When operating the Atlant washing machine, faulty situations may occur. The device reports problems in operation using the corresponding code, which is displayed on the display.
Possible situations include F13, which almost always signals the need for repairs.
Why error F13 occurs on the Atlant washing machine and how to fix it, we will tell you further.
Decoding the F13 code
When Atlanta is started, the washing process may not even begin, the device freezes, and after a short time displays error code F13. This situation indicates that an error has occurred in the display or in the control module.
Other signs of a problem situation may include:
- Absence of the usual sound signal to turn on the device.
- The control panel buttons do not respond to pressing.
- “Hanging” of work at various stages of the washing process.
- Water is not heated.
- Unstable engine operation.
If a particular Atlanta model does not have a display, the corresponding LED bulbs serve as an analogue to the F13. Depending on which production series the device belongs to, these may be different diodes.
In OptimaControl the combination is as follows:
- "Prewash";
- "Wash";
- "Water stop."
In models that belong to SoftControl, this combination is:
- "Wash";
- "Spin";
- "Rinsing".
In rare cases, F13 may appear not as a result of a breakdown, but due to a random combination of circumstances and a one-time failure. If this is the problem, then to fix the problem you need to reboot the machine - turn it off from the network for a quarter of an hour, and turn it on again. But in the case when the problem does not go away, you will have to move on to equipment diagnostics and repairs.
Checking and repairing the Atlant washing machine
Autotest can show you the corresponding fault code. But if the Atlant washing machine already displays error F13 on the screen, this means that it’s time to start checking.
What needs to be done to reset errors:
Once you have the board in your hands, you can test its elements with a multimeter. A visual inspection will help determine if there are burnt tracks or parts.
You need to decide whether you can repair the electronic module yourself. In this case, this video will help you:
Causes of occurrence and solutions
Almost always, the F13 coding in Atlanta indicates that expensive repairs related to electronics are coming. To get to the components whose malfunction can lead to failure, you should partially disassemble the Atlant washing machine.
But you need to start not with a screwdriver and opening the case, but by disconnecting the device from communications . In this case, the machine should not only be turned off with the button, it is important to remove the plug from the socket.
Control unit failure
A malfunction of the control unit may be caused by burnout of radio elements or tracks. This situation is most often caused by unstable voltage in the network, due to fluctuations in which there may be malfunctions. The control module in most Atlant models is located at the top of the device, closer to the front panel.
To carry out the work, the Atlant body is disassembled and the top cover is removed. Having gained access to the control unit, do not rush to dismantle it. It is advisable to photograph all wire connections and their location. This will help you install and connect everything correctly after the repair.
The dismantled circuit is removed and worked on separately . A tool will be needed for repairs. You need to start with a visual inspection, since sometimes burnt-out circuit elements are visible to the naked eye.
Radio elements that have burned out are replaced with new ones, and the tracks are soldered. If the damage to the assembly is very significant, you may even need to completely replace the board, but this rarely happens.
An analysis of the state of the control module can be seen in the video:
Failure of the display module
As a result of long-term use or moisture entering the housing, wear and oxidation of parts is possible. To fix the problem, repair or replacement is possible.
Firmware failure
If the firmware fails, the unit may not work correctly and fail . To restore the functionality of the washing machine, the block is desoldered, reprogrammed and returned to its place.
Wiring problems
Electrical wires connect the control module to other components of the device. Since this unit coordinates the operation of the entire washing machine, if signals from it and to it do not pass through, there may be a mismatch in the operation of the device.
In this case, the problem may be not only in the module itself, but also in the wires.
It is possible to check their condition by partially disassembling the Atlant case and gaining access to all components. If a defect is detected, it is important to eliminate it by twisting, soldering, replacing the cable , etc.
Reasons for failure of the control unit
If the machine shows error F13 on the display, you need to check the unit. But first, let’s find out why it might fail.
Before checking the electronic unit, try resolving error F13 like this:
De-energize the Atlant washing machine by unplugging the plug from the socket for 20 minutes. After reboot, connect to the network. Has the SMA displayed a fault code again? This means that it was not possible to reset error F13, you need to look further.
If your Atlant washing machine model has an autotest, you need to run it to check it. How to do this is written in the operating instructions.
Call the master
F13 is almost always a complex failure in the electronics of a washing machine. Dealing with such an issue is most often beyond the power of home craftsmen, and the help of a specialist is required.
For help, it is better to contact companies that provide washing machine repair services more than once. Finding such companies is not difficult on the Internet. If you carefully study the information and read customer reviews, this will reduce the chance of falling for scammers.
Repairing the Atlant washing machine due to the issuance of F13 is an expensive job. Different companies may talk about different amounts. On average in the capital, such work will cost from 2,000 rubles and more; replacing wiring can be cheaper - from 1,600 rubles. If any parts need to be replaced, their cost will be paid separately by the customer.
After the technician has carried out the entire range of repairs, a test launch of the Atlant is carried out, after which a guarantee is issued.
Washing machine Atlant error F13
This brand of Belarusian origin has earned a good reputation in the former Soviet Union. Numerous household appliances are produced under this brand. The list of this equipment also includes washing machines. Of course, the quality of this unit meets all the requirements imposed by the standards. However, there are certain points that do not have the best effect on the operation of this model of household appliances. For example, very often error F13 in the Atlant washing machine causes housewives a lot of inconvenience.
Therefore, let’s try to understand in more detail what this error is, and how an ordinary user can get out of this situation.
Prevention measures
To prevent the F13 code from appearing on the device display, experts advise remembering preventive measures to prevent failures, including:
- The washing machine must be connected to the network through a separate socket with output to the machine.
- If there are power surges, it is better to connect Atlant through a voltage stabilizer.
- Do not allow water to enter the control module or other electronic components.
- It is advisable to place Atlant in a room with good ventilation, this will avoid corrosion, moisture condensation and other problems with the equipment.
- The washing machine should be leveled on a level floor to avoid increased vibration, which can lead to malfunctions of the equipment, and even chafing of the wires.
- If shock absorbers wear out, there are problems with the counterweight and other components that lead to disruption of normal operation and vibration, the problem must be solved in a timely manner. Otherwise, one problem can lead to another, related to the control module, and lead to a more global and financially costly repair.
- When operating the device, do not allow excessive foam to form and escape beyond the tank. This state of affairs can provoke short circuits in the circuit and lead to corrosive processes.
- Unclosed containers with liquids, including washing gels, should not be placed on top of the washing machine. If accidentally spilled, moisture can penetrate the electronic components of the washing machine and cause harm.
Why does error F13 occur on the Atlant washing machine and how to fix it?
When operating the Atlant washing machine, faulty situations may occur. The device reports problems in operation using the corresponding code, which is displayed on the display.
Possible situations include F13, which almost always signals the need for repairs.
Why error F13 occurs on the Atlant washing machine and how to fix it, we will tell you further.
Recommendations
When faced with the F13 problem on your Atlanta, the following recommendations can help:
Before repairing or disassembling equipment, it must be disconnected from electricity.- It is advisable to entrust complex repairs to a professional technician.
- It is recommended to carry out diagnostics and repair of the control module in a workshop.
- Tools for repair and disassembly must be prepared in advance.
- If the washing machine is under warranty, you should not carry out repairs yourself - you need to contact a service center.
- After the removed control unit and other elements have been repaired, they must not only be correctly connected to the wiring, but also securely fastened.
- If there are residues of accidentally spilled detergent on the removed control unit, it must be cleaned. If it gets wet, dry it.
Finding the fault that led to F13 is not a quick task and is quite painstaking, which can take a lot of time.
Abbreviation and explanation
If we consider this device, it should be noted that it has a special display board, which usually provides the necessary amount of information on the operation of the machine. This is an excellent help option in a situation where, for example, the system responsible for self-diagnosis of the device displays an error code on the display. This helps to quickly understand what happened to the unit and how to get out of this situation.
If this concerns a code such as F13, then you just need to see it and open the technical documentation for the washing machine. This will allow you to understand the nature of the error and make it possible to understand what caused it to occur.
In a situation where there is no such screen on it, it becomes very difficult to understand what kind of breakdown is occurring. For this purpose, these models of washing machines were equipped with an indicator panel. The indicators on it light up in a certain order, which signals the user about the presence of the corresponding type of error. If you carefully examine the set of indicators on the device panel, you can see that on the bottom row this type of error is indicated by burning lights of the first, second and fourth order, if you start counting from the left side.
It is interesting to look at the explanation that the unit manufacturer provides when this type of situation occurs. Thus, the documentation notes that we are talking about a faulty state of the control module. This may also indicate a faulty wiring that goes directly to this module.
With this formulation, several dozen breakdowns can be immediately attributed. This explanation is connected with the fact that a semiconductor component can create a problem, and there are a great many of them in the unit. However, don't despair. Upon closer examination of such a situation, one can understand that there is a way out, although not an easy one, from this situation.
Signs of module failure
If this error occurs, you can independently eliminate a number of possible problems. For example, there are a number of indirect signs by which you can find out that it is the unit module that is faulty.
Thus, error F13 in the Atlant washing machine indicates a faulty unit. The reason for this, in addition to the above points, may be several more situations.
Therefore, it is recommended to start the device in automatic testing mode. This can be done by carefully reading the instructions.
Error codes that you can fix yourself
| Error code | Probable Cause | Elimination method |
| None all indicators light up Excessive foaming | – The composition of the detergent is not suitable for machine washing – The washing mode is selected incorrectly – A lot of detergent has been poured into the powder tank | – You need to select a washing powder for automatic washing machines. For normal operation of the SMA, you need to select a different mode that is most suitable for a certain type of fabric. |
| Sel or All indicators are not active | – There is no voltage in the electrical network – There is no contact between the washing machine power plug and the electrical outlet – The machine power button is not pressed | – It is necessary to check the presence of voltage in the electrical outlet by turning on any other electrical appliance – Make sure that the power cord plug is in contact with the outlet. – Turn on the machine by pressing the machine power button |
| door or lighting of the 1st, 3rd and 4th indicators | The door is not closed | Close the door until the lock clicks. |
| F5 lighting of the 2nd and 4th indicators Water supply error | – The hose is not installed according to the instructions – The bend of the hose is immersed in water – No water flows from the water supply – The water supply is turned off, the tap is closed – The inlet hose is pinched – The filters are clogged: in the inlet hose or in the threaded pipe of the solenoid valve – The protective system is activated when there is a water leak in the inlet hose . To make sure, you can check the color of the window in the inlet hose - if there is a water leak, it is red | – The drain hose must be installed according to the instructions – Install the drain hose so that the free part of the water is not in the water – Check the cold water tap, check for the presence of water in the water supply – Open the water supply tap – Lay the drain hose without kinks, thereby freeing access water – Clean the filters – Replace the inlet hose with a new one |
| F4 2nd indicator glows Drain error | – The drain hose is not installed according to the instructions – The drain hose is pinched – The pump filter is clogged – The drainage system is clogged – When washing, a detergent was used that is not intended for automatic washing machines and produces a lot of foam – Uneven loading of items in the drum | – Install the drain hose according to the instructions – Install the drain hose correctly – without kinks – Clean the pump filter – Clean the drain – Select and turn on the “RINSING” program. Rinse the laundry to remove excess suds – Arrange the items evenly in the drum |
