Any dishwasher user knows that the machine “knows how” to lock the door open. In this position it is convenient to load or unload dishes, leave the dishwasher to air, and clean the filters. Unfortunately, sometimes the door stops holding open. There are two types of problems possible:
- The door does not lock in the open position and falls . To avoid mechanical damage to the door when it falls to the floor, you have to hold it when opening.
- The dishwasher door closes on its own. This creates inconvenience when loading and unloading dishes: you need to constantly hold the door with one hand.
How is the door fixed and why does it fall?
Are you about to put dirty utensils into the bin, but its door tries to close? You have to hold it with one hand and put the plates in with the other, which is extremely inconvenient. What is the cause of the problem and what parts are responsible for fixing it?
- Tension cable.
- Door spring.
- Locking element.
- A loop.
When you press the door with your hand, the cable pulls back the spring, and the lock locks it in that position. As soon as you start closing the hopper, the opposite effect occurs. At the same time, closing is quick, and if you loosen your grip a little, the camera will close with a bang.
If the mechanism does not hold, the reason may be improper adjustment. The machines are supplied to stores with a non-adjustable locking device - so that it is convenient for you to install and hang the front panel on the dishwasher. After hanging, you need to fix the tensioning cable so that there is a reliable fixation when loading.
But if the lock is broken, how can you open and secure the door? Repair work will have to be carried out.
There is also the opposite problem that users complain about - the door began to fall or suddenly opens in the Bosch PMM. In such cases, the tension cable could break and the spring could stretch. If the problem is accompanied by squeaking, the cause is broken hinges.
Preparation for work
Before adjusting the door, it is worth preparing in advance. Proceed like this:
- disconnect the equipment from the network;
- remove the built-in device from the niche;
- disconnect communications - water inlet and drain hoses;
- prepare a set of tools - anything you have in your home workshop will do;
- Please read the instructions below to describe the progress of the work before setting up the machine yourself.
How to disconnect PMM from communications? It's simple:
- Disconnect the machine (Bosch, Kandy or another brand) from the electricity. Roll up the power cord and hang it on the mount pre-designed by the designers.
- Turn off the water supply valve to the dishwasher.
- Disconnect the water intake hose.
- Now you can begin to disconnect the drain hose - do not forget to install a plug at its end.
- Find the fasteners that secure the body of the machine in the niche of the furniture set.
- Arm yourself with a Phillips (plus) screwdriver and unscrew the screws that secure the case.
- Take the equipment out of the closet. The machine rarely weighs more than 40-50 kg, so you can handle it alone, but you should still act carefully.
- Cover the floor before installing equipment on it. Provide full access to the machine from all sides.
What tools do you need next? Stock up:
- Phillips screwdriver;
- hexagon;
- pliers;
- metal cable 1.5 mm.
You may not need the latter, so hold off on purchasing it until you're sure you really need it.
To avoid such problems, follow these recommendations:
- Do not overload the chamber with dishes.
- Do not place heavy objects on the open door.
- Do not slam the camera suddenly.
You can carry out the repair yourself. Buy replacement components in advance and follow the step-by-step instructions.
The problem with fixing the dishwasher door comes in two variations.
The first is when the door of a new dishwasher keeps closing, especially without dishes.
The second is when the dishwasher door constantly falls, in any position, that is, it does not hold.
Depending on the version of the problem, the solution will be different; more on this below.
Correction
If your dishwasher won't turn on, follow these steps:
- Inspect the device body for damage.
- Make sure the power is not out throughout the entire house.
- Check the integrity of the power cord.
- Reboot the system by unplugging the device from the power supply for 10-15 minutes.
If you find any irregularities, leave the dishwasher unplugged and call a technician. If, during a superficial diagnosis, you do not notice anything strange, it means that the breakdown occurred inside the device. Most modern dishwashers, when a malfunction occurs, display an error code on the display, the explanation of which can be found in the user manual.
Sometimes household appliances malfunction. According to one of them, the dishwasher does not turn on. In some cases, a simple reboot of the device solves the problem. To troubleshoot electronics and replace dishwasher parts, it is better to contact a professional.
Sources
- https://kuhnya.guru/tehnika/remont-posudomoechnoy-mashinyi
- https://posudomoiki.vyborkuhni.ru/neispravnosti/posudomoechnaya-mashina-ostanavlivaetsya
- https://bistriyservice.ru/neispravnosti/posudomoechnykh-mashin/ne-zapuskaet-mojku
- https://RemontCMA.ru/posudomoechnye-mashiny/neispravnosti-pmm/pochemu-posudomojka-ne-nabiraet-vodu-kak-ehto-ispravit/
- https://elektroznatok.ru/bytovaya-tehnika/remont-posudomoechnoj-mashiny
- https://cosmo-frost.ru/posudomoechnye-mashiny/neispravnosti/ne-vklyuchaetsya-posudomoechnaya-mashina-prichiny-i-resheniya/
- https://270076.ru/posudomoechnye-mashiny/posudomoecnaa-masina-ne-vklucaetsa/
- https://270076.ru/posudomoechnye-mashiny/cto-delat-esli-posudomoecnaa-masina-ne-moet/
- https://o-vode.net/rashod/bytovaya-tehnika/posudomoechnaya-mashina/nabiraet-i-ostanavlivaetsya
- https://RemontCMA.ru/posudomoechnye-mashiny/neispravnosti-pmm/prichiny-po-kotorym-ne-vklyuchaetsya-i-ne-rabotaet/
The door in the new dishwasher does not lock, it constantly closes
We bought a new dishwasher, everything is fine, except for one thing - the door does not lock and constantly tries to close. Is this a defect or not? We are most likely talking about the Bosch built-in dishwasher.
If the door constantly closes, then most likely you did not screw the facade on or adjust it. The fact is that built-in dishwashers have a built-in door position control. The door is always adjusted after installing the facade. The instructions say this in the section on door adjustment.
Door and front dimensions. Canopy and mount
The dimensions of the decorative panel depend on the size of the dishwasher. This can be narrow - 45-60 cm, full-size - from 60 cm or compact equipment - height 50-60 cm.
What to do if the dishwasher front is too long? You won't be able to cut it, as you will ruin the appearance of the set, because it is laminated on top and covered with decorative film.
What you will need for work:
- Screwdriver Set;
- roulette;
- fasteners;
- door handle.
Attached is a full-size template drawing, screws, self-adhesive tape, and fastenings. You can figure out how to secure the panel by following the instructions. For an experienced master this will take no more than 10-15 minutes.
The dishwasher door falls and doesn't stay in place at all.
If the door constantly falls and does not lock, then most likely the closers are broken or there is a problem with the cables. If you observe this problem, then you cannot do without repairs.
Closers are faulty
. Every Bosch dishwasher uses a pair of automatic door closers. This mechanism prevents the door from moving harshly, and accordingly protects it from damage.
If the closers are faulty, the door will constantly fall, since the locking mechanism will not be able to hold the door with fittings, the weight of which sometimes reaches 10 kg.
If you replace the closers and there are no more problems with the door, you can continue to use the dishwasher as usual.
The cables and the holder mechanism are faulty
. In addition to the closers, the dishwasher door has a plastic fastener with tension cables. These cables serve as a tension absorber, preventing the door from falling.
If one of the cables is stretched, the door will not hold. One wrong move, and if the door falls, the ears of the tray holder may break off. Then, in addition to the fact that you will have to change the pallet, you may also have to change the door closers.
If you begin to notice that the door moves too smoothly, then this is the first sign that there are problems with the holder mechanism and repair will soon be required.
Call a specialist to your home
You can call a technician to your home from our service center. Replace closers, change tension cables - any service at affordable prices.
Telephone call for the master -. Free home visit by a specialist is available for Moscow and the Moscow region.
List of some models of Bosch dishwashers that we repair
- Travel around Moscow and Moscow Region;
- Free travel around Moscow;
- Free travel outside the Moscow Ring Road *;
- Free diagnostics;
- You can bring your faulty equipment to us.
You can call or apply online for a discount;
- Specify the required time for repair;
- We'll take care of the rest!
- At home in Moscow and Moscow Region (Free visit of a specialist)
- Service center on Podolskaya street, 17 (Moscow)
- Service center on Bratislavskaya street, 31 building 1 (Moscow)
- Southern Administrative District
- SEAD
- South-Western Administrative District
- SZAO
- NEAD
- Company
- VAO
- Central Administrative District
- SAO
2005-2019 © Official website Boshremont.ru
www.boschremont.ru - 13 years of service to our clients. Bosch Service NSC LLC. User agreement, offer and privacy policy.
- SMS 24AW01R
- SMS 30E09 ME
- SMS 40D12
- SMS 40L08
- SMS 40L02
- SMS 40D08
- SMS 44GW00
- SMS 50E02
- SMS 50D62
- SMS 50E82
- SMS 53N12
- SMS 53N18
- SMS 68M52
- SMS 69M78
- SPI 50X95
- SPI 53M95
- SPI 50E65
- SPI 50E05
- SPI 50E65
- SPI 69T85
- SKS 41E11
- SKS 62E22
- SKS 62E88
- SKS 40E22
- SKS 51E22
- SKS 51E88
- SKS 50E32
- SKS 51E11
- SKS 40E01
- SKS 51E66
- SMV 40D00
- SMV 40D10
- SMV 40D20
- SMV 40E50
- SMV 40L00
- SMV 40D90
- SMV 47L10
- SMV 53L30
- SMV 53N20
- SMV 53L50
- SMV 53M70
- SMV 30D20
- SMV 30D30
- SMV 50E30
- SMV 50E10
- SMV 50M50
- SMV 58L60
- SMV 88TX50R
- SMV 88TX00R
- SMV 48M30
- SMV 51E30
- SMV 87TX00R
- SMV 87TX02E
- SMV 24AX02E
- SMV 53M40
- SMV 46KX00E
- SMV 65M30
- SMV 63N00
- SPS 40E12
- SPS 40E32
- SPS 40E42
- SPS 40E02
- SPS 40X92
- SPS 53E02
- SPS 53E06
- SPS 53M52
- SPS 53M58
- SPS 53E18
- SPS 53M88
- SPS 30E32
- SPS 30E22
- SPS 69T78
- SPS 69T82
- SPS 68M62
- SPS 58M12
- SPS 50E42
- SPV 40E60
- SPV 40M60
- SPV 40E30
- SPV 40E40
- SPV 410M20
- SPV 40E10
- SPV 30E00
- SPV 30E30
- SPV 30E40
- SPV 43M00
- SPV 43M20
- SPV 40X80
- SPV 40×90
- SPV 47e30
- SPV 47e80
- SPV 50E00
- SPV 50E70
- SPV 53M00
- SPV 53M90
- SPV 53M20
- SPV 58M50
- SPV 58M10
- SPV 58X00
- SPV 58M60
- SPV 58M40
- SPV 69T80
- SPV 69T69
- SPV 63M50
- SMI 88TS11R
- SMI 65M65
- SMI 88TS03
- SMI 68l05TR
- SMI 53L86
- SMI 25AS00E
- SMI 50D45EU
- SMI 65M65RU
- SMI 46GB01
- SMI 46AW04
- SMI 58N95
- SRV 55TO3
- SRV 33A13
- SRV 55T13
- SRV 46A63
This public offer Agreement, hereinafter referred to as the Agreement, defines the relationship between the administrator of the boschremont.ru domain, hereinafter referred to as the Administrator, on the one hand, and the visitor to the boschremont.ru website, hereinafter referred to as the Visitor, who accepted this offer to conclude an Agreement by carrying out actual actions on filling out an online form, application or calling the contact phone number indicated on the Site, or sending an email or application to other contact information indicated on the Site.
Clarifications of terms and definitions
1.1. Administrator’s website – website: https://www.boschremont.ru.
1.2. Site Service - navigation capabilities, receiving and sending information available for use on the Site by the Visitor.
Subject of the Agreement
2.1. The Administrator provides the Visitor with access to the Site Service, and the Visitor undertakes to use the Service in accordance with the terms of this Agreement.
2.2. The Administrator undertakes to accept information from the Visitor, including requests for repair work.
2.3. The Administrator undertakes to transfer information and requests for repair work received from the Visitor to potential contractors, subcontractors and other persons at the discretion of the Administrator.
2.4. The Administrator is not responsible for the consequences of the resulting relationship between the contractors and the Visitor, including, but not limited to, inadequate quality and content of service, repair and other work.
Other conditions
3.1. The content of the Site, one way or another capable of causing associative connections in the Visitor with officially registered trademarks, as well as brands, logos and other parts and elements of trademarks, is a random and unintentional coincidence.
3.2. Official copyright holders of trademarks who have noticed similar elements in the content of the Site have the right to contact the Site Administrator for clarification. If agreements are reached, controversial and random associative elements can be removed by the Administrator or modified to the point where the association with the registered trademark is objectively lost.
3.3. This Agreement establishes the complete absence of any relationship between the Site and the official representation of any brand, manufacturing or trading company registered in the manner prescribed by law. The Site is also not an official authorized dealer and/or service center of any registered brand or company, but provides only services for access to the service and functions of the Site, which boil down to the Visitor searching for the best option for receiving repair and maintenance services for his vehicle. he owns household, kitchen and other general purpose appliances.
3.4. Disputes arising between the Administrator and the Visitor may relate exclusively to functional, service and software errors in the structure of the Site and the incorrect operation of its program code. All disputes regarding the quality of repairs or service received by the Visitor are resolved exclusively with the person who provided these services to the Visitor.
3.5. The Parties are released from liability for complete or partial failure to fulfill obligations under the Agreement if the failure to fulfill obligations was the result of force majeure, namely: fire, flood, earthquake, strike, war, actions of government authorities or other circumstances beyond the control of the Parties.
Final provisions
4.1. This Agreement is a document regulating the relationship between the Administrator and the Visitor, as a result of which the Visitor, performing any actual action in the software shell of the Site, including reading content, filling out forms and fields, sending requests and messages and any other actions related to the use of functions and service capabilities The site automatically joins this Agreement in full.
4.2. A hyperlink to this Agreement is located on the main page of the Site, and is available in the form of a pop-up dialog box for easier viewing and reading.
4.3. The Visitor’s refusal to familiarize himself with the text of this Agreement in the presence of actual actions indicating the use of the functionality and services of the Site is considered void, and the Visitor is deemed to have agreed to all the terms of the Agreement on the grounds of actual use of the Site’s capabilities.
Confidentiality of the User's personal data
1.1. The Site Administration, acting reasonably and in good faith, believes that the User:
- indicates reliable information about himself to the extent necessary to use the Site, Products;
- has read the user agreement, agrees with them and assumes the rights and obligations specified therein.
1.2. The Site Administration does not verify the accuracy of the personal data provided by the User and does not have the ability to assess his legal capacity. The Site Administration assumes that the User provides reliable and sufficient personal data and keeps it up to date. The Site Administration is not responsible for the consequences of the User providing false or insufficient information.
1.3. These Rules apply only to information processed during the use of the Site and Products. The Site Administration does not control and is not responsible for the processing of information by third party sites, which the User can access via links available within the Site or Products.
Purposes of collecting and processing the User’s personal data
2.1. The Site Administration collects and stores only those personal data of the User that are necessary to provide full or partial functionality of the Site and Products, except in cases where the current legislation of the Russian Federation provides for mandatory storage of personal data for a period specified by law.
2.2. The Site Administration processes the User’s personal data in order to fulfill the agreement between the Site Administration and the User, the subject of which is the provision by the Site Administration to the User of access to use the Site, its functionality and Products.
2.3. The processing of the User's personal data is carried out without a time limit, in any legal way, including in personal data information systems using automation tools or without the use of such tools.
2.4. The User's personal data remains confidential, except in cases where the User voluntarily provides information about himself for general access to an unlimited number of persons. When using certain functions of the Site or Products, the User agrees that a certain part of his information about him becomes publicly available.
Transfer of personal data
3.1. Personal data of Users may be transferred to third parties to fulfill the agreement described in the user agreement (for example, for repairs by a contractor or subcontractor), except for cases expressly provided for by these Rules and the current legislation of the Russian Federation.
3.2. In order to fulfill the agreement between the User and the Site Administration and provide the User with access to use the functionality of the Site and Products, the Site Administration develops and implements new services, optimizes the quality of services, and improves the available functionality of the Site and Products. To ensure the implementation of these goals, the User agrees to the Site Administration, in compliance with the current legislation of the Russian Federation, collecting, storing, accumulating, systematizing, retrieving, comparing, using, filling (clarifying) their data.
Measures to protect personal data
4.1. The administration does not store personal data provided by the user via telephone. Those personal data that were provided by the user while filling out an online form or application are stored for exactly one hour, after which they are deleted permanently. The administration tries to use all the necessary modern means necessary to protect personal data.
4.2. To authorize access to the Site, Products, the use of a login (email address or mobile phone number) is not required. The administration provides the opportunity to use the site’s services without authorization.
Applicable Law and Dispute Resolution
All real disputes that have arisen between the Visitor and the Administrator relate only to the functionality and services of the site. Disputes that arise, the subject of which is poor-quality repairs or poorly provided services, or otherwise, are resolved exclusively between the Visitor and the Contractor (in the form of contractors or subcontractors). The administrator does not bear any responsibility for repairs. The user agrees with this, otherwise he immediately stops using the site’s services.
Loading and unloading dishes from the PMM chamber requires constant opening and closing of the door. The locking mechanism allows for locking in the open position for easy loading. But what if the dishwasher door does not lock? It is necessary to understand the locking mechanism and replace broken parts.
Removing blockages
In each of the above cases, in order to restore the functionality of the equipment, it is necessary to perform certain manipulations. We'll tell you how to do this further.
Cleaning the filter and checking the pump
In a dishwasher, the filter consists of two elements joined together. This design is located at the bottom of the working chamber. In most models, the main filter is framed by a filter mesh, which is also a filter that does not allow food waste to pass through.
The filter and filter mesh can be removed for cleaning
The inner “glass” is made of coarse mesh and is a coarse filter element. When water passes through this part, it hits the surface of an outer metal mesh with small cells - a fine filter element that finally cleans the liquid from food debris.
Coarse and fine filter elements
To clean the filters, follow these steps:
- Remove the dish baskets from the PMM.
- Unscrew the filter cap, which is located in the bottom of the chamber, next to the sprayer.
- Remove the two dirty filter cups from the niche.
- Rinse both filters thoroughly with running water. If necessary, use a toothbrush and any dishwashing detergent.
- Open the cover, which is located under the filters and gives access to the pump impeller. Carefully check that the impeller rotates freely. If something is slowing it down, you should remove the blockage using tweezers.
- After cleaning, return all parts to their places.
This is what a pump with an impeller looks like in many Bosch and Siemens PMM models
Sewer cleaning
In this case, the pump does not have time to remove all the water during its operation, since the sewer system is clogged. It is easy to localize the problem - disconnect the drainage hose from the sewer.
If dirty liquid leaks from it, try cleaning the part yourself, for which:
- Pour boiling water with dissolved pipeline cleaner into the drainage hole (it is possible that only the siphon is clogged).
- If there is no result, try cleaning the pipe with a steel cable (if you have one) or call a plumber.
Plumbing cable for cleaning sewer pipes
Checking the drain hose
It happens that cleaning the filters and checking the sewage system does not lead to the desired result - the water is still not pumped out. This may mean that the drain hose is clogged or pinched.
First, check to see if the hose is pinched by furniture or other objects. Feel it along its entire length (this manipulation helps remove the blockage). Once you are sure the hose is clean and not kinked, turn on the dishwasher to check the drain system. You can disconnect the drainage pipe from the sewer and place it in a large container to make sure it is working.
Disconnecting the drain hose from the sewer
How is the door fixed and why does it fall?
Are you about to put dirty utensils into the bin, but its door tries to close? You have to hold it with one hand and put the plates in with the other, which is extremely inconvenient. What is the cause of the problem and what parts are responsible for fixing it?
- Tension cable.
- Door spring.
- Locking element.
- A loop.
When you press the door with your hand, the cable pulls back the spring, and the lock locks it in that position. As soon as you start closing the hopper, the opposite effect occurs. At the same time, closing is quick, and if you loosen your grip a little, the camera will close with a bang.
If the mechanism does not hold, the reason may be improper adjustment. The machines are supplied to stores with a non-adjustable locking device - so that it is convenient for you to install and hang the front panel on the dishwasher. After hanging, you need to fix the tensioning cable so that there is a reliable fixation when loading.
But if the lock is broken, how can you open and secure the door? Repair work will have to be carried out.
There is also the opposite problem that users complain about - the door began to fall or suddenly opens in the Bosch PMM. In such cases, the tension cable could break and the spring could stretch. If the problem is accompanied by squeaking, the cause is broken hinges.
Purpose and features of the facade on the dishwasher
Before you begin installing the dishwasher front, you need to understand the purpose of this part. The front surface is a special decorative protective panel that is installed on the front of the dishwasher.
This product is made from various materials. However, most often when creating panels, the materials used in the manufacture of kitchen furniture are used. Externally, this part looks like an ordinary cabinet and therefore it is not easy to guess that there is a built-in dishwasher behind it.
Facade panels have a number of advantages that you should familiarize yourself with before using them. Among the advantages are the following:
- Improving the interior of the kitchen space. With the help of such a façade you can complement your kitchen design. Also, the use of such products simplifies the choice of dishwashers, since you do not have to select equipment that would fit the kitchen furniture.
- Dishwasher protection. The panel installed on the front of the machine reliably protects the equipment from mechanical damage and contamination. Most often, facades are installed to provide additional protection for household appliances.
- Soundproofing. It is known that during operation the dishwasher makes a lot of extraneous noise. After installing the facade panel, the equipment begins to work less noisily.
- Strength. Facade panels are highly durable and therefore difficult to damage. They are able to withstand even strong impacts on the surface.
Possible malfunctions of the dishwasher
When the service life of your equipment exceeds five years, you should think about simple wear and tear of parts. However, in the case when the equipment was purchased recently, then various malfunctions of the dishwasher can be caused by the following factors:
- Cheap models often feature low-quality parts;
- Severely clogged plates can cause filters to become clogged, after which water will not flow through. Before loading, you should thoroughly clean the dishes from food residues;
- Poor cleaning of dishes is possible due to the use of low-quality detergents;
- If the door is not closed tightly, you will notice how the dishwasher leaks. It also happens that the door closes poorly, and this indicates that it was installed incorrectly by the manufacturer;
- It makes sense to load dishes correctly: the upper compartment is intended for cups and plates, and large dishes are placed below.
In a situation where the above reasons do not apply, you should think about bad parts that have the potential to fail.
Door fixation
Dishwashing machines are designed in such a way that the door is always locked in any position. However, our issue is that there is no commit. Thus, to fill the washing machine with dirty dishes, you will need to hold the door with your knee so as not to break the dishes and carefully place them.
Often in such a case, the locking system of the door itself fails. However, it also happens that incorrect adjustment can lead to improper operation of the mechanism. This is due to the fact that built-in dishwashers are not supplied from the factory with the door already adjusted. This is necessary so that the master can install it without hindrance.
Do-it-yourself PMM door repair
Start small: check that the dishwasher body is installed correctly. Here are the main criteria for successful operation:
- The housing is located on a flat, hard surface.
- Each leg is in contact with the surface.
- The location is verified by the building level.
If the car is leaning forward a little, then the door may not close all the way. If necessary, adjust the legs of the PMM.
Checking and replacing the seal
There is a rubber cuff around the perimeter of the chamber. It covers the cracks, protecting equipment from leaks. If it becomes deformed, problems with tightness begin. Replacing an element is not difficult.
Sequence of work:
- Unplug the machine.
- Open the door.
- Remove the old seal. Just pull one end and it will come off.
- Install the new rubber into the groove. Ensure a snug fit.
- If the product is longer than usual, cut off the excess.
- Check if the hopper closes properly.
That's all, nothing complicated. Next, we’ll look at the PMM fasteners.
The mechanism that is responsible for fixation
To understand how to secure the dishwasher door, you need to look inside where it is attached. There you can see:
- Special spring;
- Cable;
- Fixing element for locking, which consists of plastic;
- Loop.
The loop begins to move when we fully open the machine door. To open it, you need to apply a certain force, which is quite enough for the spring to stretch as much as possible. The locking element secures the cable, so that the spring does not pull back, thereby keeping the doors open. They will remain in this position until you close them yourself. The blockage will immediately be released, which will lead to compression of the spring, which will tighten the cable. You must hold the door, because it will be attracted by a spring, so it will slam shut quickly.
Let's assume a situation where the locking element is broken. In such a case, you must constantly hold the door so that the tension of the spring does not cause it to return to the closed position. It will require constant force to keep it open while loading dishes. If the locking device fails, operation of the dishwasher door is not permissible. Otherwise, the mechanism will completely break down, which will ultimately lead to serious repairs.
Question for owners of a 45 cm IKEA dishwasher – IKEA dishwasher
see also
- Dishwasher - questions from the teapot. Sorry if this is the wrong category) I pleased myself with the dishwasher, but not everything turned out to be so simple, a number of questions arose. I took the built-in BOSCH SPV40X80RU. After reading reviews about the ease of installation, I refused the installer and decided my husband could handle it, but...
- DishwasherGirls, I read that the length of the hose at the dishwasher should not exceed 1 m. Is it so? Who has it longer? Otherwise, I can’t get less than 1.7. Thank you. If possible, with photos.
- dishwasherI am writing here because I am sure that many already have this miracle of technology. We were planning to buy a dishwasher and some questions arose: 1. should we take an open or built-in one (we will do repairs and change the furniture...
- questions about the dishwasherDD! Maybe off topic, excuse me. I have a question for dishwasher owners: tell me, if the dishwasher is freestanding, not built-in, is it possible to attach a front door to it, like on a kitchen unit?
- About the dishwasher I wanted to share my joy about purchasing a dishwasher. Today they brought my beauty))). Nothing foreshadowed such a good thing, but 3 weeks ago I began to specifically hysterical on the topic “I’m tired of washing dishes.” Husband nothing...
- question about color and dishwasher) Girls, hello everyone.. share your reviews and ideas) I have a kitchen of 6 meters.. the colors will be like this... the bottom is purple.. the top is white Tell me... should the countertop be white or dark?... the color of the floor is light walnut laminate... I’m thinking, if you don’t approach the kitchen, you’ll have to change it...to what? to...
- Question about the dishwasher! Girls, I just can’t decide which dishwasher to get, 60 cm or 45 cm. I’ve been thinking about ordering a kitchen for a month now. There are two of us now, we cook at home. The kitchen is not very large, 9.5 sq.m., i.e. if you take...
- Lower plinth and built-in dishwasher. Please tell me, is it possible to install the set plinth (or whatever it’s called) under the dishwasher? My husband assembles the set for the first time and connects everything, and something doesn’t work... when you open the dishwasher door, it falls out...
- Dishwasher - doubts. Good evening. I read the archive of posts about dishwashers, if anything
