All the indicators on the Indesit washing machine are flashing: what to do?

Reasons for blinking lights on a washing machine

Only the indicators on the Indesit washing machine can indicate problems. A failure or breakdown of some parts may occur. It happens that there is a malfunction in the modular control. After all, thanks to it, the washing machine works, when the indicators start blinking, then the signal does not pass through the module.

Capacitors often lead to breakdowns, and various contacts on the board may also stop working. If such a problem arises, then the best option would be to call a specialist. You can carry out repairs yourself, but very carefully. But it happens that a faulty electronic module has to be replaced with a new one.

You need to understand the meaning of the codes that may be displayed. If error F01, F02 is displayed or the “extra rinse” indicator and along with it the “Lock” light up, then most likely the problem lies in the electric motor and its incorrect operation.

Error code F03 or “Revolution” and at the same time “Quick Wash” are flashing, this indicates that the liquid is not heating. Code F04 is indicated by the “Super Wash” indicator lighting up. This means that the temperature sensor has failed.

There are cases when a breakdown of the water drain, heating element, drain pump, or electric motor occurs. The heating element can quickly fail if preventive measures are not followed. That is why all the lights on Indesit blink. In order to check the condition of the heating element, you need to ring it with a multimeter. If it does not work, then it must be replaced with a new one.

If it happens that the electric motor breaks down, then most likely the brushes are worn out. There are rarely any malfunctions in it. They will need to be replaced and the problem should be resolved. It happens that the breakdown is in the drain pump. To do this you will need to clean it. If the problem was different, then you will need to purchase and install a pump.

If the lock indicator is blinking, this could be for several reasons. Flashing may occur and washing may not start, and even after a reboot the error most often remains. If the indicators are on and the washing machine is working, then there is a malfunction. The lock on the door may also be damaged. This may lead to a problem in the sensor that controls the volume of washing liquid.

How does it all work?

Despite the forced nature of the operation, it will not harm the machine system at all. Firstly, the program is developed and configured by the manufacturer using special technologies. Secondly, such an “inspection” is much safer and more informative than depressurizing the machine and then disassembling and inspecting it. Thirdly, the service test works faster and will more accurately narrow down the range of possible faults. It’s easy to turn on the diagnostic program yourself.

Set the gear selector to the first position and press the “Start” button.

We switch to the second position, and then disconnect the machine from the power supply.
We return the programmer to the first program and start the washer.
Move the selector to the third mode and turn off the power again.
Turn the knob to one and press “Start”.
Select “Drain” and run the test program.

The machine will check the machine components for some time, after which it will display a fault code on the screen. You will need to decipher the combination using the factory instructions or the Internet and clarify the location of the failure that occurred. If the equipment does not have a display, the system will inform you about the error by flashing the LEDs on the dashboard.

The faulty part is searched for as follows. When you turn on the test program, a quick wash is launched on an empty tank, during which the system checks each piece of equipment for performance. First, the filling valve is examined, then the integrity of the tank and the accuracy of the pressure switch’s response to filling the drum. Afterwards, the ability of the heating element to heat water to a given temperature and the engine rotation speed are assessed. The washing machine will definitely test the drainage, as well as the spin cycle at maximum speed. As soon as problems are detected, the control board will record the error and report it to the user.

Share your opinion - leave a comment

Eliminate blinking indicators

If a person is well versed in washing machines or at least some equipment, then you can troubleshoot Indesit yourself. At a minimum, you can try to detect them in order to roughly understand what the problem is. Be sure to follow clear instructions to avoid making common mistakes.

You will definitely need to check the condition of the electronic board itself so that any breakdowns can be eliminated. To do this you will need to disassemble the unit. The task will be completed by those people who have at least a minimal understanding of technology.

What should be done:

Disconnect power from the washing machine to avoid electric shock.
Remove the cover that covers the housing. This is the only way to get to the inside of the electronic device.
You will need to unscrew the screws that hold the control board.
After this, you will definitely need to disconnect all the wiring from the connectors to which they are connected.
Now you can change the capacitors or the board itself on the washing machine.

It is worth noting that if the machine has a front-loading type, then the element of interest will be located on the back at the very bottom. At the same time, a person can easily reach it. This can be done even if there are only ordinary tools in the house.

Directly for diagnostics you will need to use a multimeter. They will need to ring all contacts, as well as capacitors. It will not be difficult to disassemble the case, but it is important to understand that each model may have its own design features. The control panel is secured with two bolts located at the back of the device. In this case, the electronic board will be held in place using small screws.

If the model has a vertical loading, then the element you are looking for will be in the upper part. When front loading, then the board will be located at the bottom and bottom.

When performing an external inspection to eliminate Indesit errors, it is recommended to pay attention to capacitors that have a round shape. Particular attention should be paid to elements such as C16 and also C17. If they break, their top part begins to swell. In this case, to diagnose a breakdown, you will need to ring all the elements with a multimeter. When you need to replace them, you will need to pay careful attention to the markings. This will allow you to choose the right model.

Errors related to the ECU board

The memory chips located on the control unit board contain all service algorithms and washing programs. If a failure occurs, the memory must be removed from the ECU (unsoldered or removed from the microcircuit connectors) and reprogrammed with a special device - a programmer.

If the connection between the display module and the ECU board is broken, this malfunction of the Indesit washing machine manifests itself in the lack of response to buttons and the inability to execute programs. If after disconnecting from the 220 V network and rebooting the ACM nothing has changed, check the condition of the connectors and the reliability of the switching connections. The most likely fault is in the display module board or ECU.

Control and display module in some Indesit CM models

The most rare reasons why a car blinks

If Indesit does not turn on, then it is worth considering even rare causes that could lead to failure. You need to pay special attention to them, because many people ignore them, and, as a result, cannot figure out the machine on their own.

It is important to accurately determine the breakdown. Be sure to check the following points:

Involuntary drainage of water, which leads to breakdown.
Electric motor failure. This is a fairly serious breakdown, so you can’t do it without a repairman.
Burnout of heating element.
Drain pump malfunction.

Let us note once again that if the washing machine does not work, the indicators will definitely flash accordingly. That is why there is no need to guess, just look at the indicators.

It is important to note that the heating element can become covered with scale over the years. That is why its wear increases significantly. The electric motor can break down due to the fact that the condition of the brushes deteriorates significantly. Fur and hair could also become tangled, which is especially common in apartments where animals live. In this case, the control module may become less likely to leave its normal state. Burnt contacts can lead to this, and this situation is quite rare.

Be sure to follow the Indesit instructions when checking error codes. The most important thing is to accurately diagnose the breakdown, so that you can then fully carry out repair work. If the cause is not correctly identified, significant amounts of money may be required to eliminate the problem. It’s better to do everything right right away so that you don’t have to worry about the problem later.

H2O

The code indicates a blockage in the drain system sector or the washing machine is not connected correctly. There are two options to solve the problem: cleaning the drain system or reconnecting the machine.

Thanks to the achievements of modern electronics, using the display provided by the Indesit washing machine, you can accurately determine the cause of a technical malfunction or inconsistency of input data. If the Indesit washing machine displays an error related to a malfunction of the control module, it is better to entrust the diagnostics and repairs to a specialist so as not to aggravate the situation.

The hatch lock indicator is flashing

If a person notices that the sunroof lock indicator is blinking, he may think that it is the locking device that has failed. However, this is not always the case, and the thing is that older models had a simpler design. Such models are reliable, but it is quite difficult to detect the exact fault. Machines do not always indicate what specific problem has arisen. For this reason, you will need to consider all possible options.

What kind of breakdowns occur when the lock flashes:

Heating element malfunction. If the tubular electric heater fails, the machine will wash things as before, but the light will continue to glow. It even happens that the equipment gets confused when functioning, freezes and confuses the programs.
Board failure.
Problem with the lock. It is important to analyze this part of the machine first.

If difficulties arise, you should contact a specialist. You should not attempt to repair a machine yourself without the proper experience. This could lead to even more damage.