The washing machine does not spin: 5 reasons and repairs

The Ardo washing machine does not spin clothes, but does it wash? Don’t worry, washing machine users encounter this problem relatively often. Solving the problem is not always easy. But we can reassure you, in half the cases, the malfunction that caused such a problem can be fixed with your own hands, without the involvement of a qualified technician. We’ll talk about the reasons that led to the fact that the Ardo washing machine stopped spinning clothes and how to eliminate them in the article.

What to do?

Don't panic prematurely. First, make sure that the cause lies directly in the malfunction. Perhaps you turned off the spin yourself, and the machine is not able to complete the entire program. Check the management panel. There is a possibility that you have set an operating mode that does not involve spinning, or you have set a delicate wash. In this case, set the normal operating mode and adjust the speed.

Top-loading SMAs are able to respond to overload with things. In addition, there may not be enough laundry, an imbalance occurs, and the washing machine stops after several attempts to spin the drum. Simply open the loading door and remove excess laundry or distribute items throughout the drum. Remember that such problems are typical for older models, because modern washing equipment is equipped with a function that protects against imbalance.

Causes of malfunction

In most situations, the reasons why the Ardo washing machine does not spin clothes are quite trivial. And the question is not related to failure - the user often makes mistakes, causing spin failure. What is meant in this case?

The washing machine drum is overloaded with laundry, or there is an imbalance in it . By putting more laundry than normal or one large and heavy item into the washing machine, you run the risk that your Ardo washing equipment will freeze without starting to spin the laundry. A similar situation occurs when there are few things in the drum of the machine, or all of them are light;
The operating mode for the machine is not defined correctly. The latest Ardo household appliances have a large number of operating modes and functions, selected taking into account certain factors. If the work task is not set correctly, the spin mode may not work;
untimely maintenance of the laundry washing machine . Everyone knows that your washing machine needs to be maintained regularly. If you do not clean the garbage filter for a long time, it becomes clogged with dirt and creates problems for normal spinning. To avoid such a nuisance, in addition to periodically cleaning the filter, it is recommended to perform a similar procedure with the washing powder tray, drain and water intake hoses.

Inspect the filter, hoses and pipes for blockages, remove the pump and check its operation. Check whether the electric motor is working properly, check how the tachometer works. After this, diagnose the water level sensor. Complete the inspection with wiring, terminals and control board.

Pump or electric motor?

It is no secret that problems associated with the performance of the drain pump of the Ardo washing device can not only affect the spin cycle, but also disrupt other operating mode programs. And here the strange behavior of the equipment cannot absolutely indicate the pump, and there are reasons for this.

According to the design of the control system, the management module is required to notice this fact and stop the washing process by sending a signal corresponding to the code error. But this does not happen, since during the washing process we most often use programs that do not consume a large amount of water. This means that the draining process is still completed quickly. A different matter is represented by another working stage - rinsing. It consumes quite a lot of water, and a pump that is broken is not able to quickly pump it out to drain. Most of the liquid is drained, but the washing machine manages to freeze without starting the process of spinning the laundry.

If you are familiar with these faults, check the pump first. The algorithm of actions is as follows:

The tray for detergents is removed from the Ardo washing machine;
the device tilts to the left side;
the screws securing the pallet are unscrewed;
The pipe and sleeve of the drainage system are disconnected from the pump;
the pump is disassembled, cleaned of dirt, and the condition of its impeller is checked;
The resistance value is measured using a multimeter.

The problem is caused by faulty sensors

Other reasons why the electric motor stops working normally are associated with the tachometer. This small device, resembling a ring, is located on the motor. With its help, the number of engine revolutions is determined and controlled. If there is a breakdown in it, then the control module will not be able to influence the performance of the motor, which will entail certain failures of the specified program.

Checking the tachometer is determined with a multimeter. The resistance value is measured, and the electrical wiring suitable for the sensor and terminals is checked. The wiring has a thin cross-section, breaks or is easily damaged, and when this happens, the tachometer stops performing its functions.

In addition to this element, the sensor responsible for the water level in the Ardo washing machine may fail. They call it a pressure switch. In such a situation, the washing machine freezes immediately after rinsing, and the spinning process does not begin. To make sure that the problem lies precisely in the pressure switch, try to activate the spin process separately, no matter what washing program is set, and see how correctly the washing machine performs it. If everything happens normally, then we can confidently assume that the breakdown lies in the water control sensor.

Damage to the tachometer and engine

A tachometer is a device that is necessary to control the number of revolutions made by the drum of a washing machine. Its breakdown may be due to constant overload. This problem also occurs if the wiring in the car is damaged. If the Indesit or LG washing machine does not spin, then you should attach this mechanism and look

Attention should be paid to loosening the fastening. If the device does not wring things out, the sensor itself may be faulty

In this case, you will have to buy a new one.

Wear of the motor brushes also becomes a problem. It manifests itself in a decrease in the number of revolutions, which is why the washing machine does not spin. The reasons can only be found out after disassembling the device.

Why is this happening? A tachometer failure can be determined by the following signs:

sometimes the reason for stopping the operation of this element of the machine is the pressed button for turning on the laundry spinning mode;
You can also determine the operating condition of the tachometer by measuring the resistance at its contacts;
the absence of grounding may also indicate that a certain amount of charge getting onto the engine pulley can negatively affect its operation.

But what to do in such a situation? It is better to contact those who have more complete knowledge about the structure of the washing machine. Sometimes she does not spin clothes due to other breakdowns.

Some useful tips

Try to prevent the occurrence of malfunctions rather than bring the matter to repair work. To do this, it is proposed to follow some simple rules:

before loading laundry into the drum, check the contents of its pockets for foreign objects;
install the washing machine and connect it in accordance with the operating instructions;
Wash linen with decor in special bags;
load things in accordance with the established norm. Otherwise, the washing machine will be subject to rapid wear and tear and perform poor washing;
use a voltage stabilizer to protect household appliances from sudden breakdowns;
Clean the drain filter and washing powder tray regularly;
Leave the hatch door open after washing to prevent the appearance of mold and mildew.

Is your laundry machine working normally, but refuses to spin? Don’t worry, because users encounter this problem quite often, although sometimes it’s not easy to solve. But it should be noted that in fifty percent of cases, the breakdown that caused this problem is eliminated on its own, without the help of experienced craftsmen. Today we will figure out what to do when the Ardo washing machine does not spin clothes.

Checking the management module

If your washing machine still does not spin or drain water after carrying out diagnostic measures, check the electrical system and do not forget about the electronics. Start with a simple step - check the electrical wiring located inside the washing unit. Each wiring is carefully inspected and checked for breaks.

They happen quite rarely, but they do happen, and you will have to try to identify their presence. If everything is in order with the wiring, we recommend inviting an experienced specialist to help, since checking the electronic board yourself can result in serious financial losses. Please note that this part should not be replaced immediately. It is likely that the technician will check it and fix the problem.

What to do?

Causes of malfunction

The washing machine drum is overloaded with laundry, or there is an imbalance in it . By putting more laundry than normal or one large and heavy item into the washing machine, you run the risk that your Ardo washing equipment will freeze without starting to spin the laundry. A similar situation occurs when there are few things in the drum of the machine, or all of them are light;
The operating mode for the machine is not defined correctly. The latest Ardo household appliances have a large number of operating modes and functions, selected taking into account certain factors. If the work task is not set correctly, the spin mode may not work;
untimely maintenance of the laundry washing machine . Everyone knows that your washing machine needs to be maintained regularly. If you do not clean the garbage filter for a long time, it becomes clogged with dirt and creates problems for normal spinning. To avoid such a nuisance, in addition to periodically cleaning the filter, it is recommended to perform a similar procedure with the washing powder tray, drain and water intake hoses.

What problems can you fix yourself?

In some cases, you cannot do without the help of a professional repairman, but there are situations when interruptions in the operation of the washing machine are caused by minor problems that can be solved even without special knowledge of household appliances.

A washing program has been started that does not include a spin cycle.

If your washing machine is more or less modern, then it probably has several washing modes for different types of fabrics. Some fabrics require especially careful handling. As a rule, it is natural silk or wool.

The washing machine drum is unbalanced

In order for the washing machine drum to rotate normally at high speed (and this is precisely the speed required for spinning), it is necessary that the load be distributed evenly across it. If the laundry gets bunched up during the washing process, the drum cannot reach the required speed and spinning does not occur. The problem can be solved by forcefully ending the wash, removing the laundry, distributing it evenly and starting the spin cycle again.

There is a blockage in the sewer pipes

Sometimes a washing machine does not spin, not because of some problem in its mechanism, but for external reasons. One of these reasons is a clogged drain. In order for the spin mode to start, it is necessary that the drum of the washing machine is empty, that is, that the water has drained. But this is impossible if the sewer outlet is blocked due to a blockage inside the pipe. In this case, water remains in the drum and the spin cycle cannot start.

One of the drain elements is clogged

By forgetting to turn out the pockets of clothes before washing, we expose the washing machine to serious danger. Items forgotten in pockets - coins, paper napkins, tickets, matches, chewing gum and other similar small items - can cause serious damage. Most often, all this ends up in the drain system of the unit, thereby preventing its normal operation.

To determine that this is the problem, first of all, you should remove the drain filter. It is located in one of the bottom corners of the washing machine, behind a small door on the front panel. How to remove and clean this part is detailed in the user manual.

Another element of the drain system that can become clogged is the impeller. It is located directly behind the drain filter. You cannot pull it out, but you can examine it for foreign bodies using a flashlight.

We complete our inspection by checking the drain hose. If a blockage has formed in it, the hose needs to be thoroughly blown out, or even better, rinsed under a strong stream of water.

To learn how to clear a blockage, watch the video from the “Washing Machine Repair – Video” channel.

Pump or electric motor?

The problem is caused by faulty sensors

It is possible to access the pressure switch in the Ardo washing machine through the top panel of the housing. After removing the cover, you will see a round device made of plastic material, to the terminals of which electrical wires are connected. This is a sensor that monitors the liquid level. It is necessary to check it with a multimeter, blow out the tubes, and, if necessary, replace it with a new analogue.

Some useful tips

Try to prevent the occurrence of malfunctions rather than bring the matter to repair work. To do this, it is proposed to follow some simple rules:

before loading laundry into the drum, check the contents of its pockets for foreign objects;
install the washing machine and connect it in accordance with the operating instructions;
Wash linen with decor in special bags;
load things in accordance with the established norm. Otherwise, the washing machine will be subject to rapid wear and tear and perform poor washing;
use a voltage stabilizer to protect household appliances from sudden breakdowns;
Clean the drain filter and washing powder tray regularly;
Leave the hatch door open after washing to prevent the appearance of mold and mildew.

What to do if the spin cycle in the washing machine stops working?

If during program execution the machine has not completed the last cycle, you must:

Check the laundry in the drum, it may be bunched up. For this reason, the electronic module stopped the program execution. This often happens when washing bed linen, when everything collects in the duvet cover or pillowcase and the machine cannot distribute the contents evenly. It is worth taking the laundry out of the drum, loading it back individually and activating the “Spin + Rinse” or “Spin” function.
Check the explanation of the program in the instructions. Perhaps it simply does not provide for this mode. In this case, the spin can also be started separately.
Avoid overloading the drum. Models with electronic control are especially sensitive to this. In case of overload, they simply stop the washing process at any mode.
You can try to start the program again; the program may have crashed.

In all other cases, you will have to contact the service center for the help of a qualified technician. Since it is quite difficult for a person without experience to understand which component part has failed. In addition, this requires special equipment.

What caused the breakdown?

Most often, the Ardo washing machine cannot spin out clothes for the most trivial reason. And the point here is not a breakdown at all, it’s just that the user himself makes a mistake, as a result of which a similar problem arises. What user errors are we talking about?

Creating drum overload or imbalance. If you put too many items or one large, heavy item in the Ardo washing machine drum, the washing machine may freeze without spinning. The same thing can happen if there are too few items in the drum or they are too light.

To avoid such mistakes, you need to ensure that the washing drum is sufficiently loaded and the laundry inside is evenly distributed.

The washing mode was selected incorrectly. A modern Ardo brand washing machine has a huge number of washing programs and functions that need to be selected based on a number of factors. If the program was selected incorrectly, spinning problems may occur.
The Ardo washing machine was not maintained on time. It’s no secret that your washing machine needs to be looked after, and this needs to be done regularly. If the garbage filter is not cleaned for several years, it may well become clogged with various dirt, which will ultimately cause problems with spinning. To avoid this, you need to timely clean the washing machine filter and not only the filter, but also the powder tray, as well as the drain and inlet hoses.

However, not all reasons for such a breakdown are so trivial and easily eliminated. The user may have absolutely nothing to do with it, and then he will have to look for the breakdown that led to the above symptom.

After inspecting the filters, hoses and pipes for blockages, you need to remove the pump and check its functionality, you also need to check the serviceability of the engine.
Next we check the tachometer.
Then we get to the water level sensor and check it.
Finally, you can move on to the wires and terminals, and then the control board.

Correct operation

In order for household appliances to let you down as little as possible and not freeze at the most inopportune moment, you need to treat them very carefully and follow the following recommendations:

Check all pockets before washing - small parts can clog the filter.
Install a voltage regulation filter in your apartment. It changes frequently, and electronics are the first to suffer from this. Read about the rules for choosing an automatic washing machine here.
Powder that dissolves in water must be poured strictly according to the norm: excess will accumulate in the dispenser and clog the grate.
Do not overload the machine; the imbalance sensor will turn off the maximum speed.

Replacing electronic components is a very expensive “pleasure”; there are times when it is cheaper to buy new equipment than to replace a unit.

By following these tips, you will save yourself from unnecessary hassle and expenses from the family budget, and you will know what to do in each specific case of a washing machine failure.

Pump or motor?

Strictly speaking, malfunctions in the drain pump of the Ardo washing machine lead not only to problems with the spin cycle, but also to general disruptions in the execution of the washing program. In this case, the behavior of the washing machine may indicate precisely the pump, we will try to explain why.

The fact is that the pump does not always break completely. Often it simply doesn’t work well due to a foreign object getting on the impeller or for some other reason. This leads to the machine spending more time draining water than is programmed.

In theory, the control module should notice this and stop the wash, generating an error with the corresponding code. But this does not happen, because during washing, in most cases, we use programs that waste little water, which means that draining happens quite quickly in any case. The next stage of the program – rinsing – is a completely different matter. Here a lot of water is used and the pump, due to a breakdown, cannot pump it out quickly, the water is mostly drained, but the machine freezes without starting the spin cycle.

If the above description of the breakdown is familiar to you, deal with the pump first. You need to do the following.

Remove the powder drawer from the washing machine.
Tilt it on your left side.
Unscrew the screws holding the tray with a screwdriver.
Remove the pan.
Disconnect the pipe from the pump and unscrew the drain pump.
Disassemble it and clean it from dirt, check the impeller.
Check the resistance with a multimeter.

Sometimes the commutator motor of the Ardo washing machine cannot accelerate the drum to such a number of revolutions to start spinning clothes due to worn brushes. In such a situation, the brushes need to be checked immediately, and if the guess is confirmed, replace them with new ones immediately. How to change the motor brushes of a washing machine is described in the article of the same name.

Sensors are to blame

Other problems associated with poor engine performance arise from the tachometer - a small, ring-like device that is located on the engine. A tachometer is nothing more than a sensor that determines and controls engine speed. If it is faulty, then the electronic module simply will not be able to affect the operation of the motor, which in turn will lead to failures.

You can check the tachometer using a multimeter. We measure the resistance, not forgetting to check the wires going directly to the sensor and its terminals. The wires there are thin, they are easy to break or damage, and if this happens, the tachogenerator will not work either.

The tachometer cannot be repaired; it can only be replaced with a similar one.

In addition to the tachogenerator, the water level sensor, the so-called pressure switch, can also become depressed. In this case, the program may freeze just after the rinse cycle, which will result in the spin never starting. In this case, to make sure that the problem is in the pressure switch, you can run the spin cycle separately, regardless of any washing program, and see how correctly the machine performs it. If everything goes well, it means 97% that the water level sensor is faulty.

You can get to the pressure switch of the Ardo washing machine through the top cover of the case. Having removed it, you will immediately see a round plastic device on top, to which terminals and wires are connected - this is the water level sensor. We have illustrated this sensor in the picture below so that you will not have any problems finding it in the future. We check the pressure switch with a multimeter, blow out its tube, and if it is faulty, replace it.

It's all in the control module

If all of the above parts are in working order, but the Ardo washing machine still refuses to spin, the electrics or even the electronics may be to blame. Let's start checking with a simple one - the electrical wires located inside the washing machine. Each wire must be carefully inspected and, if possible, checked for breaks.

Breaks are infrequent, but they do happen, so you need to do everything to detect them. Didn't find the break? You will have to contact a qualified specialist, since getting into the control board without having experience working with electronics is more expensive for yourself. But at the same time, you should not thoughtlessly change this part without checking it first. The technician will determine the exact cause of the spin-related malfunction of the Ardo washing machine and fix the problem as quickly as possible.

In conclusion, we note that if the Ardo washing machine cannot spin out the laundry, and freezes without fully implementing the program, you urgently need to figure out what caused this trouble. To make your life easier, you can immediately contact a specialist, but you can try to save a little and find the reason yourself, and we will try to help you with this. Happy renovation!

The most common reasons why the washing machine does not spin

Using the wrong program

If, after the end of the program, the machine did not drain and fairly wet laundry was pulled out, the reason may be that a program was set where such a function is not used. This mode is for gentle washing of silk, wool and other delicate items.

Error in loading laundry and selecting program

If the instructions say that the program used for washing does not include a spin function, then do not worry. What to do in this case?

Note

You need to carefully study the instructions and set the required mode.

Another situation may arise when spinning was provided, and the machine finished working without spinning the laundry. You need to check: did the spin force deactivate during startup?

The listed facts are not breakdowns and arise due to the owner’s carelessness.

Overloading the washing machine

If the machine does not have a function that allows you to detect imbalance or overload, then problems may arise in the process of uneven distribution of laundry across the drum or a large amount of it.

To avoid this situation, you need to take out half of the laundry, distribute the rest evenly throughout the drum and start the spin function again.

Spin does not occur due to water in the tank

Before starting the spin program, the machine must drain the water from the tank and from the spun laundry. If this does not happen, you need to look for reasons for the refusal.

First you need to unscrew and clean the drain filter, and if there are foreign objects there, pull them out. You must remember to check the pockets of your items before washing.

Another reason for failure may be a clogged drain hose or drain pipe, which is attached from the tank to the pump. After removing the blockage, you need to check how the machine works again and whether it squeezes out.

Failure of the tachometer

If laundry is often overloaded during washing, then as a result the machine may operate at the load limit. In this case, failure of a device such as a tachometer, which is located on the shaft and controls the speed of the car, is guaranteed.

The tachometer may also become loose or its contacts and wiring may fail. The loose fastening must be tightened and the contacts and wiring checked, if necessary, cleaned and insulated. If the sensor fails, it is replaced with a new one.

Engine brush wear

The next reason for the breakdown of washing machines such as “Indesit”, “Samsung”, “Lg” may be wear on the motor brushes. For this reason, it may not work well, not developing the required number of revolutions to successfully drain the water and spin the laundry.

You need to disassemble the body of the machine, disconnect the wires and belt from the engine and check the tachometer and brushes, and “ring” the coils. If faulty parts are found, they must be replaced with new ones.

https://youtube.com/watch?v=Lpdq6pvJIno%3F

The control module has failed

One of the most unpleasant breakdowns of automatic washing machines is the failure of its control module, the so-called “brain”. He, in fact, manages all programs, receives signals from the sensor and, following them, “gives orders” to the performing elements.

An ignorant washing machine owner cannot fix such a breakdown. There is nothing left to do but contact a specialist or service center for repairs.

https://youtube.com/watch?v=AkEr5Sc0MP8%3F

https://youtube.com/watch?v=lM3UVTWpEso%3F

Presence of squeaking and knocking noises during spin cycles

The presence of a knock or squeak during washing indicates that small parts that have not been removed from the pockets have gotten into the area between the drum and the tank.

This can happen due to bearing wear. Squeaking sounds may come from the belt. The best option would be to disassemble the machine and see if the bearings are leaking.

Siphons for sinks and sinks: varieties

https://youtube.com/watch?v=pnVdpPyEL1Y%3F

https://youtube.com/watch?v=nfRG2Yb-n7c%3F

There is no need to be upset if, over time, some functions of the automatic washing machine do not work well. After all, modern models of machines such as “Samsung”, “Indesit”, “Lg” are perfectly repairable and after that they will serve their owners for quite a long time.