Washing modes and times in a beko automatic washing machine

Beko washing machines successfully combine innovative technologies, safety, convenience and an affordable price tag. The range of products is truly impressive; even the most sophisticated buyer will not have any difficulty choosing household appliances to suit their needs. The washing modes in the Beko washing machine are easy to switch; the symbols do not cause the slightest difficulty. Of course, before you start using it, you should look at the instructions and review the main washing programs.

“Symptoms” of typical breakdowns

Before using a Beko washing machine, study its instructions, and before disassembling it, study its structure. If you entrust your washing machine to a specialist, there is no doubt that he will quickly find the cause of the problem and offer the optimal solution to the problem. High prices for services force home craftsmen to figure out on their own what’s broken in the machine? Many problems can be fixed without the help of specialists, especially if you have tools, instructions and a diagram of the device at hand. Almost all modifications can be repaired with your own hands - WKB 51001 M, WKB 61031 PTYA, WKB 61001 Y, etc.

Considering the prices for repair work, why not try to cope without the participation of specialists, especially if the washing machine is 10 years old and it’s no longer so scary if it breaks completely: it’s still time to update the “park”. Below are typical breakdowns that owners of Turkish washing machines encounter:

1. The water does not heat up to the value provided by the program or set by the user. Items are washed in cool water, regardless of the program. The opposite effect is also possible - overheating of water above the desired temperature.
2. The liquid slowly fills the washer. Or it doesn't flood at all.
3. The Beko washing machine does not start due to an uncovered hatch.
4. At the end of the cycle, the liquid is not drained. This condition may be accompanied by a strong hum.
5. The drum makes a loud noise as it rotates.
6. Programs and modes do not start, and the indicators all blink at the same time. Or the light is on, but the SMA does not start washing.
7. Pressing the start button does not start the machine, but the power cord is plugged into the outlet.
8. Beko washing machine models that have a display display error codes - H1, H2, H3, H4, H5, H6 and H7. SMA does not work in this case.

These are not all the “symptoms” of problems that occur with Veko machines - we have listed the most common ones. Let's look further at how to fix the most common breakdowns.

Running programs

The symbols on the control panel look more stylish, the icons take up less space, but users are often confused and cannot decide which mode the symbol corresponds to. To decrypt, you constantly need instructions for the machine. Moreover, the drawings are not standardized, and each manufacturer creates them at their own discretion. This is why it is so difficult to switch from a machine of one brand to a model of another brand.

As for Beko washing machines, their control panel is full of inscriptions. Perhaps because of this, the machine does not look so stylish and impressive, but the user does not get confused in the programs. However, you will have to find out the description of the modes, namely such parameters as: washing time, water heating temperature, spin speed. Before starting the “cycle”, you should understand the purpose of special programs.

It is important to select a washing mode based on the type of fabric and the intensity of contamination.

Let's present a description of the special. programs found on Beko machines.

The duration of the cycles is approximate, in fact the time may “shift” on different Beko models. The exact washing duration, as well as the water heating temperature and spin speed when choosing a specific program, should be found in the instructions for the washing machine.

Heating element (heating element) – from 1500 rubles*

The heating element in the washing machine is necessary to heat the water. Over time, the heating element becomes “overgrown” with scale, which consists of impurities from tap water, powder particles, lint from clothes and other debris. As the heating element becomes dirty, it loses its effectiveness. In an effort to heat the water to the required temperature, it works longer than expected. As a result, either the heating coil burns out or the housing itself burns out.

SIGNS

Beko washing machine does not heat water. In older models, the cycle takes place in cold water; in more modern models, the machine stops the program after attempting to heat the water. If the heating element breaks down on the housing, the SMA may knock out plugs or an RCD when turned on. The display shows code H2.

HOW TO FIX

The heating element needs to be replaced.

*Rates are only for the work of the master, a new heating element is paid separately.

The Veko washing machine is not working and some kind of fault code is displayed on the display? Contact RemBytTech. We will help! Call:

Or submit an online application.

Marking on eco-cotton items

How do you know what kind of cotton the item in your hands is made of? First of all, before purchasing, look for a tag on the product with a copy of the quality certificate and epidemiological conclusion:

• The inscription “Organic” indicates that at least 95% of raw materials of organic origin were used in the manufacture of this material.
• The inscription “Made with organic” means that the percentage of organic substances in the material is at least 70%.
• The European Oeko-test mark guarantees the safety of the garment and confirms that the product does not contain harmful chemicals.

The following textile products are required to be certified:

• Clothes for children: underwear and outerwear.
• Baby blankets.
• Hosiery.
• Gloves.
• Shawls.
• Hats.
• Medical dressings, cotton wool and other similar products made from cotton.
• Bed sheets.

The price of items made from eco-cotton is slightly higher than the cost of similar items made from regular cotton. This is explained by the higher initial cost of raw materials, as well as additional costs for the conclusions of the expert commission.

Important! Organic cotton production accounts for less than 0.1% of total cotton grown.

Checking the temperature sensor

If after checking it turns out that the heater is working, proceed to check the thermistor. This sensor is located under the top panel. Take it out and check it:

• Remove the screws to remove the top panel.
• Remove the powder container and dismantle the control panel - these elements prevent you from getting to the temperature sensor. When the sensor is accessible, disconnect the wires from it.
• Measure the resistance using a tester. Under normal conditions - 4.7 kOhm.

• Warm up the sensor - lower it into warm water, the resistance should decrease. If the resistance remains unchanged, the sensor is broken and will have to be replaced.
• The thermistor is mounted in the same way as it is dismantled - the steps are performed in reverse order.

Basic rules of use

Before you start using the appliance, carefully read the instructions on how to care for your washing machine. Be sure to take advantage of the recommendations and useful information.

Housewives are often interested in the question of how to properly care for home washing equipment. But first, let's consider proper care of the device before installation and while connecting the equipment.

During installation and connection

• Place the device away from heating devices and flammable materials, avoiding rooms with temperatures below 0C.
• Install the unit on a level, pit-free, hard floor that can support the unit. If this recommendation is not followed, the washing machine vibrates and makes noise, leading to malfunctions.
• Install the unit in a dry, oil-free, dust-free place. Avoid exposure to direct sunlight and water. Humidity may cause equipment to stop functioning.

During operation

1. If the water supply hose slips, turn off the power immediately.
2. Do not wash clothes made from materials for which the machine is not intended (bedding, mats, carpets).
3. If you are not using the washing machine, turn off the tap.
4. To ensure that the rubber seal is in good shape and not deformed, do not wash clothes stained with cream, oil, or lotion.
5. If the drum and walls are dirty, disconnect from the power supply and wipe with a soft, damp cloth. Otherwise, rubber and plastic will discolor, become rusty, parts will become deformed and break.
6. If the water supply has stopped, open the tap slowly the next time you supply water.
7. Place laundry in the drum so that it does not get caught in the door.
8. The clothes that you will wash should not contain foreign (sharp, hard) objects in your pockets.
9. Soften water with various additives. You can use Calgon or other special products. Hard water has a negative effect on the water heating element and contributes to unit malfunctions.
10. Clean the drain pump filter regularly.

Functional set

In order to use the washing machine to the limit of its capabilities, it is better to get acquainted with the offered functionality in addition to the modes. The presence of special options will significantly facilitate and secure the washing process, which cannot but please consumers. Thus, VEKO compares favorably with several “tricks”:

• removal of lint and wool, for which a special mode is provided with an increased number of cycles and rinses;
• locking the panel from children and accidental pressing;
• aqua-fusion or economical consumption of detergent with uniform use of powder throughout the entire washing process;
• aquawave, also known as imbalance control, designed to evenly distribute laundry along the walls of the tank without lumps or ligaments;
• auto-restart of the started cycle after a power surge or power outage in the house;
• a touch sensor that monitors the water level in the tank to prevent overflow;
• half load, allowing you to wash a small amount of laundry faster and more economically.

Beko washing machines are attractive because they support Silent Tech technology. The whole secret is in the special design of the housing walls, which reduces the vibration and noise that occurs during operation of the unit. This leads to additional “advantages”: reduced energy costs and increased service life of the machine due to smoothness and stability.

Washing powder dispenser, Speed ​​switch, Attention

Page 12

• Image
• Text

Washing powder dispenser.

washing.

b

. Division II. Washing

powder for main wash.

c.
Branch » <§&'. Softener. c1.Siphon.
Quick wash program This program reduces the washing time for lightly soiled laundry.
Use this program also for sewing synthetic and
cotton fabrics at temperatures below 60° C

Stop after rinsing.

If you want to leave your washed woolen or

synthetic products in the machine, you should press the “stop after” button

rinsing."
This will prevent wrinkles from forming. To end the program, you can either press the “stop after rinsing” button again,
or set the program selection knob to position P and thereby drain

water.

Rotation speed switch If you want to reduce the Rotation speed From 1000 06/MIN.
UP TO 500 05/MIN.
Click here. The softener compartment should be filled exactly to the mark.
If there is excess softener, it will mix with water (siphon-b.) and this compartment will need to be filled again. Thickened softener can clog the siphon. In this case, the softener should be diluted with water.
Attention! Do not use the half load cycle to wash woolen items.

Key Features

In order to make an objective comparison, you can consider the key characteristics:

The Italian company Indesit prefers to use classic style design. All models are similar to each other and differ in small external details. Almost always, washing machines from this company are painted white. The color range of household appliances from the Turkish manufacturer BEKO additionally includes gray and white.

In models from this manufacturer, the door attracts attention with its aesthetic and original appearance. The materials used in both cases are cheap plastic. This leads to the fact that it is inconvenient to press the buttons; if you press on the body, it starts to play

The color may begin to yellow or gray over time. This is less noticeable in cases where the buyer has chosen dark plastic. If we consider the build quality, then Indesit is in first place. In this case, the defect rate is low, and breakdowns rarely occur. However, both firms have the most typical problems in this area. On cars manufactured by Indesit, the handles that open the door often break. In BEKO products, motors break, drive belts break, and pressure switches malfunction. According to service centers, this company has a defect rate of 30%.

Eco cotton. What is this?

Based on the content of harmful components in their composition, textile products are divided into four groups:

• I – fabrics for making items for newborns and infants up to 36 months of age.
• II – material used for long-term contact with the skin.
• III – textiles that should have minimal contact with the skin or no points of contact with it at all.
• IV – fabrics for finishing. Used to create decorations on items of clothing.

Important! Eco cotton belongs to the first group of textiles. It is a material that does not have harmful substances in its composition.

For the production of threads, not ordinary, but bio-cotton is used. It differs from the usual version of raw materials in the methods of processing the plant:

• When planting, seeds are used that do not have any genetic changes.
• An ecologically clean area is chosen for sowing.
• When growing cotton, chemical fertilizers and pesticides, heavy metals and insecticides, as well as herbicides that help destroy excess vegetation are not used.
• Enrichment of the soil with useful minerals occurs only through alternating planting and the use of organic fertilizers.
• Loosening the soil and weeding is carried out only by hand.
• Ripe seeds are collected by hand.
• The bleaches used in the production of yarn and fabric do not contain chlorine.
• Finished clothing is processed only with natural dyes with low sulfur and metal content.

Important! Children's clothing for newborns made from this fabric has a natural brown or green color.

• Coloring occurs only in light colors. The design is applied only to the front side by printing.

All this makes organic cotton more durable and resistant to external factors, including ironing, washing and frequent wear.

Important! Eco cotton consistently withstands more than 100 washing cycles, and only after that it becomes sensitive to external influences on it, while ordinary cotton grown using chemicals begins to deteriorate after the 5th wash.

How to choose the most reliable washing machine?

Unfortunately, most people have very limited space in their apartment, so installing a full-fledged washing machine is not always possible.

In this regard, before going to the store, you should decide where it will be located, after which you can already choose products depending on the dimensions. External dimensions do not affect reliability at all.

The next important factor is the maximum usable volume of the drum - for a family of two or three people, a product with the largest load of about 5 kg is suitable, but if the family is larger, then preference should be given to more capacious products.

The material from which the tank is made directly affects the lifespan of the washing machine. They can be made of polymer materials - they weigh a little, operate absolutely silently, retain heat excellently, but they are very easy to damage.

Drums made of stainless steel are much more durable - they retain their original characteristics for a long time.

Linen can be loaded into the machine through the front door or vertical hatch. Each of these types has its own positive and negative aspects. In particular, when using a front-loading machine, you can see through the glass hatch what exactly is happening in the drum.

The parameters of the washing itself will also have to be considered.

Pay attention to the number of programs: today you can find products that have enormous capabilities in this regard

In addition to the standard modes, there are also programmable ones, which the user sets according to the parameters he needs. It is also advisable to take into account the amount of energy consumed per washing cycle (in other words, the efficiency of the model).

Many products have additional capabilities - various control systems, which include water quality sensors, child protection systems, and so on.

It is best if the unit is equipped with special protection against leaks such as Aqua Stop - it will prevent water from pouring out of the machine and can save the apartment and lower floors from flooding.

Features and duration of various modes

Experienced housewives know that they need to wash things in different ways. The washing method depends on the composition of the fabrics, the color of the products, and the degree of contamination. Choosing the wrong method can not clean, but hopelessly ruin the item, fixing stains and dirt, giving it a yellowish and worn-out appearance. All these requirements are programmed in the machine’s operating settings.

You need to implement your knowledge and recommendations from the manufacturer of the items by choosing the correct washing scheme on the device display.

You should not set too much temperature, time, or washing intensity, exhausting things with aggressive speeds or excess detergents. This will not make them cleaner, but will wear out faster. Let's look at what functions and modes the machines have, and how to properly wash different things.

Fast

This machine mode is selected to refresh lightly soiled items - the cycle is only 15-30 minutes. The water is heated to 30-40 °, the laundry is wrung out at maximum speed. Convenient to use for sportswear. Time savings are up to 40%, but the quality of washing is significantly lower. Re-washing may be required, resulting in increased time and cost.

Cotton 95 degrees

This function simulates boiling of cotton fabrics. Heating water this way takes time - the machine runs for 2 hours.

Cotton 60 degrees

In this mode, the machine can wash cotton and linen. The washing time is just under 2 hours. This is an ideal option for washing bed linen and soiled white cotton items.

Cotton 40 degrees

The machine washes automatically in this mode for an hour and a half. It is convenient to use this function for washing items made from natural fabrics that are not very dirty.

Help: in most cases, 40° is enough to completely remove all dirt. High temperatures are not required for modern detergents and fabrics.

Synthetics

This setting is used for washing items with any amount of synthetic impurities in the composition. Most products are made from mixed fabrics. This wash lasts, depending on the temperature, from one and a half to 1 hour 50 minutes.

Delicate

Gentle washing is used for delicate fabrics and complex outfits with decorative elements. With gentle mode, things wrinkle less and jewelry stays in place. Duration – no more than an hour, temperature – 30 °.

Silk fabrics are washed for 50-60 minutes, the drum rotates weakly, spinning at low speeds.

Wool

Woolen items should be washed only in this mode - the drum rotates slowly (36-80 revolutions) and swings slightly. A minimal amount of water is poured in just to wet the loaded woolen fabrics. Temperature – no higher than 40 °. The drum is loaded to 2/3 of the volume. Rinsing in this mode is long, with repeated addition of water, the laundry is wrung out weakly. Washing duration is an hour.

Manual

Hand washing can be used for items that are not recommended to be machine washed. The drum's movements are weak; it sways rather than rotates. Low temperature (30°), high water level is used. Spin is weak or absent. Duration - about an hour.

Self-diagnostic system database

Self-diagnosis helps to operate the VEKO washing machine competently and safely. The system regularly scans the device for possible problems and reports a malfunction via a digital display. The owner can only decipher the error code and fix the problem. The database is represented by a number of combinations.

• H1 – The temperature sensor is damaged. Repair involves testing the thermistor with a multimeter and measuring resistance.
• H2 – Fixing problems with the electric heater. Most likely, scale or voltage surges interfere with the operation of the heating element.
• H3 – Problems with the thermistor or failure in the control system. Accompanied by exceeding the set temperature and blinking of the first two lights.
• H4 – Problems with water pressure. The fill valve triac is probably faulty or the wiring is damaged.
• H5 – Draining is difficult. If there is a blockage, we clean the pump; if there are defects, we replace the pump.
• H6 – Short circuit of one of the triacs. There are several possible breakdowns: switch burnout due to current leakage, damage to the wiring of the unit, problems with the board or electric motor.
• H7 – Error in water intake. The reasons may be a faulty pressure switch, a broken UBL, a closed water tap, or a burnt-out control module.
• H11 – Stopped engine operation. A non-functioning tachogenerator, worn bearings, brushes, loose wiring or a burnt-out triac lead to a stop.

The signal sent by the system will allow you to narrow down the search for the trouble that has occurred. The main thing is to correctly decipher the code displayed on the display and fix the problem as soon as possible.

What to look for when buying a budget washing machine

Equipment manufacturer

Whatever one may say, a lot depends on the brand. If a company values ​​​​its reputation, then even in the budget segment it will try to produce high-quality devices. This is also true in the opposite direction, so the make of the car should be considered among the main criteria. For example, Miele, Bosch and Weissgauff are manufacturers from Germany, which allows us to be confident in their convenience, thoughtfulness and durability.

Energy consumption

Not all buyers pay attention to this parameter. But electricity bills directly depend on it

For simplicity, the equipment receives a letter designation that allows you to determine its energy consumption. The good news is that in the budget category today there are practically no models worse than class A. But it is better to buy devices with energy consumption of A+, A++ or A+++.

Washing and spinning clothes

Like the level of electricity consumption, the efficiency of these parameters is indicated in Latin letters. The best washing quality is provided by class A devices. When choosing equipment, you should rely only on such options. Spin, as a rule, is of class B or C. Only more expensive machines demonstrate better performance. But in practice, class A spin may even be redundant.

Choose the right mode

Each Beko model comes with detailed instructions in which you will read how to set the desired mode and how to set up your own program - with the settings you need. The user can select a ready-made sequence of actions with automatically specified conditions - temperature, washing time, etc., or can make adjustments. Taking any mode as a base, you can add the options the user needs.

Beko machines have a selector switch that selects the washing option. The temperature is set by turning another switch. The total cycle time will be the sum of the duration of all processes that are included in it.

Before installing options, be sure to look at the labels that come with almost every item - from T-shirts and panties to down jackets. There are icons on the labels that can be deciphered using special tables - if the graphics are not clear.

The correct choice of programs will keep your things intact and ensure they are washed with high quality. By choosing the optimal settings, you also save all types of resources used when washing in SMA.

Source

Advantages and disadvantages of Atlant CJSC products

Joint Stock Company Atlant (Belarus) was organized in 1993. The advantages of washing machines are reliability, since they are manufactured using high-quality imported parts.

The advantages include:

The devices are distinguished by their compactness. There is an Atlant washing machine with a depth of no more than 32 cm; there is always a place for this in a small apartment. The equipment comes with official operating and troubleshooting instructions.

Atlant machines do not have innovative options, for example, they do not have drying. The disadvantage is the weak spin. Some models drain water at class C level, which is considered a good indicator. The rest belong to class D - this is not the highest characteristic value.

Only commutator motors are used, hence the low cost. But they are inferior to inverter ones in efficiency, durability and performance characteristics. A number of Atlant machines belong to classes A and A+, so the owner will have to pay 10-40% more for electricity than users of class A++, A+++ equipment. There are various errors in the design, for example, when opening the hatch, a little water drips onto the floor.

Drain pump – from RUB 1,700*

The pump is responsible for draining water from the tank. It is a housing equipped with an impeller and a motor that drives it. As a rule, pump failure is associated with debris and foreign objects getting into it. They block the rotation of the impeller, which causes either the blades to break or the motor to burn out.

SIGNS

The Beko SMA does not drain water or drains it very slowly. If the pump motor malfunctions, the sounds of its operation cannot be heard. If the motor is running, but the water drains very slowly, the reason is that the impeller blades are blocked or broken. Error H5 may appear on the SMA Beko display.

HOW TO FIX

The technician takes out the pump and inspects it. When dirty, it cleans. If the blades break or the motor burns out, the part is completely replaced.

*Prices are only for the work of the master, the new pump is paid separately.

Functional set

In order to use the washing machine to the limit of its capabilities, it is better to get acquainted with the offered functionality in addition to the modes. The presence of special options will significantly facilitate and secure the washing process, which cannot but please consumers. Thus, VEKO compares favorably with several “tricks”:

• removal of lint and wool, for which a special mode is provided with an increased number of cycles and rinses;
• locking the panel from children and accidental pressing;
• aqua-fusion or economical consumption of detergent with uniform use of powder throughout the entire washing process;
• aquawave, also known as imbalance control, designed to evenly distribute laundry along the walls of the tank without lumps or ligaments;
• auto-restart of the started cycle after a power surge or power outage in the house;
• a touch sensor that monitors the water level in the tank to prevent overflow;
• half load, allowing you to wash a small amount of laundry faster and more economically.

Beko washing machines are attractive because they support Silent Tech technology. The whole secret is in the special design of the housing walls, which reduces the vibration and noise that occurs during operation of the unit. This leads to additional “advantages”: reduced energy costs and increased service life of the machine due to smoothness and stability.

What does a full cycle consist of?

The sequential execution of the usual stages - washing, rinsing and wringing out things - constitutes a full cycle of operation of the machine. The device allows you to regulate the specifics of these operations.

Wash

The choice of washing mode is determined by the following parameters:

• fabric structure;
• the presence of decorative elements on products;
• contamination (you can include soaking, boiling cotton fabrics).

The right choice will determine not only how well things are washed, but also possible damage to the laundry from the aggressive effects of temperature and high speeds.

Rinsing

When rinsing, detergents are washed out of fabrics. Many people prefer to run an additional rinse mode to thoroughly wash the laundry from powder.

Spin

Choosing the right spin is the key to easy and enjoyable ironing. Only cotton fabrics should be spun at high speeds. Linen, silk, and synthetics should not be wrung out too much so as not to damage the fabric and make ironing easier.

Front loading

How to set the program?

The user manual describes the algorithm for starting the desired washing mode. You can select a program with automatically set parameters (temperature, cycle duration, spin speed) or adjust the conditions at your discretion.

It is possible to take the basic mode as a basis and add the necessary options, change the water heating temperature, and the spin speed.

The washing program is selected using the selector knob. The temperature is set by turning the second switch, spin by pressing the key. Then the “Start” button is pressed. The duration of a cycle consists of the time of all processes included in it.

Interesting:

Source

What are the features of the renovation?

Models from Beko have design advantages that are especially useful when replacing bearings:

• The device is much easier to disassemble than most analogues from other brands.
• Usually you don't even have to take out the tank to replace the bearing.
• Simply remove the front of the tank to remove the drum. The back remains in place.
• It is necessary to remove the entire tank when the bearing is destroyed - when it is necessary to remove its remains.

What other features of disassembly:

To gain access to the front of the tank, remove the front panel. Next, unscrew the lower counterweight. Disconnect all tubes and wiring.

Advice. Before disconnecting the wires, fix the original position in the photo - this will help you later when you assemble the device.

The front of the tank is held in place by 12 clamps - all of which must be removed to access it. Now all that remains is to remove the back panel, remove the pulley mounted on the drum axle shaft, and then remove the drum itself. Please note that the bearings fit on the axle shaft with an interference fit, so it must be knocked out by carefully striking it with a rubberized hammer.

The screw connection holding the pulley on the drum shaft must not be removed.

Machine equipment

Using the Beko technique has become even more convenient due to several improvements. Among the first innovations is an LSD display that allows you to monitor temperature, spin speed, remaining time and many other indicators. The expanded volume of the hatch, combined with the overall compactness of the machine, also makes washing more comfortable. For example, with a depth of 35 cm, a load of 5 kg of laundry is expected, and with a depth of 45 cm – up to 7 kg. The powder receptacle has also been improved, with a special compartment for pouring liquid detergents.

It is impossible not to mention Hi-Tech heating elements with a revolutionary nickel coating. Compared to old-style heaters, it has many advantages. These include increased service life, smooth surface, accelerated heating, resistance to scale and corrosion.

Popular models

It’s appropriate to start describing Beko 5 kg washing machines with the WRS5512BWW model. It has an excellent protection option for basic wool fabrics. There is also a “particularly fast” program that allows you to wash a wide variety of items in a short time without loss of quality. In this mode, 2 kg of laundry is washed in approximately 14 minutes. The water temperature in the tank can range from 0 to 30 degrees. Therefore, real savings in time, money and detergent are achieved.

Thanks to the electronic system, the laundry is distributed as uniformly as possible. Therefore, the torsion speed reaches its maximum during spinning. The special nickel-plated heater of the Hi-Tech model will last twice as long as analogues from other manufacturers. There is a special “Shirts” program that allows you to successfully wash fabric when the water is heated to 40 degrees. The hull and hatch are painted in elegant white.

The dimensions of the device are 84x60x36.5 cm. It weighs 51 kilograms. It is possible to delay the start of the machine for 1-19 hours. There is a countdown and countdown until the end of the cycle. The system is designed for reliable electronic imbalance control.

Other parameters:

• energy consumption category A - 10%;
• spin speed up to 1000 rpm;
• normal water consumption during washing is 45 l;
• There is no washing program for children's clothes;
• stain removal is not provided;
• There is no night mode or HomeWiz option.

The washing machine model RGS585P2BSW operates almost silently. She has carefully developed programs for wool, silk and especially delicate types of fabrics. A reliable child protection option is provided. The S-shaped side walls provide a radical reduction in vibrations. In total, this model has 15 preinstalled programs.

You can set the spin speed:

• 1000;
• 800;
• 600;
• 400 rpm.

The total current consumption is 0.845 kW. The sound volume during washing is no more than 60 dB. There is a program for washing down items. There is also a program for washing jeans. You can simulate soaking and rinsing by hand.

The RGS584P2BSW is another slim washing machine from Beko with a 5kg load capacity. It is painted white, but the laundry hatch is silver. The dimensions of the device are 84x60x36.5 cm. The weight of the device is 51 kg. The spin speed varies from 200 to 800 rpm.

About the basic washing programs of Veko options

• 40'40° - a twofold reduction in washing time - 40 minutes, not 80, which is facilitated by additional revolutions of the Beko machine drum and a constant temperature of 40 degrees;
• Delicate washing mode – for items made of knitwear and viscose, implying smooth drum movements. The program protects the material from abrasion and the color from fading;
• for children's clothing, several washing and rinsing cycles are combined; the regime is also optimal for the things of those who suffer from allergic reactions;
• a special program for dark fabrics involves low temperature and low spin speed with a large volume of water to protect things from possible shedding; For maximum effect, it is recommended to use detergent products in liquid form;
• For cashmere and silk, the Beko machine has a hand wash cycle that uses less water. This blocks increased moisture absorption of fabric fibers and protects them from deformation and stretching;
• The mode for woolen products allows for the most gentle care for them, protecting them from pilling and matting;
• mode for goods with down and feather fillings - for options with a drum capacity of 9 kilograms or more. Along with washing things, feather mites and their metabolic products are eliminated;
• The Beko washing machine's self-cleaning program treats the hoses, drum and detergent trays at a temperature of 70 degrees, removing mold;
• The shirt washing mode helps in washing problem areas of products without damaging the material; drum speeds maintain balance at a temperature of no more than 40 degrees;
• fitness program - for processing sportswear made of cotton and synthetics at a temperature of 40 degrees;
• eco 20°C – for items made of cotton fabrics with slight dirt. Saves up to 80% of energy when compared to a standard cotton cycle, and liquid or gel laundry products are the optimal solution.

conclusions

Inexpensive washing machines are an excellent option for those who value, above all, the comfortable use of the device and good washing quality. Budget models are easy to use, have good energy efficiency and the most necessary work programs, without unnecessary frills and expensive content, everything is just something that you can definitely use every day.

Good spin

As I have repeatedly noted, inexpensive devices cannot boast of high-quality spin, usually its level is B-C class. In this case, two washing machines have a Class C spin – BEKO WKB61001U and Candy GC41051D. This is a very small figure, but better than the ATLANT 50Y88 with its D class and 800 rpm.

And again, ATLANT 50Y88 comes first here - only this unit is protected from power surges. Agree that this is a very necessary property of the machine, since electrical appliances often fly due to changing voltage in the network.

Support programs

Each Beko washing machine has additional options that are connected to the main process. These are “Pre-wash” or “Soak”, “Additional rinse”, “Drying”, etc. Auxiliary programs are necessary to achieve maximum effect when cleaning laundry.

The meaning of prewash is that the laundry first lies in a solution of water and powder. The washing machine drum sometimes spins a couple of revolutions, and then “freezes” in place again. Thanks to soaking, it is possible to soften difficult stains and ensure their complete removal during the main wash. The auxiliary mode lasts from 15 to 40 minutes, it all depends on the Beko machine model.