The drum is loaded, the desired washing program is selected, but for some reason, after pressing the “Start” button, the washing machine does not start the working cycle, but signals with the “Door” error.
Information about what can provoke such a situation and how to correct it will allow you to return the Atlant washing machine to working order as quickly as possible.
What does the Door error mean in the Atlant washing machine and what to do to eliminate it, we will tell you further.
What does the code that the washing machine produces mean?
Just by the name of the error “Door” (translated from English as a door), it is clear that the malfunction of the washing machine is associated with the loading hatch door.
As soon as the control module receives a signal that the door is not locked, it blocks the work process, signaling the problem with the “door” error (displayed on the control panel display).
If the Atlant washing machine is not equipped with an information board, the blinking indicators 1,3,4 will indicate that the doors are not locked .
Indesit
You can often hear complaints about models from this company that they often break down. We will not argue about the quality of the product, but will deal with the door error code - as the most common problem.
The peculiarity is that the lock located inside the door is thought out rather poorly. The axis holding the hook with the spring pops out from time to time. As a result, the hook cannot lock the hatch in the “closed” position. If this happens, don’t get angry and kick the door. Just follow a few simple steps:
- disconnect the machine from the electrical network,
- remove the water in the washing machine using a garbage filter,
- unscrew the fasteners, remove the door,
- unscrew the screws holding the parts of the hatch together,
- insert the axle into the place intended for it,
- We perform assembly in reverse order.
If everything is fine with the mechanism, but the hatch does not close, you should check the hatch control unit, module, etc.
[custom_ads_shortcode1]
Why does it appear and what should I do?
There are many reasons why a washing machine gives a “door” error.
Improper use of a household appliance
Diagnostics begins with the simplest thing - checking how tightly the hatch door is closed.
To do this, gently press it until the characteristic UBL locking click appears . If the error does not disappear, the door must be opened and the rubber seal carefully inspected.
Perhaps a foreign object (sock, underwear, etc.) has gotten into the cuff and is preventing the hatch from closing, or the rubber seal has become deformed or stretched (a displaced cuff prevents the hatch from closing completely).
Additionally, check the cleanliness of the area for the lock tongue. If necessary, using a thin brush, clean out the debris that has accumulated there, due to which the hatch door cannot close.
Mechanical damage to door hardware
The side loops are checked first . Due to improper installation of the washing machine, the hinges begin to sag, which is why the door latch does not fit into the lock hole. To fix the problem, you need to check the level of the washing machine body, tighten the hinges, and adjust the position of the hatch door.
The second element that is worth paying attention to is the locking tongue. During operation of a household appliance, a situation may arise in which the retaining pin falls out. As a result, the tongue changes its position and does not fit into the lock hole, making the door unable to close tightly.
To return the retaining pin to its place, the hatch door will have to be disassembled:
- unscrew the two fasteners and remove the door from the body;
- Unscrew the fasteners connecting the two halves of the door;
- Carefully release the latches and remove the outer part of the door (the one with the glass);
- using a flat-head screwdriver, push the pin into its original place;
- Assemble the hatch doors in the reverse order and secure them to the body of the washing machine.
If the hatch door closes without much difficulty, but the characteristic locking click is not heard when the door is closed, then most likely the special plastic guide has worn out.
Replacing it is not difficult: just disassemble the hatch doors (the procedure was described earlier) and replace the worn element with a new guide of similar size .
UBL is out of order
The Atlant washing machine is equipped with an electronic device that blocks the hatch door (UBL). When the washing program starts, the control module sends a signal to the plates of the device.
As they expand, they press on the lever that blocks the loading hatch door . Natural wear of the plates, damage to the contacts as a result of a short circuit or mechanical damage renders the UBL unusable, which is indicated by the Atlant washing machine with the “door” error.
A multimeter will help confirm assumptions that the blocker is broken (the device must first be dismantled).
In order to remove the UBL from the washing machine body, you must:
carefully bend the edges of the rubber seal of the hatch, pry it up with a thin screwdriver, and remove the metal clamp;- insert the rubber seal inside the drum;
- Unscrew the fasteners holding the UBL (located on the right side of the loading hatch);
- disconnect the wiring fasteners. Remove the lock from the washing machine body.
Photographing the location of the wiring on the UBL will simplify the process of connecting a new blocking device.
The lock is removed, you can begin the testing procedure:
- set the multimeter to “Resistance” mode;
- apply probes to the phase and zero contact.
The readings on the display have changed - the blocker is working; if not, the UBL must be replaced.
Installing a new hatch door lock is easy . The main thing is to choose the right UBL in accordance with the model of the washing machine (information is indicated on the plate attached to the rear panel of the case).
Based on the photo, connect the wiring of the new lock, fix the UBL into the washing machine body, and return the metal clamp of the rubber cuff to its original place.
Malfunctions of the control unit
You can independently determine that the possible cause of the “door” error lies in the control unit only visually.
To get to the module you need to:
- remove the powder receptacle;
- remove the cover;
- Unscrew the fasteners holding the control panel;
- carefully inspect the electronic board (do not touch the wiring). You should be wary of: condensation (humidity is the first cause of a short circuit), dark spots (traces of exposure to high temperatures), bloated barrels and damaged electrical circuit tracks.
Burnt-out resistors, triacs and microcircuit tracks block the normal operation of the Atlant washing machine. Repairing the control unit yourself is only possible if you have knowledge and experience in such work.
Otherwise, it is better to entrust the restoration (or replacement) of the control unit to the professionals of the service center.
Repairing the control board - in the video:
Typical breakdowns
In most cases, the door error is associated with a malfunction of the hatch locking device or control module. Here are all the breakdowns that we fixed with this error.
Hatch blocking device (UBL) - from 1200 rubles*
Used to lock the door during washing. If the UBL fails, the door is not blocked, so the machine does not even start drawing water and writes door on the screen. Failure is usually due to the fact that the UBL thermal tablet burns, melts or breaks, which bends the bimetallic plate and the hatch is blocked. Occasionally, the bimetallic plate itself loses flexibility and reacts poorly to heating the tablet.
UBL is not repaired, it is completely replaced.
Control unit - from 1800 rubles*
With this error, elements in the UBL circuit on the board fail: resistors burn out, triacs break through, and microcircuit tracks burn out. Due to the fact that the door does not lock, the washing machine does not start washing.
The technician diagnoses the board, identifies what is burned out, replaces the faulty elements with new ones and solders the tracks. In cases of severe burnout of the board, it is completely replaced with a new one.
From the practice of masters! Often the cause of module failure is a faulty UBL. Therefore, before repairing the board, it is necessary to carefully check the locking device and, if necessary, replace it.
Wiring or connections in the UBL circuit - from 1400 rubles*
It is necessary to check all connectors and wires from the lock to the control unit. Perhaps there was a break somewhere, so the UBL does not respond to commands from the control module and the Atlant washing machine gives a door error. It happens that the wiring frays due to constant vibrations, the contacts oxidize or burn out.
The wizard identifies where the signal break occurred and:
- twists the wires or completely changes the cable;
- processes and solders contacts or completely changes the contact group.
*Prices do not include parts. If spare parts are needed for repairs, they are paid additionally.
You were unable to resolve the door error on your Atlant washing machine? Call a professional from Wash Man. We'll come today, tomorrow, or whenever you say. We will find out the cause of the error and, if necessary, and with your consent, we will carry out repairs at home. After repair, we will check the operation of the machine and issue a warranty card for up to 2 years. Call!
We wish your equipment health!
Source
Call the master
A professional technician can fix the “door” error in an Atlant washing machine as quickly as possible. You can find the phone number of the right specialist through your family and friends (“word of mouth” is a reliable way to avoid meeting scammers). Alternatively, the specialist’s contacts can be found through Internet search engines (when choosing a specialist, it is important to pay attention to the number of positive reviews).
When submitting an application, you must: provide the exact model of the washing machine, the year of manufacture of the household appliance, and describe the problem in as much detail as possible.
You can find out the preliminary cost of repairs by phone. The technician will be able to announce the exact amount to be paid only after the diagnosis has been carried out. Demands for full payment for repairs that have not yet been carried out are a reason to refuse.
Depending on what exactly triggered the “door” error in the Atlant washing machine, the cost of repairs carried out by a service center technician varies from 800 rubles. up to 2100 rub. The urgency of repairs and the cost of parts to be replaced increase the cost of repair work.
Ariston
It should be noted here that actions with Atlant and Indesit are also relevant for this brand. But they still have their own characteristics. In an Ariston machine, this signal has nothing to do with the door lock. A similar error can occur from poor contacts on the motor brushes.
In this case, you should get to the motor, unscrew its fastenings, and disconnect the wiring connector. Having removed the motor, we check the integrity of the brushes and inspect the wires that power them. It is possible that the brushes are worn out from prolonged use and need to be replaced.
[custom_ads_shortcode3]
How to prevent it in the future?
Several recommendations will help you avoid problems with closing the hatch door of the Atlant washing machine
When loading the drum, it is important to monitor the amount of dirty laundry. Overload accelerates wear of the internal elements of the washing machine (including hinges and door lock), and can lead to deformation of the rubber cuff.- Do not place heavy objects on the washing machine (constant pressure deforms the walls of the housing).
- Do not hang wet, heavy laundry on the hatch door (excessive pressure causes the hinges to sag).
Careful use of the washing machine in accordance with the manufacturer’s recommendations helps prevent the occurrence of the “door” error and maximize the period of uninterrupted operation of the household appliance.
Adviсe
An emergency way to restore the functionality of the Atlant washing machine is to reboot. It is enough to turn off the washing machine from the network for ten to fifteen minutes, and then restart the working cycle.
If problems with closing the door were caused by a failure in the system, the “Door” error will disappear; if not, it is necessary to carry out a more detailed diagnosis of the problem that has arisen.
Often the lack of locking of the hatch door is associated with low voltage in the network. Connecting the washing machine through a special device - a voltage stabilizer - will help eliminate the problem of intermittent voltage in the network (and along with it the “door” error).
Samsung
On washing machines from this company, not only this error signals problematic issues with the door. Signals de, Ed, de 1, de 2 may appear. Problems are associated with the following features:
- the hatch is not blocked from the very beginning,
- the door does not open after finishing the wash,
- First the blocking works, then it disappears. The machine “freezes” and produces a corresponding signal,
- the door tongue did not hit the lock,
- The signal may appear and disappear many times during the wash cycle, from five to seven times.
What should be done in such cases? Let's look at the simplest option, when the hatch closed and a click was heard, but the machine signaled a problem. In this case, it is necessary to check and, if necessary, repair the blocking device.
And if the door does not open after the washing process, the problem should also be looked for in this place. But first it is recommended to wait ten minutes. The lock may open automatically.
The error may also be due to mechanical problems. If the hook simply does not get into the lock, you should make sure that the hinges holding the hatch are properly fastened. They become loose quite often and need to be completely replaced.
By the way, it is best to install a new “reinforced” analogue made of a special alloy. We guarantee that such problems will not happen again.
It’s bad if the signal appears and disappears on its own. The problem will have to be found in the contact group or wiring, and this is a task for an experienced technician.
[custom_ads_shortcode1]
