Ardo washing machine malfunctions and their elimination

On this page you can download the user manual for the Ardo J1000 Inox 51/43 washing machine in PDF format, 0.29 MB.
The instruction manual will explain how to use the washing machine, answer most popular questions, and give various recommendations.

On this page you can download the user manual for the Ardo J1000 Inox 51/43 washing machine in PDF format, 0.29 MB.

The instruction manual will explain how to use the washing machine, answer most popular questions, and give various recommendations.

Washing machine ARDO J1000 description

High-quality model, comfortable, economical, Italian assembly. The washing machine copes well with all its functions, washes efficiently, rinses perfectly and spins any items well. The model is narrow, only 45 centimeters. Will fit even in a small bathroom.

The ARDO J1000 washing machine has many useful modes and can handle any type of fabric. Has a loading capacity of up to 5 kg. It washes wool very gently. ARDO will become your best assistant.

Operating manual for ARDO J100. How to download the service manual?

The user manual is easy to download; at the beginning of the page you will see a table:

Right-click on the PDF image, then look for “Save As” in the list, then save the instructions in Russian on your ARDO J1000 PC, for example:

And the last step, select the folder in which you want to save the ARDO J1000 operating instructions, for example on your desktop:

We hope you were able to find the manual for the Ardo washing machine, download it and use it successfully. We wish you pleasant use of your ARDO equipment, a direct download link is available for you.

Ardo washing machine malfunctions and their elimination

_____________________________________________________________________________

_____________________________________________________________________________

• All SMA Ardo models

The Ardo machine worked for more than 4 years without breakdowns. But yesterday it was discovered that there was no water drainage. All modes work, the equipment only makes a hum. What are the possible problems? The main reason is the failure of the drain pump. Three months ago I connected this machine. There were no problems. Today my sister wanted to wash clothes, but the unit won’t start. The display does not light up. Why did this happen? The control unit that transmits the impulse to start the SMA is probably broken. The machine fills with water, the drum rotates, but then finishes the washing process. The reason is that it does not heat the water. The washing procedure cannot continue. What can I do? It can be assumed that the heating element is damaged. You need to replace it. A few months ago we purchased an Ardo washing machine. As of today, it has experienced a breakdown - the laundry has stopped spinning. What is the probable cause? The most obvious problem is the breakdown of the pump that drains the water. The unit does not drain, and therefore spinning is not available. This element needs to be replaced. Recently a problem has been noticed. The SMA cannot open. Apparently the door is jammed. For what reasons could this happen? It looks like there is a breakdown of the UBL. Washing machine A800X. The lock is jammed, is there anything we can do ourselves without contacting a service center? If you know the structure of the unit, then replace the UBL. Ardo A 800 X. After the washing mode, the drain mode does not turn on. When switching to drain mode during delicate washing, it drains. Then I manually switch again to the rinse and spin mode. During normal washing, it works normally until it finishes, draining the water. Read the operating instructions; perhaps on some programs (delicates, wool) a “water stop” is provided for the program. Washing machine A 1000, operation for approximately 10 years. The centrifuge turns on at any washing position, what could be the reason? The centrifuge also turns on when the centrifuge program itself is turned off! Apparently there is a problem with the engine, or rather the tachogenerator. Model Ardo inox 51-43, 4 years. During the last wash, it stopped and the door opened, although the wash did not finish. The door was closed again and set to rinse. After SMA rinsed the linen, it was opened, but the linen was hot. Question: Why did it stop before the complete washing process was completed? And why, after closing the rinse again and turning on the rinse, the laundry was hot, does this mean that the rinse does not turn on without heating the water? It is necessary to carry out diagnostics. The Ardo A1000X washing machine is malfunctioning; when the button is turned on, the network knocks out the plugs in the apartment; yesterday everything was fine. The heating element may be broken or the wiring may be frayed. SMA A800X, year of manufacture 1997. Malfunctions: the water drains, the pump starts to hum, but there is no spin and no self-propelled program selection knob remains in place. Sometimes it collects water in the drum and, when washing, begins to drain it immediately. The laundry spins dry. I'm already lost in the reasons for the malfunctions. Check to see if the drain is clogged. The drain hose must have a loop of at least 40 cm from the floor. The board may be faulty. Stir. machine Inox 51-43, 2002. At first there was a strong noise in the spin mode. Now it washes, rinses, but does not spin (the drum does not rotate). Is it possible to repair it on my own? If the unit does not pick up speed during spinning, then it may be necessary to replace the motor brushes and tachogenerator. If it does not drain before spinning, check the drain; there may be a blockage in the sewer and drain hose. Clean the outlet filter. The drain pump may be faulty. There may be a defect in the bearings of the washing unit. Model A800, she is 5-6 years old. The problem is that after starting it draws water without stopping until it overflows or we turn it off manually. And this happens to her every other time and on different cycles. Please tell me what is the reason and can we repair it ourselves? Most likely the water level sensor is faulty. The Ardo A1000X washing machine (5 kg load) constantly washes and does not spin in all programs, but the controller works. The malfunction may be in the shaft speed sensor (tachogenerator), electric motor, or wear of the electric motor brushes. Also, the motor drive belt may be worn. Washing machine A 1000. Stopped heating the water and started washing longer. The heating element and temperature sensor are working properly. I'm thinking about the control board. If I'm right, what details should I pay attention to? Check the heater on relay. SMA Inox. When spinning at medium speeds, there is a strong noise in the belt drive area. I removed the back cover, the belt is tensioned normally. Could it be that it rotates during the spin cycle? What should you do in this case? Most likely the problem is in the bearings. The spin cycle stopped working. The drum starts to rotate, but does not pick up speed, stops and begins to suck out water again. And so on several times until the working time ends. During the last successful wash there were no signs of damage (odor, noise). The control module is suspected to be faulty. It needs to be replaced. For some reason, my washing machine doesn’t spin the drum normally, it just torments it left and right, left and right, less than a quarter of a turn, and so on throughout the entire wash. In general, it does not wash, but only transfers water, could you tell me what happened to it? The motor will likely lose power or the motor capacitor will need to be replaced, start with the capacitor. Model SMA A1000X. Operated for 2.5 years. During washing, some kind of squeaking is sometimes heard, and more often during squeezing. If you turn it by hand, the problem is the same, but it turns as usual. Is this a serious failure and can it be used further? The drum bearings should be replaced. Washing machine A1000. There is a grinding noise when the drum rotates in all modes. Disassembled - the drum works silently. The electric motor is crackling. I want to replace the bearing. But can it replace an electric motor? It will be easier, but more expensive, to replace the electric motor. Inox 51-43. During the washing mode, it draws in water, then heats it up and drains. In rinse and spin mode, it collects water and drains after a while. In spin mode it just hums. The drum does not rotate, but you can turn it by hand. Most likely, the brushes of the electric motor are worn out and there is no longer enough contact with the rotor, and the motor does not gain power. Check the wear of the brush carbons; if they are less than 1.5 cm, they need to be replaced. We also recommend checking the brush springs; if the brushes are not worn out, the springs may have poor contact with the electric motor. The Ardo A800X washing machine is in operation, with electric module 546013101 (ELMARC H7 DMPA8) - as marked on the sticker. In spin mode, the centrifuge operates as if washing, that is, it rotates at low speeds and in reverse. Several times, simply wiping the board with alcohol from the print side helped, and once I even soldered some questionable areas. Now these procedures have no effect. But, when the voltage was removed from the processor, the centrifuge started after the probe touched leg No. 27 (quartz resonator circuit). What would that mean? The manufacturer supplies the board assembled. According to repair technology, the board should not be repaired. Washing machine Ardo A800X, in operation since 2000. When spinning, it produces a very strong hum, and when washing, it creaks. I opened the back wall myself and determined that the sound was coming from the front of the drum. I can’t find any drawings of the support structure on this side. Tell me, what could it be? The drum bearings are suspected to be faulty. It is also impossible to exclude the possibility of a foreign object getting into the tank. Machine A1000X. While washing it suddenly stopped. After forcibly draining the heated water by opening the door, it stopped responding to any commands, the network indicator is on. The UBL works (when turned on, the hatch is blocked), when 220 volts are supplied directly to the pump, it works. When it is turned on, only 75 volts are supplied to the pump. Why doesn't the unit work? It is not possible to make a diagnosis from the description of the malfunction; you can only make assumptions. The actuation of the hatch lock does not indicate a closed electrical circuit; the UBL must be checked. As a rule, it is also impossible to check the pump without a load. In addition to all of the above, a malfunction of the control module cannot be ruled out, which is problematic to check on your own. SMA A1000. The spin mode switches off spontaneously and the drum rotates slowly until the next mode. The control board and motor need to be checked. Please tell me, I have a machine A800X, 2000. During the last wash, it works, but does not drain the water, and does not spin, but you can hear that the pump is working to drain. The filter at the bottom is clean. Apparently the pump needs to be replaced. Inox machine 51-43. The day before yesterday I washed normally, yesterday I stopped spinning, but I washed. Today I turned on the water, it heats up, drains, but the drum hasn’t made a single revolution. I turned it on, it heats the water itself, drains it, fills it up again and drains it, but does not turn it on until it turns off completely. Check the engine belt and brushes. I don’t know the year of manufacture of Ardo A814, but she is 3 years old. We changed the tires once and a hole appeared in it, this was 4 months ago. During spinning and rinsing, a loud bang and knocking occurred, after which the rubber, which is adjacent to the glass, was partially detached from the drum, and the drum itself dropped down about 3 cm and rests against the back wall of the unit. What could it be? The tank suspension spring may have slipped. SMA A 1000. The spin cycle does not work; during the washing process there is a periodic noise that sounds like a belt slipping. The drain path is probably clogged or the drain pump has failed. Washing machine Ardo 1000. I washed it, drained it, filled it with water again, rinsed it and didn’t drain it anymore. I had to drain it through a filter. What could it be? In work for 9 years. Before that I changed the heating element. There may be a problem with the drain pump. Washing machine model A800, produced April 99, when turned on, the warning light comes on, but water does not fill, no mode starts, only a click is heard - presumably from the window lock. If the signal light is on, then the power button is most likely working, but the hatch lock may be faulty. In the Ardo Inox washing machine, when you turn on the washing program, the drum begins to pick up speed, as if spinning, for about 5 seconds, and then stops, the cycle is immediately repeated several times. What could it be? Probably a malfunction of the engine tachogenerator. Washing machine Ardo 1000. With a small amount of laundry, the wash cycle goes through. With a normal quantity, at the time of washing it makes several revolutions and stops, as if there is not enough power to rotate. When stopped, the lights on the front panel blink as if there is a short circuit. Then it starts spinning a few revolutions again and the process repeats. After some time of such work, the unit stops working without executing the remaining commands. Tell me, please, what could be the reason? The most likely cause of the problem is wear on the motor brushes. The contact between the brushes and the rotor is no longer so good, so with a small amount of laundry there is enough power to spin it, but with a normal load there is no more power. If you replace the brushes, the device will work as before! We bought SMA 2 years ago. Never been renovated. The following situation happened: the machine does not always spin. Those. The washing cycle occurs as it should, but during the spin cycle it begins to pick up speed, and is abruptly reset, the light blinks and then continues the spin cycle, only the speed of the drum is the same as during washing, and so on indefinitely. But it works like this every other time. Possibly a defect in the tachogenerator. Model A1000X. After washing, the laundry sometimes has a disgusting smell, what would you recommend to do to eliminate the problem, maybe clean it with some product. There is no desire to change the unit, because... It has been working fine for more than five years. It is possible that water may enter from the sewer due to partial blockage or improper drainage arrangement. Grounding cannot be ruled out. Try rinsing the SMA with anti-scale agent three times after five washes. The Inox 51-43 washing machine does not draw water in the rinse mode? If the unit does not fill in water for rinsing, then the water supply solenoid valve (WVV) may be faulty. The valve consists of two parts: one adds water to the main wash, and the second to rinse. Most likely, the second part has failed and now the solenoid valve needs to be replaced. The machine stops during rinsing or does not spin completely, please tell me where exactly the tachometer is located? The tachometer is located on the motor shaft, on the side opposite the pulley. Check that the unit drains water completely. The SMA simultaneously fills and drains water, all buttons do not respond, it turns off only when disconnected from the outlet. Problem with the electronic unit.

_____________________________________________________________________________

_____________________________________________________________________________

_____________________________________________________________________________

_____________________________________________________________________________

Troubleshooting and breakdowns in the Samsung SMA Need advice on how to repair the Samsung WF 7452S9 R washing machine. The following happened: the automatic plug breaks when starting the rinse or wash program modes. Read more

How to troubleshoot problems with Beko WMN washing machines. Washing machine WMN 6510 N. When spinning, the tank begins to shake violently and the rubber cuff of the tank begins to slam. At the very beginning of operation in October 2002, the same thing happened. Called the master Read more

Problems with Bosch WLG washing machines - Repair recommendations When the WLG20265OE washing machine operates in any mode (spin, rinse, wash) when setting any speed (100-1000), the machine reaches maximum speed Read more

Questions about operation, malfunctions and service of the AEG SMA I have an AEG AMS 7500i (narrow) machine. When washing, a squeaking (grinding) sound occurs, similar to the squeak of rubber. What could this be and could it cause it to break? What you need Read more

Tips for troubleshooting SMA Ardo SMA SE 1010. It rattled in the pump area, the laundry came out wet. A coin was found in the filter. I removed and disassembled the pump. It turned out that the rotor is something like Read more

Questions about the operation and breakdowns of the Siemens ACS In operation WM10N040OE. When water is drawn into the drum, when turned on, water immediately begins to flow from below. I checked the hoses - they are intact, but they are leaking from all sides. Please tell me what the problem is and how Read more

Problems, adjustments and settings of Whirlpool AWG washing machines Model AWG 223. Was washed for 2 years without problems. Now I have stopped spinning in the rinse-spin mode, just spin. Haven't tested it in other modes. The drain pump is heard, the drum is spinning, but Read more

Recommendations for troubleshooting in SMA Atlant The Atlant 50C81 washing machine is in operation. Instead of rinsing, I accidentally turned on the express wash and, already during the cycle, tried to switch to rinsing without stopping the unit Read more