Why the washing machine does not turn on: how to fix it?

The convenience of automatic washing machines lies in the fact that all controls are located on the front control panel. Thus, the user can easily select the desired mode, which includes wash duration, temperature, and number of revolutions. Modes are set by sequentially pressing certain buttons.

If the buttons are broken, it becomes impossible to set the required mode, so washing becomes incomplete. If the on/off button or the “start” button of the machine is broken, it becomes impossible to start the wash. To troubleshoot a problem, you often have to disassemble the control panel of the washing machine, which requires certain skills and abilities. It is advisable to seek help from professionals in their field - our service center.

The button on the washing machine does not work: causes, consequences, repair

Buttons, keys, toggle switches, levers - all these are control located on the upper front panel of the unit.
When the switches are broken or the machine for some reason cannot be controlled using them, a malfunction has occurred.

What kind of malfunction this is, what its causes are and how it can be eliminated is not always possible for owners of washing equipment to find out on their own.

In some cases, if the buttons malfunction, the problem is solved in a couple of seconds, in others, a particularly complex repair is required.

Why do the buttons stop working?

Damage to control keys can manifest itself in different ways: buttons can become stuck, not respond to pressing, fall out, or stick. The most common reasons for button failure are the following:

1. When operating the device, the control key was pressed too hard;
2. The buttons are very dirty. The keys can become clogged with anything: washing powder, liquid and sticky conditioner, or some foreign substance spilled onto the key.
3. The control levers are worn out from constant or long-term use of the washing unit.

Note: if the start button on the washing machine does not work and the breakdown occurred literally immediately after purchase, the unit should be exchanged in the store for a better model. Because the breakdown of buttons in the first year of operation of the device is clear evidence of a manufacturing defect.

Buttons get stuck

Control panel malfunction

The control panel is one of the most vulnerable points of washing equipment. It is this part of their irreplaceable “helper” that owners touch most often.

Intense and frequent mechanical impact on the control panel buttons leads to their physical wear over time. And careless handling and improper care of the equipment can lead to severe contamination of the buttons, which also causes breakdowns.

If the switches of a washing machine that has not lasted even a year are faulty, this is a sign of a manufacturing defect. It is better to return such equipment under warranty.

Mechanical damage to the buttons (cracks, chips), their “sticking”, “falling out”, “jamming” is not the worst thing that can happen to a washing machine, but only if the problem is really and only in the buttons.

You shouldn’t wait until, due to broken keys, it becomes impossible to control the washing machine (especially in the case of the “Start” button - the machine stops turning on altogether)! This problem must be corrected as soon as possible.

The buttons on the panel of any washing unit are connected to the control module . When any of them (especially “Start”) or all at once is faulty, the following are likely:

• wiring damage;
• control module malfunction.

Such problems are dangerous both for the equipment itself and for its owners. For example, such a minor (seemingly!) nuisance as the “Start” button sticking can lead to a washing machine fire!

What to do if the washing machine does not turn on

It happens that household appliances from the most reliable manufacturers fail. Then you shouldn’t give up, it’s probably quite easy to carry out the repair yourself and without contacting a service center. Let's talk about what to do if a washing machine of a particular brand does not turn on, and why this happens.

Causes of problems and ways to solve them

The washing machine is new, it was installed by hand and after connecting all communications it does not turn on. Despite the fact that the joy from the purchase is spoiled and irritation increases, it can be eliminated quite quickly.

Let's consider the root causes according to the degree of difficulty of eliminating them:

• The machine shows no signs of life and does not respond to button presses. Check whether the plug of the unit is not inserted into the socket;
• The unit plug is inserted into the socket, but the control panel does not light up. The unit does not turn on. Check the presence of electricity in the house by inserting into this outlet a device that you are completely sure is working. Double-check the outlet by connecting a hair dryer to it. If it doesn't work, the outlet is broken and needs repair. It is also worth analyzing the performance of other outlets in the house. Perhaps the electricity was completely turned off or the wire to the bathroom was broken;
• Communications to the unit are connected incorrectly. Take the manufacturer's instructions and carefully study this document. It contains all the necessary information regarding the features of connecting, setting up and starting the unit. If you can’t figure out the situation on your own. Consult a qualified technician for assistance. He will connect the unit correctly, restoring its functionality;
• The control panel lights up, the program is selected, but the machine does not start. Why? The unit door is not closed tightly enough because you were afraid to put too much force into it. If you close the door properly and remove excessive amounts of laundry from the tub, the washing machine will start.

The simplest problems are often associated with the human factor, while complex technical breakdowns arise due to improper operation of the device.

Most likely technical faults

A washing machine from well-known brands is a high-quality appliance that rarely breaks down. For example, Samsung or Indesit. But even with such equipment, incidents happen. Technical breakdowns with such units can be of a very diverse nature. Therefore, in the case of each specific problem, it is worth considering methods for eliminating the problem separately.

This is interesting: The washing machine hums during the spin cycle

Let's further describe the most common problems with washing machines and outline the main measures to eliminate the identified problem. First, you need to remove the power plug from the socket so that the risk of electric shock during repair work will bypass you.

Breaks in the electrical circuit

The reason why Samsung does not turn on is often due to a break in the connecting circuits. Check the filter located under the top cover in the right corner. It is screwed to the body using a nut, so you may need the appropriate tool. There are three connectors connected to the filter, the cords from which can be broken due to vibration. You can do the repair work yourself, the main thing is to stock up on a soldering iron, pieces of wire, casing, electrical tape, and flange clamps.

Also recheck the electrical circuit. If the washing machine does not start working, voltage may not be supplied to it or it may be stopped by an open circuit inside the model. To analyze the presence of voltage, you can use a conventional tester. Analyze the network wire using this tool.

Problems may be caused by lack of electricity

Noise filter analysis

If the washing machine does not turn on, you need to figure out what caused the problem with the washing equipment. What to do in such a situation? This unit is responsible for eliminating radio frequency interference during operation of the washing unit. It will be necessary to study the performance of the FPS. It can be analyzed by “ringing” the wires with a special tester. This must be done sequentially: at the entrance and exit. If there are defects, this unit must be replaced.

Interference filter

Interference filter location

Start Button Analysis

When your washing machine won't start, don't panic. Perhaps the problem can be eliminated “at the embryonic stage,” thereby avoiding large material and time costs for maintenance at a service center.

Study carefully the unit's start button. The fact is that the voltage from the outlet is supplied to this element of the model or to the command apparatus or electronic module. If the first case is typical for your model, then it is worth ringing the wires suitable for it. If the ringing result is positive, you will need to check the button itself at the input and output (it must be pressed, and the washing machine itself is de-energized). If the button does not ring, replace it.

Dysfunction of the command apparatus of the electronic module

If previous measures showed the serviceability of the analyzed components, you need to think about whether you can cope with checking the electronic module or command apparatus. Dysfunction of the command apparatus or electronic module requires certain skills from the master, as well as experience in such matters. These are complex electrical devices that will be difficult to repair without electronics skills. If you go for it, then you can determine whether the command apparatus/electronic module is hollow by checking the wires of the electrical circuit and the hatch door for blocking.

This is interesting: How to open a locked washing machine if it is locked

Electronic module

Electrical Circuit Wire Tests

What caused the problem with household laundry equipment? In many cases, the dysfunction of washing units lies in problems with the wiring (internal and external wires break and fray during operation of the device). An analysis of the circuit's electrical wires will reveal their possible fallout from the mounting socket. Also, the wiring may simply fray due to frequent contact with the body of the washing machine, and so on.

A visual inspection is sufficient to determine where the defect appears. If there are kinks or other defects, the electrical wire will need to be replaced.

Reasons for broken buttons on a washing machine

One, several or all buttons on the control panel of a washing machine may not work for many reasons.

First you need to exclude the most banal and easily removable reasons:

1. problems : there is no electricity in the house; the socket to which the washing machine is connected is faulty; The plug or cord is damaged. These problems can be fixed by yourself or by a qualified electrician. If you call a VseRemont24 specialist to your home, he will quickly and efficiently replace the washing machine power cord with a similar new one. When the machine does not receive electrical power, not a single button works.
2. Problems with the water supply to the unit: there is no water in the water supply or its supply to the washing machine is cut off (the tap is closed or not fully open). In this case, the indicator lights on the control panel light up, but the machine cannot be controlled using the switches or buttons. Washing units equipped with a self-diagnosis system display an error code. You need to check the water supply and, having ensured it, start washing again.
3. Problems with cleanliness . If the control panel is too dirty, it needs to be cleaned. The instruction manual will tell you how to do this correctly. The main rule is that the machine must be turned off and de-energized.
4. The hatch door is not tightly closed or the hatch locking device (UBL) is broken. The machine does not start washing in order to protect itself and its owners from the “flood”. “Smart” units display an error code. If opening and closing the door again does not help resolve the problem, read “Repairing the washing machine lock” and invite a VseRemont24 technician to replace the UBL.

What do Remservice clients get?

1. Prompt response to calls. You won't have to wait long for the master. Our company has enough qualified specialists to provide any volume of repairs without any problems;
2. Elimination of almost any breakdown. We employ excellent craftsmen, and thanks to direct cooperation with suppliers of spare parts for equipment, they always have access to the necessary parts;
3. Guarantees. Repair service provides a 1-year warranty on its work. But, for more than 10 years of work, we practically never had to make repeated calls within the warranty period;
4. Discounts. Thanks to a streamlined work scheme and wholesale purchases of necessary spare parts from suppliers, we create affordable prices for services. We also provide our clients with all kinds of discounts.

Professional repair

A washing machine repairman first diagnoses the equipment and then makes complex repairs:

1. A mechanically damaged button or the entire control panel of the washing machine will be replaced with a new one. Start button in washing machines fails . The technician will test it with a multimeter in the on and off state to make sure there is a malfunction.
2. Repairs parts of the electrical circuit or replaces the entire wiring if the wires of the electrical circuit are damaged. With this problem, after turning on the machine, the indicator lights all light up and blink.
3. Repairs or replaces with a new faulty electronic module . When the control module is faulty, no indicator lights up.

Attention! It is not recommended to carry out complex repairs of the control panel and, especially, the electronic module yourself.

The washing machine is an electrical appliance. Careless and unprofessional actions can lead to fire !

Repairing such complex equipment as a washing machine must be done by a person who understands electrical engineering, the structure of washing machines, and has the necessary knowledge and experience, that is, a professional craftsman.

Malfunctions of internal wiring elements

If, after turning on, the washing machine immediately turns off or does not perform one or more functions, then it is highly likely that damage to the internal wiring or control unit can be diagnosed. Breakage or burnout of internal wires, as a rule, occurs in budget models of washing machines from little-known Chinese manufacturers. Determining which wire has failed is quite difficult. Moreover, they may not burn out, but simply fall out of their sockets. To determine connection locations, you need to be able to read diagrams. To identify a burnt wire, you must have skills in working with a tester. In any case, to identify damage to the internal wiring, it is necessary to completely disassemble the washing machine body.

Is it possible to use the device with sticky keys?

It all depends on which button is stuck. A non-working “Start” button will not allow the unit to start. If the water temperature setting key is broken, it will not be possible to select the optimal temperature cycle and will significantly reduce the quality of the wash. If the hatch key is stuck, access to the washer drum will be limited.

You will be able to operate the device only when a not very significant, low-functional button is stuck.

Important! Even if rarely used elements break down, experts recommend finding out what the reason is and fixing them.

Causes

It will not be possible to immediately determine why the washing machine stopped turning on. This requires an inspection of the equipment. In this case, attention should be paid to both the external elements of the device and the internal ones. For example, the main reasons for lack of performance are:

• Electrical problems. This includes malfunctions of machines, sockets, extension cords.
• The power cord or plug is deformed.
• Overheating of the FPS - network capacitor.
• Door lock malfunction.
• Overheating of the start button contacts.
• Also, the cause of the breakdown may be a failure of the control module.

Most masters call the first two reasons “childish”, and indeed, solving them will not be difficult. However, many housewives, falling into a panic, cannot soberly assess the situation; for them, such a malfunction is considered quite serious.

The following three reasons will require a thorough inspection and immediate repair. For example, as a result of a door malfunction, the indicators may not light up; they can be replaced fairly quickly.

And finally, the last reason is the most multifaceted and serious. It is worth considering each of the cases separately.

Minor damage

In a situation where Ardo refuses to turn on, it is necessary to inspect the equipment for possible damage or malfunctions. You need to start with the simplest reasons, which are located under points 1 and 2 above.

The washing machine remains in place during the inspection. First of all, if the Ardo machine refuses to turn on, you will need to perform the following steps.

• Check the outlet. To do this, you need to remove the plug from the socket and connect another electrical device to it. The verification method is quite simple. The socket is considered broken if the connected device refuses to turn on.
• If the outlet works, you need to check the extension cord where the cord of the Ardo machine goes. The verification method is the same as above.
• The next element of inspection will be the network cable. If damage to the insulating layer is detected, and traces of melting are also noticed, the cord must be replaced. Its further operation is impossible. Otherwise, this may cause the Ardo machine to stop turning on and working.
• Finally, if you cannot see any damage, you can check the wire using a multimeter. To do this, you must first set the device to the minimum resistance value, and then touch the probe to one of the teeth (usually the right one) of the fork. The standard resistance value for an Ardo machine is 2 ohms. Any deviation indicates that the plug needs to be replaced.

It is also worth noting that if defects are detected in the network cable, it is not recommended to repair it yourself. It is better to take the help of professionals who can assess the damage and also take all the necessary actions so that the Ardo machine starts turning on again. For example, workers can easily replace the wire insulation or change the plug.