Using even the most reliable washing machine does not guarantee complete absence of malfunctions throughout the entire period of operation. One of the most common problems is when the washing machine stops spinning clothes. It most often manifests itself as unstable rotations of the drum or a complete refusal to reach the appropriate speed. The optimal solution would be to familiarize yourself in advance with the main causes of this problem, as well as methods for solving the problem for popular models of washing machines.
Reasons why the washing machine does not spin
It is not so easy to determine why a washing machine does not spin clothes without special knowledge. However, a careful study of the specifics of device operation and error indication features will help you quickly identify a possible breakdown.
Clogged filter, pipe or hose
A clogged hose or pipe is especially common for Samsung or Candy devices. The main sign of a malfunction can be considered the absence of drainage, accompanied by the appearance of a corresponding error on the indicator.
Wrong program selection
Not all washing modes include a spin cycle. It is important to take this into account at the stage of setting up device parameters. Also, the user can sometimes stop the washing process before spinning begins. Accordingly, to start the procedure, you will need to enable it separately.
Overload of laundry
Placing too much laundry in the drum may make it difficult to rotate. As a result, the motor power is simply not enough to reach the required speed and perform efficient spinning.
Pump or pump failure
In Bosch, Ardo and Ariston washing machines, the pump often fails. It is he who is responsible for draining the water after rinsing. And without draining the water, starting the spin cycle is impossible according to the parameters preset in the system.
Tachometer malfunction
The tachometer controls the number of drum revolutions. It usually fails due to frequent overloads or voltage surges. Without it, the system will not be able to determine the drum rotation speed and use the spin mode.
Electric motor failure
Such a malfunction is expressed by a loss of engine power, a burning smell and the presence of extraneous noise. The error can only be corrected by completely disassembling the machine body and replacing the brushes with new ones.
Broken pressure switch
A malfunction of the pressure switch is accompanied by problems with diagnosing the system, as well as difficulties with water intake. The water level may be too low or, conversely, too high. As a result, the machine will either overheat or the laundry will not be completely wrung out.
Heating element malfunction
A malfunctioning heater often prevents the spin cycle from working properly. Reasons: chafing of the wiring or the formation of a large amount of scale on the main elements of the board.
Problems with the electronic module
All functions of the washing machine are controlled by an electronic module. Its malfunction gives rise to many problems not only with the spin cycle, but also with other modes of operation of the device.
Belt drive failure
The drum belt drive most often fails on LG devices. Usually the cause of such a breakdown is overload or improper balancing of things in the drum.
Drum balancing
Drum imbalance is an extremely dangerous phenomenon that negatively affects all components of the washing machine. It is recommended to arrange things in a special way directly when placing them inside the drum.
The hatch lock is broken
A broken door lock may prevent the required program from running. The system will think that the hatch is open and simply will not start washing. The solution to this problem is to completely replace the lock.
User inattention
Enable Options
The most common reason why a Samsung washing machine does not spin is that the options are not turned on correctly. Each washing mode includes a number of mandatory and additional actions.
And not every mode involves spinning clothes. Users often do not know what parameters a particular program has. Having chosen, for example, a delicate wash, you should not expect the laundry to be damp. The delicate program does not involve squeezing out excess water from items, as this can lead to damage to the product.
Sometimes the user accidentally presses the “No spin” button when starting up the Samsung washing unit. This means that the machine will wash the clothes, rinse them, drain the water and turn off. Of course, at the end of the cycle, the laundry will remain wet. To correct the situation, you should turn off and turn on the device again, selecting the required operating program.
DIY repair
Washing machines from different manufacturers have specific features, which in turn determine the spin recovery process. Let's look at the devices of the most popular brands and what to do in case of malfunction.
LG
An LG washing machine does not spin after washing, most often due to a malfunction of the tachometer, which is also often called a Hall sensor. To test this hypothesis, it is necessary to gain access to the sensor immediately after disassembling the machine.
You need to ring all available contacts using a multimeter and check the resistance in the circuit. If at least one of the contacts does not work, this may indicate a malfunction of the resistors installed on the board. Next, specific resistor pairs are checked. On a burnt element, the multimeter will not show any resistance.
To repair an LGI machine, you simply need to resolder the faulty resistors or purchase a new tachometer for a specific model of washing machine.
Indesit
The appearance of error F08 usually accompanies a situation in which the spin cycle in the Indesit washing machine does not work. It indicates problems with the operation of the heating element switching relay or a malfunction of the pressure switch. To repair, you need to check the corresponding contacts on the board. It may be necessary to replace the control board or the pressure switch itself.
Most often, the main reason is a breakdown of the heating element on the body of the washing machine. This is checked using a multimeter set to maximum resistance measurement mode. Even small values indicate a breakdown.
It is necessary to completely replace the heating element. The old component is unscrewed and a new one is attached in its place. It is advisable to purchase a device from a reliable manufacturer so as not to encounter unpleasant consequences.
Samsung
Failure of the spin mode on Samsung washing machines may be due to a worn-out drive belt, a faulty tachometer, a malfunction in the control unit, a broken pressure switch, or even a damaged electric motor.
The most harmless malfunction can be called a situation in which a rotating element appears on the electric motor shaft. In this case, the problem will be due to the fact that the tachometer attached to this element simply cannot correctly read the revolutions and transmit information to the control unit. As a result, it is impossible to regulate the spin speed in automatic mode, and the machine’s operation timer stops at 10 minutes. To correct the problem, sometimes it is enough to simply select a washer, with which you can ensure a reliable connection of all elements on the motor shaft. The machine will stop humming during operation and will begin to wring things out correctly.
Bosch
With Bosch machines, a problem that often arises is that the spin cycle does not work correctly. The machine, in spin mode, tries to accelerate the drum, but does not pick up speed and freezes. The weak point in this case seems to be the engine, so it is recommended to start repairs from there.
The motor may burn out completely, requiring the purchase of a new motor. However, its cost and difficulty of acquisition negate all the advantages of such a solution. It is often better to purchase a new washing machine.
The most common cause is a slipped magnet on the motor shaft. The repair will include disassembling the Bosch machine, separating the engine and opening the corresponding connector. The slipped magnet will need to be pulled out, thoroughly cleaned and returned to its proper place. To prevent the problem from recurring, it is advisable to securely secure the magnet using silicone sealant.
Candy
Owners of Candy washing machines may also encounter the unpleasant problem of no spin during washing. In this case, it is advisable to immediately carefully study the indicators on the external panel. If at the moment of the first jerk they first blink and then begin to fade out slowly, then the fault lies in the capacitor installed inside.
This capacitor is located on the main board of the Kandy washing machine. It is enough to simply replace it with a similar one and the machine should start spinning in normal mode without any difficulties.
Ardo
On Ardo models, difficulties with switching to spin mode are most often associated with engine or pump malfunctions. However, any problems with the engine affect the operation of the machine as a whole. Therefore, it is advisable to assume that the pump does not squeeze well precisely because of the pump.
Sometimes the pump stops working properly due to a foreign object or excessive debris getting inside. When disassembling fireplaces, you must immediately separate the pipe and drain pump from the pump, thoroughly wash the part and inspect it for damage.
If the solution does not help, you can then pay attention to the sensors used and the main control unit. Inspection and repair of these components are carried out in accordance with the basic rules for working with electrical circuits.
Zanussi
It is advisable to start repairing a Zanussi washing machine with the simplest unit: the filter. It is necessary to gain access to it and thoroughly clean it of excess dirt. If necessary, the filter is replaced with a new one.
Then you need to disassemble the machine and disconnect the pipe. All elements are checked for debris and mechanical damage. If no external problems are observed, you should start checking the electronics. The motor and control board are checked using a multimeter. If the values at any nodes differ significantly from the nominal values, the problem will be in them.
Traditionally, the tachometer and pressure switch deserve special consideration. Models of this brand are usually equipped with inexpensive components that may well fail. If a problem is detected, these components will need to be replaced immediately.
Ariston
When using Ariston automatic washing machines, users may encounter error F05. It is accompanied by the inability to start the spin cycle, as well as the lack of automatic drainage of water. The machine itself works extremely unstable and at one point simply stops the washing process.
The repair must begin by disconnecting the device from the network and draining the water in the tank.
Further repairs involve opening and cleaning the channel with the filter. Often, it is foreign objects in this area that cause the drain to jam, as well as the impossibility of spinning.
The pipe in modern Ariston models is reliable and almost never fails. The problem may lie in the control unit or the motor itself. For a more accurate determination, you need to ring the main contacts and replace faulty components.
Beko
Beko washing machines are reliable and unpretentious. However, even they can fail in some cases. The lack of spin in such devices is rare in itself. Most often, the problem occurs simultaneously with the fact that the machine does not drain the water. This could be due to faulty components or simple clogging of the internal parts.
In particular, a foreign object that gets into the pump blades immediately negatively affects the operation of the entire device and leads to the machine not squeezing. To carry out repairs, you need to disassemble the machine and gain access to the internal parts. Then all elements are checked for blockages or mechanical damage. If none are found, you should immediately check the serviceability of the electronic circuits using a multimeter.
How to find a fault?
What to do if the washing machine does not drain water? It is necessary to look for the cause gradually, checking possible options. This is exactly how specialists work; in addition, they rely on their own experience in repairing washing machines.
Before starting diagnostics you need to:
- Turn off power.
- Close the water supply tap.
- Drain the existing liquid and remove the laundry.
Prevention
In order for the washing machine to function for a long time without any problems, it is advisable to follow the operating rules for such equipment. To avoid problems with spinning, it is necessary to periodically check the filter, do not wash items with any mechanical inclusions in the pockets, maintain balancing, and also monitor the condition of the electrical circuits of the device.
Not spinning your washing machine can be a really annoying problem. However, correct identification of the cause will ensure prompt repair of the equipment yourself without turning to specialists.
How to fix the problem?
Some malfunctions can be corrected yourself; the procedure was described in our article. But often owners cannot cope with the problem without involving a specialist. It is necessary to invite a specialist to carry out diagnostics and repairs.
It is recommended to contact authorized service centers for several reasons:
- Such service centers employ proven and qualified professionals.
- They use advanced equipment for diagnosis and repair.
- It is easier for an authorized service center to obtain the necessary spare parts to replace broken parts.
You can find a list of companies that have received approval to repair Samsung equipment on the manufacturer’s website.
The operation of the heating element is disrupted
The spin will not work if the reason is a malfunction of the heating element. How is heating element related to this problem?
All functions of technology are interconnected. The washing machine does not spin due to the failure of the heating element.
When the heating element breaks, burns, becomes coated with scale or cracks, a signal is sent to the electronic unit, which turns off all enabled modes.
It is not necessary to open the machine and check why it stopped spinning. The washing machine has a diagnostic indicator and then informs the owner about the problem by showing a specific code.
In case of problems with the heating element, the codes will be as follows:
- Ariston, Indesit - F03;
- Atlant - F2;
- SAMSUNG - E5, E6;
- Candy - E05;
- LG - HE.
You can also unscrew the back panel of the CM and check the integrity of the heating device.
Blockage in pipe or drain
The pipe that connects to the pump sometimes becomes clogged. This may also be the reason why your Samsung washing machine does not spin clothes after finishing washing.
After cleaning and washing the part, the problem will be solved.
When performing this work, you need to carefully inspect the part. If damage is detected, additional investment will be required. After purchasing and installing a new part, the machine will again properly wring out and drain the water.
