✅ How to put a belt on an Indesit washing machine

The belt in a washing machine is a very important part that is necessary to rotate the drum. It is put on the engine and on the pulley that is screwed to the engine.

The rotation of the drum begins with the operation of the motor, then the rotational movements are transferred to the pulley. This design is very simple and in most cases is used in various industries.

Sometimes cases arise when the belt falls off and the drum stops spinning. Repairs will require a little effort and time.

How to put on a belt in a washing machine

The strap in a washing machine is one of the most important parts, without which the machine simply cannot work.
It is put on the engine installed in the machine and on the pulley located at the point where it is attached to the motor. To set the drum in motion, you need to start the motor, from which the rotation is transferred to the pulley. There is nothing complicated in the design of this design and it is often used in a wide variety of industrial sectors. If the belt falls off for some reason, the drum of the machine will not spin. In this case, you need to return the belt to its original place. How to do it right? Let's look at this issue in more detail.

Article on the topic: How to open the drum of an automatic washing machine

Signs of a broken belt

When a belt falls off or breaks, the car starts to operate differently. The reason for the stop lies in the interruption of the process of transferring energy from the engine to the drum. The rotation continues, but the drum stops and completes its rotation (unless this is provided by the washing method). The damage may not be immediately noticeable.

The machine can be equipped with an automatic diagnostic system, which will notify you of a problem with sound signals. If this does not happen, then the missing element can be determined by external indicators:

the engine runs, but the drum does not rotate;
uneven humming and jerking of the engine;
the electronic shell freezes and shows incorrect data;
weakness of the drum, the ability to scroll by hand.

Purpose

If you do not take into account the electronic component of the washing machine, which allows you to control various washing modes, then the internal structure of the unit seems relatively easy to understand.

Consequently, the main part of the machine includes a drum into which things are loaded, and an electric motor that drives a cylindrical drum through a flexible belt.

This is done in the following way: a pulley (wheel) is installed on the back side of the drum. The friction mechanism, which is a steel wheel with a groove or flange (rim) in a circle, is driven by the friction force generated by the tension of the belt.

A wheel with the same interaction, only with a smaller diameter, is installed on an electric motor. Both pulleys are connected by a drive belt, the key purpose of which is to transmit torque from the electric motor of the washing machine to the drum. The torque of the electric motor from 5000 to 10000 rpm is prohibitively large. To reduce the number of revolutions, a light pulley of large diameter is used, rigidly fixed on the axis of the drum. By changing the rotation from a small diameter to a large one, the number of revolutions is reduced to 1000-1200 per minute.

Many people make mistakes with the belt marking when purchasing. It is recommended to first remove the old element and take it with you to buy an exact replacement. The seller will inspect it, clarify the markings and offer you the desired option. In addition, you can use the Internet to purchase, but you will still have to indicate the exact labeling of the product. Most often, the following markings are purchased for Indesit washing machines:

MEGADYNE EL 1187 (1195) H7;
HUTCHINSON 8PHE 1195;
CONTITECH EL 1195 H7 and others.

Article on the topic: How to open an Ariston washing machine

When choosing a replacement part, be sure to check its length and type. For Indesit machines, two types are installed - wedge and half-wedge. The first type is found in machines with an asynchronous motor; the cross-section resembles a triangle or trapezoid. The main difference is increased tension, small deflection in the center.

A product in the form of a half-wedge is used in SMA with a commutator motor. The element is a gear train and is tensioned somewhat weaker.

What to do

A person whose washing machine is broken has two options: fix it yourself or use the help of specialists. The first is considered cheaper, but with a lack of experience and the presence of complex problems (damage to bearings or destruction of the shaft), there is a possibility of even more severe damage to the unit.

It is recommended to use the services of specialists. Benefits of technical support:

guarantee of operation of the mechanism for the period specified in the documents;
work of trained specialists with practical experience;
replacement of damaged parts with analog ones and related recommendations.

If the element comes off for the first time due to strong rotation and there are no other consequences from the problem, then you can replace it yourself.

In other cases, you will have to act at your own peril and risk.

Choosing something new

If the belt breaks or becomes unusable due to the end of its service life, it should be replaced. The choice of part is carried out in accordance with the technical parameters of the old element, otherwise incompatibility may occur. To understand, you should read the technical documentation of the machine, find information about the belt and purchase a replacement from the same manufacturer for the same model. Products from other manufacturers may not be suitable.

How to install

The process of manually installing a purchased element for a washing machine:

Disconnect the unit from the power supply and water supply.
Open the cover on the back of the case.
Remove the old belt. To do this, just grab it with one hand, move it to the side, and start rotating the pulley until the part is removed.
Put on a new one. Throw the loop onto the shaft, pull it to the edge of the pulley and rotate to put the part on completely.
Close the lid and connect the machine back.

After replacement, you should run a test wash to check the functionality of the new part.

Replacing the belt on an Indesit washing machine

The main task of the washing machine drive belt is to transmit torque from the motor shaft to the drum of the unit for washing clothes. But from prolonged use, the element can wear out or completely break. To replace the belt or simply tighten it, you will have to disassemble the device. Today we’ll try to understand how to change the belt on an Indesit washing machine.

Expert advice

One of the most common factors for belt slippage is increased load; therefore, to increase the service life of the product, experts recommend keeping the weight of the laundry loaded into the drum under control and trying not to exceed the maximum load of the washing unit.

See the manual and all attachments to the machine to carry out the necessary measures (and do not throw them away immediately after installing the unit). With proper operation, the machine will serve you for a long time.

And one more thing - as a rule, during normal operation, the drive belt of a washing machine can withstand use for a period of 4-5 years. Therefore, the recommendation is that it is advisable to buy this important element in advance, so as not to carry out emergency work later.

How to change the belt on an Indesit washing machine, watch the video.

Installation process

Let's figure out how to put on or tighten the belt on a washing machine. Regardless of the model of the washing machine, this part is worn the same way. Armed with a hex screwdriver, get to work. What do we have to do:

Disconnect the SMA from the network.
Turn off the water supply and disconnect the inlet hose. Be careful, water may pour out of it.
To remove the back panel, on some models you must first remove the top panel.
Unscrew the screws securing the top cover from the back. Take it away.
Remove the bolts securing the rear panel. Set it aside.

You will see the drive belt. Pull it towards you and turn the pulley with your other hand. If it just fell off, get it out of the car.
To install the element in place, you must immediately pull it onto the engine pulley.
Now thread it onto the drum pulley, gradually turning it counterclockwise.

Article on the topic: How to descale heating elements in a washing machine

Then the part should fit neatly on the pulley. Give the pulley a couple of turns to check.

Reassemble the car in reverse order. Reinstall the back panel first, then the top cover. Connect to the network and run the program to check the installed drive belt of the washing machine.

As you can see, anyone can carry out such repairs, if desired - there is nothing complicated about it. The main thing is to choose the right replacement. Therefore, carefully rewrite the markings and select a part only for your SM model.

A video on the topic will help you:

Instructions for performing work

To put on a drive belt that has simply fallen off, or to install a new one to replace a broken one, you need to carry out a simple algorithm of actions. Step-by-step instructions for performing the work will be as follows.

When the reason for the failure of the automatic machine has been determined, proceed to its elimination. If the belt is intact and has simply fallen off, tighten it back. If it is torn, install a new one.

Put the belt in place as follows: carefully pull the element onto the electric motor shaft, then onto the drum pulley. When performing these manipulations, it is necessary to tighten the belt with one hand and slightly turn the pulley with the other. Please note that the drive belt must be located directly in a special groove.

After the faulty part has been replaced, it is necessary to screw the back cover of the unit housing into place. Don’t forget to secure it with the bolts you removed at the beginning of the work. Next, the washing machine is connected to utilities and connected to the network.

You can fix a breakdown caused by a faulty belt on an Indesit machine with your own hands, without turning to a repairman for help. However, keep in mind that there are some very tight drive elements, and you may need the help of a family member to tighten them.

Source

Should I put on the belt myself?

The user can conduct an initial inspection of the washing machine independently or invite a specialist. Before starting repair work, it is necessary to review the warranty card. It is possible that repairs can be carried out without payment. Manufacturers such as Samsung, Veko and others provide a 3-year warranty.

If you have no experience or skills regarding the installation of a washing machine, it is better not to take risks and invite a specialist. Although putting a belt on a pulley is not difficult, non-professional intervention can lead to aggravation of the situation, namely:

the likelihood of over-tightening the tape and breaking it;
damage to fastening parts;
belt twisting and others.

To obtain a guarantee for work and high quality service, it is recommended to seek help from service centers. Professionals will fulfill their obligations and use original spare parts. They have the appropriate competence.

If the equipment is under warranty, the belt will be replaced free of charge in a specialized department. To prevent breakdowns in the future, users are offered a washing machine maintenance service from specialists. Regular inspections will help prevent failure of any part.

Article on the topic: Where is the drain filter in a washing machine

Replacement algorithm

First, you need to disconnect the machine from the electrical network and communications in order to more conveniently position the equipment. The machine must be turned towards you with the back wall. Then follow the instructions:

Symptoms of a faulty belt

The belt in a Samsung washing machine is a weak point. It wears out after just three years of using the machine. This is because Samsung machines use a three-strand silicone belt, so its strength leaves much to be desired. You can tell that the belt is faulty by the following symptoms:

The drum in the washing machine does not rotate, although you hear the motor humming;
when the drum is lightly loaded, the engine cannot rotate it, you see how the drum jerks and does not start to rotate, this means that the belt has stretched;
the drum stops rotating when fully loaded, but rotates well when the load is small;
A belt malfunction can be detected by shuffling sounds, but this is the case when the belt has delaminated and touches the body of the machine. This is dangerous because parts of the belt can catch the electrical wiring and break it.

Thus, there is no need to delay replacing the belt. This type of problem must be corrected immediately. We hope that now you know how to change the belt in a Samsung machine, and the spare part can be bought at any store, and it will cost you about 1,500 rubles. For other malfunctions of cars of this brand, read the article

Types of belts and features of their installation

V-belt

The cross-section of the belt is trapezoidal; chloroprene rubber, cotton fabric and polyester cords are used for its manufacture. This gives it high strength and elasticity.

If the tension is weak, it often slips, so you should tighten it in such a way that the deflection at the moment of pressing its middle part with sufficient force does not exceed 5 mm. Weak belt tension can also cause the power level to be insufficient for the spin operation and cause malfunctions during the washing process.

To tension this type of belt, it is first loosened by moving the engine. If the design of the washing machine does not allow tension adjustment, the V-belt must be replaced. It is deepened as much as possible into the groove on the pulley, while rotating the drum pulley until the belt is completely seated in the hole. This belt is used in units with asynchronous motors.

Poly V-ribbed belt

This type of belt is installed in machines equipped with commutator motors. It has a jagged cross-section formed by rows of wedges. May have different length, width, shape, number of wedges.

To control the tension, a belt of this type is rotated in the middle part along the axis. As a rule, it is weaker compared to a monocline product. If the poly V-belt fits tightly enough, significant force is required to install it.

The installation process is similar to the installation of a V-belt, but after completion it is necessary to check the position of the element. It should be in the middle of the mating side of the pulley in the area of the motor and drum.

Article on the topic: Where is the heating element in the Electrolux washing machine

Replacing the belt in an Indesit washing machine

Indesit washing machines are not prone to breakdowns before the end of the operating period, and yet, during long-term operation, certain malfunctions will appear. One of them is belt wear, which leads to complete or partial inoperability of the equipment. To fix the problem, you need to contact a specialist.

Indesit offers its services for replacing the washing machine belt to residents of Kyiv and its suburbs - we guarantee fast and high-quality service for equipment. After placing your order, the master will be ready to start work on the same day at a time convenient for you.

We localize the breakdown

There are quite a lot of signs indicating that a drive element of an automatic machine has failed. Firstly, this is the error code displayed by the unit, which is shown on the electronic display, and if it is absent, it is displayed by certain indicators.

The next obvious sign indicating a breakdown of this kind will be a drum that does not rotate during the washing process, or a situation where its rotation occurs very slowly and is accompanied by scraping sounds.

Important! This breakdown is quite serious, since when the belt breaks, the power wires may break or damage any sensors.

Why does the Indesit washing machine belt break? There can be quite a few reasons.

Drum pulley malfunction. This is caused by incorrect loading of laundry, exceeding the permissible weight of things placed in the machine, the occurrence of an imbalance, etc. Under the influence of these factors, the belt may come off, break, or weaken.
Natural wear and tear. Any thing can wear out over time, and, often, only a few parts function properly throughout its entire service life. Premature wear of the drive belt can be caused by the daily use of the machine, as well as its design (in narrow SMAs, the belt wears out faster than in standard models).
Incorrect loading of laundry. Exceeding the weight of loaded laundry allowed by the manufacturer leads to an imbalance in the drum - things shift to one side. During the spin process, which occurs at high speeds, the drum may accidentally hit the tank, which will cause the drive belt to jump off.
Failure of the bearings necessary for uniform, correct rotation of the drum. Problems with bearings will lead to increased vibration of the pulley, which can cause the drive element to tear or fly off.
Very rare use of the washing machine. It would seem that the less you use the machine, the more durable it will be. This is not entirely true. As for the belt, with infrequent use, parts of it shrink. During subsequent washing cycles they are erased, which entails stretching and breaking of the drive element.

If it was still not possible to prevent the root cause of the breakdown, the problem should be eliminated as soon as possible. Let's talk about how to replace the drive element in Indesit washing machines.

Repair and replacement of the drive belt on a washing machine

One of the most common faults is drive belt wear. This is the most important part in the design of washing machines of the Samsung, Indesit and Zanussi brands. It connects the pulley attached to the drum and the motor. Thus, this part is responsible for the main function of the device, setting the drum in motion and ensuring its uniform rotation.

If a problem occurs, the drive belt may fly off or break. In this situation, the machine completely fails because the drive stops functioning. The condition of such an important part must be constantly monitored, checking for defects. If you only encounter repairs once, don't worry. You can independently, without the help of a specialist, put the belt back on the engine and continue operation. If a problem occurs on a regular basis, it is necessary to find out the cause of its occurrence.

Article on the topic: Why does the washing machine drum beat?

The most common brands of washing machines are Samsung, Indesit and Zanussi. The quality of the Samsung brand is proven by positive reviews from a huge number of housewives around the world. Several reviews are given in this article. The Samsung s821 washing machine has become the flagship of the model range. This is a compact and quiet machine, with simple and intuitive controls. It is durable and does not require frequent repairs. Model s821 has a pleasant design and good washing quality. Samsung cars are very easy to repair, even on your own. For example, watch how to replace a belt on a Samsung washing machine in the video.

Reasons why replacement is required

Rapid wear of a part occurs due to irregularities during operation, or the design of the washing unit directly or indirectly affects this element. Let's look at the probable reasons in more detail:

the narrow body part of a washing machine from the Indesit company is capable of influencing the element, increasing the degree of its wear. This happens due to the fact that the drum is closely ground to the engine, and during operation (especially during spinning), the element begins to create strong vibration, coming into contact with the belt. The part wears out due to friction on the body or drum;
the pulley breaks. This part is made of brittle metal; over time, chips and cracks form on it, causing the drive belt of the Indesit washing machine to break. At best, it just jumps off the pulley. In addition, the reasons that the belt flies off the pulley may be violations of the loading of things associated with exceeding the permitted weight;
the pulley may begin to vibrate after a bearing falls out or breaks. The belt begins to experience increased load, from which it can fly off or break completely;
To give the tank of the washing unit a constant position, the machine has springs and shock-absorbing devices. When the machine is overloaded with things, the drum can sag, which contributes to wear or tearing off the pulley;
Failure caused by wear and tear is typical for Indesit washing machines, which have a front-loading option. The fact is that five to six years after the start of operation, the tank of the machine is slightly deformed, and the load on the part increases;
The belt often breaks on a car that is rarely used. During long breaks, the rubber material simply dries out, losing its properties. When they start using the machine, the part quickly wears out, stretches and breaks.

In order not to have to constantly replace the belt in the Indesit washing machine, it is necessary to eliminate the reason why it flies off or breaks during the repair process.

DIY repair

Let's find out how to get to the damper. Proceed as follows:

Let's assume you've already removed the top cover.
Turn off the water supply and disconnect the inlet hose from the housing. There may be water in it, so prepare a container to drain it in advance.
Now you need to remove the front panel. To do this, pull out the dispenser tray: press the latch in the center and pull the tray towards you.
Remove the screws that secure the control panel. Two or three bolts are located behind the tray and on the opposite side.
Release the plastic latches.

Take a photo of the location of the wires on the panel and disconnect them or place the panel on top of the CMA body.
Open the hatch door. Having bent the sealing rubber, use a screwdriver to pry up the metal clamp and remove it.

Tuck the cuff inside the drum.
Unscrew the hatch lock bolts (UBL).
Disconnect the wiring from the locking device and pull it out.
Unlock the panel latches at the bottom where the drain filter is located and set it aside.
Unscrew the screws securing the front panel and remove it.

Place a nut on the back side of the rod mount to disable the latch.
Grasp the rod with pliers and pull it towards you.
Now unscrew the bolt at the bottom.

Article on the topic: How to disassemble the Ariston avsd 109 washing machine

Some users are wondering: how to check shock absorbers when purchasing? Same as when replacing. Squeeze and unclench the part in your hand: if this is difficult to do, then the product is working properly. If you compress the shock absorber easily, it needs replacement.

How can you repair a shock absorber in a washing machine with your own hands? First, pull out the insert that slows down the movement of the rod. If the rod moves easily and quickly, the insert (gasket) is most likely worn out. To replace it:

Take a 3mm thick belt.
Measure the length according to the diameter of the hole.

Insert the cut piece of the belt into the place of the seal so that the edges fit tightly together.
Before installing the rod, you need to lubricate the part to reduce friction. If you don’t know how to lubricate the shock absorbers of your washing machine, use regular lubricant oil.
Install the stem. Now you know how to fix a washing machine shock absorber.

For more information about the repair, watch the video:

Watch this video on YouTube

Details may vary between different SM models, so don’t buy at random. In the store, tell the salesperson the brand and model of the washing machine, and he will offer you the appropriate items. Or go shopping with an old damper. Be sure to select the appropriate spare part before replacing the shock absorbers on your washing machine.

To install, insert the rods first, securing the top. Then tighten the bolt at the bottom and assemble the machine. The renovation is complete. Having figured out how to change and check the shock absorber on a washing machine, you can begin to work on your own. Buy new parts or repair old ones - the choice is yours. The video will help you:

Article on the topic: How to say a washing machine in English

Watch this video on YouTube

How to remove and change?

Replacing a worn cuff can be divided into three stages:

disassembling the washing machine and removing the worn element;
installation of a new rubber seal;
Reassembly of the washing machine.

In order to get to the worn cuff, the LG washing machine will have to be disassembled.

Algorithm of actions:

Remove the top panel (to do this, unscrew the fixing bolts located on the rear wall);
We take out the detergent dispenser (press the blue plastic “tab” inside the tray and pull out the powder receptacle);
We dismantle the control panel (to do this, unscrew the screws located in the niche of the powder receptacle, and then press out the special latches holding the panel).
It is necessary to remove the control panel extremely carefully. Behind it are cables and contacts. Nothing needs to be disconnected. We simply carefully move the dismantled panel to the side.
We remove the decorative strip on the front panel. Using a flat-head screwdriver, open the hatch cover (you can find it at the bottom of the front panel), after which in the opened niche we unscrew the screws holding the decorative strip. Additionally, we move the hose to the side for emergency drainage of water. To carefully remove the panel, it is pulled off the latches, first from the right and then from the left side.
Remove the front hatch cuff clamp. To do this, open the hatch door using a flat-head screwdriver, pry up the spring, move it to the side, and remove the front clamp. If you don't have a flat-head screwdriver at hand, you can pry and remove the spring with a dull table knife.
We dismantle the UBL (hatch blocking device). To ensure that nothing interferes with the work, before unscrewing the bolts securing the UBL to the body (located to the right of the hatch), the rubber cuff is tucked inside the drum.
We dismantle the front panel of the LG washing machine. Using a Phillips screwdriver, unscrew two bolts from the top and three bolts from the bottom. There is no need to remove the hatch door from the front panel.

After the machine body is disassembled, you can proceed directly to the process of dismantling the old worn rubber cuff.

Algorithm of actions:

remove the hose fixed to the cuff fitting;
dismantle the internal clamp (holds the rubber seal on the washing machine tank) - to do this, use a flat screwdriver to pry up the spring and pull out the clamp;
dismantle the rubber seal (cuff) - in order to remove the seal from the grooves, you need to firmly grasp the rubber with your hands and pull it towards you; you should not be careful, since the old worn part will still be thrown away.

After the old seal is removed, the seat is wiped of accumulated dirt and the next stage of repair begins - installation of a new rubber cuff.

Algorithm of actions:

We remove the bushing from the worn seal and fix it on the new cuff.
We install a new seal. To do this, unfold the part with the fitting facing up and put it on the seat.
Before tightening the rubber seal, you need to check whether the arrow on the washer body matches the arrow on the cuff. We also make sure to check the coincidence of the technological notches.
We fix the cuff with an internal clamp. To do this, slightly stretch the spring and pull the clamp onto the seal. To make the process easier, two flat screwdrivers can be used to gently open the clamp.

After the internal clamp is fixed, a tube is connected to the fitting on the seal, and the process of assembling the washing machine begins. The sequence of actions is the reverse of the dismantling process.

Algorithm of actions:

install the front panel;
return the UBL to its original place;
fix the outer clamp;
insert the lower decorative strip on the front panel into the latches;
we mount the control panel, insert the powder receptacle, and return the top panel of the LG washing machine to its place.

As soon as the last bolt on the body is screwed in, the washing machine needs to be tested. To do this, start the rinse mode. If at the end of the process no leaks are found, the repair was successful.

The process of replacing the cuff is in the video:

Causes of belt breakdowns in a car

The main reasons that may result in a breakdown are presented in the table:

You cannot put a lot of things in the washing machine. It is best to wash in two steps than to then spend a lot of money on fixing broken components

Unreliable fastening

Initial installation with problems may affect the operating condition. This is due to damage to the drum pulley, which disables the belt.

If you move the unit and hit it against other furniture, the belt most often falls off. It must be repaired immediately before starting the wash.

The process of self-repair for various causes of breakdown

The repair process directly depends on its causes. Modern technology is able to recognize the nature of the breakdown and report it. Otherwise, try to listen to your home appliances. Belt failures are accompanied by characteristic tapping sounds. And if the drum does not spin, then the malfunction is obvious.

Overloading the washing machine

If you were careless and the washing machine was rebooted, then most likely it is worth checking the correct location of the belt in the rear wall of the unit. When faced with the fact that a component has simply fallen, return it to its place without using improvised tools. The correct location can be seen in the photo.

Unreliable fastening, how to fix the problem?

The belt on the washing machine constantly falls off due to its improper fastening. This is due to a malfunction of the drum pulley. The accessory is a wheel that secures the belt and ensures proper functioning of the drum.

Article on the topic: How to disassemble the Ariston avsd 109 washing machine

The issue can be resolved by completely replacing the belt and pulleys. To do this, simply pull the unit out into the open and unscrew the back panel. This will open up a view of the rear parts of the machine that need repair.

Such a wheel is fixed on one or more screws that must be unscrewed for replacement. The next step is to remove the component along with the belt. Taking into account the model and features of your washing machine, the old part is replaced with a new one.

After tightening the drum pulley tightly, proceed to correctly install the belt. It should lie as shown in the photo. Take the time to correctly select such a component, because failure to match the unit model will lead to new malfunctions.

Deformations and how to avoid them

When purchasing a new washing machine, make sure that the equipment is transported correctly. You should also be careful when installing, especially in small spaces. Any physical influence leads to breakdowns of various types.

It is best to transport it in a special box where the device is secured with foam rubber or thick paper. This way the machine will be intact even if it collides with other objects.

Most often, the belt breaks in a washing machine. Because of this, there is a need to buy a new one. It is necessary to replace the broken part before the first start. This will prevent malfunctions with serious consequences.

Causes of malfunction

The drive belt is one of the most important parts in the design of a washing machine, because it transmits torque from the engine to the drum. Consequently, if it breaks, then further operation of the machine will be impossible until the fault is completely eliminated. A high-quality belt can last for more than one year if the owner of the washing machine follows the rules of use. According to statistics, most drive belt ruptures occur due to the excess weight of the laundry being washed and, as a result, the drum being overloaded. In this case, the part simply cannot stand it: it flies off or breaks.

In a situation where, after the first replacement, the problem systematically recurs, it is necessary to think about conducting a comprehensive professional diagnosis. If we talk about the reasons, the following problems are considered the most common:

natural wear and tear;
loose drum pulley fastening;
unreliable engine mounts;
shaft deformation;
bearing wear;
incorrect tension;
damaged drum cross;
infrequent use of the device.

As mentioned above, prolonged use of the washing machine gradually reduces the life of the drive belt, which leads to its breakage. The drum pulley is also subject to intense loads and strong vibrations, which contribute to the loosening of the fastening mechanism. In this case, this risks not only breaking the belt, but also jamming the drum. Natural wear of the bearings is a consequence of the drum being misaligned, which in turn also leads to the belt falling off. To avoid such troubles, it is recommended to periodically inspect the condition of the components and parts of the device. This will prevent many unwanted breakdowns.

Another reason for a belt break is its incorrect tension, which often happens when an unqualified technician repairs a washing machine. The belt must be tensioned on the pulley with a certain tension. In addition, you must use only original spare parts. You can choose the right part by consulting with professionals or by taking a sample with you to the store, where the seller, after checking the label, will help you purchase the right product.

Rare use of the washing machine leads to drying out of the rubber components, cracking and loss of elasticity. Therefore, experts recommend using the machine at least once a week.