Indesit washing machine does not turn on

Washing machines from the manufacturer Indesit are reliable. But they can also fail, causing a lot of trouble for the owner.

Sometimes a household appliance simply does not turn on. How to fix this failure depends on the type of failure. In some cases, it is very easy to eliminate it even on your own, without special knowledge.

In this article we will tell you why the Indesit washing machine does not turn on and how to fix the problem.

Calling a specialist: where to go and how much to pay?

If your washing machine malfunctions, you need to make a decision: fix the problem yourself or entrust this matter to a specialist. If you can’t cope with the failure, you can turn to professionals for help .
You can search for a company that repairs Indesit washing machines on the Internet by indicating the name of your city. The cost of work depends on the complexity of the breakdown, and can vary significantly by region.

It is advisable to seek help from companies that have been providing services on the market for a long time and value their reputation. The master who comes on call carries out repairs and gives a guarantee for his work .

But if you randomly select a specialist from an advertisement, there is a chance that you will fall for scammers and allow a low-skilled technician to approach your equipment. In this case, there will be no confidence that the work to eliminate the failure will be carried out efficiently.

On average, the price for repair work in the capital is within the following limits:

replacing a button on the control panel – from 1,000 rubles;
replacement of FPS – from 1,400 rubles;
replacement of the control unit – from 2,000 rubles, etc.

It should be taken into account that the cost of a new part is paid separately, as well as consumables.
A lot of important and useful information about repairing Indesit washing machines is presented in this section.

Diagnostics and repair of the lock on your own

To check the serviceability of the lock, it will need to be removed. Necessary:

Unplug the washing machine.
Open the hatch, bend the cuff, pry up the clamp and remove it.
Pull the cuff to the side to gain access to the lock.
Unscrew the fasteners securing the device.
Disconnect the wiring and pull out the UBL.

This method is suitable if the door opens. Otherwise, you need to open the base panel on the front of the washing machine and find the emergency cable for opening the hatch. It is usually yellow or red and is located near the filter. If the cable is missing, you need to unscrew the fasteners holding the top cover, remove it, and then put your hand between the body and the tank, find the lock latch by touch and unlock it. Now you can open the door and begin removing the UBL.

Now you can start checking the blocker using a multimeter. To determine where the neutral and common contacts are located, you will need a diagram of the lock. Hatch locking devices are produced by various companies that arrange the contacts in their own way. Without knowing the diagram, it is impossible to understand the contacts and diagnose the lock. You can find the diagram on the Internet.

At home, you can only check the thermoelement that heats the plates. To do this you need:

Set up the multimeter to measure resistance.
Find the neutral and phase contacts and install probes on them.
If a three-digit number appears on the tester display, this indicates that the blocker is working.
Now you need to move the probes to the neutral and common contacts.
If one or zero appears on the screen, the device is broken.

If the blocker is working properly, you need to inspect it for mechanical damage or manufacturing defects.

To replace, you need to purchase a new lock. This can be done at the manufacturer's service center, in a specialized store, or via the Internet. To avoid mistakes when purchasing a part, you need to tell the seller the make and model of the washing machine.

Installing the hatch lock is performed in the following order:

Connect the wiring to the UBL.
Place the lock inside the washing machine and insert it into the seat.
Screw in the fastener.
Return the cuff to its original place and install the clamp.

If after replacing the UBL the problems continue, this indicates a malfunction of the system board. It is not recommended to repair it yourself, because it can only worsen the situation. To diagnose and repair the breakdown, you should contact a service center or call a professional.

Some washing machine owners are interested in whether it is possible to bypass the lock and start washing. Theoretically, there is such a possibility, but in this case, everyone who has access to the technology will be at risk of electric shock. Also, if you open the unlocked door during washing, there is a risk of being scalded by hot water. It is for these reasons that it is recommended to carry out repairs and replace a part that is inexpensive, rather than searching for a way to bypass the blocking.

Control module

If after this the indicators do not light up, then the reason is different. Next you should try checking the control module of the Indesit WISLI washing machine. These are microcircuits, the “brains” of the device. You need to change something here only with some experience behind you. A video will help with this work.

Washing machine control module

By the way, the causes of other common Indesit malfunctions also lie in the control boards:

if all the lights on the panel blink;
if there are problems with spinning, etc.

When the capacitors on the microcircuit fail, the indicators usually begin to blink simultaneously. Replacing capacitors is the easiest way, but you will need good soldering iron skills and the right model. After replacement, as a rule, the light bulbs stop blinking.

If there are problems with spinning, they also look at the electronic module. This is not an easy task and requires knowledge and preparation. That is why, if the spin cycle does not work correctly, it is advisable to give the board to a specialist.

Device is not working? Why does the Indesit washing machine blink and not turn on? You need to look at the varistor - part of the microcircuit, a resistor necessary to protect the board from voltage surges.

Replacing it is quite simple with your own hands:

Remove the powder container. Underneath there are two screws that need to be unscrewed.
Remove the control panel.
Disassemble the unit and disconnect the board.
Find the varistors and check their resistance using a multimeter. Often the part turns black or falls out completely.
The burnt varistor is soldered off. It is replaced by another one with similar characteristics. The device should start working.

When using a soldering iron, you need to be careful not to damage the traces and other elements of the printed circuit board. If this happens, most likely, you will no longer be able to do without the help of a specialist.

You should also keep in mind:

Varistors are not the only possible malfunction that leads to the Indesit WISLI washing machine not turning on. This is just one of the simple and common ones.
In case of inept repair, the microcircuit can be permanently damaged beyond repair. Its cost is approximately 20% of the price of the entire Indesit washing machine.
Service centers usually do not repair the board, but install a new one. It’s easier, faster, and most importantly – more profitable. Private craftsmen often undertake repairs. Their repairs will be cheaper, but you should pay attention to their experience and qualifications.

How to find a part

Manufacturers can provide for the presence of fuses of different models in machine designs and install them in any location. It is possible that such a search will take a lot of time, so the best option would be to find an electrical diagram of a technical device.

The drawing will indicate the installation location. If this circuit is missing, then it is necessary, based on logical thinking, to determine where the fuse is located.

List of tips on where the part is located:

The part is located in the plug from the main wire required to connect to the power supply. In a wire located in the equipment housing, you should pay special attention to the base of this branch; in most cases, they are installed there. Installation is carried out in the power supply of the technical device. Locations on or near the board. Study the electrical circuit of a washing machine. So, during the production of washing units, the manufacturer ensures the safety of this expensive element. Still, you should initially look for the element inside the socket or in the wire

Still, you should initially look for the element inside the outlet or in the wire.

To carry out a thorough inspection, it is necessary to remove the top cover, that is, using a screwdriver, unscrew a pair of screws and push out the cover structure.

Next, you just need to consider whether there is a fuse in the equipment. There are cases in practice when fuses are simply not found, then most likely they are not in the technical device.

Reasons for failure of the Indesit washing machine

A situation in which the washing machine does not turn on at all may be due to a number of reasons:

The plug or socket is damaged.
Lack of electricity in the house.
Cord damage.
Control module failure.
Noise filter malfunction.
Broken "On" button etc.

Breakdowns can be caused by both long service life and improper operation of the washing machine. Do not allow uncontrolled moisture to enter the body of the washing machine, power surges, or careless handling of the wiring. Any negligence when operating a washing machine can ultimately cause major problems and costly repairs.

If washing programs do not start

If the indicators and display on the Indesit washing machine are on, all modes are working, but after pressing the start button the washing program does not start, this indicates a malfunction of the hatch lock (UBL).

In the hatches of Indesit washing machines, in addition to the usual lock, an electronic lock is installed. Its operation is indicated by a click after the door is closed. If it does not fire, the system board does not receive a lockout notification and does not allow the wash to start. The “Lock” indicator indicates a malfunction; the other lights will not light up. The program selected on the washing machine will only turn on after the door is locked.

To check the UBL, you need:

Open the hatch.
Bend the seal and remove the hatch cuff clamp.
Thread the cuff into the tank.
Unscrew the retaining screws.
Get the lock.
Disconnect the wires.

Next, you should check the lock with a multimeter. If it is broken, you need to purchase and install a new one.

If the lock works, but the set washing mode does not turn on, this may indicate a faulty pressure switch, pump, water inlet valve, or clogged communications. It is necessary to check all the listed components, replace the faulty sensor, valve or pump, and remove blockages.

There is an indication

If, when you turn on the network and select a program, lights or symbols flash on the display, then in this case you need to figure out what the machine is not doing. First of all, pay attention to the door lock.

UBL

If the hatch opens freely during startup, the reason may be the following:

UBL is faulty;

wiring burned out;

The control module is damaged.

A mechanical hatch locking device is checked using a specific method. This will be covered in another article. Pulse UBL can be diagnosed using an oscilloscope. We replace the faulty lock with a new one.

Hatch locking device

We check all wiring with a multimeter and repair damaged areas.

The module must be replaced and repaired by a good electronics engineer.

If the hatch is locked

If the hatch is locked and the wash does not start, then the following reasons are possible:

the pressure switch is faulty or clogged;

the pump is damaged;

Fill valves do not work or are clogged.

If the level sensor is broken, the machine “thinks” that the tank is full and does not start washing. To solve the problem, it is necessary to replace the pressure switch. A similar situation may occur due to a clogged sensor tube. After cleaning, the machine will start working.

Before adding water, the module checks the serviceability of the pump. If it burns out, the wash cycle will not start. This is the logic behind the work. We replace the pump with a similar one.

The fill valves are burnt out, so the machine cannot start washing due to lack of water. We replace them with new ones, and also check the mesh for possible blockages.

Start button

Another reason may be that the device's start button is faulty. As a result, it does not turn on. Often such a breakdown occurs in older models of the Indesit washing machine, released about 15 years ago. Due to their features, if the button fails, everything else does not work.

The following actions are performed:

the control module is removed according to the scheme discussed above;
the resistance on the button is determined, and it must be on;
If this is the case, a new one is installed.

If after all the above checks the machine still does not turn on, the reason is not common or something was done incorrectly. Then it is better to call a specialist.

Causes of level sensor failures

Sometimes the level sensors on washing machines break down. These elements fail due to malfunctions of the module. The breakdown may also be caused by network overload. Level sensors cannot be repaired, but they can be replaced. For this purpose, it is necessary to ensure that the elements are broken. To do this, remove the lid from the washing machine and inspect the drum. The level sensors are located under the plate and are connected to it through contacts. If the tester shows a zero value, then the device is broken. It needs to be changed.

Fuse threshold

From the above, it is clear that the fuse in the car is destroyed if the rated electricity value is exceeded. The fuse part overheats and burns out.

The rated current of the fuse is calculated using the formula: Inom=Pmax/U.

Inom is the nominal current value, which is measured in Amperes;
Pmax is the maximum possible load that a particular device can handle. Power is indicated on devices and measured in Watts;
U is the network voltage level. This indicator is measured in Volts. The voltage level in the car network is 12 Volts.

The lights are on

This situation is also possible. The indicator lights up or blinks, but the machine does not start in any mode. On older models with a command device, the knob turns continuously.

Are you unplugging your washing machine?

Oh yes! No

Crash

First of all, try resetting the program. The machine may have frozen or there has been a power failure. Different brands and models have different reset mechanisms. You must read the instructions. Try unplugging for a few minutes.

On older Indesit models, to reset, do the following:

put the switch on the point;
launch;
wait 3-5 seconds - the lights should blink several times;
transfer to the washing program;
turn it on.

Expert opinion

I work in the household appliance repair industry. Extensive experience in restoring washing machines and dishwashers.

Ask a Question

It is very difficult to reset an error in Bosch cars. Different models have their own algorithms.

Error code

On machines without a display, indicators indicate an error code that corresponds to a specific malfunction. It is deciphered using special correspondence tables. For Samsung SMA, the error values can be found here.

If any difficulties arise, it is better to contact a repair specialist.

A leak

Quite often, the reason for the strange behavior of the machine is an electrical leakage to the body. First of all, it occurs on the heating element or motor, but it is necessary to check all elements of the washing machine. To do this, you need a high-quality tester with a high “resistance” limit - 40 MOhm.

Control module

Module

The lights may light or blink due to the module. If the combinations do not match your machine's fault code and there is no leak, then the control board most likely needs to be repaired or replaced.

As you can see, there are trivial reasons why the washing machine does not turn on and which you can fix yourself. But at the same time, a number of breakdowns cannot be eliminated without an experienced specialist from the service center.

Fuse search algorithm

Before you start looking for a fuse, it is better to find out in which country Bosch was assembled. If its “homeland” is Europe, in particular Germany, then there is no need to worry about “insurance”. The production and sale of washing equipment without safety elements is prohibited by law here. Therefore, an almost 100% guarantee is given that the machine is completely protected from current surges.

In Russia, Belarus, Kazakhstan, Armenia and the CIS countries, the rules are not so strict. Equipment manufactured before 2000 can boast a fuse, but more modern machines do not always. It is better to make sure that the equipment is fully equipped in advance.

The fuse is located according to the following algorithm:

find the instructions for the machine and study its electrical diagram;
look into the base of the power wire, where it “joins” the body of the washing machine from the inside;
remove the control board by removing the dashboard and look for the fuse at the input (for example, here it is located on the Bosch WLL 2426SOE);
inspect the inside of the plug, where the fuse is also often “hidden”.

It is not easy to identify a fuse - it is a small part of various designs and types. If you have problems finding it, it is better to turn to professionals.

Interference filter and network cable

The Indesit WISLI washing machine still won't turn on? Next you should look at the power cord of the Indesit washing machine and the plug, as well as the interference filter.

You will have to remove the network connector and the filter at the same time, since they are connected.

To do this you need:

Disconnect everything unnecessary from communications.
Turn the Indesit washing machine.
Remove the screws and then the cover.
At the top left is the capacitor. It needs to be removed from the mount.
At the base of the case there is also a mount that secures the cable. It needs to be disconnected.
After the previous manipulations, the network connector with the filter can be easily pulled out.

Interference filter in a washing machine

Next, you should disconnect the filter and check the power cord. This is done by ringing with a multimeter. If a breakdown is found, the entire wire must be replaced. It is not recommended to repair the old one or replace the cores in it.

Interference filter

After this, the interference filter rings. The probes are installed on the legs of its capacitor. If everything is normal, the resistance is additionally checked. If the value is “0” or “1”, the cause is the capacitor and must be replaced.

How to remove the heating element?

In three steps:

We unscrew the nut located in the middle of the flange and drive it to the end of the thread. We do not remove the nut from the thread.

We hit the nut with a hammer, pushing the threaded part until the nut stops against the flange. By doing this we move the second (spacer) flange and release the elastic band of the heating element from expanding.

We pull the heating element outward in any convenient way. This is, as a rule, not an easy procedure, because the heating element is at least overgrown with scale and “stuck” to the fixing bracket (inside the tank), and at most it exploded or collapsed in some other way and now resists removal “with all its might”

In general, good luck to you and be careful in this really difficult matter. And don't forget to wear work gloves!

Is the heating element removed?

Now you are faced with the task of choosing a new one?

Indesit washing machine does not turn on

Sometimes household appliances that worked normally just yesterday malfunction. This is especially unpleasant when you have planned a huge wash, and the Indesit machine simply does not start. In this case, you shouldn’t worry too much and immediately send your home “helper” to the landfill. Often, most of the malfunctions that cause it to stop responding to your commands can be quickly fixed, and on your own.

Indesit washing machine does not turn on: how to return the equipment to working order?

So, before calling a specialist, you can carry out some simple diagnostics yourself, namely:

Check to see if the equipment is connected to power. If the plug is connected, but the machine continues to not respond to being turned on, then you need to make sure that there is current in the outlet at all. Strong surges in the electrical network often cut off power to sockets. At the same time, changes can damage not all sockets in the house, but only some of them. Therefore, to check the serviceability of the outlet to which the machine is connected, connect a hair dryer or other equipment to it.
Make sure the plug is working properly and check that the cord is not damaged. In cases where everything is normal with the electrical network, the problem lies in the washing machine. Therefore, first inspect the plug and cord. If there are visible traces of burning on them, or you smell the smell of melted plastic, then there is no need to try to turn on the unit again. At the very least, it is dangerous.

If self-diagnosis does not reveal the reasons for the malfunction, then, most likely, some of the “internals” of the equipment are broken.

When should you contact a specialist?

Of course, an expert will immediately determine which of the breakdowns led to the Indesit washing machine not turning on. But you yourself can recognize the signs of defects that have appeared and understand what problems happened to the machine. So, the unit may not turn on if:

The hatch does not lock normally. In this case, the washing simply will not start, and the reason for this is a broken locking device. It is necessary in order to protect equipment owners from the “flood”. If such damage occurs, the locking device must be replaced.
When I try to turn it on, none of the indicators light up. Most likely, the power button is broken and needs to be replaced. In addition, such a symptom may indicate a malfunction of the control element or interference filter.
If all the indicators light up or flash all at once, and the machine continues to not start, then you should look for damage in the internal wires.

Troubleshooting: where to start?

When starting to troubleshoot a failure, it is better to proceed from diagnosing the more frequent and simpler problems according to statistics, gradually moving on to more complex ones.

No electricity supply

If the Indesit washing machine does not respond to the power button, then you need to check if there is a power supply .

It may not even be in the entire house. If electricity is supplied to the washing machine via a separate line, this should be checked.

It is easy to verify the presence or absence of electricity - just turn on the light in the room or insert some electrical appliance into the socket intended for the washing machine and turn it on. Even a table lamp is suitable for the experiment .

You should also check whether the plug fits well into the socket and whether the contact necessary for operation is provided. If the plug is loose or the socket has visible scorched spots, repair is required.

If you have specialized knowledge, you can carry it out yourself ; if you don’t have it, you can resort to the help of an electrician. Work with electrical communications is carried out with no power and in compliance with safety precautions.

Power cord problem

If installed and used correctly, the power cord is rarely damaged. But it is necessary to check it for external defects.

Possible problems:

crushing by furniture or other objects;
bend;
damage due to frequent bending and straightening of the wire;
damage by pets, etc.

If the wire is defective, it must be repaired or replaced with a new one in case of irreparable damage.

Check wiring

A problem with the washing machine's power supply may be indicated by erratic blinking of the indicators. The reason for this may be bad contacts, loose connectors, etc.

Most often, the problem appears during long-term use and is caused by wear and vibration during operation. Inspecting all contacts and nodes with electrical connections will help correct the situation.

The machine does not respond at all when turned on

If you connected the washing machine to the network and pressed the power button, but the equipment did not respond in any way, there may be a loss of electricity in the outlet. Check if there is light in the house and if other electrical appliances are working. If everything is fine with electricity, you need to consider other common reasons why the machine may not turn on:

The circuit breaker has been knocked out. Perhaps moisture got into the outlet or a short circuit occurred for other reasons. Check whether the circuit breaker that supplies power to the washing machine is turned on. If disabled, try turning it back on. Does the machine still kick out? Then you need to identify the cause of the short circuit.
The residual current device (RCD) tripped and turned off the electricity. Perhaps there was a current leak on the body of the machine, the RCD failed or reacted by turning off due to poor-quality wiring.
The socket is broken. To avoid this breakdown, you should check the functionality of the power socket using an indicator screwdriver or a multimeter. The easiest way is to plug another electrical appliance into this outlet. If it works properly, then the cause of the breakdown lies in something else.

If the circuit breaker, RCD and socket are working properly, you need to consider other possible causes of the problem.

If the machine does not start at all and the indicators do not light up, the power cord or extension cord may be faulty. In the first case, it is worth checking the wire that directly connects the machine to the outlet for mechanical loads. Carefully inspect the outside of the wire - it may be bent or damaged. The best way to check the serviceability of the cord from the inside is to test it with a multimeter.

A multimeter is a multifunctional device for measuring resistance, voltage and current. You can purchase it at electrical stores. The machine may not turn on due to a faulty extension cord. Try connecting the washing machine directly through the outlet, thereby eliminating a possible malfunction of the element.

We invite you to familiarize yourself with the transportation bolts on the washing machine (20 photos): how to remove them? Where are they located on the washing machine? What do they look like? How to install and what to replace?

A faulty power button can also cause the washing machine to not respond to commands. In some units, the current supply through the power cord goes directly to the power button; that is why its breakdown can negatively affect the startup of the equipment.

To check the functionality of the button, it is best to use a multimeter. The device should be switched to buzzer mode and the button should be ringed first when it is turned on, then when it is turned off. The machine must be de-energized. If the multimeter makes a sound when the button is on, it means the button is properly supplying power from the network. In the off position, it should not ring through the multimeter.

Another possible cause of the malfunction is a breakdown of the network interference filter (IPF). The device is needed to protect the washing machine and nearby equipment from power outages. When it breaks, current cannot flow through the circuit, so it is impossible to turn on the washing machine.

In most washing machines, the surge filter is mounted on the body, under the top cover.

To avoid damage, you should find the location of the filter in the machine. In Samsung, LG, Indesit, Ariston, Ardo, Bosch, Zanussi, Electrolux, Beko machines it is usually attached to the body, under the top cover. To check the serviceability of the part, you can ring the filter using a multimeter. If the device detects only the incoming voltage, but no current flows at the output, then the FPS needs to be replaced.

When all of the above reasons have been excluded, the control module should be checked for damage. If you do not have sufficient knowledge in the field of electronics, it will be difficult to independently identify the malfunction of this part. In such a situation, it is necessary to entrust the diagnosis to a specialized specialist who can detect the problem and, depending on the cause, replace or repair the module.

If the machine reacts to startup with the light of one indicator, we can say that it turns on, but does not work. After turning it on, it is impossible to fill the drum with water, select and set the washing mode - the equipment does not respond to any commands. In this case, the problem may lie in a wide variety of reasons.

First, check whether the hatch door is tightly closed. It should automatically lock after starting the wash program. If the door closes with a characteristic click, but after the wash starts it does not lock, then the problem lies in the washing machine hatch door locking device.

You can check the serviceability of the hatch door locking device yourself

You can check the blocking yourself by ringing it with a multimeter. If the device detects the supply of voltage to the device after starting the program, then it is working properly. Otherwise, the hatch locking device needs to be replaced.

Other reasons that the equipment refuses to work may be hidden in a malfunction of the control module or a breakdown in communication between the control panel and the module. Such problems must be resolved by specialists.

You connected the washing machine to the network, it started, but suddenly all the lights turned on or began to blink chaotically. Signs such as these may indicate a wiring problem.

In such a case, you will have to either completely replace the wiring in the house, or repair the part that is causing the problem. The breakdown may be due to loose contacts, which can easily be repaired on your own. Also, blinking indicators sometimes indicate damage to the software module.

If, when you turn on the washing machine, all the indicators light up at the same time, this indicates problems with the contacts or wiring.

If the washing machine doesn't turn on the first time, there's no reason to panic. Perhaps the problem is not serious and you can solve it in a few minutes. If none of the proposed methods yielded results or you were unable to understand the intricacies of the repair, it is best to entrust the work to the service department.

How to determine the validity of a fuse

The process for determining the continued serviceability of a part is as follows:

multimeter

You need to take a multimeter and set the device to measure current and voltage.
If a part is damaged, another one is needed to replace it. In terms of price, these things are usually inexpensive. Currently, it is not difficult to purchase this item, either in a store or order online. The only caveat is that you need to clarify the name of the model.
Replacement is carried out in the reverse order of removal.

In most cases, when the washing unit stops working, the most likely cause is a broken fuse.

Advice: if you don’t have a multimeter at home, you can use another method, namely, hold a transparent cone up to the light and examine the presence of a thin wire in it; if it is intact, then the fuse is operational, and if it is broken, then this means that the element has become unusable.

Additional recommendations

List of business tips:

If the washing machine was recently purchased from technical equipment and the warranty period has not expired, then there is no need to carry out independent repairs; the best solution would be to contact the retail outlet where the machine was sold.
If you do not have the skills to repair the electrical part, you should not experiment; let the craftsmen deal with this issue.
When deciding to carry out repair work yourself, you should carefully study the manufacturer’s instructions.
Children should not be allowed to carry out repairs; they do not have knowledge of basic electrical engineering.

If you have any doubts, you should contact a repair shop or call a specialist to your home. Service workshops usually have all spare parts in stock, including an assortment of fuses. A guarantee is provided for the work performed.

About security

Before you replace or disassemble the electrical part of the washing machine, you should not forget about your own safety. A current of 0.1 ampere or more is fatal to humans.

Therefore, the following measures should be taken:

De-energize the technical device.
Work with rubber gloves and preferably on a dielectric mat. This is necessary if there is residual voltage in the electrical circuit.
Do not come into contact with water during operation. Everyone knows that water is an excellent conductor.
Check all tools for cracks, chips and metal hardening to avoid injury.

Like any other work, disassembling the electrical circuit and replacing the fuse should be carried out by two people.

Question details

Electrical problem

If your Indesit washing machine turns off and shows no signs of life, then do not panic. The problem is not necessarily with the machine. Perhaps something happened to the power grid. If there is light in the entire apartment and other sockets are working, then you need to check the power of the socket. Just turn off the machine and plug another electrical appliance into this outlet that is in good working order. If the device does not turn on, then you need to repair the socket. Do it yourself if you have the required skills, or invite a specialist.

Important! Disconnect the power supply before carrying out any manipulations with the outlet.

Problem with FPS or network drive