The time-tested Zanussi 1000 Aquacycle washing machine is a free-standing machine equipped with a removable lid. If you remove it, the model can be used as a built-in one. The machine is equipped with a small-sized drum made of stainless steel. Its maximum loading volume is 4 kg. The dimensions of the model are 60 x 42 x 85 cm. The machine is available in white. The plastic tank is equipped with a wide built-in handle and is divided into three separate compartments: for the main wash, an additional wash and a dispenser for additives.
Control Panel
The small washing machine 1000 is equipped with a “smart” control system. There are 9 wide and convenient buttons on the console:
- on/off;
- start/pause;
- reset/skip;
- delay;
- modes by fabric type;
- spin;
- temperature;
- additional rinse;
- additional functionality.
There is a lamp on the control panel indicating that the hatch is blocked. As soon as the washing process is completed and the door is unlocked, the lamp will go off.
Washing machine Zanussi 1000 – efficiency
The model has a high class of washing efficiency and energy consumption - “A”. The maximum consumption of the machine is no more than 0.19 kWh/kg. As for the spin level, the machine shows weak results - level “C”. Analyzing all the characteristics listed above, we can safely say that this model will be an ideal choice for a small family of 1-2 people.
Safety
The economical Zanussi 1000 washing machine has a built-in function to monitor and control foam formation. If the foaming of the powder exceeds the permissible limit, the machine will instantly react, stop the supply of detergent and begin to drain excess water, replacing it with new and clean liquid.
The model is equipped with an automatic system for adjusting the drum balance during washing and spinning. This function allows you to make the machine more silent, eliminating unnecessary rattling and vibration from the equipment.
Zanussi Aquacycle washing machines: FE and FJE series
The machines of these series have similar functionality and design. The difference between the series lies in their sizes.
Washing machines Zanussi Aquacycle FE 925-N
The FE and FJE series machines are equipped with a number of functions that were not available in previous versions, namely:
- linen imbalance control system;
- cycle stage indication;
- special program for woolen products;
- the “proprietary” system from Zanussi “Eco valve system”, which is a special ball valve in the drain hose of the machine. The valve closes the hose tightly during the washing or rinsing process, preventing water from leaking from the drum, which saves water, detergent and energy and washes with higher efficiency;
- automatic cooling of the drained water to a temperature of 60 degrees, if the cycle was carried out at a temperature of 95 degrees. This allows you to avoid large temperature differences when rinsing and prevents the laundry from becoming too wrinkled.
Washing machine Zanussi 1000 – modes
The modern Zanussi 1000 Aquacycle (FE 1024N) washing machine is equipped with a set of modes that differ according to the type of fabric. The machine has a separate program for washing cotton clothes, synthetic underwear and woolen items. If you need to wash delicate fabrics, turn on the “Delicates” function. For items with labels indicating that they can only be washed by hand, there is a “Hand Wash” option. In addition to standard modes, the machine is also equipped with an economical and preliminary processing program. The model has a multiple rinse function.
Cotton
In this cycle, the machine heats the water to 90 degrees. The maximum load of dry laundry is up to 4 kg. The duration of the program is 130 minutes. The Cotton mode uses more water than all other programs - 52 liters.
Synthetics
Washing synthetic laundry requires a maximum heating of no more than 60 degrees. The user can change the temperature, even turning off the heating completely. The duration of the cycle is 1.5 hours. The maximum permissible load is 1.5 kg. Water consumption per cycle is 45 liters.
Thin fabrics
Mode for gentle processing of items made of viscose, acrylic and polyester. The maximum temperature that the user can set during this cycle is 40 degrees. Heating can be turned off. The maximum dry drum load is 15 kg. The duration of the program is 55 minutes. Water consumption is the same as when processing synthetic fabrics.
Wool
In the wool mode, the manufacturer recommends washing exclusively woolen items. The owner of the machine can adjust the water temperature to his liking, but not more than 40 degrees. In this cycle, the laundry undergoes three rinses and a gentle spin. The duration of the program is 56 minutes. Water consumption – 45 liters. Loading – up to 1 kg of dry clothes.
Getting ready to turn on the machine
So, if your unit is already plugged in and your laundry is ready to be loaded, don't rush into loading it. Please ensure that the following rules are followed first.
- Don't overload the drum, but don't put too few things in the machine either. There must be moderation in everything. The amount of laundry must correspond to the nominal capacity of the machine, otherwise the drum will quickly fail.
- Wash white and dark fabrics separately. This, of course, will not affect the operation of the machine, but it will very much affect the laundry.
- Don't wash silk and wool together; one will invariably be damaged (at best). You can only wash items made from the same type of fabric at the same time.
Article on the topic: Is it possible to wash suede shoes in a washing machine
? If you have followed everything, and now the laundry is already in the drum, you can move on.
Spin and temperature
The spin and temperature in the machine are controlled by separate buttons. The range of set values is quite wide. The maximum spin force in the machine is 1000 rpm. The minimum is 500. The mode can also be set to 700 and 900 rpm. The function can be disabled at the user's request. If it is blocked, after the end of the cycle the machine will simply drain the water.
The temperature adjustment button allows you to set heating from 30 to 90 degrees Celsius. Intermediate values are 40 and 60 degrees Celsius. Water heating, as well as spinning, can be turned off and washed completely in cold water.
Additional features
Changing settings during the wash process
When developing the model, the manufacturer tried to make life as easy as possible for future owners. On the machine, you can change the washing cycle even after starting the mode. The user just needs to press the pause button, and he will be able to change both the washing mode and adjust this or that cycle. For example, you set a program with a spin speed of 900 rpm and suddenly remembered that among the things there are clothes that you do not want to spin. Do not rush to pull the plug from the network and put the unit on forced drainage. Press the pause button and simply change the spin to your desired value.
Opening the hatch while the machine is running
The hatch of this model can also be opened after the cycle has started. To do this, you need to pause the machine and the door will open. But there are some nuances here. Unlocking the hatch will work if:
- the water level in the drum did not rise too high;
- the unit is not in the process of heating above 55 degrees;
- The drum is not rotating at the moment.
Zanussi Aquacycle faults and error codes
Although Aquacycle models are budget, which should already indicate their lower reliability, they do not break down as often as initially expected. Many users boast about the long-term operation of their devices without a single breakdown, which indicates the sufficient reliability of Zanussi.
But it still happens that the washing machine breaks down and needs to be repaired. Of course, you should first understand what happened and try to fix the problem if possible. For example, the water may be turned off, the hose or filter may be clogged, the wrong washing mode has been selected, etc. If there really is a breakdown, you should contact a specialist, since you can only aggravate the problem yourself.
The most common breakdown in the Zanussi Aquacycle 1000 and other models in this line is the lack of water drainage. As a rule, this is due to a broken drain pump that needs to be replaced. The filter, electronics, control and display system may also fail. All this can be easily eliminated if there is a service center and a familiar technician nearby. But in order to know in advance what happened to the machine, whether it is worth repairing or not, it is recommended to remember the error codes, which allow you to at least approximately diagnose the problem.
For the Zanussi Aquacycle series, the instructions define the following error codes:
- E11 - water does not flow into the tank (clogged filter or hose, broken fill valve);
- E13 - loss of tank tightness (water entering the bottom);
- E21 - no water drainage (damage to the drain system, pump or blockage);
- E23-24 - malfunction of the electronics responsible for the operation of the pump;
- E51-59 - malfunctions in the operation of the engine or the electronics that control it;
- E61-62 - the resistance of the heating element does not correspond to the norm, as a result of which the water heats up either too slowly or too quickly;
- E69 - heating element is faulty;
- E31-39 - failure of various sensors (door closing, pressure and amount of water, temperature, etc.);
- E41 - the drum door is not closed.
In general, there are several dozen error codes, they indicate almost all malfunctions. Thanks to them, you can understand how serious the problem is and roughly calculate how much repairs will cost and whether it is worth doing. Error codes are a universal way of self-diagnosis of a machine. To recognize them, you only need one thing - the instructions for the Zanussi Aquacycle 1000 washing machine or any other corresponding model.
Thus, the Zanussi Aquacycle model line of the Italian manufacturer remains relevant and in demand today. Budget washing machines have all the basic characteristics of an automatic washing machine, but are still affordable to the public. The models indicated in the review are suitable for users living independently or for small families who do not need frequent and extensive washing. The devices are compact, easy to operate, and sufficiently reliable. And only in a number of minor characteristics are Zanussi Aquacycle washing machines inferior to more modern and expensive models.
Washing machine Zanussi 1000 - care recommendations
Like any other equipment, this washing machine requires maintenance. In the machine, you need to periodically clean the drain and inlet hose filters, the hatch seal, the powder dispenser, and do not forget to wipe the body with a damp cloth. The use of hand detergents is permitted. It is strictly forbidden to perform external care using alcohol-containing substances.
The hatch seal must be wiped with a dry towel after each wash so that it does not quickly wear out, deteriorate, and does not develop mold or unpleasant odor. Also, before the start of each cycle, the cuffs must be inspected for the presence of foreign objects - buttons, hair, paper clips, toothpicks.
The detergent dispenser must be washed periodically to prevent the formation of hard deposits. The frequency of cleaning depends on the number and duration of cycles. For average use, it is enough to rinse the tray under the tap once a week.
The drain and inlet hose filters must be periodically checked and cleaned if problems arise such as: poor water supply, insufficient drainage and spinning, noise or extraneous sounds. If the machine begins to hum strangely, most likely a foreign object, such as a pin or coin, is stuck in the drain hose. Before cleaning the hoses, do not forget to disconnect the machine from the network and water supply.
Reviews from real users
Most users speak about the machine in a positive way. For many, the machine has served without breakdowns for more than 10 years. The owners, who have not bothered with repairs for a long time, emphasize that they wash on this machine often - up to 10-15 times a week. After 10-12 years of use, the brushes, pump, and drain hose begin to wear out in the machine. These parts are easy to replace and inexpensive.
The owners report that the manufacturer was a success with this model. It's quiet, comfortable, easy to drive and overall well thought out. The entire connection of the machine is neatly hidden under the canopy of the lid, nothing sticks out or protrudes anywhere, unlike machines from other manufacturers.
There are many positive reviews about the compact dimensions of the model. Some owners managed to place it even in a three-meter bathroom.
Washing heavily soiled items
In addition, the manufacturer has provided in its models, including the Zanussi aquacycle 1000, washing modes that can cope with heavy soiling.
- A mode with an additional pre-wash, which starts before the main washing stage. At this stage, the water heats up no higher than 30°. Provides more thorough washing. Cycle times can range from 40 to 115 minutes.
- The stain removal program ensures that items are treated with a stain remover before the main wash. Before starting the wash, you need to pour the stain remover into the special section of the dispenser tray. The water temperature in this mode does not exceed 40°.
Similar programs are also available in the Zanussi aquacycle 1000; the instructions will tell you in more detail about their use.
