How to clean a washing machine drain hose

Home appliances help us cope with difficult and dirty cleaning and washing at the touch of a button; it is now so pleasant to restore cleanliness and comfort. Breakdowns or malfunctions of a vacuum cleaner, refrigerator or multicooker can knock you out of your usual comfort. One of the common problems that arise at home is a clogged drain hose in the washing machine. This problem can be resolved by removing and cleaning the hose. Let's look at the causes of blockages and ways to solve this problem.

2 How to clean the drain hose in a washing machine
2.1 Cleaning the drain hose without dismantling
2.1.1 Use of chemicals
2.1.2 Citric acid

2.2 Removing the drain hose in different models of washing machines

2.2.1 Mechanical cleaning of the removed hose

3 How to prevent blockages - preventive measures

Troubleshooting yourself

Having discovered a malfunction resulting from a blockage in the drain of the washing machine, the first thing you need to do is ensure unobstructed access to the drain system.

Cleaning the filter

The filtration system is located at the bottom of the washing machine on the right side behind a small door with a hatch. To open it, you need to pry the edge of the hatch with your finger or a flat object. On some models, the panel is opened by pressing latches or bending the rotary hooks.

Behind the door there is a round filter that must be unscrewed in a counterclockwise direction.

The filter is cleaned in the following sequence:

After unscrewing the screw, carefully remove the filter.
Having positioned the structure at an angle, drain the liquid, first placing a container with low sides under it.
Having freed the structure from water, remove all stuck foreign objects. If the structural elements of the system are completely covered with scale, they will have to be replaced.
Having eliminated contaminants by washing with water and wiping with a damp sponge, inspect the location of the filtration system and remove contaminants accumulated on the walls.
Clean the pump system, then connect the unit to the power supply and turn on the “drain” mode. If the pumping system operates correctly, the blades and rabbit will rotate smoothly.

The subtleties and nuances of cleaning a washing machine drain are presented in the video:

Dismantling the drain pipe

The flow of liquid can also be blocked if the connections to the sewer system are clogged. To clean them, you need to disconnect the hose.

The work is carried out in several stages:

Disconnect the unit from the power supply.
Shut off the water supply valve.
Use a flathead screwdriver to remove the front lower or side panel.
The remaining waste water is drained through the drain filter.
Using pliers, disconnect the end of the hose from the siphon or sewer pipe.

In machines with vertical loading of laundry, the hose is disconnected by temporarily removing the side panel; in models with horizontal loading, options are possible

In household appliances of the Beko, Ariston, Samsung, Candy, LG, and Indesit brands, you can only get to the drainage hose through the bottom. Therefore, for convenience, it is better to place the machine on its side, having previously laid a piece of fabric under it. Unclench the clamp with pliers and disconnect the hose from the pump.

In Electrolux or Zanussi models, the hose is located along the rear wall. To access it you need to remove the back cover of the case. Having released the locking latches, you must first detach the drainage hose from the body, then unscrew the water supply hose from the valve. To completely remove the drainage hose, you need to remove the top cover of the housing, having first unscrewed the bolts holding it, and loosen the clamp securing it.

In German products, “Siemens”, “Bosch”, access to the drain hose can be obtained by removing the front part of the housing. Sequence of actions:

Remove the rubber seal from the front of the body and remove the clamp.
Remove the bottom panel of the housing and the drawer for detergents.
After unscrewing the fixing bolts, remove the hatch door lock.
Remove the front housing cover.
Unclamping the clamp, pull out the drainage hose.

Cleaning the drain hose

Clean the drain hose by washing and treating the inner walls using a special brush. Craftsmen use for this purpose not metal, but Kevlar cable made of synthetic polymer.

The end of the plumbing cable is equipped with a small brush, which makes it easy to remove all dirt

To clean the inner walls of the pipe, the cable is inserted into the hose and moved back and forth. After this, rinse the hose with running water. If necessary, the procedure is repeated 2-3 times.

The washed hose can only be fixed in its original place, following all the steps described earlier, but in reverse order.

Types of possible blockages

In order to make the right decision in time and eliminate possible blockage, it is necessary to find out what type of plug could cause the water obstruction. Therefore, before clearing the blockage in the drain pipe, you need to check whether the water is draining in the bathroom or shower stall, in the toilet, or in the kitchen. Only after this can you decide on the type of blockage and, accordingly, on the methods and means of removing them.

There are several types of blockages.

1.1. Operational

We are talking about a clog of greasy origin, which most often forms in the kitchen drain during cooking or when washing dishes, since various liquid fatty mixtures are poured into the drain hole. Moreover, these fatty deposits on the inner surface of the pipeline begin to attract hair, food waste and other dirt. How to flush the drain pipe in such cases? The best way is to use chemical reagents.

1.2. Mechanical

Traffic jams of mechanical origin most often appear due to the fault of the residents of an apartment or house. It's no secret that most of us throw toilet paper into the toilet (and children can even tear off several large pieces!) Therefore, not all the paper is corroded by water, which leads to frequent clogging.

To prevent this type of traffic jam, many families practice throwing used toilet paper and other hygiene items into the trash can located near the sink.

How to clean the drain pipe in such cases? The ideal option is to prevent such blockage, but if this happens, then this problem can be solved with the help of a plunger or a plumbing cable.

1.3. Technogenic

It happens that if the sewer system is not designed correctly, a pipeline becomes clogged. This type of blockage is the most difficult. And from a financial point of view, it’s not entirely pleasant, since the apartment was put into operation, and all the problems that arise must be solved yourself. At the same time, it is impossible to eliminate the obstruction either with a plumbing cable, or with a plunger, or with chemicals. Therefore, it is often necessary to even dismantle part of the sewer system in order to correct the builders’ mistakes.

1.4 Clogged siphon

The most important component of the structure, with the help of which used water is discharged into the sewer system, is the siphon. This device serves as a connection between the kitchen sink or bathtub drain and the sewer system.

Thanks to this device, we do not smell unpleasant odors.

Although, over time, the siphon container fills with fatty deposits, which become more and more every day. It is very easy to get rid of siphon blockage with your own hands.

To do this, you need to remove the lower part of the siphon, take hot water, add a little dishwashing liquid and thoroughly wash out the deposits that have formed.

What happens if the filter is not cleaned?

A dirty trap filter creates serious problems over time:

Unpleasant odor from the machine and washed clothes
. Debris and dirt stuck in the filter are an excellent breeding ground for germs. The dirty lump begins to sour and smell bad. The smell can penetrate into the tank, and after washing the laundry, instead of a pure aroma, receives a very unpleasant aroma.
Bad drain.
A clog in the washing machine filter prevents normal draining. If the debris is not removed in time, the filter may become so clogged that the washing machine will completely stop draining water from the tank.
Pump failure or breakdown.
There is a possibility that a foreign body may slip from the filter into the pump. This can cause the pump to jam and stop pumping water. In some cases, metal objects break the impeller blades or damage the pump body. As a result, repair or complete repair will be required.

Operating principle and system design

To know how to clean the drain system, it is recommended that you first familiarize yourself with the basic principles of its operation. The water used during the washing or rinsing process first of all enters a corrugated storage tank connected to a special cleaning filter, in which all small particles of debris accumulate.

Next, the water is discharged into the so-called impeller, after which it enters the sewer pipe. The liquid is discharged through the pressure created by the rotational force of the impeller. In accordance with these principles, almost all washing machines operate, for example, models from Atlant. A blockage can form in any of the specified areas of the system.

How to clean the drain filter in a washing machine - step-by-step instructions

We will clean the trap filter step by step, as our service technicians do.

1. For safety, turn off the water supply and disconnect the machine from the network.

You may have to lift the equipment or move it from its place. Agree that you don’t want to flood the floor with water or get an electric shock while working.

2. Find where the filter is on the washing machine and open the hatch cover, or remove the false panel from the bottom of the body. The hatch is usually fixed with a latch, and the lid is held tightly. Use a flathead screwdriver or a flat-edged cutlery knife to pry the lid open. In some models, the lid can be easily opened by hand.

The false panel is held on by latches or hooks and can be removed in two ways:

moving towards you (sometimes you first need to pry off the top of the panel with a screwdriver)
sideways, usually from right to left.

3. Prepare a rag and drain the remaining water from the washing machine.

Even if you used the emergency hose, a little liquid will still remain in the washing machine. To drain it completely, carefully turn the drain filter plug 45-60 degrees counterclockwise and let the remaining water drain into a nearby container or onto a rag. If the plug is additionally secured with a special screw, as, for example, in Candy Holiday 181 machines, then first loosen or unscrew it using a screwdriver.

4. Completely unscrew and pull out the filter.

For some brands, for example, AEG, LG, Electrolux, Zanussi, you first unscrew the plug, which acts as a water stopper, and then pull out the filter.

5. Clean and rinse the filter.

First, we take out large debris - wool, threads, foreign objects. Then we take a regular dish sponge with an abrasive layer and clean the surface of plaque. Then rinse the filter thoroughly under running warm water.

Be sure to check the hole in the machine and clean it of any remaining debris. At the same time, wipe off dirt and plaque with a damp cloth or sponge.

6. Check the drain pump.

Don’t forget to look into the drain pump, there may also be dirt left there. Shine a flashlight into the hole and remove any debris that has slipped into the pump. To check, rotate the impeller; nothing should interfere with its rotation.

7. Put the filter in place.

We insert it into the hole evenly, without distortions and tightly, but carefully. Tighten the filter plug clockwise. We screw in the fixing bolt, if there was one (for example, in Candy Holiday 181). In some models of AEG, LG, Electrolux, Zanussi, you must first insert the filter into the slot and then screw on the locking cover.

8.
Turn on the machine and check for leaks.
To avoid flooding the floor during washing, we check the equipment for water leakage from the filter. We put on a test rinse and see if there are any drops or streams from under the filter cover. If everything is dry, close the hatch or replace the false panel and the washing machine itself.

Information on how to properly clean the drain filter in your washing machine model is in the user manual. If you have forgotten where it is, use ours. For cleaning information, see the “Cleaning and Maintaining Your Washing Machine” section of the manual.

Tube connection diagram

In most cases, the drain hose is connected inside the washing machine directly to the pump. To clean it, you will need to disassemble the washing machine. Even if the drain is connected directly to the back wall, it is better to disassemble it, since there will be another tube from the pump itself to the back wall. From the machine, the drain pipe is connected to the sewer system.

Particular attention should be paid to places where the hose is bent; debris accumulates there especially actively. Depending on the model of the washing machine, there are several options for accessing the pump, and therefore for removing the drain pipe:

Depending on the model of the washing machine, there are several options for accessing the pump, and therefore for removing the drain pipe:

access through the rear wall;
access through the bottom of the machine;
access after removing the front cover;
access after dismantling the side wall.

In some models there is no need to additionally disassemble the housing of household appliances. For example, some manufacturers do not cover the bottom of the machine with any plugs, and if access to the tubes is through the bottom, then in this case nothing even needs to be disassembled.

How to clean a washing machine drain hose that is completely clogged

During operation, the drainage device of any washing machine accumulates small particles of dust, hair, soap solution, and threads. After a few years, the hose accumulates so much dirt that the water can hardly find its way out. What to do in such a situation and prevent a flood at home? For this purpose, the hose is sanitized.

How to rinse the drainage device of a washing machine according to all the rules?

First, turn off the cold water supply tap and disconnect the machine from the power source. Next, free the drain filter from possible residual water and disconnect the hose from the sewer. The main difficulty is disconnecting the drainage device from the body of the machine. It all depends on the model of the machine.

Next, using a thin cable with a brush at the end, clean the inside of the hose, turning the cable on one side and the other. After freeing the hose from large particles of dirt, it is washed under the tap with hot water several times. Later, all that remains is to put the device in place, secure it tightly and connect it to the sewer.

Where to look for a drain pump

To clean the pump, you still need to find it inside the housing. To do this, prepare a screwdriver, a wrench, a basin with low walls (to drain water into it) and a rag.

The easiest way to find where the pump is located in a washing machine is in machines from the brands Indesit, Beko, LG, Samsung, Whirlpool, Ardo, Ariston and Candy.

In Bosh, AEG and Siemens machines

you need to disassemble the front of the machine. Necessary actions:

Take out the powder tray and unscrew the screw.
Open the door in the bottom panel of the machine, unscrew the screw and remove the panel.
Unscrew the screws, remove the clamp and disconnect the cuff.
Release the clamps and remove the housing front.
Unscrew the screw, place a basin and drain the water, remove the pipe and disconnect the wires.

If it's Zanussi:

Unscrew the clamps and disconnect the drain hose.
Unscrew the screws and remove the back wall of the machine.
Disconnect the wire terminals and unscrew the drain pump.
Disconnect the pipes. Everything is ready for cleaning.

First you need to understand how the drainage system works.
From the drum, the liquid enters a special pipe (a thick rubber pipe), it is connected to a filter that traps most of the debris, then the water enters the pump, which drives it through the drain hose into the sewer. Anything can become clogged, but most often you have to clean the filter, so check it before removing the pump. First, you need to disassemble the pump; to do this, unscrew the screws, you will get two parts - a “snail” and a pump. Initially, it is worth inspecting and, if necessary, cleaning the pump impeller, then check the “snail”. Reassemble everything and check the machine on rinse and drain.

If nothing works, you will most likely have to change the pump.

So, for example, how to clean the pump in an LG washing machine

Unplug the machine from the outlet and check if there is any water in the powder tray.
At the bottom of the machine, find a special panel and open it with a flat-head screwdriver.
Unscrew the screw and disconnect the filter from the housing.
Tilt the machine back and place a basin, open the filter lid and drain the water.
Unscrew counterclockwise and clean the filter. After this, you can check whether this contamination may have caused the breakdown; turn on the machine in the “drain” mode, you should hear the pump blades operating.
By gently pressing and turning the pump counterclockwise, you can reach it from the bottom of the machine (it would be better to lay it on its side, if possible).
Disconnect the wires and pipes, loosen the clamps. Everything is ready, you can clean it.

Cleaning Features

if the connection in the structure is not threaded, you must first unscrew the screw and then remove the filter;
if the system is too dirty and cannot be removed, it is necessary to disassemble one wall of the structure and clean it from the pump side;
if scale has formed on the system, it is necessary to completely replace the system with a new one;
It is recommended to drain the liquid at an angle;
After cleaning the system, it is also necessary to check for contamination the place where the filtration system is located. In many cases, contaminants accumulate there too.

How to restore whiteness and freshness to a toilet using folk remedies

If going to the toilet becomes unpleasant because there are noticeable stains and an unpleasant odor inside, try cleaning the toilet with a brush. If you are not pleased with the result, move on to more serious cleaning methods. Folk remedies are well suited for cleaning minor and old deposits in private houses and apartments that have a plastic pipeline or a local sewer/cesspool system.

How to clean a toilet from heavy limescale with vinegar

With prolonged exposure, vinegar can dissolve hard urinary stones and limescale without damaging the surface of the toilet.

To clean the toilet:

Use a plunger to clean out the sewer system and pump out the water from the toilet.
Wipe dry areas that require treatment.
Moisten a cloth generously with vinegar and apply it to the plaque.
After 6 hours, clean the toilet and remove any remaining residue with a non-metallic scraper.

To enhance the effect, you can use heated vinegar essence or vinegar-soda solution (1 tbsp soda for 1 tbsp acid). The processing mechanism is the same as when washing with pure vinegar.

"Mole";
"Mister Muscle";

Scoop the water out of the toilet, pour in the product and flush by pressing the button on the tank.

Folk remedies are no less effective: pour ½ pack of soda with 1 tbsp. water (scoop out the water from the toilet first). After 15–20 minutes, pour a kettle of boiling water into it so that the dissolved blockages go into the sewer or street cesspool.

If you have a problem with how to clean a dirty toilet, use special or folk remedies. Use aggressive ones, like hydrochloric acid and autoelectrolytes, in extreme cases, because they are dangerous for the drain system.

For complex household appliances, which includes a washing machine, preventive maintenance is necessary. Otherwise, active use will quickly damage the machine.

One type of regular equipment maintenance is cleaning the washing machine filter. It is needed for the normal operation of the drain pump. The filter serves as a barrier that protects the pump from foreign objects entering the tank, lint from fabrics, wool, hair and other debris. A clogged filter makes it difficult to pump water out of the tank and can cause pump failure.

Therefore, we have prepared an instructional article about cleaning the filter and the main problems that washing machine owners encounter during cleaning.

How to clean a drain hose that is partially clogged

This often occurs due to a clogged drainage system. There are two ways to solve this issue, and you can do it yourself. Method one is to clean the drain hose without disconnecting it from the washing machine. In case of partial blockage, when the water begins to drain more slowly, it is possible to eliminate this problem without disassembling the drainage system. This is usually caused by the settling of detergent particles and small lint and fibers that have passed through the drain filter.

There are various products available on the market to dissolve deposits that form on the inside walls of the drain hose. Before use, you must study the instructions for use, usually it is a powder or solution, sometimes found in tablet form. There is no need to worry that the use of these drugs may damage gaskets or seals. Washing machines produced by well-known global manufacturers have high quality components.

If you have doubts about the quality of the connections and gaskets, you can wash the drain hose with baking soda. To do this, you need to add 100-150 grams. soda directly into the drum and turn on the washing machine without laundry in the “cotton” mode.

If water removal from the washing machine completely stops, a second cleaning method will be required, in which you will need to completely disconnect the hose from it. For this you will need the simplest tool - a flat or figured screwdriver and pliers. The sequence of actions in this case is quite simple:

Disconnect the washing machine from the power supply.
Shut off the water supply.
Carefully disconnect the hose from the machine, first placing a container to drain the remaining water.
Disconnect the drain hose from the sewer and clean it.

To de-energize the washing machine, simply remove the plug from the socket. There is usually a tap on the hose that supplies water from the plumbing system; it should be closed. Basically, the drainage hose is attached to a pipe, which is located on the back of the washing “unit”. Using a screwdriver or pliers, you need to unclench the retaining clamp and remove it. For ease of access and operation, first place the washing machine on its side, placing a floor or other cloth under it. Sometimes users do not connect the drain to the sewer, but simply place the other end of the drain hose in the bathtub or sink.

Cleaning should be done with a Kevlar cable, at the end of which there is a small brush; you cannot clean it with metal objects. After cleaning the hose in one direction, the operation should be carried out in the other, then rinse well under running hot water.

To be more sure that the hose will not have to be removed again, it is recommended to inspect the filter as well. Perhaps it also requires revision and cleaning.

Different manufacturers have their own housing designs and filter mounts that require access. Trademarks LG, Veko, new Indesit models, the bottom is closed with a lid that can be easily removed with a flat screwdriver. Zanussi, Electrolux to access the filter you will need to remove the back panel. German manufacturers of washing machines - Bosch, Siemens - made the front panel removable. Then, depending on the design, the filter is removed. It is attached to the body using latches or a screw connection (bolt, self-tapping screws), sometimes it is screwed into the drain pipe. To dismantle it, you may need to remove the neck to which the drain hose is connected. The work must be carried out carefully, without damaging the gaskets and seals.

The filter should also be thoroughly cleaned and rinsed under running hot water. Then reassemble in reverse order. All connections must be tightened well, especially the hose clamp itself. The pressure when water comes out is small, but it is still there.

After the machine is assembled and connected to the power supply, it is advisable to wash it with a cleaning agent to completely remove small particles. In addition, you should inspect the connections for leaks and, if necessary, tighten the clamp.

For prevention, once every 1-2 months it is advisable to wash the machine to remove clogs and scale; in areas with high water hardness, use water softening agents. It is also recommended to use a special bag for washing.

https://youtube.com/watch?v=xZn7-uTPoYQ

Cleaning without disassembly

Natural blockages can be removed without disassembling the washing machine. This option takes less time and effort.

In addition, it is recommended to use it if the equipment’s warranty period has not yet expired. The main method of combating drain hose contamination is the use of chemicals.

Scale dissolving agents are used as substances that will help deal with blockages. They can be purchased at household chemical stores and supermarkets.

Algorithm of actions:

Cleaning agent should be added to the powder receptacle in the required amount recommended by the manufacturer.
Then select the washing mode with the highest water heating temperature.
If possible, cancel the spin function and start the program.
When finished, turn on the wash cycle again to remove any remaining detergent.
Take out the tray, wash it, dry it and put it back in place.

Clean the hose when it is completely clogged

Disconnect the washing machine from the power supply. Shut off the water supply. Carefully disconnect the hose from the machine, first placing a container to drain the remaining water. Disconnect the drain hose from the sewer and clean it.

To be more sure that the hose will not have to be removed again, it is recommended to inspect the filter as well. Perhaps it also requires revision and cleaning.

During automatic washing of clothes, not only waste water, but also garbage and items forgotten in pockets sometimes end up in the drain

Therefore, it is important to regularly clean the system from blockages. How to clean the drain hose of a washing machine without the help of a professional? The main thing is to know the sequence of actions that we will tell you about

Solution

If you have difficulty extracting it, there are methods that can help in this situation.

Using Tools

It is possible that if enough force is applied, the hole can be opened. For this purpose, you can, for example, use pliers.

Knock

There is a chance that debris that is clogged in this part may move and allow it to open. To do this, you need to unplug the machine and remove the water from it.

After this, you need to tilt the washer back 45 degrees. This must be done in such a way that the hole is located on the side that is on top. You need to tap it with your hand. In this situation, there is a chance that small objects will move down and no longer prevent the lid from opening.

Dismantling

In this case, you will have to first disconnect the drain pump to solve the problem. This option is much more complex than the others. However, it is also more effective. It makes sense to use this in situations where another method could not solve the problem.

It is recommended to resort to this method in cases where the owner of the washing machine knows what he is doing. If there are concerns that something will go wrong, then it is better to invite a specialist from the service to carry out repairs.

There are several ways to disconnect the pump. But first you need to gain access. For top-loading machines, this can be easily done by opening the left or right wall, depending on the brand of the washer.

Access through the bottom

In some washing machine models, the bottom of the machine is not closed or can easily be opened. To work, you need to unplug the machine and drain the water from it. Then it is either laid on its side or positioned at an angle of 45 degrees. In the latter case, it is recommended to rest the device against a wall. The pump can be easily detected because it is connected to the drain.

In some brands, the bottom is open, but access to the part is blocked by a steel bar. This design, for example, is provided in Bosch brand washing machines.

If the Aquastop system is provided, which protects the device from leaks, then it will not be possible to gain access to the drain pump in this way. This is due to the fact that there is a system sensor at the bottom of the washer.

Through the back wall

The designs of some brands of washing machines provide for the location of the drain pump next to the rear wall. In this case, you can unscrew the 4 screws that support it and remove it.

Through the front wall

Sometimes it is not possible to use other methods. In this case, the problem can be solved by disconnecting the front wall.

In order to gain access, you must perform the following steps:

The top panel needs to be removed.
It may be necessary to remove the clamp used to secure the door.
In some cases, it may be necessary to remove the bin that is intended for detergents.
It is necessary to remove the control panel by unscrewing the screws that hold it in place.
The fastening screws securing the hatch locking device are unscrewed.

After the above steps have been completed, it becomes possible to remove the front facade. It is usually secured with 3-4 screws. Two of them are usually located at the bottom. They can be covered with a lower panel-bar, which will first need to be removed. The remaining screws can be located in different ways depending on the brand of washing machine.

Causes of urinary stones and limescale

If dirt and deposits appear in the toilet, take immediate action to avoid unpleasant odors and sediment buildup.

The following types of pollution are formed inside the toilet:

Urine stone is the result of laziness and carelessness of the owners. Most often, yellow, inconspicuous stains form on the plumbing fixtures of people who forget to flush after themselves. Initially, drops of urine dry out and form a thin hymen. With repeated failure to rinse, a more durable film is formed - urinary stone. You can only get rid of it using special methods, but it is better to prevent its occurrence by carrying out prevention.
Limescale – minerals contained in water (well or river, tap water). The more often you wash off, the more actively a film forms. You need to get rid of it regularly, because over time it clogs the holes supplying water to the toilet, which leads to a complete breakdown of the plumbing.

Enameled plumbing is less prone to the formation of plaque that cannot be removed, but on rough surfaces it appears more often and more intensely.

How often should you clean the drain filter in your washing machine?

Manufacturers recommend cleaning the filter every 2 to 4 months.

. Focus on the frequency of washing. That is, the more often we use the machine, the more often we clean the filter. For example, when using a machine daily in a large family with children, it is better to clean the filter once a month.

In addition, based on experience in servicing washing machines, it should be noted that the frequency of cleaning the drainage trap also depends on the type of fabric. For example, in winter, woolen and pile fabrics are washed more often: flannel, flannel. They produce a lot of tissue substrate in the form of lint, which clogs the filter. Therefore, the trap should be cleaned more often.

If you are washing something completely trashy, for example, a feather pillow or a down jacket made with natural down, then we recommend cleaning the filter immediately after washing.

Rules for caring for your washing machine

If you regularly take care of your assistant, you can do without disassembling the structure and unscheduled replacement of its elements. And to do this you just need to follow a few simple rules.

To prevent an unpleasant musty smell and mold from appearing in the washing machine, try to keep the drum open, and close it when taking a bath or shower.

Recommendations and useful tips for care:

After washing, always wipe the door glass, drum and rubber band dry, and rinse the powder container under good pressure with warm water and dry.
If you have hard water in your area, you can equip the water supply hose to the machine with a magnetic filter. The flow will pass through a magnetic field and change the crystalline structure of the water, as a result of which scale simply does not form.
Wash blankets, sweaters and other fleecy items in a special fine-mesh bag.
Do not leave wet clothes in the washing machine even for a couple of hours - in addition to the unpleasant smell, the consequences of such forgetfulness will soon appear as black mold spots.
Promptly remove powder stains, water drips and grease splashes (applies to appliances installed in the kitchen) from the appliance body.

Depending on the time the stain appears, the options for getting rid of it will differ. To remove fresh dirt, simply wipe the plastic with a cloth soaked in water or a solution of dishwashing liquid. And baking soda paste will help deal with old yellow spots and stains.

The frequency of preventative cleaning with home or professional products depends on the quality of the water in your system, the use of softeners and how often you use the washing machine.

On average, the procedure for disinfestation and descaling should be carried out once every 2-3 months. And do not forget to rinse the filter and drum cuff to remove lime particles after all cleaning compounds.