Ariston AVL 95: Instructions and manual in Russian

There is no spin in the Ariston washing machine: what to do?

Start by setting up the right program. Open the instruction manual and read again which functions include spinning and which do not. Adjust the rpm power. To correct the imbalance and check the drainage system, drain the water from the tank. How to do it:

Unplug the machine.
Remove the plinth panel under the loading hatch.
Unscrew the filter plug. Don't forget to provide a water container.

Now open the door and distribute or add items. Try running the wash again. To clean the drain, prepare a basin or bucket. Now do this:

Disconnect the drain hose from the SMA body and direct it into a container.
Rinse the element with water pressure to remove debris and install it in place.

There may also be a blockage in the drain. To solve the problem, you can use special tools or call a plumber. If the recommendations do not help solve the problem, then move on.

Checking the pump

When the machine does not drain water, the reason may be not only a blockage, but also a breakdown of the pump. The spin mode begins only after the water after washing goes down the drain.

The washing machine pump is located under the bottom, so checking will not cause difficulties. Follow the instructions:

Disconnect equipment from the network and communications.
Remove the detergent drawer.
After draining the water, turn the SMA on its side.
Unscrew the screws and remove the bottom (if provided in your model).
Disconnect the pump wiring, unscrew the screws of the volute (pump body).
Loosen the clamps, disconnect the drain hose and pipe.
Remove the pump from the housing.

Inspect the element for blockage. Perhaps threads and hair got wrapped around the impeller, which blocked the operation of the unit. Then it is enough to remove the dirt and assemble the car. Another issue is the combustion of the electrical winding. Here you will need to completely replace the pump.

Inspection and replacement of the pressure switch

If the Hotpoint Ariston washing machine does not spin, the problem may be in the water control sensor - pressure switch (level sensor). During normal operation, the device sends a signal to the module about the water level in the drum. After this, the controller gives a command to drain the water and start the spin cycle.

To check the pressure switch for serviceability, start with a little disassembly:

Remove the top cover of the case by unscrewing the screws at the back.
Find a round object with tubes near the side wall. This is a pressure switch.
Disconnect the wires and tubes from the part and unscrew the fastening screw.

Inspect the pressure switch contacts for signs of oxidation. Rinse the element with water to remove contaminants. Now start checking:

Connect a tube to the sensor and blow into it.
If you hear clicks, the device is working. If not, replacement is required.

Choose a sensor specifically for the Ariston washing machine and install in the reverse order.

Replacing the engine and tachometer

The motor drives a belt that turns the tank pulley. The engine does not work - the drum does not rotate. It's simple.

What function does a tachometer (Hall sensor) perform? It is located on the motor shaft and controls the speed by sending messages to the module. Therefore, when the machine does not start spinning, these components are checked first.

How to repair:

Unfold the equipment body to remove the back wall.
To do this, disconnect the hoses and unscrew the bolts.
Remove the drive belt.
Disconnect the motor wiring, unscrew the mounting bolts, and remove the motor from the housing.

Immediately inspect the Hall sensor. Secure the part in the socket and reconnect the contacts. If the drum was frequently overloaded and there were strong vibrations, the contacts could become loose, leading to a stop in operation. If it breaks, the tachometer is replaced.

Also check the motor brushes, which are located on the sides of the housing. This is one of the common causes of breakdowns. If the graphite brushes are worn out even halfway, install new parts.

Watch the video on how to connect and check the washing machine motor:

What else could have broken in the engine:

The slats are damaged. They are attached to the motor shaft with glue, so they peel off when overheated. You can fix the problem using a lathe by turning out the manifolds.
The stator and rotor wiring have shorted out. Combustion and short-circuiting of the windings is a serious matter and requires replacing the motor. Trying to change the windings is unprofitable. Use a multimeter to diagnose. Place the probes on the lamellas and measure the resistance. Normal values range from 20 to 200 ohms.

Main Module Inspection

Is the machine stuck in the spin cycle? In this case, error code F18 may appear on the display. This indicates the need to reflash the board. Only a master can handle such repairs. In some cases, it is more profitable to buy a new module than to repair an old one. Therefore, it is worth focusing on the diagnostic results.

Remember! If the washer is still under warranty, do not open the case and try to figure it out yourself. Contact the support center, otherwise you will void the warranty.

Monitor the operation of the equipment. Usually, before a final breakdown, the machine warns the user with a knock, hum, or poorly wrung out laundry. These are the first signs, and a timely response to them will save the family budget.

General recommendations for washing clothes in Ariston machines

Before you start working with the Ariston washing machine, you should repeat several rules for high-quality washing of clothes:

Always check product labels for instructions before cleaning.
Separate white, black and colored from each other.
Do not wash items that differ in composition together: cotton, synthetics, denim, lace - they should all be washed separately.
Fasten clothing with buttons, snaps, and snaps before loading everything into the drum.
Do not place bras or items that contain small parts in the Ariston washing machine: beads, rhinestones, hooks, etc.
Old or stubborn stains must be pre-treated with a stain remover before being placed in the drum.
Use softeners, conditioners, rinses and other detergents that improve cleaning quality.

The final part of the instructions for the Ariston washing machine

By following all the rules and recommendations regarding the operation of the Ariston washing machine, you can ensure durable and reliable operation of the unit. The advantages of the washing device are its ease of operation, reasonable price, ability to work with different products and provide an accelerated, silent, delicate or intensive washing process.

If a problem occurs, the cause can be easily determined by the code that appears on the display, the explanation of which is in the instructions for the Ariston washing machine. Most often, the causes of problems are improper handling of the unit, numerous power failures, or failure to comply with the required standards when installing the machine.

Basic recommendations for working with Ariston washing machines

The instructions supplied with the product do not always explain all the nuances regarding its operation. There are several general recommendations for working with Ariston washing machines that will help extend the life of the mechanism and ensure its high-quality operation without breakdowns:

The washing machine must be placed on a flat floor so that the body does not move during the spin cycle.
There is no need to load the drum halfway or even turn on the Ariston unit for one product. This will lead to wear and tear on the working system.
You should also not overload the drum, so as not to put too much stress on the washing machine.
If things are not persistent and seriously soiled, use heating no higher than 30 degrees to save on electricity supply.
It is advisable that the spin level vary from 600 to 800 rpm. With constant active operation of the machine drum, the condition of the oil seal and bearings deteriorates.
Do not pour a lot of powder into the container so that a large amount of foam does not form during the washing process.
Turn the selector exclusively clockwise.
Do not forget to take care of the hatch cover and wipe it dry at the end of the process. Otherwise, plaque will accumulate on the glass, this will deteriorate the condition of the rubber, and liquid will seep under the cuffs. The drum of the Ariston machine and the rubber should also be dried with a rag.
After finishing work, disconnect the device from the network and close the water supply tap. This will eliminate wiring problems that arise during electrical failures.
Also, after carrying out all the cleaning procedures, open the powder containers slightly to allow the washing machine to ventilate.
Check the drain filter from time to time.
The Ariston machine needs periodic cleaning to remove plaque, small dirt and solid particles. Once every month or two, run a dry wash with a small amount of descaler in the dispenser. In this case, the water heating rate should be maximum - it is written in the instructions.

Operating modes of the Ariston washing machine

Ariston washing machines have many models that differ not only in design, but also in functionality. Each of the existing washing modes allows you to select special conditions that effectively clean the product without harming it. According to the instructions, the basic washing programs are:

Cotton – designed to work with thick items made from cotton. It features high heating temperatures and a high number of spin speeds. Effectively copes with both minor dirt and long-standing stains. Includes standard and intensive modes.
Synthetics - uses low heating temperatures, and the spin rate is slightly reduced due to the ability of synthetic fabrics to quickly lose color and become deformed.
Mix 30 / Mix 15 / Quick Wash 60 / Quick Wash 30 – designed to freshen things up, but does not remove serious stains. It is characterized by low water temperature and high RPM. Cleaning time takes 30, 15 and 60 minutes respectively.

Manufacturers of Ariston washing machines took care of their consumers and, in addition to the basic ones, included many special modes in the device. Their characteristics are indicated in more detail in the instructions supplied with the washing machine. Let's look at their features and the main differences between each other:

Antibacterial cycle - goes through two rinsing stages, has a high spin speed and effectively fights detergent residues, germs and mites.
Night – the program is aimed at virtually silent operation and consumption of a minimum amount of water and electricity. To drain and spin, you must press the “Start” button again.
Children's clothes - as in the case of the antibacterial program, it involves the use of more water and directs the action to actively rinse the remaining powder from the material.
Silk – intended for delicate, thin and delicate items. A small heating rate is used and does not involve spinning.
Wool – used for cashmere and wool items that require special conditions. The water heats up slightly, the drum rotates slowly, and the spin cycle is no more than 600 revolutions.

According to the instructions, you can additionally set the Ariston to rinse, normal and delicate spin, and drain. They will contribute to more thorough cleaning, leaching of detergent or obtaining almost dry clothes at the end.