very damp or for hand-washed clothes. This option can also be activated after a night wash has been completed, during which the Ariston machine operates very quietly, excluding all spin stages, both main and intermediate.
- Drain. This function can be used in the event of an emergency need to drain water from the tank, as well as in the event of a breakdown of the Ariston machine, when the equipment refuses to drain the liquid from the tank.
How long does a delicate wash last?
A washing machine, even the most innovative one, can hopelessly ruin things made from thin or capricious fabrics. For products that require particularly careful handling, most SMAs provide a delicate washing process. By choosing it, users extend the life of their favorite things. And there are products for which other modes are simply contraindicated.
When applied to washing, delicacy is understood as follows:
- Large amount of water. The tank is filled to the maximum. The more water, the less mechanical stress the items being washed experience.
- Cool water. Gentle washing does not allow temperatures above 30–40 degrees - the exact maximum depends on the specific model and manufacturer. This approach is indispensable for colored items that are prone to shedding.
- Smooth drum running. Lower than normal rotation speed.
- In some models there is no spin activation at all in the delicate mode, in others the spin speed is reduced to 400–600 rpm.
- If the spin is not activated, lightly squeeze the items with your hands - almost all the water drains out on its own.
The duration of the delicate process depends on the model. On average it takes 1–1.5 hours. Maximum duration - 2.5 hours. The process is comparable to manual processing - it is possible to avoid shrinkage, stretching, and shedding. The structure of the fibers does not suffer at all. This is an ideal way to wash items made of lycra, organza, cashmere, polyester, satin, guipure, wool, silk, elastane.
The icon on the control panel is a bowl of water. At the bottom there are one or two stripes. These are water quantity indicators. There are other options for symbols - butterfly, skein of wool, flower.
Hand washing in a washing machine - how long does it take?
This is just a type of delicate washing. If the product label shows a hand immersed in water, it can only be washed in this mode at SMA. Or with your hands. The program assumes extremely careful handling with the most gentle mechanical impact. Temperature - 30 degrees. Minimum speed - 400 rpm. Duration - about an hour.
The drum is loaded at 50% - so that things do not wrinkle and are washed thoroughly. The tank is filled as much as possible - there should be a lot of water and space in it. If spinning is provided, then it is set to the very minimum - 350–500 rpm. You can turn it off if you wish. Delicate and manual modes are used not only for capricious fabrics - we listed them in the previous section, but also for products with appliqués, embroideries and other decor. This program is also useful for shoes and outerwear - you can wash jackets, jackets, and down jackets.
Advice from professionals
Washing in potato broth will help soften a wool sweater:
- To do this, place a kilogram of peeled or brushed potatoes in a 10-liter bucket of water;
- drain the boiled water and cool to 40 degrees (the temperature is checked with your elbow, which can comfortably withstand a temperature of 36–40 degrees);
- after washing the product in the machine, rinse it in this broth;
- dry in natural conditions on a flat horizontal surface;
- Brush the sweater with a soft brush to create a low, even pile.
And a few more tips:
- Before washing, remove all accessories if they can damage the product or cause a change in its color;
- on the blouse, use a regular seam through the top to sew up the button holes to prevent the product from being pulled out in these places;
- try not to wash the wool for a long time; it should not be in water for more than 40 minutes;
- If you are not sure about the quality of wool dyeing, then cut a small piece of thread from the inside and soak it in warm water. After this, wrap and dry with a light cotton cloth. This is a color fastness test. If there are no marks left on the fabric, then everything is in order - the wool does not shed;
- Do not place things made of angora, alpaca, or mohair in an automatic machine. If dry cleaning is not possible, wash them very carefully by hand.
Intensive wash - how long does it take?
This is the most serious and lengthy treatment. It is used in extreme cases - if things are heavily soiled and if their fabric allows the conditions offered by intensive washing:
- High water temperature. Maximum - 90–95 °C.
- Long rinse.
- The entire cycle may take 2.5–4 hours. The exact time depends on the specific model.
The disadvantage is the high consumption of water, electricity and time, as well as increased wear and tear on things. This is a test for both the machine and the laundry. Products made from cotton, linen, and synthetics can be subjected to intensive washing.
The drum should not be fully loaded. However, it should not be almost empty. 30–70% of the maximum load is the best option. The sequence of steps is followed:
- Soaking - 15–25 minutes.
- Slow rotation of the drum, then intense and slow again - each version lasts half an hour. Total 1.5 hours.
- Super rinse.
- Spin.
Attention! Each model has its own settings. The duration of processes is not regulated by any framework or standards other than expediency. Therefore, each SMA manufacturer is looking for its own optimal option.
You should resort to an intensive cycle less often - abuse of such a program of action exposes the device to increased wear. Equipment working at the limit will fail faster. The maximum frequency of use is once a month.
Rules for caring for the device
The machine will last a long time and without problems if you care for it properly:
- install on a perfectly flat horizontal surface - this will eliminate vibration and wear;
- ensure water connection with the required pressure, install the drain hose correctly;
- avoid overloading during washing;
- do not clog the drum and drain hoses with debris or small objects;
- wash items with metal parts in bags;
- use machine detergents.
Between washes, you need to let the machine rest for several hours to prevent overheating and rapid aging.
What preventive maintenance work is required:
- Ensure the safety of the rubber seals, avoid compression and tearing, and wash with a soft sponge.
- Do not use aggressive agents for cleaning the outside and inside, which can damage plastic and rubber.
- Clean powder containers and wash out any remaining detergents.
- After finishing washing, leave the hatch open so that the parts dry in the air and odors and dampness do not accumulate in the body.
- Do not store dirty laundry in the washing machine.
- Regularly clean the casing of debris by removing the bottom panel.
- Check the condition of the water and drain hoses for damage or disconnection.
- You can improve the quality of water coming from your tap water by installing a filter.
- Do not use folk descalers to clean the machine, but only those recommended by the manufacturer (Calgon).
- If there are problems with the water in the tap - low pressure, dirty, sandy or rusty - it is better to postpone the washing or stop it (“Pause”) if it has already started.
Once a year, the machine without laundry is run at high temperatures with powder and cleaner to descale the drum and clean the filter.
An automatic machine is an ideal assistant for washing. Any housewife can master its use. You need to carefully study the instructions and control panel in order to take advantage of all the capabilities of this convenient household appliance. Knowledge of all modes, the ability to set the most effective and necessary washing program will save time and help reduce water and energy costs.
Share link:
How long does it take to rinse in a washing machine?
The time it takes to rinse depends on the options selected. How many rinses are needed is decided either by the machine itself (the manufacturer) or by the user. The laundry needs to be rinsed thoroughly, and you cannot skimp on this. If the user considers it necessary, he sets an additional rinse, which will increase the cycle by 20–30 minutes.
On almost all brands of SMA, rinsing is indicated by the same icon - a basin with a wavy line or straight lines. Rinsing is one of the main steps. On many machines, the “rinse” button is even located separately. When rinsing, the water is automatically drained. The duration depends on the brand and model of SMA. One rinse may take 10–30 minutes.
Cotton
This option is chosen for cotton products. Cotton can withstand high temperatures without compromising its shape or properties. The maximum in the SMA is 95 degrees. Push-ups - from 1200 rpm. The duration of the cycle is 2 hours. There are also programs:
- Cotton 40 degrees - washing time 1.5 hours (90 minutes).
- Cotton 60 degrees - 1 hour 50 minutes. (110 min).
At 95°C you should not wash colored cotton fabrics, only white ones. In such hot water, dyed cotton will fade.
Water temperature
The water temperature during prewash is set by default and is 30 degrees.
With these values, it will be possible to remove complex stains from the fabric, for example, stains from:
- cosmetics,
- guilt,
- blood,
- berries,
- fruit juices and more.
However, this does not mean that the user does not need to independently set the temperature he needs. The parameters set at the initial stage will be applied during the main wash stage. If they are not adjusted, the water temperature will be the one provided for the selected function by default.
For example, for the “Cotton: intensive wash” mode – 60 degrees, and for the “Synthetics: gentle wash” mode – 40 degrees. However, during the pre-wash phase it is always 30 degrees.
Express mode
The duration of the fast method may vary among different brands/models of SMA. This is the fastest option - even in old machines it takes 30-40 minutes. And in more modern modifications it’s even less - 15–20 minutes. Why this option? It is ideal for those who wash something every day, for example:
- diapers, rompers, other baby items;
- socks, napkins, handkerchiefs;
- You can freshen T-shirts and other lightly soiled clothing.
Recommended temperature is 30–40 °C. The spin speed is 800–1200 per minute. The express version is very economical - a minimum of electricity is consumed. The entire cycle from the moment the device starts to the finish takes a maximum of 45 minutes. After light washing, rinse once. If you prefer to change your clothes daily, this option is for you. Items worn more than twice should not be washed in this manner: the machine will not be able to efficiently remove dirt under such delicate conditions.
This version is called differently in different machines - accelerated, super-fast, daily, express. The advantage of the method is the 50% use of powder. But the drum is also loaded at 50%. Otherwise, the detergent will not rinse well out of the fabric fibers.
Eco
This program is often called "bio-care". Suitable for any fabric with different levels of soiling. There are two stages:
- At first the water is warm - 30–40 degrees. Enzymes are activated.
- Then the temperature rises. The normal process begins.
Its special feature is gentle but thorough removal of old dirt. There are modifications of SMA in which it is necessary to use only powders with enzymes in this mode. Eco is an option that combines softness and intensity. Cycle duration is 120 minutes. There are no contraindications: you can wash synthetics, delicate linen, and children's clothes. This option is especially relevant if the machine does not have separate programs for the above-mentioned products.
Features of use
When using the pre-wash mode, the following points must be taken into account:
You cannot pour washing gels into compartment number 1.
Only bulk detergents are suitable for this purpose. This is due to the fact that when the function is activated, any liquid concentrate will drain into the drum ahead of time, that is, by the time of washing it will not be in the compartment.As a result, things will simply rinse in clean water.
- The mode is not used for quick washing, for example, when you need to refresh things. Express programs are designed to process items that do not have complex stains or heavy dirt, which means they do not require pre-washing.
- Conditioners, stain removers and rinse aids are not poured into the first compartment. Only powder marked “Automatic” is poured into it.
How long does the spin last?
If you take an interest in the characteristics of SMAs offered today on the domestic market, you will see that most devices have a function for adjusting the speed during push-ups. At high speeds, the laundry is wrung out more intensely, which means it contains less moisture and dries faster. The downside of high speeds is increased mechanical impact, which is not suitable for delicate items and fabrics. At low speeds, the laundry is wrung out gently, but also takes longer to dry. Its duration depends on the spin speed. Average duration is 10–15 minutes.
What other options are there?
A modern washing machine has 10–15 or more program offers. Moreover, there are options for certain things. It is useful to know how long it takes SMA to erase certain things or tissues:
- Shoes - 30–50 minutes.
- Synthetics - 1 hour 50 minutes.
- Silk - 50–60 minutes.
- “Down blanket” - there is also such a mode, the blanket is washed in 90 minutes.
- Children's things - 140 minutes.