Instructions and manual for Samsung F1015J in Russian

Washing machine User instructions F…

Washing machine user manual

• Image
• Text
• Content

Washing machine User instructions

F1215J/F1015J

F815J/F813J F611

Code No. : DC68-00905A

Safety Warnings back cover

Installation of the washing machine…………………………………………………………………………………. 2

Unpacking the washing machine…………………………………………………….. 2

General view of the washing machine……………………………………………………… 2

Choosing a place to install the machine………………………………………………………………. 2 Adjusting the height of the legs………………………………………………………………3

Removing the transport bolts…………………………………………….3

Connecting the water supply hose……………………………………………………….. 3 Placement of the drain hose……………………………………………………… 4 Connecting the machine to AC mains……………………………….5

Loading and washing laundry…………………………………………………………………………………………. 6

General view of the control panel………………………………………………………..6 First wash of laundry……………………………………………………………… ……………………9 Loading detergent into the machine…………………………………………..9 Washing using the Fuzzy Logic Intelligent Control System…………………… …………………………………………….. 9 Selecting additional functions…………………………………………………………….. 10 Manually setting the washing mode … ……………………………………………. 10Using the delay start function………………………………………. 11 Washing tips…………………………………………………………………………………………. eleven

Caring for your washing machine………………………………………………………………….. 12

Restoring functionality of frozen

washing machine………………………………………………………………………………… 12

Cleaning the external surfaces of the washing machine…………………….. 12 Cleaning the detergent compartment and the compartment niche……………… 12 Cleaning the debris filter…………………………………… …………………..13 Cleaning the mesh filter of the water supply hose …………………….. 13

Trouble-shooting……………………………………………………………………. 13

Problems and their elimination…………………………………………………………… 13 Explanation of error messages……………………………………………………………… 14

Washing program table………………………………………………………………………………….. 15

Applications………………………………………………………………………………………………………….. 16

Description of symbols on clothing labels……………………………………………………….. 16 Electrical safety warnings……………………………………………………………… …………………..16 Environmental protection ………………………………………………………. 17 Declaration of Conformity……………………………………………………..17Technical Specifications………………………………………………………17

• F1215J/F1015J
• F815J/F813J
• F611
• Safety Warnings Before Using the Washing Machine
• Safety Instructions • SAVE THESE INSTRUCTIONS

Samsung F1015J User Manual

Washing machine

User instructions

F1215J/F1015J F815J/F813J F611

Code No. : DC68-00905B

Safety Warnings back cover

Installation of the washing machine……………………………………………………….. 2

Unpacking the washing machine…………………………………………… 2

General view of the washing machine…………………………………………….2

Choosing a place to install the machine…………………………………… 2 Adjusting the height of the legs…………………………………………….3

Removing the transport bolts…………………………………….3

Connecting the water supply hose……………………… 3 Placing the drain hose…………………………………… 4 Connecting the machine to AC power……… ………………… 5

Loading and washing laundry………………………………………………………….. 6 General view of the control panel……………………………………………………….. 6

First wash of laundry……………………………………………………….. 9 Loading detergent into the machine………………………………………………………. 9 Washing using the Intelligent System

Fuzzy Logic controls……………………………………………………… 9

Selecting additional functions……………………………………………………… 10 Manually setting the washing mode…………………………………….. 10 Using the delay start function………… ……………………. 11 Washing tips………………………………………………………………………………11

Caring for your washing machine………………………… 12

Restoring functionality of frozen

washing machine………………………………………………………12

Cleaning the external surfaces of the washing machine…………………. 12 Cleaning the detergent compartment and the compartment niche…………….12 Cleaning the debris filter………………………………………………………………. 13 Cleaning the mesh filter of the water supply hose …………………..13

Trouble-shooting…………………………………………. 13

Problems and their elimination……………………………………………………….. 13 Explanation of error messages…………………………………….14

Washing program table……………………………………………. 15

Appendices……………………………………………………….16 Description of symbols on clothing labels……………………………16 Electrical safety warnings ………………………………………………………………..16 Environmental protection ………………………………………………………. 17 Declaration of Conformity………………………………….. 17 Technical Specifications………………………………………….. 17

Connecting the water supply hose, To connect the water supply hose, Option

Installing the washing machine, Placing the drain hose

• Image
• Text

Washing machine installation

Connecting the water supply hose

One end of the water supply hose should be connected to the washing machine and the other end to the water tap. Do not stretch the water supply hose. If the hose is too short and

If you do not want to move the water tap to another location, replace the supplied hose with a longer hose that can withstand high pressure.

To connect the water supply hose:

1.

Grasp the 1-piece fitting on

end of the water supply hose and connect it to the cold water supply connection located on the back wall of the washing machine. Tighten the connection by hand.

2

. Connect the other end of the water supply hose to the faucet

cold water and tighten the connection by hand. When

If necessary, you can change the position of the end of the water supply hose connected to the washing machine, for which

loosen the fitting, rotate the hose and tighten the fitting again.

Option:

1. Grasp the red 1-piece fitting at the end of the hose to

hot water supply and connect it to the red hot water connection
located on the back of
the washing machine. Tighten the connection by hand.

2.

Connect the other end of the water supply hose to the
hot water faucet, and hand tighten the connection.
3.

If you only want to use cold water, use U-

shaped tee.

Placement of the drain hose

The end of the drain hose can be positioned in three ways:

Hook on the edge of the sink

The drain hose should be positioned at a height of 60 to 90 cm. To ensure that the end of the drain hose is bent, use the plastic hose holder supplied with the machine. Attach the holder to the wall with a hook or to the faucet with twine so that the drain hose cannot move.

Insert into sink drain outlet

The outlet into which the drain hose is inserted must be located above the sink drain siphon and so that the end of the drain hose is

at a height of at least 60 cm from the floor level.

Insert into the drain pipe of the sewer riser

Samsung recommends that you use a vertical

outlet pipe 65 cm high; its height must be at least 60 cm and

no more than 90 cm.

4

Detergent dispenser, Display panel, Wash mode selection button (program)

• Image
• Text

Loading and washing laundry

1. Detergent dispenser

2.

Display panel

It shows the time remaining until the end of the wash cycle and

error messages.

3.

Washing mode selection button (Program)

Press the button to select one of the eight available washing modes.

Cotton (COTTON), Co!oig (COLORED FABRIC), Synthetics (CHHTETH4ECKAH FABRIC), Delicates (DELICATE), Woo! (mEPCTb), Quick (QUICK),

Rinse+Spin(RINSE+SPIN), Spin(SPIN),

4. Option button

Press the button sequentially to cycle through the available
partial wash functions:
[Rinse+ ^ Prewash ^ {Rinse+ + Prewash} ^ Cancel ^ Rinse+] Note :

The pre-wash function is only available when

mode: Cotton, Colored, Synthetic, Delicate

5. Spin speed selection button

no spin n> rinse delay n> Sapse!(CANCEL) n> no spin

6. Water temperature selection button (Temp.)

Press the button successively to cycle through the available

washing water temperatures (Cold water, 30°C, 40°C, 60°C and 95°C)

When you press this button while the machine is running, you can see the selected water temperature on the display panel.

7. Start/Pause button

Press to pause and then restart wash cycles.

8. F button (On/Off)

Press the button once to turn on the washing machine, press

again to turn off the washing machine. The machine turns off automatically if it is left on for more than 10 minutes without pressing any button.

WITH

washing machine stops execution

current stage of the wash cycle, or does not advance to the next wash stage (The time remaining until the end of the wash cycle indicated on the display may increase).

Your new washing machine is equipped with an Intelligent System

Fuzzy Logic control, which not only sets the optimal water level and optimizes other washing parameters, but also controls the washing process, making the necessary adjustments to

obtaining the best washing results. If any of the above in bold occurred,

The Fuzzy Logic control system may have detected deviations from

normal wash cycle parameters, such as too much detergent remaining at the end of the cycle

washing, strong vibration during spinning, etc.

If such violations are detected, the washing machine pauses the normal course of the program in order to correct the relevant parameters and continue washing. The Fuzzy Logic control system makes 7 attempts to eliminate these

deviations.

If the above deviations cannot be corrected using Fuzzy Logic, the corresponding error will appear on the LCD display.

message (see chapter “Troubleshooting”). The behavior of the washing machine corresponding to the above description is considered normal.

8

Malfunctions of the Samsung F1015J machine and how to fix them

_____________________________________________________________________________

_____________________________________________________________________________

• All SMA Samsung models

Samsung F1015J Sensor Compact washing machine installed. In the “synthetic fabric” mode, it pours water, washes, tops up, washes, etc., at the 10th minute it tries to do something and gives error 6E. There is no such code in the instructions! In the "quick wash" mode, everything is fine, what does this mean? Error E6 - problems with water heating. Feel free to change the heating element, there is a high probability that it has burned out. The essence of my problem is this: a hum appeared during the spin cycle; and if you turn off the already “empty” machine and manually turn the drum, then there is a “rattling” sound. I suspect that the reason lies in the bearing, I am going to change it myself. The questions are as follows: Is it necessary to remove the entire drum to replace the bearing, or will it be enough to just remove the crosspiece, as in the general example for the Gorenje apparatus? Please tell me the exact number of the original oil seal for my model and the number of the SKF bearing or another equivalent of no less quality. Samsung and Gorenje have little in common. In your case, you need to disassemble it, starting from the top cover and the front wall, then pull out the tank and then everything will be visible. Oil seal 25*50.55*10/12. F1015J machine malfunction. When starting any program, it writes DOOR and beeps 5 times. There are 4 contacts on the locking device. 2 of them have a resistance of 180 ohms, i.e. the electromagnet winding and the other two power limit switches are triggered when locked; the wiring and contacts are in order. Replacing the thyristor did not help. What do you advise? Run a tester along the blocker control circuit. The machine in operation is an automatic Samsung F1015J Sensor Compact. From time to time, when the drum starts to rotate, it starts to growl and the drum tries to spin, but cannot. The belt is intact; when the hatch is open, the drum rotates freely without interference. SMA can stretch completely normally, she can growl once, or she can growl the whole wash (probably depends on her mood). This does not particularly depend on the amount of laundry being washed. It appears both during washing and during spinning (in any mode). This has been happening for about 4 months now. Check the brushes, clean the rotor, carefully inspect the belt. The front-loading model weighs 4.5 kg and does not drain or spin after washing. But after turning it off/on, turning on this mode separately, that is, draining and spinning, works fine. What’s alarming is that in order to finish washing you need to turn off the washing machine, then turn it on and put it on drain, and then on the spin cycle, that’s the only way it washes. If the heating element works, change the pump, of course, you can look at the thyristor on the module that controls the pump, but I think 90 percent is the pump. Samsung F1015J washing machine malfunction - the pump burned out. The triac on the module that controls the pump has failed (burnt out). I looked through the entire module - all the tracks are intact. The 620 ohm resistor, which is open in the triac control circuit. The rest of the resistors are normal. R48 (which is broken) goes to KID 65003AP. What is the functional purpose of this microcircuit? It controls triacs. There are two of these ICs on the module. Do I need to change the KID 65003AP IC (which controls the pump)? Or it is enough to restore the triac circuits. Everything works on the SM except for draining the water. Could the port on the controller (microprocessor) burn out? If a port on a microprocessor burns out, is it possible to further repair the module or just buy a new unit? Pump motor control circuit: microcontroller port P 52; IC KID 65003AP, 16-pin triac control; triac cascade: two resistors, two capacitors, the M2Z47 triac itself. What is advisable to change? The triac itself, resistors, IC KID 65003AP. Do you need to change capacitors? They have an operating voltage of 650 V. They say 10 n J. This is what the rating is -10 nanofarads. How to check the functionality of a microcontroller port? Change the triac and check the unit. Installed model Samsung F1015J Sensor Compact. During the rinse mode it stops, the water does not drain, only a hum is heard. More details: When washing, water is poured in and drained, it reaches the middle of the rinse cycle, sometimes until the end of the rinse cycle, and then it stops and hums (the water does not drain). Once the stop occurred 20 minutes before the end of the wash, today at 5 minutes, sometimes the wash proceeds normally with spinning and rinsing, the debris filter is clean, the pipes to the pump are not clogged. In work for 6 years. What could be the reason? The drain pump needs to be replaced. Spin problem. It is difficult to press 8, the transition to 7 and back takes so long, sometimes error 4E appears. Error code 4E is a disease of these models; you need to arrange your laundry correctly and not wash one item at a time. The 1270J5 belt may be worn or stretched, as well as the motor brushes and the triac on the module. The Samsung F1015J washing machine is in operation with a load of 4.5 kg. She is 6 years old. First, a leak appeared (on the side), small when taking in water and during washing, apparently when changing the water. After the hose broke off in the front (probably the drain / on the left behind the front panel), they called a technician, he put on the hose, tested the washer, said the drum, the engine is normal and will last for a long time, closed everything and left, the next day it started leaking a little on the left again (this he didn't even look). Yesterday the hose in the front tore off again (apparently from vibration), today I removed the front panel and put the hose on myself, but the only problem remained: when you add water, there is a small leak (when you turn it on, add water, and turn it off, you can hear water dripping on the bottom, where is it? take a look at troubleshooting this problem, preferably in more detail). Remove the top cover and see where the leak is. And often the joint leaks at the junction of the hose leading from the detergent hopper to the tank (behind the front wall, under the hopper), then you need to either change the hose for a new one or put it on an adhesive-sealant. Tell me if there is any point in a water softening filter? In our city the water is hard, and this seems to be the worst thing for washing machines. No, it is very harmful for the machine. As part of the filter, hexametaphosphate-one destroys the fill valve, settles on the heating element and will remain on the laundry during rinsing. In fact, this is a component of Calgon, which our citizens actively pour into washing machines, hastening their breakdown. This equipment has broken down. The “coils” on the drain pump burned out. After installing a new pump (exactly the same one), the following things began to happen: when you press the “power” button, simultaneously with the lights on the panel lighting up (like “ready for work”), the hatch cover opens and when you try to close it, the lock “cracks.” What could this be and how can I fix it? Check the locking of the hatch, its power supply circuit, the triac on the module for the pump. If the car was turned over to replace the pump, water could get into the UBL. We connected a Samsung Sensor Compact F1015J washing machine with a load of 4.5 kg. Recently after washing it started to smell terribly, I quickly turned it off. The next day I tried to turn it on and wash it. Halfway through the wash she suddenly stopped and that was it. Instead of turning the drum, it just starts humming slowly, hums, stops, then immediately starts humming again. It doesn’t drain the water - it hums, again, it doesn’t squeeze out - it hums. The second day there is no water, it won’t let me open the door. Here's the question: How to open it? How serious is the damage? Unplug and wait five minutes. Lower the drain hose into a low basin and drain the main amount of water, remove the bottom bar and in the lower right corner you will see a yellow ring, pull it, the door should open. After this, you need to unscrew the filter cap, drain the remaining water and clean the filter. The SMA erases for about 15 minutes, then it stops and buzzes, it doesn’t write any errors, you have to drain the water manually, please tell me how to fix it. See filter. It should be written in the instructions. And check the drain pump.

_____________________________________________________________________________

_____________________________________________________________________________

_____________________________________________________________________________

_____________________________________________________________________________

Troubleshooting and breakdowns in the Samsung SMA Need advice on how to repair the Samsung WF 7452S9 R washing machine. The following happened: the automatic plug breaks when starting the rinse or wash program modes. Read more

How to troubleshoot problems with Beko WMN washing machines. Washing machine WMN 6510 N. When spinning, the tank begins to shake violently and the rubber cuff of the tank begins to slam. At the very beginning of operation in October 2002, the same thing happened. Called the master Read more

Problems with Bosch WLG washing machines - Repair recommendations When the WLG20265OE washing machine operates in any mode (spin, rinse, wash) when setting any speed (100-1000), the machine reaches maximum speed Read more

Questions about operation, malfunctions and service of the AEG SMA I have an AEG AMS 7500i (narrow) machine. When washing, a squeaking (grinding) sound occurs, similar to the squeak of rubber. What could this be and could it cause it to break? What you need Read more

Tips for troubleshooting SMA Ardo SMA SE 1010. It rattled in the pump area, the laundry came out wet. A coin was found in the filter. I removed and disassembled the pump. It turned out that the rotor is something like Read more

Questions about the operation and breakdowns of the Siemens ACS In operation WM10N040OE. When water is drawn into the drum, when turned on, water immediately begins to flow from below. I checked the hoses - they are intact, but they are leaking from all sides. Please tell me what the problem is and how Read more

Problems, adjustments and settings of Whirlpool AWG washing machines Model AWG 223. Was washed for 2 years without problems. Now I have stopped spinning in the rinse-spin mode, just spin. Haven't tested it in other modes. The drain pump is heard, the drum is spinning, but Read more

Recommendations for troubleshooting in SMA Atlant The Atlant 50C81 washing machine is in operation. Instead of rinsing, I accidentally turned on the express wash and, already during the cycle, tried to switch to rinsing without stopping the unit Read more