Instructions and manual for Samsung S803J in Russian

Washing machine user instructions...

Washing machine user instructions

• Image
• Text
• Content

User instructions

washing machine

81021

8821

8621

Safety precautions………………………………………………………2

Installation of the washing machine……………………………………………………….3

Unpacking the washing machine…………………………………………….. 3

General view of the washing machine……………………………………………………………3

Choosing a place to install the machine……………………….3

Adjusting the height of the legs……………………………………………………….. 3

Removing the transport bolts………………………………………………………4

Connecting the water supply hose…………………………………..4

Placement of the drain hose……………………………………………………4

Loading and washing laundry…………………………………………….. 5

General view of the control panel……………………………………………………………. 5

First wash of clothes………………………………………………………………………………… 6

Setting the washing mode manually……………………………………………. 6

Loading fabric softener into the washing machine……………………6

Washing tips………………………………………………………………………………… 7

Caring for your washing machine……………………………………………………………. 8

Restoring functionality of frozen

washing machine…………………………………………………………………………………..8

Cleaning the external surfaces of the washing machine…………………..8

Cleaning the debris filter………………………………………………………8

Cleaning the mesh filter of the water supply hose……………………8

Troubleshooting……………………………………………………….9

Problems and their elimination………………………………………………………..9

Explanation of error messages………………………………………..9

Washing program table……………………………………………10

Applications………………………………………………………………………………11

Description of symbols on clothing labels………………………………….11

Electrical Warnings

safety………………………………………………………………………………………..11

Environment protection……………………………………………………. eleven

Statement of Compliance……………………………………………………11

Technical specifications…………………………………………………… 12

COPE N0: RS68-00872D-04

• Washing machine user instructions Before using the washing machine
• Safety Instructions • SAVE THESE INSTRUCTIONS

Main characteristics of Samsung Sensor Compact S803J

Pros and cons of Samsung S1005J

The spin is excellent and the clothes are washed. Never glitched. Compactness. When the door in the bathroom is closed, you can hardly hear it, only the beeping at the end of the wash.

Narrow, compact. It washes clothes perfectly without powder residue and wrings out perfectly. Convenient controls, a display indicating the remaining wash time, and the ability to run only a spin cycle without rinsing.

There is no anti-twisting mode. And jump - jumps when it enters spin mode. Sometimes it gives code E4 - the laundry is crowded

Sometimes it bounces around a lot when spinning at maximum speed, and runs a little across the tiles (sometimes). When there is a lot of laundry, such as sheets or a sweater, it may display an “E4” error, which means that you need to straighten the laundry for stability when drying and start the spin cycle again.

Tips for use

In order for your household appliance to last a long time and not require repairs, it is important to follow all the operating rules specified in the Samsung instructions.

General recommendations will also help in this matter:

• 
  The optimal number of things should be loaded into the drum - underloading and overloading negatively affects the operation of the machine;

• if there is no need to set a high temperature, in order to save energy, you should limit yourself to 30 degrees;
• the maximum temperature (90 degrees) creates a load on the heating element and control module, so washing at this level should not be frequent;
• You should not constantly set the spin cycle at high speeds (over 800), as this wears out the oil seal and bearings;
• when choosing a detergent, you should give preference to quality products;
• You cannot use powders intended for hand washing;
• While the machine is running, it is not recommended to forcefully stop it;
• In the event of a power outage, the device will automatically restore the process.

You will find all the most important and useful information about Samsung washing machines in this section of the site.

Operation and repair of Samsung SMA

_____________________________________________________________________________________

• Repair recommendations
• Error and fault codes
• Repair of models S-852, S1005J, 851, 601, 831
• Repair of models 861, S832, 862
• Repair of models WF 8590, 6450, 6520 and others
• Repair of models S803J, 843, 1061, 1062
• Repair of models S821, F813J, S1021

Model F1015J Samsung F1015J sensor compact washing machine installed. In the “synthetic fabric” mode, it pours water, washes, tops up, washes, etc., at the 10th minute it tries to do something and displays 6E. There is no such code in the instructions! In the "quick wash" mode, everything is fine, what does this mean? Error E6 - problems with water heating. Feel free to change the heating element, there is a high probability that it has burned out. The essence of my problem is this: a hum appeared during the spin cycle; and if you turn off the already “empty” machine and manually turn the drum, then there is a “rattling” sound. I suspect that the reason lies in the bearing, I am going to change it myself. The questions are as follows: 1. Is it necessary to remove the entire drum to replace the bearing, or will it be enough to just remove the crosspiece, as in the general example for the Gorenje apparatus? 2. Please tell me the exact number of the original oil seal for my model and the number of the SKF bearing or another equivalent of no less quality. Samsung and Gorenje have little in common. In your case, you need to disassemble it, starting from the top cover and the front wall, then pull out the tank and then everything will be visible. Oil seal 25*50.55*10/12. Samsung f1015j washing machine malfunction. When starting any program, it writes DOOR and beeps 5 times. There are 4 contacts on the locking device. 2 of them have a resistance of 180 ohms, i.e. the electromagnet winding and the other two power limit switches are triggered when locked; the wiring and contacts are in order. Replacing the thyristor did not help. What do you advise? Run a tester along the blocker control circuit. The Samsung F1015J Sensor Compact automatic washing machine is in operation. From time to time, when the drum starts to rotate, it starts to growl and the drum tries to spin, but cannot. The belt is intact; when the hatch is open, the drum rotates freely without interference. SMA can stretch completely normally, she can growl once, or she can growl the whole wash (probably depends on her mood). This does not particularly depend on the amount of laundry being washed. It appears both during washing and during spinning (in any mode). This has been happening for about 4 months now. Check the brushes, clean the rotor, carefully inspect the belt. Samsung F1015J machine front loading 4.5 kg, does not drain or spin after washing. But after turning it off/on, turning on this mode separately, that is, draining and spinning, works fine. What’s alarming is that in order to finish washing you need to turn off the washing machine, then turn it on and put it on drain, and then on the spin cycle, that’s the only way it washes. If the heating element works, change the pump, of course, you can look at the thyristor on the module that controls the pump, but I think 90 percent is the pump. Samsung F1015J washing machine malfunction - the pump burned out. The triac on the module that controls the pump has failed (burnt out). I looked through the entire module - all the tracks are intact. The 620 ohm resistor, which is open in the triac control circuit. The rest of the resistors are normal. R48 (which is broken) goes to KID 65003AP. What is the functional purpose of this microcircuit? It controls triacs. There are two of these ICs on the module. Do I need to change the KID 65003AP IC (which controls the pump)? Or it is enough to restore the triac circuits. Everything works on the SM except for draining the water. Could the port on the controller (microprocessor?) burn out? If a port on a microprocessor burns out, is it possible to further repair the module or just buy a new unit? Pump motor control circuit: - microcontroller port P 52; -IC KID 65003AP, 16-pin triac control; -triac cascade: two resistors, two capacitors, the M2Z47 triac itself. What is advisable to change? The triac itself, resistors, IC KID 65003AP. Do you need to change capacitors? They have an operating voltage of 650 V. 10 n J is written on them. This is what the nominal value is - 10 nanofarads. How to check the functionality of a microcontroller port? Change the triac and check the unit. Samsung F1015j Sensor Compact washing machine installed. During the rinse mode it stops, the water does not drain, only a hum is heard. More details: When washing, water is poured in and drained, it reaches the middle of the rinse cycle, sometimes until the end of the rinse cycle, and then it stops and hums (the water does not drain). Once the stop occurred 20 minutes before the end of the wash, today at 5 minutes, sometimes the wash proceeds normally with spinning and rinsing, the debris filter is clean, the pipes to the pump are not clogged. In work for 6 years. What could be the reason? The drain pump needs to be replaced. Spin problem. It takes a long time to press 8 to go to 7 and back, sometimes error 4E appears. This is a disease of these models; you need to arrange your laundry correctly and not wash one item at a time. The 1270J5 belt may be worn or stretched, as well as the motor brushes and the triac on the module. The Samsung F1015J washing machine is in operation with a load of 4.5 kg. She is 6 years old. First, a leak appeared (on the side), small when taking in water and during washing, apparently when changing the water. After the hose broke off in the front (probably the drain / on the left behind the front panel), they called a technician, he put on the hose, tested the washer, said the drum, the engine is normal and will last for a long time, closed everything and left, the next day it started leaking a little on the left again (this he didn't even look). Yesterday the hose in the front tore off again (apparently from vibration), today I removed the front panel and put the hose on myself, but the only problem remained: when you add water, there is a small leak (when you turn it on, add water, and turn it off, you can hear water dripping on the bottom, where is it? take a look at troubleshooting this problem, preferably in more detail). Remove the top cover and see where the leak is. And often the joint leaks at the junction of the hose leading from the detergent hopper to the tank (behind the front wall, under the hopper), then you need to either change the hose for a new one or put it on an adhesive-sealant. Tell me if there is any point in a water softening filter? In our city the water is hard, and this seems to be the worst thing for washing machines. No, it is very harmful for the machine. As part of the filter, hexametaphosphate-one destroys the fill valve, settles on the heating element and will remain on the laundry during rinsing. In fact, this is a component of Calgon, which our citizens actively pour into washing machines, hastening their breakdown. Damage to the Samsung F1015J washing machine. The “coils” on the drain pump burned out. After installing a new pump (exactly the same one), the following things began to happen: when you press the “power” button, simultaneously with the lights on the panel lighting up (like “ready for work”), the hatch cover opens and when you try to close it, the lock “cracks.” What could this be and how can I fix it? Check the locking of the hatch, its power supply circuit, the triac on the module for the pump. If the car was turned over to replace the pump, water could get into the UBL. We connected a Samsung Sensor compact 1015j washing machine with a load of 4.5 kg. Recently after washing it started to smell terribly, I quickly turned it off. The next day I tried to turn it on and wash it. Halfway through the wash she suddenly stopped and that was it. Instead of turning the drum, it just starts humming slowly, hums, stops, then immediately starts humming again. It doesn’t drain the water - it hums, again, it doesn’t squeeze out - it hums. The second day there is no water, it won’t let me open the door. Here's the question: 1. How to open it? 2. How serious is the damage? Unplug and wait five minutes. Lower the drain hose into a low basin and drain the main amount of water, remove the bottom bar and in the lower right corner you will see a yellow ring, pull it, the door should open. After this, you need to unscrew the filter cap, drain the remaining water and clean the filter. The SMA erases for about 15 minutes, then it stops and buzzes, it doesn’t write any errors, you have to drain the water manually, please tell me how to fix it. See filter. It should be written in the instructions. And check the drain pump. Model 1043 I am repairing a Samsung R1043 automatic washing machine with a load of 5 kg, in operation for 2 years. All functions are normal: washing, water heating, draining, everything works well. And the spin after washing and just a pure spin - no, it turns on, tries to pick up speed, in one direction it accelerates to 300-400, in the other it can barely reach 100, the time on the display is 8-7-6 minutes and back 6- 7 or 6-8 and so on in a circle. Please tell me if anyone has encountered what this is? Software failure or something else? Is it possible to reprogram it yourself at home? The problem when laying out the laundry (can’t lay it out or thinks so) is why it doesn’t go into the spin cycle. Check at idle, and also pay attention to the bearings and belt (for starters). If the drain hose and filter are not clogged, the drain pump is working properly, and there are no network failures, then you have reached the control module. Samsung washing machine R1043 installed. After about 2 years of operation, during the next wash it began to make unpleasant periodic sounds, the drum was spinning. What could it be? The sound is difficult to describe, something grinding. I found a dangling pump impeller in the drain pump, pulled it out, started the spin cycle, and the noise disappeared. In this regard, questions arose: should the pump be replaced, or just the impeller? The pump will definitely need to be replaced with a new one. We connected the Samsung P1043 washing machine (front loading 5 kg), the error ue is displayed. Error code ue is Imbalance. Redistribute the laundry, set the SMA level. The problem is this: SMA S1043 (3.5 kg load) was washing, then stood up, drained the water, displayed the error code NOT on the display and turned off. After disconnecting from the network and then turning on, it does not turn on at all. We checked the heating element and temperature sensor - everything is normal, power is supplied to the board. What could be the problem? The washing machine is 4 years old. The module will probably need to be repaired. There is such a problem with the F1043 washing machine (4.5 kg load). Doesn't want to drain water properly. First the impeller flew off and was put in place using epoxy glue. After installing the pump in place, the following problem was discovered with draining the water: the pump works, the impeller rotates, but the water does not drain. But there is also a moment when you blow hard into the drain hose at the moment when it should drain water, but the water does not drain, then it begins to drain. Well, at the next moment of draining, this procedure must be stopped. I checked the drain hoses for clogging, everything is clean, both the one up to the pump and the one from the pump. Tell me what can be done or what is the problem? Change the drain pump, the sooner the better, before the thyristor in the module is burned out. It seems to me that even a small amount can be washed well in a large drum due to the fact that it is not lumpy, but will flop around freely and, if necessary, it is possible to wash a large item such as a blanket or down jacket? By the way, I wanted to ask, can I give it to the machine at idle speed as a preventive measure? So that it does not get absorbed into the laundry. For prevention, just citric acid - 100 g at 60C synthetics and let the program work. If you boil frequently, stalactites have probably already grown on the heater. 2-3 times a year is enough. Regarding any chemicals, disinfection with percarbonate does not impair health in any way; it is the main component of oxygen-containing products. Yes, and environmental friendliness is appropriate if you wash exclusively with Ecover or Almavin - these are expensive powders. And if Persil, then a good part of him will never be washed out of the laundry. Dust mites and all that stuff can be removed perfectly at 60C. In general, there are Japanese washing powders with silver - disinfection is already at 30C. A Samsung with a large drum, like any other brand, will wash better than a machine with a small drum; naturally, the laundry wrinkles less and rinses better. Small cars are much worse in terms of durability. And don’t wash large things. My Samsung F 1043 machine has a drum jam. First, an extraneous knock appeared when scrolling, then, without the help of an additional push by hand on the flywheel, the drum completely stopped spinning. I read the information and came to the conclusion: the bearing has failed, the bearing with the seal becomes unusable after 3-4 years of operation. What type and marking of the bearing and oil seal are installed on this type of washing machine? I want to try to carry out repairs on my own. In your case, it would be ideal to disassemble the SMA. And see for yourself what the bearings and seal cost. Usually on Samsung there are 6204, 6203 and an oil seal 25x50.55x10. Although the belt may be worn out - you need to check it.

wf7450sav wf7452s9r wf7520s8c wf7520s9c wf7520sav wf7522s8c wf7522s8r wf7522s9r wf7600sav wf7602s8c wf80f5e2w4w wf8500nhw wf8500nmw8 wf8500n mw9 wf8590nfw wf8590nlw8 wf8590nlw8dylp wf8590nlw9 wf8590nlw9dylp wf8590nms wf8590nmw8 wf8590nmw9 wf8592ffc wf8598nmw wf8598nmw9 ww12k8412ox ww 60h2210ew ww60j3083lw ww60j3090jw ww60j3097jwdlp ww60j4090nw ww60j4260hw ww60j4260hwdlp ww60k42106wdua ww65k42e00s ww65k42e00w ww65k42e08 w ww65k42e09w ww65k52e69s ww65k52e69w ww6ej30934sdlp ww6ej42604wdlp ww6mj30632w ww6mj42602w ww70j4210jw ww70j4210jwdlp ww7ej42104wdlp ww 7mj42102w ww7mj4210hs ww80h7410ew ww80k42e06w ww90h7410ew ww90j6410cw

Malfunction of the SMA Samsung S1043 - it takes in water and stands still. After selecting the program and pressing “Start”, it draws water as expected and sits there. I took it apart and it turned out that the belt had fallen off. I put on a belt - the situation did not change. After collecting water, after a minute the drum will spin 3 times and stop. When you select spin, the water drains, but the drum does not spin. After the water drains, it turns 3 turns and that’s it. Please tell me - maybe this is due to the belt falling off (program failure). How to recover? After drawing water, after some time the heating element turns off - the relay clicks and the light becomes brighter. Look at the wiring harness from the module to the motor. The Samsung F 1043 washing machine is in operation (front loading 4.5 kg). Loops between modes. After the main wash I tried to drain the water and got an error. I replaced the pump, ran a full wash cycle without laundry - everything is fine. Loaded the laundry and started it again. It washes, drains the water and begins to cycle: it turns the drum in different directions, makes noise with the pump, adds time. It seems that the spin should begin, but the speed does not increase. I manually switch the mode to rinse - after draining the water, the same thing happens. The engine, tacho and their chains need to be looked at, but most likely there is a banal imbalance - there is not enough linen. Samsung F1043 washing machine installed. When washing on different programs (I tried almost everything). The device gives an error “6E”, it just stops during washing and that’s it. After resetting (off) and switching on again for rinsing and spinning, the command is executed to its logical conclusion. What could be the problem? There is no such error in the manual! Check the heating element first, its resistance should be around 30 Ohms, the resistance to the body is more than 1 mOhm, it is advisable to measure the insulation resistance to the housing with the heating element covered with water, use a megohmmeter for measurements. We connected a Samsung s1043 automatic washing machine, it does not pick up speed during the spin cycle. She spends a very long time putting the laundry away before spinning, and lately she has been unable to gain momentum for the spinning process for a very long time. Maybe someone can tell me what needs to be done? First, check the condition of the belt (it is advisable to replace it). The Samsung F 1043 machine washes the entire wash normally, but when it gets to the spin cycle (including the intermediate spin cycle), when the drum accelerates several times over the entire acceleration period, the engine jerks on all power so that the light in the apartment dims for a split second, then continues acceleration , as if nothing had happened. What could it be? Help. I'm afraid the machine won't last that long. Check the brushes, tacho sensor. Faulty washing machine S1043 (front loading 3.5 kg). Doesn't drain water, help identify the problem. A standard problem is that when it comes to spinning, the machine periodically freezes. Sometimes the spin mode goes through, sometimes the time stops and the washer tries to drain the water, although there is no more water, but no error appears on the display. I removed the pump (lateral play), there is no rod, but the impeller is hanging on the shaft. I connect the pump to idle, and crackling sounds are heard. It should be? I connected the tester directly to the pump during spinning - the power occasionally disappears and is immediately supplied again, I ran the mode several times, the power always disappears at the same periods of time, and the power loss is not associated with the rotation of the drum, i.e. The drum rotates and the power may go out. The drum rotates in both directions. What is the problem - pump or relay? Replace the pump. And what about the rotation of the drum in both directions? Power is not supplied to the drain pump constantly, but periodically, twice or thrice (I never paid attention to this), the pump turns off, and then turn it on, the drum should rotate in different directions during the preliminary spin cycle. We use R1043, it worked fine for two months, and then it’s just terrible, it constantly gives an IE error code, we have to turn it off and on again, and so on several times per wash. They called a technician and said that the problem was the “water sensor”, after replacing it it worked fine for a couple of days, then the same thing. This error code is not specified in the instructions. The IE error is E7. Regarding the problem: check the rubber tube going to the pressure switch and carefully connect the wires to the pressure switch (block). We repair Samsung s1043 washing machine. The SMA stopped draining water, it writes error 5E. I checked the drain and fill filters, hoses - everything is clean, everything is in order. I removed the front wall, the pump (Askoll), rang the bell - the winding is in order. I collected it, started it in the rinse/spin mode - once it worked just fine, but the next time it didn’t drain again. Tell me, please, what is the reason? The pump (in your case) should not be cleaned, but replaced with a new one! Samsung 1043. Please tell me how I can forcefully turn on the pump to check its functionality, because there is no separate such function. Which wires on the control panel need to be connected? Why from the panel? And why can’t it be disconnected from the pump? Check - force 220 V to the pump. Model S621 Connected the Samsung S621 bio compact fuzzy washing machine. It gives a water heating error. Appears 8-10 minutes after switching on. The error is not permanent, after 2-3 washes, or even after 5 (floating). I soldered everything suspicious, Ten is fine, not broken. The sensor is normal - 14 kOhm. Replaced the heating relay. It didn't give anything. The error pops up periodically. Replace the heating element. Samsung S621 washing machine malfunction. The drum stopped spinning when washing, the spin cycle works. Tell me, could this be due to the heating element, SAM has been working for 6 years? When I turn on the washing machine, it draws water, but when the drum is supposed to spin, this does not happen; the “cotton” light blinks, and the 60 degree and spin lights are constantly on. Before the drum should turn on, the relay clicks and the drum sways a little for a split second. Check the engine block, pressure switch, etc. The belt from the engine to the drum may have broken. We connected a Samsung s621 washing machine, front loading 3.5 kg. Please explain how this can be: I see through the hole for the filter - the pump turns on, the impeller rotates, I blow through the drain hose - there is no blockage, but the water does not drain, what is the problem. Tell me, I don’t understand why replacing the pump can help if, in my opinion, it works. Check the tank-pump drain pipe; if it is clean, replace the pump. Samsung S621 washing machine in operation. After turning on, after 10-15 minutes, a short hum is heard (an attempt to turn on something) and the indicators flash. I checked the filters - clean. The drain led into the bathtub. Was too low - into the sewer. In the manual there is no such combination of lit indicators among the errors. Help determine the cause. Check the heater - heater error.

f1013j f1015j f1215j f813j f843 p1005j p1091 p6091 p805j p843 r1033 r1043 r1052 r833 r843 r852 r861 s 852 s1005j s1021 s1043 s1052 s601 s621 s803j s815j s821 s832 s843 wd806u2gagd wd806u2gawq wd80j7250gw wf f1061 wf f861 wf s1061 wf s861 wf0400n1ne wf0400n2n wf0400s1v wf0408n2n wf0 408s1v wf0500nzw wf0508nzw wf0602wjw wf0602wke wf1500nhw wf1590nfu wf1600wcw wf1600wrw wf1602wrk wf1602xqr wf1602yqr wf1702xqr wf1702yqr wf1802nfws wf1802wecs wf1802xec wf1802xey wf1802xfw wf 3400n1v wf600b0bcwq wf602b2bksd wf602b2bkwq wf602u2bkwq wf602w0bcsd wf602w2bkwq wf60f1r0f2w wf60f1r0h0w wf60f1r1f2w wf60f1r1h0w wf60f1r1w 2w wf60f1r2e2w wf60f1r2e2wdlp wf60f1r2f2w wf60f4e0w2w wf60f4e2w2w wf60f4e5w2w wf6450n7w wf6450s4v wf6450s7w wf6452s4v wf6458n7w wf6458s7w wf6520n7w wf6520s6v wf6520s7w wf6528n7w wf6528s7w wf70f5e0w2w wf7350s7v wf7358s7v wf7450s9c

Is it possible to turn on some function to rinse the SMA with clean water, just without adding SMS? Like rinse and spin? Foam control is a conditional thing. The pump may or may not be turned on for pumping, and if foam starts to flow, the control will not have time. Regarding rinsing - a rinse cycle without laundry and without spinning. I've been using this model for 6 years now. Everything was going well. But recently, water began to pour out from under the lid of the washer. They thought perhaps the rubber on the doors had become weak. I kindly ask you to help with this situation. What to do if the rubber on the doors is really weakened. Do you mean the loading hatch rubber? It could have warped over time or the material may have lost its elasticity. The seal needs to be replaced. We are repairing the S621 fuzzy washing machine with a load of 3.5 kg. Slowly spins the drum. Recently, an error began to appear - 6 lights are blinking: cotton, delicate, rinse, synthetics, fast, spin. The 60 C indicator is constantly on. I did not find a description of such a combination in the instructions. The washer did not spin or drain the water. Cleaned the filter and checked the drain hose. I started squeezing and draining. Now the situation is repeating itself. But the machine drains the water, the drum rotates, but slowly, without spinning both during washing and spinning. The error is indicated by the lighting of the temperature lamps, and the blinking of the operating mode lamps indicates that there is an imbalance error; the condition is that the tachometer registers an excessive level of laundry imbalance. Replaced bearings and seal. Now, when you turn on the spin cycle, an error appears (all mode lights are blinking, and bio 60, 40C and cold light up), what’s wrong? If BIO 60-40-COLD is lit - triac short circuit, and if BIO 60-60-40-GOLD - the door is not closed, check: the motor and the thyristor on it and pay attention to the motor block and the integrity of the wires. SMA for about 5 years. A year ago, a problem arose: when washing it began to bounce very much - turned it off, straightened the laundry, turned it on, order. There were no problems for almost a year. Now the same problem is happening again, and very regularly. I also noticed that this malfunction only appears during spin-up. Precisely, when the rotation occurs counterclockwise, that is, when it has already successfully started to rotate, everything is in order, but at the beginning of the counterclockwise rotation, sometimes these jumps begin, and regardless of whether it is spinning or washing, several times even the belt flew off At such moments. It jumps very much when washing, the centrifugal force, if the speed does not increase on its own, in my opinion, should not be strong enough for such jumps. Again, I repeat, this means precisely during washing, and not during spinning. Can anyone give me any advice? I'm thinking about bearings, but I have doubts because... This only happens when rotating counterclockwise, only during the start of rotation, and never at the right time. Most likely the bearings or pulley are faulty. Damage to the Samsung S621 washing machine, the pump impeller came off. I stopped draining and heard a grinding noise. I took it apart and it turned out that the pump impeller had fallen off. I put her back on the tape, and it lasted for a week. Tell me what to do next? Replacement drain pump. Samsung S621 bio compact fuzzy does not drain, makes a hum. The water does not drain after washing, and the washer makes a hum for about 10 seconds, then pauses for a few seconds, and then hums again, and so on many times. Earlier after switching off/on. draining and spinning took place. Now the malfunction is persistent. Change the pump? Yes, just replace the pump. SMA does not switch from wash to spin mode. The washing machine goes through the washing mode completely; when it switches to the rinse mode, the first two rows of indicators light up and blink, and the 60 and 40 degree indicators light up, but the water does not drain completely. When you turn the rinse mode off and on, the spin continues to work normally. I checked the system for clogs. WATER HEATER ERROR. An error is displayed if the water temperature during heating increases by more than 7 degrees. per minute (overheating) or less than 2 degrees. in 10 minutes (no heating). The washing mode goes through because the error is displayed after the end of a certain phase of operation. The Samsung s621 washing machine is in operation, the drum rotates in one direction. The problem is this: after starting the program, the drum will spin in one direction and the program stops. It presses normally. Can you tell me what it could be? It turns in one direction, maybe due to problems in the control module (relays and their environment). SMA Samsung S621 front loading 3.5 kg. The pump was changed earlier, more than half of the indicators on the panel have not been lit for a long time, but it worked normally (it periodically runs around the bathroom, but not critical). What happened: during the spin cycle, a pop was heard (the sound sounded like an exploding capacitor) - the drum began to quickly spin up to maximum and did not stop until it was turned off with a button on the panel. Now, when you turn it on, water is poured and at the same time the electric motor starts sharply, and turns off after a couple of minutes. The repairman came and said: “the problem is electrical, I’m powerless.” I removed the panel with the buttons - everything was clean (I didn’t find any holes, swelling, or a characteristic smell). Every repair begins with checking the peripherals. Particular attention to the motor and wiring, then the module. Very similar to a triac. it is usually located on a large radiator. Denoted triac1. Included in the diode bridge arm. Check him out too. Controlled by triac1 chip IC4. And check it out. Also check the wiring harness to the motor. It gets wiped and shorts under the tank.

_________________________________________________________________________________

_________________________________________________________________________________

_____________________________________________________________________________________

Operation of the LG SMA I bought an LG E10B8ND DD washing machine and have only washed it 3 times so far. The problem is this. It washes very quietly, since the all-wheel drive goes directly to the drum. Even spinning at 1000 rpm is quiet, but when it drains...

Samsung WF 8590,6450,6520 We repair the Samsung WF8590NMW8 diamond washing machine (5 kg load). The DE error appears on the display, although 220 is supplied to the lock itself (checked). The most interesting thing is that I decided to test the lock on another SMA, and it worked. Has anyone encountered...

Ariston RSM, WMSF, AVTL Washing machine Ariston avtl 104, with vertical loading 5 kg. The situation is very unclear. SMA can wash off normally, but recently it has started to behave strangely. When rinsing, it stops and the indicator on the power button goes out...

Indesit IWSB, WS, WIU, WIN Machine iwsb 5085, description of the problem. She pours water, the drum rotates for a couple of seconds in one direction, stops, then 2 more times, a couple of seconds each, in the opposite direction and silence. The indicators light up as expected, programs switch, but...

______________________________________________________________________________________

FAULTS AND REPAIRS OPERATION AND SERVICE ERROR CODES

______________________________________________________________________________________

Repair of Bosch Maxx 5 automatic washing machine. Bosch maxx 5 speed edition WLX 20463 OE washing machine in operation. I began to perform the washing program incorrectly. We set the hand wash program, the spin was completely turned off. After washing, SMA switched to rinsing...

Candy Aqua, GVS4, GS3, CS2 There is a smell in the gvs4 126dw3 washing machine. I wash with the addition of liquid Calgon, but there is no effect. Sometimes I rinse my laundry with vinegar. If the linen is thin, like bed linen, then it does not smell. But the towels started to smell. What to do?

Electrolux EWW, EW, EWX The Electrolux EWW 1686 washing machine is in operation. It started tapping when washing, regardless of whether it was spinning, stopping before changing modes, or washing. It knocks periodically, not all the time. The sound comes approximately from the control module...

Zanussi ZWY, ZWSE, ZWT Washing machine zwy 51004 wa, bought about a month ago. I set the washing program, the final spin occurs, and the machine starts washing again, and so on ad infinitum, until you just turn on the water draining program. What could be the problem?

Repair of Ardo SED, TLN, FL Ardo TLN 126. It has a display, and when you turn on the washing program, the washing time is displayed. Gradually it should decrease, but here it is. I turn on the 20-minute wash, but in the end it takes 40 minutes or even more to wash, and the time is constant...

Beko WKB, WN, WKE, WM Model WM 3350 E. We started working in the “short wash” mode, the program worked completely (the door unlock button lit up), but water remained inside. In fact, rinsing and spinning did not work. When I tried to reboot, nothing changed, the sensors...

Repair of ACS Gorenje WS,WT Model WS 43100. The fill valve does not open. Writes "Error 9". This is an error related to aquastop. There is no aquastop. I bought a new non-original valve, took the coils from the old one, put it on with difficulty, one might say, hammered it in. I installed it, did a couple of washes...

Whirlpool AWE, WTLS, AWOC We bought a Whirlpool AWE 6516 washing machine with top loading and electronic control. Container for detergents under the lid. I pour the conditioner into the container, and it immediately pours out of the small...

Starting the machine

Having selected the desired option, adjust the temperature and spin speed if necessary . If the desired mode is not found, then the parameters are set manually using the rotary selector on the machine panel.

Modern models of Samsung washing machines allow you to control washing through a mobile application. The owner selects a mode on the phone and starts the process.

If powdered detergent is used for washing, it is poured into the second compartment of the container. In different models it may be designated as “II”, “B” or “2”. For pre-washing, the powder is placed simultaneously in the first and second compartments.

Capsules with gel or powders in tablets are placed directly with the laundry into the drum . The conditioner is poured into the third compartment of the powder receiver.

The amount of detergent is calculated based on the volume of laundry, taking into account the degree of soiling. Such information is always available on the packaging of high-quality powder or gel.

The entire procedure for starting the machine includes:

• selection of mode, temperature, spin speed;
• pouring detergent into the container;
• putting sorted laundry into the drum;
• latching the hatch door;
• turning on the Start button.

During operation, the washing machine shows various icons on the display; read about what they mean (as well as what the symbols on the control panel mean) here.