You started the wash cycle, and when you came to pick up the laundry, you discovered that Bosch had not spun it. There may be an error on the display. We’ll look at what happened to your washing machine and what you can do yourself in this article.
Note! If the machine not only does not spin out the laundry, but there is also water in the tank, refer to our article “Why the Bosch washing machine does not drain water.”
Contents Rules of use Installation and connection instructions...
Page 2
- Image
- Text
Content
Terms of use
Instructions
for installation
and connection
General safety instructions.
Before the first wash………………………………………………………5
Preparing, sorting and loading laundry 6
Detergents and care products
for linen………………………………………………………8
Selecting programs…………………………………………… 8
Washing……………………………………………………………. 13
At the end of the program………………………………. 14
Additional functions……………………………15
Cleaning and care……………………………………………………………. 16
Help with minor problems
malfunctions…………………………………………………………….. 21
Customer service………………………………………………………… 24
Flow parameters……………………………………. 25
Transportation, installation and
connection……………………………………………………………. 26
How to start the wash?
When starting the washing machine, you first need to turn on the cold water supply. Then you need to connect the equipment to the electrical network. Using the selector, select the desired program.
The buttons on the control panel allow you to select an additional function if necessary. Next you need to click the “Start” button. At this moment the washing process should start. Now you just need to wait for the process to complete.
In some cases, it is necessary to stop the running program and change the washing mode.
To do this you need to do the following:
- The program selector must be set to the “zero” position.
- Wait a couple of seconds and select a new washing mode.
- Start the wash by pressing the appropriate button. The washing program will change and the laundry process will begin again.
It is important not only to choose the right washing mode, but also to pour the detergent into the correct compartment of the powder receptacle. To avoid mistakes at this stage, you need to know how the dispenser works.
The Bosch Maxx 4 powder receptacle contains only three sections:
- Compartment for air conditioner (in the middle);
- Section for main detergent (left). This compartment is also designed for bleach;
- Soaking section (right).
When washing without a soaking step, the washing powder should be poured only into the cell located on the left. When washing clothes with soaking, the powder must be added to the right cell. Air conditioning, as already mentioned, needs to be added to the middle section.
Loading laundry
Page 7
- Image
- Text
Loading laundry
And Explosive!
Things that were previously
treated with cleaning agents containing solvents, e.g.
stain remover or cleaning gasoline may cause an explosion after loading. Therefore, they should be rinsed by hand first.
Attention
Foreign objects caught in the machine drum can damage your laundry. Therefore, when
When loading laundry, make sure that no strangers get into the drum with it.
items.
□ Open the loading hatch door.
□ Distribute pre-sorted
wash the laundry evenly throughout the drum so that it lies loosely, small and large items interspersed.
□ Never overload the machine, as
this impairs washing results and leads to
to severe wrinkles in the laundry.
□ Close the loading hatch door.
Make sure that the laundry is not caught between the door and the rubber cuff.
Safety
Operating your washing machine safely begins with reading the instructions, which should be kept in a place where you can find them immediately if necessary. And it doesn’t matter whether it’s printed or electronic. So, safety precautions say the following:
- The machine can only be used at home when connected to a cold water supply for washing textiles.
- Children and pets are not allowed near the car.
- Do not touch the glass of the hatch door while the equipment is operating, it may be hot.
- Do not turn the machine on or off with wet hands.
- When disposing of the washer, cut off the power cord and break the door lock so that children cannot close it if they play with the appliance.
- Follow all connection and installation instructions to prevent water leakage, electric shock, fire or other accidents.
In case of violation of the listed requirements, the manufacturer is not responsible for preserving health and your property.
Installation Features
Before putting the washing machine into operation, remove the transport fastenings, which must be saved in case of subsequent transportation. The bolts are located at the back, there are 4 of them in total; to unscrew them you will need a SW 13 key. Insert plugs into the resulting holes.
The stability of the washing machine will depend on the installation location. The surface should be smooth and hard, no carpets or soft coverings, preferably a concrete or tiled floor. When installing on a plank floor or plinth, a water-repellent wooden board with a thickness of at least 30 mm is screwed to the floor, and the legs of the machine are secured using WMZ 2200 retaining tongues.
The Bosch Maxx 4 series washing machine can be installed under a solid countertop by installing a sheet metal cover instead of a top plastic cover.
The inlet hose of a washing machine can be connected only to a cold water supply in several ways:
- to a separate pipe;
- to the faucet in the bathroom;
- to the kitchen sink faucet.
In all cases, the end of the inlet hose is screwed to the 3/4 thread of the tee tap. The second slightly bent end is screwed to the machine, the main thing is not to forget to put rubber gaskets for a tight connection. Since the nuts on the hose are plastic, tighten them by hand without overtightening. Make sure that the water supply hose is not kinked or stretched.
TQI equipment
The model is equipped with the latest Traxxas TQI Top Qualifier equipment with the ability to install an optional Bluetooth module! Now connecting mobile devices iPhone, iPad or iPod Touch is possible via Bluetooth wireless channel! Features such as fine-tuning models, saving profiles, receiving telemetry data and transferring information between transmitters have become even more user-friendly - you are no longer limited by the placement of your mobile device on the transmitter handle and small screen sizes.
Care
In the instructions for the Bosch MAXX 4, the manufacturer notes that the device will last longer if it is properly cared for. It is also important to use it exclusively for its intended purpose.
The dispensers where washing powder and fabric softener are placed also need to be washed periodically, since plaque forms over time and the powder will not be completely washed out of the compartment. As a rule, the procedure must be repeated every four washes.
According to the instructions, Bosch MAXX 4 is not recommended for washing with detergents not intended for washing machines. For example, hand washing powders create a lot of foam. Also, do not use finely grated laundry soap - it can clog the powder receptacle.
Only strict compliance with the Bosch MAXX 4 instructions will allow you to appreciate all the advantages and high-quality assembly of equipment from the leading manufacturer of household appliances.
Details
Attention to every detail, the introduction of innovative solutions and a new level of technical equipment - this is the credo of X-Maxx. Sometimes, in order to create something truly unique, you need to throw away old stereotypes and plunge headlong into a new world. X-Maxx passed this test!
Modular chassis design | New wheels for 8S system | GTX aluminum shocks |
| Suspension maintenance on all-wheel drive models has always been considered a long and labor-intensive process. Now the front and rear parts are completely dismantled. When using a screwdriver, you will have access to all suspension parts for repairs and adjustments in a few minutes. | Updated wheels and tires with massive tread simply won’t notice any bumps. Add to this a modern design - and you will have complete superiority over other monster trucks on any surface! Challenge any off-road! | The GTX long-travel shock absorbers are brand new and are designed specifically for the X-MAXX. Aluminum housings and 5mm steel stems provide unprecedented reliability. The large oil volume ensures the most efficient heat dissipation. |
New shock absorber mounting strut | New motor mount with two cooling fans | Maximum deflection angles |
| The completely new triangular shock absorber mount is designed to withstand extreme loads in all directions! Plus, these racks make great, easy-to-carry handles. | A fundamentally new motor mounting system eliminates even the slightest play! You can adjust the gap in the gearbox using latches on the motor mount - this solution has never been used before! The ideal clearance set at the factory ensures long and trouble-free transmission service. And two fans will ensure the most efficient cooling of the motor. | Arms, steering knuckles, steering knuckle holders - all suspension components are designed to provide a combination of long suspension travel and maximum deflection angles. The result of the work of TRAXXAS engineers exceeds our wildest expectations! |
New steering servo | Rubber bumper inserts | Waterproof from the start |
| The new servo is designed specifically to provide the necessary force and instant response to turning the wheels of such a large model as the X-Maxx! | Rubber bumper inserts provide energy absorption during frontal impacts. The entire X-Maxx design is made as a single power element that can withstand loads in any direction. | Water resistance is what sets Traxxas models apart from others. In any weather, in any conditions, you can be absolutely calm about any of the model’s components. |
Reinforced steel differentials | New reinforced drives | Aluminum central shaft |
| New reinforced steel differential gears provide greater force transmission and longer service life. Silicone differential housing gaskets protect the mechanism from dirt and water. | Extreme power requires extreme solutions - the model is equipped with special reinforced drives that can withstand the torque of the updated power system, as well as increase the suspension travel and wheel steering angle. The differential cups, like on real cars, are now splined, eliminating the pins as the weak link in the system and guaranteeing precise and uncompromising power transfer. | A reinforced center shaft transmits torque to the front and rear differentials. For maximum reliability, durability and smooth power transmission, the drives are splined. |
Smart differential function | Cush Drive Clutch Kit | Bearings with silicone inserts |
| Another new key option is torque distribution using a special center differential. No matter what you do, no matter what surface you ride on, all 4 wheels of your X-Maxx will consistently receive the same power, excluding slipping! | TRAXXAS engineers have adapted the revolutionary Cush Drive clutch system from the XO-1 and reinforced it with a steel spur. This system allows you not to lose power due to “slip” at maximum speed, but to transfer it to the central differential for wild acceleration and maximum speed. | Silicone bearing inserts minimize friction and provide reliable protection against dirt and dust. TRAXXAS proprietary moisture protection technology makes it possible to operate the model in any weather! |
