Modern Indesit washing machines are capable of independently diagnosing problems in the system and sending an “SOS” to its owner. One of these signals will be the inscription “F11” on the display, and if there is none, the “Rinse”, “Intensive Wash”, “No Spin”, “Quick Ironing” and “Spin” lights will flash. All this clearly indicates that there are problems with draining the water, and in order to continue washing, the problem must be corrected.
It’s not difficult to restore the unit’s functionality on your own: just find out the reason for the F11 error on the Indesit washing machine. Possible sources of malfunction may include a dirty filter, a broken water level sensor, or a burnt-out pump. In most cases, you can diagnose the defect and repair the washing machine yourself. We will describe in detail below how to do this competently and quickly.
What can this code cause?
Error F11 can occur both at startup and during the washing process. For example, the machine suddenly does not want to drain the water, spin the laundry, or stop the cycle it has just started. The cause of this unpleasant situation may be the following malfunctions:
- system failure;
- filter contamination;
- malfunction of the drain pump;
- inoperative pressure switch;
- problems with the control module.
Also, such a code may indicate problems with individual elements of the drain mechanism: pipes, hose, wires. But first you need to rule out a possible system failure and reboot the machine. If after resetting the error, turning it off and rebooting, the washing machine still shows F11, you will have to start repairing it yourself. Possible problems should be checked in order: from the filter, pump and hoses to the control system.
Let's start with the garbage filter
Most often, the source of failure with error code F11 is a clogged filter, in which paper, hair, buttons and other small debris accumulate. All this must be carefully removed without damaging the filtration system. It is necessary to act strictly according to the instructions that are also followed by the technicians in the Indesit machine maintenance services. We act like this.
- First, disconnect the washing machine from the power supply and turn off the water and drain.
- Determine the location of the filter. For most Indesit models of both front and vertical loading types, it is located below behind a special panel.
- Use scissors or a flat screwdriver to pry up the panel and remove the cover.
- Place a rag under the unit and unscrew the filter. You must be prepared for water to pour out of the drain system.
- We carefully clean the unscrewed filter: first we remove large debris, then we clean the deposits with a standard sponge or toothbrush. There is a more effective way to remove limescale and unpleasant odors - soak the filter in water with the addition of citric acid.
- Next, rinse the part under a strong stream of warm water.
Important! The water must be warm, since at high temperatures the plastic may deform and the rubber seal may lose its elasticity.
After cleaning the filter itself, you need to pay attention to the surrounding elements of the drain system. So, be sure to check the mounting hole, shine it through with a flashlight and remove plaque and dirt. We complete the cleaning process by returning the filter to its place and connecting all the pipes. The main thing is that the filter cover fits tightly to the device, otherwise water will leak.
Such cleaning of the filtration system should be regular and carried out every six months. Also useful for the Indesit washing machine is comprehensive wet cleaning of the internal structure every six months.
Comfort and wide functionality
The manufacturer has thought through to the smallest detail the integration of technology into any interior. There is provision for placing a washing machine and dryer in a column or Side-by-Side, as well as 2 options for installation under the countertop (partial or full embedding). Various installation kits are included in the package, some models are additionally equipped with convenient drawers for storing small items.
The functionality of Miele machines is impressive. They are able to provide comprehensive care for clothes made from any fabric, including the most delicate ones. Many devices have functions for drying and smoothing things using steam. A huge number of automatic programs are supported (about 20-30, the exact number depends on the model). A large multilingual display with an indication of the remaining time and a host of other additional options provides increased comfort during operation. Thanks to the delayed start, you can program the program to start at any convenient time.
Modern Mile machines are equipped with a powerful and economical ProfiEco engine. This motor guarantees efficient, silent and economical washing; it does not require additional maintenance. The AddLoad option allows you to add clothes while an automatic program is running. LED drum lighting makes loading and unloading laundry easy. It is possible to connect not only to hot but also to cold water.
The engineers of the German brand also worried about safety. To protect children from getting acquainted with equipment in the absence of adults, 2 protection options are provided: a child lock and a PIN code control panel lock. The modern Water Control System helps to avoid leaks both inside the washing machine and at the water supply connections.
Let's move on to the drain pump
If the source of the error is a faulty drain pump, then the repair will take a different route. Then you will have to carefully inspect the integrity of the pump. The first step is to provide access to the part: unscrew the fasteners, remove the bottom, disconnect the connected wires, loosen the clamps and remove the device. The instructions on what to do next are as follows.
- Clean the pipes.
- Inspect the pump impeller and, if there is any entangled hair, dirt or debris, clean it thoroughly. This action will require dismantling the pump, which is quite easy to do with your own hands.
- It is necessary to photograph the original location of the wiring, disconnect the conductors from the pump, loosen the clamps, pull off the hose with the fitting and turn the housing counterclockwise half a turn.
- Next, we pry up the latches, remove the cover and inspect the mechanism, rubber seals and impeller. After thorough cleaning, we assemble the structure back and install it in its original place, using the photo as a guide.
- Check the pump with a multimeter to rule out the possibility of burnout due to short circuit or overheating. To do this, just set up the measuring device, attach the probes to the contacts and record the value. If the number on the screen is less than one, the pump has burned out and cannot be repaired, and if a three-digit number appears, you must continue troubleshooting.
- Feel the connected hoses from the tank to the pump, placing the washing machine on its side. It is rare, but it happens that a sock or children's clothing gets caught in the rubber sleeve. To remove the blockage, you will have to disconnect the hose from the pump and clean it.
When cleaning the filter and checking the pump does not explain the appearance of error F11 or the pump needs to be replaced, you need to pay attention to the control board triac and water level sensor. It is difficult and unsafe for an untrained person to check their performance, and only a specialist can select a new suitable pump. Therefore, it is better to contact the service department and entrust the Indesit washing machine to professionals.
Interesting:
- Bosch dishwasher errors
- Error F11 in Ariston washing machine
- Error codes for AEG washing machines
- Whirlpool washing machine errors without display
- Miele dishwasher errors
- Error codes for the Indesit washing machine based on blinking indicator
Reader comments
- Share your opinion - leave a comment
Error f11 washing machine Indesit Leave
Understanding the meaning of the fault code, the user is able to fix most problems with household appliances independently, without going to a workshop. Error Indesit f11 does not indicate a serious breakdown. The article will tell you what to do.
Decoding
Error f11 - problem with draining the washing machine. With this problem, Indesit does not spin and remove water from the tank after finishing the washing mode.
Restart SMA
This procedure helps restore the functionality of any equipment controlled by an electronic circuit. Often it malfunctions, and the indicator shows fault codes that are false. Interference from radiating devices, interference on the line, sudden power outages, jumps in Uc values - each of the factors causes a failure. If this is the reason, error f11 can be removed simply:
Unplug the washing machine's power cord from the outlet, wait about 20 minutes, and restart Indesit.
Expert advice
The error does not disappear, look for the “culprit” of the problem.
During operation, you will need to disconnect the cables from the washing machine components. To avoid confusion during assembly, you should sketch out the connections or take photographs.
Assess the condition of the filter
Professionals recommend cleaning the part regularly, at least once a quarter. The filter gradually becomes clogged with fibers and microscopic particles of dirt, and drainage into the sewer becomes difficult or blocked. Even with a working pump, the Indesit automation will show error f11. Remove, wash, reinstall, and the problem with the washing machine will be solved. At the same time, the snail spiral is cleaned of dirt.
To avoid thermal burns from hot water, do not remove the filter from the machine immediately after the washing process is completed.
Indesit washing machine drain filter
Manufacturer Indesit equips its SMAs with “tight” latches. To avoid damage to the plastic, be extremely careful when dismantling components.
Before removal, you need to take precautions: the filter closes the drain hole of the washing machine, and after dismantling it, dirty liquid will flow into the room. A suitable container is placed next to Indesit. In some Indesit models, the lower part is covered with a tray that protects against leaks. A sensor is attached to it that reacts to the appearance of water under the bottom. To avoid damaging the device and the cable, move the cover slightly to the side and then disconnect the signal lines.
Over time, limescale builds up on the plastic. It can be easily removed by soaking the filter in a concentrated solution of citric acid for a couple of hours. Take cold water, then the drug will act on scale more effectively.
Check the pump
The pump is located at the bottom of the washing machine. To gain access to the unit, remove the SMA dispenser, disconnect Indesit from the power supply, engineering systems, and place it on its side, laying a piece of cloth on the floor.
Circulation pump 302488 washing machine Indesit 1
After disconnecting the wires and removing the fixing clamps, the pump body is turned in a circle to the left, slightly recessed, and then freely removed from the washing machine.
Test order
- Assessing the condition of the pump loop - Indesit control board. Breaks, short circuits, melted areas of insulation, carbon deposits on the lamellas of contact groups are the causes of the Indesit f11 error. To eliminate identified defects, the services of a specialist are not required.
Repair of indesit board after cockroaches
- Inspection of the impeller and pump volute. In 90% of cases this is the cause of the Indesit f11 error. The impeller needs cleaning no less than the filter. Debris contained in dirty liquid (hair, threads) blocks rotation, causing the pump to stop and code 11. Scale is removed from the surface of the plastic in the same way as from the filter housing: by soaking in an aggressive solution (5 tsp of citric acid per 1 liter) and mechanical cleaning.
Replacing a faulty drain pump in an Indesit washing machine
- Maintenance of the connecting elbow, pipes. The cavities become clogged over time, and dirt prevents normal drainage of liquid. Delete, error Indesit f11 will be removed.
The drainage system is clogged with sock
- Checking the shaft. Scrolls by hand without difficulty - everything is in order. The motor rotor is made of a permanent magnet, so the rotation is intermittent. It is advisable to lubricate the pump: use graphite or lithol. If, when the shaft wobbles, it moves greatly from the longitudinal axis (exorbitant play), the pump must be rejected: critical wear of the bushings.
- Motor winding testing. The manufacturer Indesit puts different types of pumps in washing machines. The resistance of a working winding, regardless of the pump model, is within 200±50 Ohms. R=0 – short circuit, =∞ – internal break. A large deviation of the resistance value from the specified nominal value is a sign of an interturn short circuit. The testing ends by turning on the washing machine pump motor directly from the outlet. There should be no noise during operation. If the cause of error f11 is damage to the motor winding, it is useless to eliminate - it is economically unjustified: the Indesit pump is replaced.
The pump is easy to install yourself. The main thing is to choose the right product. It’s not possible to purchase an original, look for a pump with the same characteristics: method of connecting electrical circuits (terminals, chips, separately or together, location - rear, front), power (W), mounting features in the washing machine (screws, latches).
Experts recommend paying attention to pumps from the Copreci, Askoll, Leili, and SKL brands. These devices are interchangeable with Indesit pumps if the specified characteristics meet.
Assess the condition of the control board
All washing machine errors are generated by the “brain” of the SMA based on signals from sensors. Problems in this node are the last reason for the appearance of code f11. Do-it-yourself repairs are not recommended. Information from the Internet, from friends, colleagues, who removed such an error without calling a specialist, can bring harm, not benefit. According to experts, up to 90% of lost boards are the result of unprofessional intervention in the circuit. Indesit models and years of manufacture differ in design, and the control modules in them are different. Blindly copying third-party advice will only aggravate the situation and lead to unplanned expenses.
