Top-loading washing machines ardo: device of automatic machines with top loading. malfunctions

Review of the best models

Ardo produces many high-quality and multifunctional washing machines. Each model has its own individual characteristics and features. Let's take a closer look at some of the top Italian-made devices and learn all about their functionality.

33FL105LW. Popular narrow front-loading model. The automatic machine has an attractive design and has a loading capacity of 5 kg. The device belongs to the sought-after energy consumption class A+++, has partial protection against leaks and a display that displays information about the selected mode and washing time. Drying is not provided here, but there is automatic balancing, a program for washing delicate items, an enlarged hatch and the ability to reload laundry.

Let's prepare for disassembly

Before you begin disassembling washing equipment with your own hands, you must be prepared for the work. First of all, you need to disconnect the unit from the power supply. Next, you need to turn off the tap responsible for supplying water to the system, remove the inlet hose and drain hose. After the washing machine is disconnected from communications, you should move the device to a place convenient for disassembly. To disassemble the washing machine you need to prepare the following tools:

two types of screwdrivers (flat and Phillips);
small hammer;
wrenches of different sizes;
pliers and pliers;
puller (if bearings are to be removed);
screwdriver;
heads for loosening nuts and unscrewing bolts.

Article on the topic: Sink that is installed above the washing machine

Having all the listed tools in your arsenal, you can begin work. The process is not quick, so we advise you to stock up not only with patience, but also with free time.

Where are Ardo washing machines made?

Top-loading washing machines: pros and cons, best models

Many European famous brands have production facilities in countries with cheap labor - in particular in Asia and Eastern Europe. Models released under the same brand, but assembled, for example, in Germany and China, differ strikingly in build quality. If the first ones last for decades, then the second ones last about 5 years. True, the cost of European-assembled devices is much higher.

The advantage of the Ardo brand is Italian assembly. That is, all products under this brand that come to Russia are made in Italy. On the outskirts of the Italian city of Fabriano there are three large enterprises: one assembles “front-facing” versions of machines, the other “vertical” ones, and the third one assembles drying drums.

Russians can also purchase domestically assembled devices. Ardo cars have been assembled in Russia since 1997. Their difference from their European counterparts is that they take into account the local specifics of operation, namely the hardness of tap water.

The most common fault codes

Knowing these codes will help you quickly and timely “diagnose” the washer:

E00, E01 – drain filter clogged. The problem manifests itself in the fact that water does not leave the tank.
E02 – the drain hose is not positioned correctly, so the water does not drain.
E03, F4 – the pump is faulty. Because of this, the water takes too long to drain.
F2 – failure of the electronic module, temperature indicator or heating element.
F5 – spontaneous draining of water by the washing machine due to incorrect connection of the hoses.
F13, F14 – problems with the electronic board.

Important! If one of the listed codes appears on the display of the washing machine, except for the last one, you can solve the problem yourself. To independently flash an electronic module, you need special knowledge and tools.

Now we will look in more detail at each of the breakdowns and ways to troubleshoot the Ardo washing machine, and also find out how to quickly clean the washing machine from mold and black fungus at home.

Types of breakdowns and reasons for their occurrence

A washing machine is a rather complex piece of equipment, so malfunctions of the unit can be caused by many reasons. But some of them are much more common than others. Here is a sample list of them:

User forgot to remove shipping bolts

If this is not done, then after shaking on a long journey, the unit will end up in a warehouse or shopping center in very poor condition.

Before the first start, these bolts must be removed, which some buyers do not do due to forgetfulness. Of course, in this state of affairs, the unit will not be able to work properly.

The machine was installed askew

All washing machines must be installed in a strictly horizontal position. The correct installation is controlled by the building level. If there is a misalignment, the rotation of the drum, especially in the spin mode, is accompanied by excessive vibrations and noise.

Poor water quality

The scourge of all washing machines, like boilers, is scale - a hard, porous deposit of calcium and magnesium salts (hardness salts), which forms especially actively in hot water. The heating element becomes covered with deposits, as a result of which it initially loses its ability to quickly heat water, and then completely fails.

Article on the topic: How to clean the filter in a Zanussi washing machine

Violations of operating rules

Many users themselves create problematic situations by ignoring the instructions given in the instructions.
For example, overloading the machine with laundry or, conversely, starting an almost empty unit leads to undesirable consequences.

Also, do not overfill the distribution container for detergents - powder and other chemicals must be poured in the quantities specified in the instructions.

Problems often arise because powder left in a container for a long time cakes, making it difficult for the machine to absorb it.

Some models react painfully to switching a washing program before the current one has completed.

And another emergency situation - the user started the machine, forgetting to close the drum.

Water getting into “where it shouldn’t”

Incompatible things - water and electricity - have to be combined willy-nilly in a washing machine. No matter how hard manufacturers try to seal electrical contacts, water often manages to short-circuit them. Moisture shows particular insidiousness in the form of ubiquitous steam, which easily penetrates into the most inaccessible places and immediately cools down and turns into condensate.

Peculiarities

Top loading washing machines

Ardo is the author and manufacturer of combined tanks - they are based on stainless steel, and the outer part is covered with heat-resistant plastic. This tank heats up quickly and retains heat for a long time, which allows you to reduce energy consumption during the washing process.

In addition, the metal blank of the tank is combined with enamel using a special technology, which suggests increased protection of the tank from corrosion. Finally, the tank has an Eco-Carbon coating that absorbs noise.

The drums of Ardo machines are made exclusively from stainless steel, which allows them to demonstrate reliability and strength even under increased loads, as well as the ability to withstand centrifugal force.

The Ardo machine is equipped with a permanent magnet inverter motor. It reduces the noise level of the device and increases its functionality.

As already mentioned, the manufacturer relies on the economical operating mode of its products. To do this, modern models of washing machines are equipped with the “Easy Logic” system, which automatically calculates the required volume of water for a specific wash and energy consumption. The built-in Janus system allows for self-diagnosis of the machine.

The Eco Ball system allows you to improve the quality of washing, regulate powder consumption and ensure better dissolution and penetration into the fabric structure. Most models, even inexpensive ones, are equipped with a delayed start function.

Let's start the process

Disassembling the Ardo machine begins by disconnecting the top cover. The platform is attached to the body with two self-tapping screws. They unscrew, after which the lid moves back a little and rises up without much effort. Next, the process of disassembling the unit is performed as follows:

remove the counterweight of the washing machine; to do this, unscrew the 3 bolts holding the load;
remove the detergent tray;
remove the control panel of the machine, to do this, unscrew all the screws holding the part, and also unclip the plastic fasteners located around the perimeter;
disconnect the terminals and filling pipe from the dispenser, remove the dispenser box from the body;
remove the metal clamp holding the sealing collar. To do this, pry the ring with a screwdriver, unclip the lock and pull out the wire;
tuck the cuff inside the drum.

Now you can proceed to disassembling the rear part of the unit. The algorithm of actions is extremely simple.

We remove the back wall of the case; to do this, unscrew all the fastening screws.
Remove the drive belt.
We disconnect the contacts leading to the heating element, the electric motor of the washing machine.
We unscrew the bolts holding the motor and remove the motor from the unit (to do this, you may need to tilt the washing machine).
We put the washing machine on its side and begin to remove the shock absorbers.
We detach the pipe from the drain pump and all the wiring leading to the pump.
We install the machine vertically and remove the tank with the drum from the body.

Article on the topic: Which outlet to choose for a washing machine

By following these steps, you will almost completely disassemble the Ardo washing machine. If replacement of bearings or oil seal is required, you will have to additionally remove the pulley from the drum and disassemble the tank. Only after this will you gain access to the mounting location of the bearings and oil seal.

As you understand, doing the work yourself is not difficult. You can replace the main parts and components of the SMA yourself, without the help of professional repairmen.

How to use the Ardo washing machine?

LED lamps “feron”: reviews, pros and cons of the manufacturer + best models

To simplify operation as much as possible, the manufacturer is trying to replace the inscriptions with intuitive icons. The number of functions may vary, but the designations are the same on all models.

Most common icons:

Cotton. A cotton boll is shown. Temperature - 60-90 °C. Cycle time is 145-170 minutes.
Wool. A ball of thread. The most delicate mode. 56 minutes.
Express. Mode for lightly soiled items. Т=35 °C. 35 minutes.
Synthetics. A flask is shown. 127 minutes.
Express 20/35. Operate at 35°C for 20 minutes. For lightly soiled items.
Handwash. For delicate items. T=30 °C. 100 minutes.
Sport. T=40 °C. For items that do not need ironing.

To select the appropriate option, you need to set the mechanical regulator to the appropriate position or press a specific button. The selected mode will be shown on the display until the cycle ends. Having installed and configured the desired program, you can add an additional function by pressing the appropriate button.

Repair cost

The cost is announced after a conversation with the client based on the described faults. But the exact amount is revealed after inspection. Before the repair itself, the master names the exact cost. And if you agree, he starts working. In any case, prices are affordable for everyone.

The service center carries out equipment with vertical or horizontal loading on-site. If you are faced with a broken washing machine and don’t know what to do, call a professional technician at your home by phone or fill out an application on the website.

« Repair of washing machines South Tushino | Washing machine repair Kandi Vao »

How does a washing machine work?

The automatic washing machine of the Ardo family is assembled from elements that are structurally practically no different from analogues used by other manufacturers.

Components:

Tank. Container for water and detergent.
Drum. This is where laundry is loaded. Metal tank that rotates during washing. The metal is perforated to allow water to flow from the reservoir.
Water pump. A pump that pumps out water accumulated in a tank. After each cycle, the pump drains the water used during the washing, rinsing or spinning process. In Ardo machines the pump is located at the bottom left.
heating element. Heats water to the set temperature. If necessary, it can be heated to 95°C.
Electrical engine. Rotates the drum. Fixed under the tank.
Filling electric valve. It is located at the junction of the housing and the inlet hose. Serves as a barrier between tap water and the communications of the device.
Control Panel. It can be electronic or mechanical. With its help, the user selects modes and sets settings. Control is performed using buttons and toggle switches. Ardo also has a display.
Control module. The “brain” responsible for all the work and quality of washing.
Loading hatch. An opening with a door through which laundry is loaded.
Dispenser. The user pours powder here before washing things.

DIY repair basics

Here are general instructions regarding repairs:

Tool

Most of the operations are performed using the most common tools - wrenches, screwdrivers, pliers, wire cutters, knife, etc.
To check the condition of the electrical part, you may need a multimeter and a phase indicator screwdriver.

In addition to the standard tool, sometimes it is necessary to use a magnet on a nylon thread or a nylon cord (helps to remove screws or some metal debris that have fallen into it from the machine), as well as a flexible metal ruler 70 cm or more long. The ruler is indispensable if you need to turn the drum into its normal position after it has been put into operation with the loading hatch open.

Article on the topic: Which outlet to choose for a washing machine

A non-professional repairman may only need a special tool to replace bearings - this operation is performed using a special puller. It should be noted that it is better to entrust such repairs to a specialist, since in the absence of experience the axle shafts can be damaged.

Safety precautions

Before starting repairs, you need to turn off the power to the machine and turn off the tap that supplies water to it.
Connection to the network during repair work is allowed only in special cases, when, for example, it is necessary to verify the presence of voltage at the contacts of the heating element. When starting to assemble a unit after repair, novice repairmen sometimes encounter a problem: it is difficult to remember which connectors are connected to which wires.

To avoid such situations, the wires and fastening diagram of various components must be photographed before the next stage of disassembly.

Well, the theoretical training course is over. Now let's see what failures we encounter most often.

Design Features

What types of tanks are there?

Ardo water tanks can be made from different materials. The first option is stainless steel, the second is enameled steel. Enameled containers are the company’s own development. Thanks to high-temperature treatment at 800 °C, the enamel firmly adheres to the metal, so the container is reliably protected from corrosion.

Enameled versions are more durable than steel ones. But the latter provide the fastest possible heating of water. However, steel containers cool down quickly and are quite noisy during operation.

The company's developers have created a combined tank made of stainless steel and thermoplastic. Such a tank heats up quickly, but cools down slowly, which reduces energy costs. Thermoplastic reduces noise levels. The company called this material ecocarbon. It is distinguished by strength, durability, and lightness.

How much do the drums cost?

The drums are made of stainless steel. Since this element experiences heavy loads during operation, only metal can withstand them. The manufacturer supplies high-quality drums with standard-sized holes. Ardo does not install innovative modifications with “honeycombs” that provide a more delicate wash on its machines.

Protection and safety

The manufacturer has provided:

Overfill protection. If the system breaks down, the tank may overfill. By activating the protection, water is removed. You can see the corresponding error code on the display.
Overheat protection. There is a temperature detector in the tank, the readings of which are monitored by the controller. If necessary, he turns off the heating element. To protect plastic sewer pipes from overheating, the device first dilutes hot water with cold water, and only then drains it.
Door lock. While the drum is rotating, it is impossible to open the hatch door.
Balancing system. Ensures uniform distribution of laundry before spinning. This reduces vibration and drum movement.

Electronic "brains"

Thanks to the Easy Logic function, operating washing machines has become even easier. All the user has to do is put dirty laundry in the hatch and select the desired programs. The device does the rest on its own - it determines the weight of loaded items, the required amount of detergent, etc. The display will show the time available for the cycle that is optimal in terms of water and electricity consumption.

Many Ardo machines are also equipped with the Janus self-diagnosis function, which detects breakdowns and notifies the user about them.

Electrical diagram

On the designation diagram:

BL - hatch blocking;
F - network filter;
RU - level relay;
K - power button;
EMC 1 and 2 are valves.

The control module and the electrical circuit elements connected to it jointly control the operation of the device and monitor its serviceability.

Photo of ARDO repair with disassembly to the ground.

On this page we have selected a photo of the dismantling of Ardo right down to the frame . The case of disassembling Ardo down to its elemental base became a clear example of what happens to equipment during intensive use. So let's look at the photos of the renovation.

We remove the back cover - in the photo there are elements of the electrical circuit, part of the pipe and the stainless metal of the drum. The wiring is done quite neatly. The insulated conductors are collected into bundles and neatly plugged into the terminals.

In the next photo, the yellow-green ground wires and the metal outline of the stainless steel turned out especially well. The electronic module and terminal strip turned out a little blurry.

Side view of the back of the washer.

A wheel that transmits torque to a rotating drum; The crosspiece of the tank, which gives it rigidity, is a high-quality casting. The heating element is located inside, connected by black and white conductors. Power cord and drain hose in frame.

All the ins and outs of ARDO: Antonio MERLONI SPA; Via Vittorio Veneto, 116; 60044 FABRIANO (AN) ITALY; Model WD1000X 20014624179 05 Made in Italy; 230V 50Hz, IPX4 0.05-1Mpa; 5kg 2.5kg 10A 2200W; type ME03 PCT – Russian certification of goods.

The front panel of ARDO is a reflection of Italian design: round and rounded handles, oval buttons and indicators, apotheosis - Made in Italy

. So, let's take a closer look: BIANCHI CON(SENZA) PRELAVAGIO, COLORATI RESISTENTI DELICATI. Further inscriptions: RISCIACQUI (AMMORBIDENTE) E CENTRIFUGA, SINTETICI CON PRELAVAGGIO. RPM 1000/500, scales, water fill, centrifuge cancel, on/off. Temperature regulator 30 to 90 degrees Celsius, washing time, program selection. SINTETICI SENZA, TESSUTI MISTI DELICATI, SCARICO, LANA. The inscription on the hatch is 20014624179 014105018 01 05. Green light bulb 220 Volt, drum made of perforated stainless steel.

Article on the topic: Is it possible to pour vinegar into the washing machine?

Where to buy spare parts?

Inexperienced machine owners often look for spare parts on websites that sell used items or in specialized stores. But it is not always possible to find the required part on sale. It is much easier to buy it for domestically assembled equipment than for imported ones. In order not to waste time searching, it is better to immediately contact a specialized service center. If the part is not there either, it will be ordered for delivery.

WDOI 1063 S: Sofia Ch., Pskov region.

Built-in device for 6 kg. Dries things great. I save a lot of time on hanging and ironing. If you wash every little thing - socks and underwear, then when drying at 600-800 speeds, they are not wrinkled at all, no need to iron. There are many programs, it’s convenient that you can set the drying time. There are also disadvantages - after the process is completed, the dried items need to be taken out, otherwise they will wrinkle in the drum.

FLSN 105 LA: Igor M., Yurya

Works quietly. There are so many modes that you can get confused, but I just need to wash things. The design is top notch. It washes well even in lukewarm water. Italian quality does not fail. I was looking for a temperature controller, but it turned out there wasn’t one, the degrees are included in the programs, of which there are 13. Excellent spin, I take out the laundry half dry, so it dries quickly.

Ardo washing machines are represented by a wide range of models; the manufacturer has tried to satisfy all consumer needs. All models, regardless of cost, are of high quality and durability. The brand produces products aimed primarily at consumers in the middle price range.

Bad 1

Interesting 2

Super 1

Electronics Troubleshooting

Replacing the control board is not difficult at all. Moreover, it is not always necessary to completely change the module. Sometimes repairing the board is enough.

Important! The cost of the electronic module is quite high. Its price sometimes reaches 30% of the cost of a washing machine. Often, many owners, not wanting the hassle of repairs, simply buy a new unit. Repairing a board yourself requires professional knowledge. Therefore, it is not worth the risk. It is much wiser to invite a specialist.

Ardo in action

Waste collection Ardo Violaines

On the occasion of the World Cleanup Day, Ardo Violaines organized the first challenge “PURE your factory and its environment” …

Running race Ardo Violaines

What an energy at Ardo Violaines! A sporting moment full of togetherness, pleasure and joy in the colors of Ardo.

Ardo Family day

On the 8th of September Ardo Ardooie, Koolskamp en Kortemark organized a Familyday. 148 Ardo-colleagues and their families walk…

Theme day @ Ardo Orehoved (DK)

Once a year Ardo Orehoved (DK) organizes a Theme day where all employees from the factory are present, focusing on a new topic….

Ardo Academy

21 Ardo employees recently graduated from the Ardo Academy. The Academy is designed to teach new colleagues all faces of our c…

Staff party Ardooie

On March 16, the employees of Ardo Ardooie were invited to their staff party at the Fabriekspand in Roeselare.The black box was…

Staff party Koolskamp

On March, the 9th the employees of Ardo Koolskamp were invited to their staff party at Domein Vossenberg. Drink, food & hap...

[email protected]

Let the weekend start together with colleagues on Friday! Fun, drinks, music & happy times: those were the ingredients of t…

Students meet CEO

Throwback to a pleasant introduction between Ardo & the Electronics-ICT students of VIVES University Bruges.

With 19,000 steps walked by each participant, Ardo has emerged as “Flanders' fittest workplace”.

Christmas exhibition @ Ardo UK

Bev Senior (BSM) and Mihaela Costea (Marketing Executive) from Ashford attended Christmas themed customer exhibition to promote…

Advantages and disadvantages

Ardo brand machines have many advantages, including:

Minimum noise level in wash and spin modes. Achieved through the use of durable materials. Practical and varied spinning and processing programs;
Resistance to different operating cycles, long service life - ensured by the ability to replace machine elements. If a malfunction occurs, an experienced technician will help eliminate it in 90% of cases;
Low price compared to machines from other manufacturing companies. Convenient and intuitive control panel. Almost all the buttons are labeled, and if the user cannot figure it out, the system will prompt the desired washing mode or additional function;
Modern design and several options for painting the body - models are usually presented in 3 colors: white, silver, black and have a laconic style. Household appliances have a cuvette for powder.

After a long time of operation, several main disadvantages of Ardo machines can be identified. For example, due to unreliable fastening of shock absorbers, they often break. The spring that holds the tank of the machine breaks. Replacing it forces owners to pay a considerable amount for the repair of household appliances, since they need to order a new part. Replacing components is expensive.

Washing quality SMA Ardo

The brand's products are famous for their consistently high performance results. Most products have a wash class higher than A. This is determined by design features and the use of innovative developments.

The Eco Ball option is responsible for the effective use of chemical compounds. It controls the consumption of powder and additives, limiting itself to the minimum required quantity.

The programs are selected in such a way that the laundry is evenly treated with a soap solution, and the effect on things is gentle. Water at the desired temperature is smoothly fed into the drum. This allows you to achieve clean laundry with minimal consumption of resources.

How to disassemble the washing machine: preparation

To completely disassemble the equipment you need enough free space. Unplug the machine and move it to the center of the room. If possible, you can take the SMA to the garage and start working there.

To repair any vertical “Ariston”, “Whirlpool”, “Ardo”, “Candy” you will need a set of tools:

You will also need a container to collect water and dry rags. To remember the placement of wires and contacts, it is better to arm yourself with a camera. This will allow you to reconnect the wiring correctly.

How to disassemble a vertical washing machine?

Look at the operating instructions for the washing machine. Usually there are diagrams of the equipment. This will make it easier for you to navigate the components and parts of the unit. Electrolux, Whirlpool, Brandt, Indesit vertical loading machines are disassembled in approximately the same way. Differences may be in small parts and fasteners.

Proceed with the repair:

How to disassemble the cover of a vertical machine? To do this, lay it on a flat surface and follow the recommendations:

The video will help you cope with disassembling the cover:

Now you can repair or replace faulty elements. And at the same time, clean the equipment from debris, mold and mildew, and inspect parts for corrosion. Remember and photograph the correct arrangement of components in order to successfully assemble the machine after repair.

Source

Ardo fault codes

Error codes will help determine the location of the problem: E00/E01, E02, E03, F2, F4, F5, F6/F9/F12, F8, F13/F14. The control board diagnoses the system in the event of a breakdown and displays a set of symbols on the display. Each one points to a different problem. Error explanations can be found in the operating instructions and our article.

Typical faults

Ardo washing machines are divided into two main categories based on loading type:

The Ardo top-loading washing machine has a compact body that easily occupies the space between the bathtub and sink. But it doesn't come without its drawbacks.

Here's what users are complaining about:

Other problems are similar to front-facing models. Here are the most common ones:

Let's figure out how to make your own repairs.

SM "Ardo": do-it-yourself repairs

Some breakdowns can be fixed without the help of a specialist if you follow our recommendations.

The SMA hums, makes noise, vibrates

Is your car recently purchased? When you first started the unit, did it start jumping and rattling? Check that the shipping bolts have been removed. They secure the tank in place to prevent damage during transit.

Also make sure that the equipment is level and stable on the surface. The floor must be level and hard. Tighten the legs of the machine if necessary.

The most serious failure is bearing wear. In this case, not only a hum is heard, but also a grinding sound (with severe wear). Replacing a bearing is considered a complex repair. How to disassemble the Ardo SM and install a new bearing, watch the video:

The new thermistor is simply inserted into its original place and a terminal is connected to it.

You will not be able to repair the electronic module yourself unless you have special skills. The electronic board is an expensive part, so it is better to contact a service center.

We looked at the main breakdowns of the Ardo SM, now you know how to repair the equipment yourself.

Typical malfunctions of Ardo washing machines and options for eliminating them

Water does not fill into the car.

Solutions: 1. It is necessary to check the presence of water in the water supply. It’s trite, but very often the cause of an imaginary problem is such funny things.

2. The inlet hose is squashed or clogged. We check visually for the absence of compression. We unscrew the hose from the washing machine, open the tap and see if the water will come through? Of course, you need to make sure that the water does not flow onto the floor. If the water does not come out, we find and remove the blockage. The hose with the leakage valve will have to be replaced with a new one after the protection is activated.

3. Clean the inlet filter mesh on the back wall of the washing machine. The mesh is quite fine and often becomes clogged with rust or other particles from tap water. The filter can be easily removed using pliers and cleaned thoroughly.

4. You need to make sure that the fill valve is working properly. It is located immediately behind the filter. The valve becomes accessible after removing the top cover of the washing machine. Perhaps the power wires have come loose or frayed. To check its functionality, the valve itself can be removed and connected to the voltage indicated on its body. Must open. If it doesn't work, you'll have to replace the valve with a new one.

5. The problem may be due to a faulty water level sensor. Or in other words, a pressure switch. You can also find it under the top cover. It comes off quite easily. It is held on the washing machine body with screws or latches. We check the integrity of the wires and their connection to the sensor. A tube fits from below to the pressure switch. It may be clogged. The simplest test for the functionality of the sensor after removing it is to blow into its tube. If you hear a click, the pressure switch is most likely working. Otherwise you will have to replace it with a new one. It is important not to mix up the wires when installing a new one.

Water does not drain.

Common causes and solutions: 1. Again about the banal - you need to make sure that the sewer pipe is not clogged. Maybe the car simply has nowhere to drain the water. Of course, this is possible for machines with a permanently connected drain. We also check the drain hose of the washing machine. It should not be bent or twisted. In principle, you can disconnect the hose from the sewer and check whether water comes out of it when draining? If it comes out, we clean the sewer. If not, check the hose for blockages. Problem still exists? Let's look further.

2. The drain filter is clogged. A simple, but most common reason for the lack of drainage. The filter is located at the bottom of the washing machine under the door or decorative panel. It is a screw plug screwed into the machine body using a standard right-hand thread. Accordingly, the filter is unscrewed counterclockwise. Don’t forget to place a tray under the washing machine to collect any leaking water. After removal, the filter is cleaned of contaminants. You will need to remove excess in the place where the filter was installed. Next, reverse the process and check the drain. Most often it helps.

3. The drain pump is blocked or faulty. A common problem with Ardo washing machines is the pump blocking due to foreign objects getting into it. Various coins, buttons and other objects left in the pockets of clothes being washed, getting inside the drain pump, prevent it from performing its functions. A symptom of blocking a working pump is that when the drain is turned on, the pump hums and tries to expel water, but cannot. Another option is that the pump has become completely unusable. In any case, it will have to be removed. In Ardo washing machines, it is very easy to access the drain pump through the bottom of the machine. They have no bottom or are covered with an easily removable plastic strip. It is enough to lay the car on its side and access is open. Before removing, you can check the functionality of the pump with a multimeter. Next, the clamp of the rubber pipe is loosened and it is separated from the pump. Same procedure for the drain hose. The power cords are disconnected. All that remains is to unscrew the screws that hold the pump in place and remove it. A working pump is disassembled. And foreign objects are removed from it. The faulty one is replaced with a new one.

4. Lack of drainage may be caused by improper operation of the pressure switch. It simply may not send a signal to the control module about the need to drain. We have already discussed what needs to be done with the water level sensor above.

The water does not heat up.

2. A rare but possible breakdown is a malfunction of the temperature sensor. It is checked by measuring resistance at room temperature and when heated with hot water. A non-working sensor is simply replaced.

3. You need to make sure that the contact group of the heating element relay on the control module is not “sticking”.

Extraneous noise when the drum rotates.

Control block

Video - Ardo repair instructions

Before you start repairing an Ardo automatic washing machine, you need to get acquainted with its structure. It is important not only to know the general structure, namely, where the main components and assemblies of this washing machine are located, but where its additional structural elements are located, and what their features are. Let's talk about all this.

Diagnostics

If you decide to repair the washing machine yourself, then before doing so you need to understand exactly what exactly is not working and what you need to pay attention to first. Before replacing a certain part, it is necessary to carry out diagnostics.

In this case, the best diagnosis would be a visual inspection. An obvious problem can be noticed even with a quick inspection.

Modern Ardo machines have self-diagnosis capabilities. When the automation detects the slightest malfunction in the program, the system displays a code corresponding to this malfunction on the display. If the owner of the machine sees this code in time and knows what it means and how to eliminate the identified malfunction, then he will be able to avoid serious damage in the future.